chore(deps-dev): bump lint-staged from 15.2.10 to 16.2.0

[dependabot]

Bumps lint-staged from 15.2.10 to 16.2.0.

Release notes

Sourced from lint-staged's releases.

v16.2.0

Minor Changes

• #1615 99eb742 Thanks @​iiroj! - Added a new option --fail-on-changes to make lint-staged exit with code 1 when tasks modify any files, making the precommit hook fail. This is similar to the git diff --exit-code option. Using this flag also implies the --no-revert flag which means any changes made my tasks will be left in the working tree after failing, so that they can be manually staged and the commit tried again.

• #1611 cd05fd3 Thanks @​rlorenzo! - Added a new option --continue-on-error so that lint-staged will run all tasks to completion even if some of them fail. By default, lint-staded will exit early on the first failure.

• #1637 82fcc07 Thanks @​iiroj! - Internal lint-staged errors are now thrown and visible in the console output. Previously they were caught with the process exit code set to 1, but not logged. This happens when, for example, there's a syntax error in the lint-staged configuration file.

• #1647 a5ecc06 Thanks @​iiroj! - Remove debug as a dependency due to recent malware issue; read more at debug-js/debug#1005. Because of this, the DEBUG environment variable is no longer supported — use the --debug to enable debugging

• #1636 8db2717 Thanks @​iiroj! - Added a new option --hide-unstaged so that lint-staged will hide all unstaged changes to tracked files before running tasks. The changes will be applied back after running the tasks. Note that the combination of flags --hide-unstaged --no-hide-partially-staged isn't meaningful and behaves the same as just --hide-unstaged.

  Thanks to @​ItsNickBarry for the idea and initial implementation in #1552.

• #1648 7900b3b Thanks @​iiroj! - Remove lilconfig to reduce reliance on third-party dependencies. It was used to find possible config files outside of those tracked in Git, including from the parent directories. This behavior has been moved directly into lint-staged and should work about the same.

Patch Changes

• #1633 7f9e485 Thanks @​dependabot! - Bumps listr2 from 9.0.3 to 9.0.4.

• #1626 99d5a9b Thanks @​iiroj! - Due to recent phishing attacks, for example [email protected] was released with malware. To avoid lint-staged's users being at risk the direct dependencies are pinned to exact versions, instead of allowing future patch versions with the caret (^) range.

• #1588 035bbf2 Thanks @​outslept! - Increase performance by listing staged files and searching for configuration concurrently.

• #1645 deba3ad Thanks @​iiroj! - Remove chalk as a dependency due to recent malware issue; read more at chalk/chalk#656.

  If you are having trouble with ANSI color codes when using lint-staged, you can try setting either FORCE_COLOR=true or NO_COLOR=true env variables.

v16.1.6

Patch Changes

• #1610 e93578e Thanks @​iiroj! - Try to improve terminating of subprocess of tasks by using SIGKILL, and only calling pidtree when the the main task process has a known pid.

v16.1.5

Patch Changes

• #1608 4e3ce22 Thanks @​srsatt! - Detect the git repo's top-level directory correctly when in a worktree.

v16.1.4

Patch Changes

• #1604 90b37b0 Thanks @​iiroj! - Add another types field to package.json to make even more sure NPM detects that lint-staged includes built-in TypeScript type definitions.

v16.1.3

Patch Changes

• #1602 7ea700b Thanks @​dword-design! - Add the types field to package.json to make sure NPM detects lint-staged includes built-in TypeScript type definitions.

v16.1.2

... (truncated)

Changelog

Sourced from lint-staged's changelog.

16.2.0

Minor Changes

• #1615 99eb742 Thanks @​iiroj! - Added a new option --fail-on-changes to make lint-staged exit with code 1 when tasks modify any files, making the precommit hook fail. This is similar to the git diff --exit-code option. Using this flag also implies the --no-revert flag which means any changes made my tasks will be left in the working tree after failing, so that they can be manually staged and the commit tried again.

• #1611 cd05fd3 Thanks @​rlorenzo! - Added a new option --continue-on-error so that lint-staged will run all tasks to completion even if some of them fail. By default, lint-staded will exit early on the first failure.

• #1637 82fcc07 Thanks @​iiroj! - Internal lint-staged errors are now thrown and visible in the console output. Previously they were caught with the process exit code set to 1, but not logged. This happens when, for example, there's a syntax error in the lint-staged configuration file.

• #1647 a5ecc06 Thanks @​iiroj! - Remove debug as a dependency due to recent malware issue; read more at debug-js/debug#1005. Because of this, the DEBUG environment variable is no longer supported — use the --debug to enable debugging

• #1636 8db2717 Thanks @​iiroj! - Added a new option --hide-unstaged so that lint-staged will hide all unstaged changes to tracked files before running tasks. The changes will be applied back after running the tasks. Note that the combination of flags --hide-unstaged --no-hide-partially-staged isn't meaningful and behaves the same as just --hide-unstaged.

  Thanks to @​ItsNickBarry for the idea and initial implementation in #1552.

• #1648 7900b3b Thanks @​iiroj! - Remove lilconfig to reduce reliance on third-party dependencies. It was used to find possible config files outside of those tracked in Git, including from the parent directories. This behavior has been moved directly into lint-staged and should work about the same.

Patch Changes

• #1633 7f9e485 Thanks @​dependabot! - Bumps listr2 from 9.0.3 to 9.0.4.

• #1626 99d5a9b Thanks @​iiroj! - Due to recent phishing attacks, for example [email protected] was released with malware. To avoid lint-staged's users being at risk the direct dependencies are pinned to exact versions, instead of allowing future patch versions with the caret (^) range.

• #1588 035bbf2 Thanks @​outslept! - Increase performance by listing staged files and searching for configuration concurrently.

• #1645 deba3ad Thanks @​iiroj! - Remove chalk as a dependency due to recent malware issue; read more at chalk/chalk#656.

  If you are having trouble with ANSI color codes when using lint-staged, you can try setting either FORCE_COLOR=true or NO_COLOR=true env variables.

16.1.6

Patch Changes

• #1610 e93578e Thanks @​iiroj! - Try to improve terminating of subprocess of tasks by using SIGKILL, and only calling pidtree when the the main task process has a known pid.

16.1.5

Patch Changes

• #1608 4e3ce22 Thanks @​srsatt! - Detect the git repo's top-level directory correctly when in a worktree.

16.1.4

Patch Changes

• #1604 90b37b0 Thanks @​iiroj! - Add another types field to package.json to make even more sure NPM detects that lint-staged includes built-in TypeScript type definitions.

16.1.3

... (truncated)

Commits

• 54c9bea chore(changeset): release
• da1ec1d build(deps-dev): bump eslint-plugin-n from 17.23.0 to 17.23.1
• 63361a8 feat: flag --fail-on-changes implies --no-revert
• bcde025 docs: removal of debug is "minor" instead of "patch" level change
• 7900b3b feat: remove lilconfig as a dependency
• a5ecc06 feat: remove debug as a dependency
• 616b2d3 ci: use actions/checkout@v5
• d6397a5 ci: use @​actions/setup-node@​v5
• 4499b73 ci: run tests with lowest supported Node.js version 20.17.0
• b4b69e5 fix: pass either FORCE_COLOR or NO_COLOR to tasks based on detected support
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[netlify]

✅ Deploy Preview for kleros-library-of-justice ready!

Name	Link
🔨 Latest commit	f313dbb
🔍 Latest deploy log	https://app.netlify.com/projects/kleros-library-of-justice/deploys/68d133347eb17800081cd63d
😎 Deploy Preview	https://deploy-preview-156--kleros-library-of-justice.netlify.app
📱 Preview on mobile	Toggle QR Code... Use your smartphone camera to open QR code link.

---

To edit notification comments on pull requests, go to your Netlify project configuration.

[dependabot]

Superseded by #159.