stack/devnet: cast command is changed after 1.0

pages/stack/dev-net.mdx

@@ -36,6 +36,7 @@ anyone to modify or deploy the stack in any configuration you want.
 | ------------------------------------------------- | -------- | --------------------- |
 | [docker](https://docs.docker.com/engine/install/) | `^27`    | `docker --version`    |
 | [kurtosis](https://docs.kurtosis.com/install/)    | `^1.3.0` | `kurtosis version`    |
+| [cast](https://book.getfoundry.sh/cast/)          | `^1.0.0` | `cast --version`      |
 
 ### Notes on Specific Dependencies
 
@@ -75,7 +76,9 @@ ethereum_package:
 Now that you've configured your network, you can start it up using the Kurtosis CLI. Run the command below:
 
 ```bash
-kurtosis run github.com/ethpandaops/optimism-package --args-file https://raw.githubusercontent.com/ethpandaops/optimism-package/main/network_params.yaml
+kurtosis run github.com/ethpandaops/optimism-package \
+    --args-file https://raw.githubusercontent.com/ethpandaops/optimism-package/main/network_params.yaml \
+    --enclave op-devnet
 ```
 
 This command will start up your network and deploy the OP Stack based on the ethpandaops configuration. The command will
@@ -84,9 +87,9 @@ the one below:
 
 ```
 INFO[2025-02-25T02:10:37Z] =====================================================
-INFO[2025-02-25T02:10:37Z] ||          Created enclave: proud-crater          ||
+INFO[2025-02-25T02:10:37Z] ||          Created enclave: op-devnet             ||
 INFO[2025-02-25T02:10:37Z] =====================================================
-Name:            proud-crater
+Name:            op-devnet
 UUID:            eb959a72177b
 Status:          RUNNING
 Creation Time:   Tue, 25 Feb 2025 02:07:56 UTC
@@ -159,29 +162,53 @@ At this point your chain is up and running. Let's move on to the next section to
 ## Interact with your network
 
 You now have a fully functioning OP Stack Rollup. You can connect your wallet to this chain the same way you'd connect
-your wallet to any other EVM chain. You can find your node's RPC URL by running `kurtosis enclave inspect <enclave name>`.
-Your enclave name is outputted at the end of the `kurtosis run` command above. The RPC url is the `rpc` port name in any
-of the execution client services identified by `op-el`.
+your wallet to any other EVM chain. You can find your node's RPC URL by running `kurtosis enclave inspect op-devnet`.
+The RPC url is the `rpc` port name in any of the execution client services identified by `op-el`.
 
 ### Depositing funds onto your network
 
-Your network was configured to pre-fund development addresses using the `test test test test test test test test test test test junk`
-mnemonic. To get ETH onto your L2, you import one of the private keys from that mnemonic into your favorite wallet or use
-a CLI tool like `cast`. For the purposes of this tutorial, we'll use `cast` and assume you want to use the first address
-generated by that mnemonic.
+Your network was configured to pre-fund development addresses, you can find the full list of available pre-fund accounts from 
+[here](https://github.com/ethpandaops/ethereum-package/blob/main/src/prelaunch_data_generator/genesis_constants/genesis_constants.star). 
+To get ETH onto your L2, you import one of the private keys from that list into your favorite wallet or use a CLI tool like `cast`. 
+For the purposes of this tutorial, we'll use `cast` and assume you want to use the first address [0x8943545177806ED17B9F23F0a21ee5948eCaa776](https://github.com/ethpandaops/ethereum-package/blob/v4.0.0/src/prelaunch_data_generator/genesis_constants/genesis_constants.star#L10-L14).
 
 To move ETH onto your L2, run the following command. Make sure to replace the values in angle brackets with real values:
 
 ```bash
-cast send --mnemonic 'test test test test test test test test test test test junk' --mnemonic-path "m/44'/60'/0'/0/0" \
-    --to "<standard bridge address>" --amount "<amount in ETH>eth" --rpc-url "http://127.0.0.1:<rpc port of el-1-geth-teku service>"
+cast send "<standard bridge address>" --private-key bcdf20249abf0ed6d944c0288fad489e33f66b3960d9e6229c1cd214ed3bbe31 \
+    --value "<amount in ETH>ether" --rpc-url "http://127.0.0.1:<rpc port of el-1-geth-teku service>"
 ```
 
+The output should looks like below:
+
+
+```
+blockHash            0xf6c18d85ba89b4b1e6060ddf744d8d9084dbb3720e2a2a854627a1b1b7a294ba
+blockNumber          388
+contractAddress
+cumulativeGasUsed    21000
+effectiveGasPrice    1000000007
+from                 0x8943545177806ED17B9F23F0a21ee5948eCaa776
+gasUsed              21000
+logs                 []
+logsBloom            0x000000000000000000000000000000000... # truncated
+root
+status               1 (success)
+transactionHash      0x268f98f883efe9c8f9ecc7542a9c8af51869118cfce06e775683f5b4aec2681d
+transactionIndex     0
+type                 2
+blobGasPrice
+blobGasUsed
+authorizationList
+to                   <standard bridge address>
+```
+
+
 Wait \~30 seconds, then check your balance on L2 by running the following command:
 
 ```bash
 export ETH_RPC_URL="http://127.0.0.1:<rpc port of el-1-geth-teku service>"
-export ADDRESS="0xf39Fd6e51aad88F6F4ce6aB8827279cffFb92266"
+export ADDRESS="0x8943545177806ED17B9F23F0a21ee5948eCaa776"
 cast balance "$ADDRESS"
 ```