SSD1306 for CH32V003j4m6 error !

[mindonne]

I use library library Adafruit SSD1306 version 2.5.10 for CH32V003j4m6 , when compiling : " fatal error: util/delay.h: no such file or directory #include <util/delay.h> "

[maxint-rd]

Seems like you found that the Adafruit SSD1306 library is not supporting the CH32 core (yet).
In the code you can see this:

#if !defined(__ARM_ARCH) && !defined(ENERGIA) && !defined(ESP8266) && !defined(ESP32) && !defined(__arc__)
#include <util/delay.h>
#endif

The file util/delay.h is something specific for the Atmel Arduino core. It provides functions for milli- and microsecond delay. As you can see the Adafruit code doesn't include that file when compiling for various other cores.

You may get further in compiling this by adding !defined(CH32V00x) or !defined(ARDUINO_ARCH_CH32) into that #if, but you will likely find other issues. I have not yet tried to compile that Adafruit library myself but expect that more modifications are needed.

What is your project about? Are you just experimenting?
In a CH32 project for a particular LCD display, I also wanted to ùse Adafruit GFX. The limited flash space of the CH32V003 required me to make a stripped version of the Adafruit GFX library. Maybe sometime in the future I may find time to attempt to make a CH32 compatible version of Adafruit SSD1306, like I did with Adafruit_SleepyDog, but currently I have other priorities.

BTW: Recently the @hathach added support for Adafruit qtpy ch32v203 board. In this post @ladyada commented that currently no support for other libraries is planned, but that PR's for CH32 support are welcome to be submitted.

[mindonne]

I just experimenting but library ssd1306 does not support for CH32v003j4m6 :(((

[blopa1961]

Use the SSD1306ASCII library by Bill Greiman; it works with the CH32V003.

[mindonne]

Sử dụng thư viện SSD1306ASCII của Bill Greiman; nó hoạt động với CH32V003.

so good, but .... have to take up more memory :(

[maxint-rd]

so good, but .... have to take up more memory :(

I found the CH32X033 to be a nice alternative for projects that don't just fit in the V003. Although it has some issues, the 62k makes things easier to fit. The TSSOP20 pinout is largely compatible, so I use it as a drop-in replacement during development and debugging, (prior to trying to squeeze code size down to fit in the 16k of the V003).

[mindonne]

rất tốt, nhưng .... phải chiếm nhiều bộ nhớ hơn :(
Tôi thấy CH32X033 là một giải pháp thay thế tuyệt vời cho các dự án không chỉ phù hợp với V003. Mặc dù có một số vấn đề, nhưng 64k giúp mọi thứ dễ dàng phù hợp hơn. Chân cắm TSSOP20 tương thích phần lớn, vì vậy tôi sử dụng nó như một giải pháp thay thế trong quá trình phát triển và gỡ lỗi (trước khi cố gắng nén kích thước mã xuống để phù hợp với 16k của V003).

thanks you bro

[maxint-rd]

FYI: In the meanwhile I also played with the newer V006. Like the X033 it has 62kB flash. The TSSOP20 package has a pin-out identical to the V003, so it's even easier to use as a drop-in replacement during development and debugging. I think it's also cheaper than the X033, but doesn't have USB.