WIP: Move to 5.14 based kernel. #32
Closed
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
BugLink: https://bugs.launchpad.net/bugs/2003139 commit 4c92670 upstream. Setup function uvc_function_setup permits control transfer requests with up to 64 bytes of payload (UVC_MAX_REQUEST_SIZE), data stage handler for OUT transfer uses memcpy to copy req->actual bytes to uvc_event->data.data array of size 60. This may result in an overflow of 4 bytes. Fixes: cdda479 ("USB gadget: video class function driver") Cc: stable <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Daniel Scally <[email protected]> Signed-off-by: Szymon Heidrich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2003139 commit f0052d7 upstream. The EM05-G modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0311 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0311 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2003139 commit e88906b upstream. The RF sniffers are based on cp210x where the RF frontends are based on a different USB stack. RF sniffers can analyze packets meta data including power level and perform packet injection. Can be used to perform RF frontend self-test when connected to a concentrator, ex. arch/arm/boot/dts/imx7d-flex-concentrator.dts Signed-off-by: Bruno Thomsen <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2003139 commit a08ca6e upstream. The driver leaves the line speed unchanged in case a requested speed is not supported. Make sure to handle the case where the current speed is B0 (hangup) without dividing by zero when determining the clock source. Fixes: 268ddb5 ("USB: serial: f81232: add high baud rate support") Cc: [email protected] # 5.2 Cc: Ji-Ze Hong (Peter Hong) <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2003139 commit 188c9c2 upstream. The driver leaves the line speed unchanged in case a requested speed is not supported. Make sure to handle the case where the current speed is B0 (hangup) without dividing by zero when determining the clock source. Fixes: 3aacac0 ("USB: serial: f81534: add high baud rate support") Cc: [email protected] # 4.16 Cc: Ji-Ze Hong (Peter Hong) <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2003139 commit fed70b6 upstream. ADL-N systems have the same issue as ADL-P, where a large boot firmware delay is seen if USB ports are left in U3 at shutdown. So apply the XHCI_RESET_TO_DEFAULT quirk to ADL-N as well. This patch depends on commit 34cd2db ("xhci: Add quirk to reset host back to default state at shutdown"). The issue it fixes is a ~20s boot time delay when booting from S5. It affects ADL-N devices, and ADL-N support was added starting from v5.16. Cc: [email protected] Signed-off-by: Reka Norman <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2003139 commit de5dc44 upstream. When a MAC address is not assigned to the VF, that portion of the message sent to the VF is not set. The memory, however, is allocated from the stack meaning that information may be leaked to the VM. Initialize the message buffer to 0 so that no information is passed to the VM in this case. Fixes: 6ddbc4c ("igb: Indicate failure on vf reset for empty mac address") Reported-by: Akihiko Odaki <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Reviewed-by: Akihiko Odaki <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
…system for Raptor Lake BugLink: https://bugs.launchpad.net/bugs/2003139 commit f05f80f upstream. The device ID 0xa70e is defined for the USB3 device controller in the CPU sub-system of Raptor Lake platform. Hence updating the ID accordingly. Fixes: bad0d1d ("usb: dwc3: pci: Add support for Intel Raptor Lake") Cc: stable <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Shruthi Sanil <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2003139 [ Upstream commit 3405a4b ] Commit f7d8e38 ("HID: uclogic: Switch to Digitizer usage for styluses") changed the usage used in UCLogic from "Pen" to "Digitizer". However, the IS_INPUT_APPLICATION() macro evaluates to false for HID_DG_DIGITIZER causing issues with the XP-Pen Star G640 tablet. Add the HID_QUIRK_HIDINPUT_FORCE quirk to bypass the IS_INPUT_APPLICATION() check. Reported-by: Torge Matthies <[email protected]> Reported-by: Alexander Zhang <[email protected]> Tested-by: Alexander Zhang <[email protected]> Signed-off-by: José Expósito <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2003139 [ Upstream commit 6a30d3e ] The latest version of grep claims the egrep is now obsolete so the build now contains warnings that look like: egrep: warning: egrep is obsolescent; using grep -E fix this using "grep -E" instead. sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/net` Here are the steps to install the latest grep: wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz tar xf grep-3.8.tar.gz cd grep-3.8 && ./configure && make sudo make install export PATH=/usr/local/bin:$PATH Signed-off-by: Tiezhu Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2003139 [ Upstream commit 31d929d ] When the name_assign_type attribute was introduced (commit 685343f, "net: add name_assign_type netdev attribute"), the loopback device was explicitly mentioned as one which would make use of NET_NAME_PREDICTABLE: The name_assign_type attribute gives hints where the interface name of a given net-device comes from. These values are currently defined: ... NET_NAME_PREDICTABLE: The ifname has been assigned by the kernel in a predictable way that is guaranteed to avoid reuse and always be the same for a given device. Examples include statically created devices like the loopback device [...] Switch to that so that reading /sys/class/net/lo/name_assign_type produces something sensible instead of returning -EINVAL. Signed-off-by: Rasmus Villemoes <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2003139 Link: https://lore.kernel.org/r/[email protected] Tested-by: Florian Fainelli <[email protected]> Tested-by: Shuah Khan <[email protected]> Tested-by: Bagas Sanjaya <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Sudip Mukherjee <[email protected]> Tested-by: Jon Hunter <[email protected]> Tested-by: Slade Watkins <[email protected]> Tested-by: Ron Economos <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2003139 Ignore: yes Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
…er bits If the offset + length goes over the ethernet + vlan header, then the length is adjusted to copy the bytes that are within the boundaries of the vlan_ethhdr scratchpad area. The remaining bytes beyond ethernet + vlan header are copied directly from the skbuff data area. Fix incorrect arithmetic operator: subtract, not add, the size of the vlan header in case of double-tagged packets to adjust the length accordingly to address CVE-2023-0179. Reported-by: Davide Ornaghi <[email protected]> Fixes: f6ae9f1 ("netfilter: nft_payload: add C-VLAN support") Signed-off-by: Pablo Neira Ayuso <[email protected]> (cherry picked from commit 696e1a4 net.git) CVE-2023-0179 Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Acked-by: Tim Gardner <[email protected]> Acked-by: Stefan Bader <[email protected]> Signed-off-by: Luke Nowakowski-Krijger <[email protected]>
When an ULP-enabled socket enters the LISTEN status, the listener ULP data pointer is copied inside the child/accepted sockets by sk_clone_lock(). The relevant ULP can take care of de-duplicating the context pointer via the clone() operation, but only MPTCP and SMC implement such op. Other ULPs may end-up with a double-free at socket disposal time. We can't simply clear the ULP data at clone time, as TLS replaces the socket ops with custom ones assuming a valid TLS ULP context is available. Instead completely prevent clone-less ULP sockets from entering the LISTEN status. Fixes: 734942c ("tcp: ULP infrastructure") Reported-by: slipper <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/4b80c3d1dbe3d0ab072f80450c202d9bc88b4b03.1672740602.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]> (backported from commit 2c02d41) [cascardo: there is no SOCK_SUPPORT_ZC] [cascardo: backlog parameter on inet_csk_listen_start was removed] CVE-2023-0461 Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Acked-by: Tim Gardner <[email protected]> Acked-by: Stefan Bader <[email protected]> Signed-off-by: Luke Nowakowski-Krijger <[email protected]>
The referenced commit changed the error code returned by the kernel when preventing a non-established socket from attaching the ktls ULP. Before to such a commit, the user-space got ENOTCONN instead of EINVAL. The existing self-tests depend on such error code, and the change caused a failure: RUN global.non_established ... tls.c:1673:non_established:Expected errno (22) == ENOTCONN (107) non_established: Test failed at step #3 FAIL global.non_established In the unlikely event existing applications do the same, address the issue by restoring the prior error code in the above scenario. Note that the only other ULP performing similar checks at init time - smc_ulp_ops - also fails with ENOTCONN when trying to attach the ULP to a non-established socket. Reported-by: Sabrina Dubroca <[email protected]> Fixes: 2c02d41 ("net/ulp: prevent ULP without clone op from entering the LISTEN status") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Sabrina Dubroca <[email protected]> Link: https://lore.kernel.org/r/7bb199e7a93317fb6f8bf8b9b2dc71c18f337cde.1674042685.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]> (backported from commit 8ccc993) [cascardo: there is no SOCK_SUPPORT_ZC] CVE-2023-0461 Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Acked-by: Tim Gardner <[email protected]> Acked-by: Stefan Bader <[email protected]> Signed-off-by: Luke Nowakowski-Krijger <[email protected]>
Problem caused by source's vfsmount being unmounted but remains on the delayed unmount list. This happens when nfs42_ssc_open() return errors. Fixed by removing nfsd4_interssc_connect(), leave the vfsmount for the laundromat to unmount when idle time expires. We don't need to call nfs_do_sb_deactive when nfs42_ssc_open return errors since the file was not opened so nfs_server->active was not incremented. Same as in nfsd4_copy, if we fail to launch nfsd4_do_async_copy thread then there's no need to call nfs_do_sb_deactive Reported-by: Xingyuan Mo <[email protected]> Signed-off-by: Dai Ngo <[email protected]> Tested-by: Xingyuan Mo <[email protected]> Signed-off-by: Chuck Lever <[email protected]> CVE-2022-20369 (backported from commit 75333d4) [agherzan: 1913cdf replaces the boolean fields in nfsd4_copy which now needs adaptations for this patch to use nfsd4_ssc_is_inter, for the nfsd4_do_async_copy conflict there are multiple changes affecting the backport but the code path is simple to adapt for handling the nfsd4_interssc_disconnect call] Signed-off-by: Andrei Gherzan <[email protected]> Acked-by: Tim Gardner <[email protected]> Acked-by: Stefan Bader <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://launchpad.net/bugs/1998905 New HW platforms with multiple CS42L42 parts, faster CPU and i2c requre some extra delay to allow PLL to settle and lock. Adding extra 10ms delay. Signed-off-by: Vitaly Rodionov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> (cherry picked from commit 9fb9fa1) Signed-off-by: Chia-Lin Kao (AceLan) <[email protected]> Acked-by: Tim Gardner <[email protected]> Acked-by: Luke Nowakowski-Krijger <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2000299 why: DCN303's 4 channel SOC BB causes problems at strobe how: workaround to manually adjust strobe calculation using FCLK restrict. Reviewed-by: Jun Lei <[email protected]> Acked-by: Agustin Gutierrez <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Martin Leung <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit a9a1ac4) Signed-off-by: Aaron Ma <[email protected]> Acked-by: Tim Gardner <[email protected]> Acked-by: Stefan Bader <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2003053 POSIX typically only refreshes the user's supplementary group information upon login. Since NFS servers may often refresh their concept of the user supplementary group membership at their own cadence, it is possible for the NFS client's access cache to become stale due to the user's group membership changing on the server after the user has already logged in on the client. While it is reasonable to expect that such group membership changes are rare, and that we do not want to optimise the cache to accommodate them, it is also not unreasonable for the user to expect that if they log out and log back in again, that the staleness would clear up. Reviewed-by: Benjamin Coddington <[email protected]> Tested-by: Benjamin Coddington <[email protected]> Signed-off-by: Trond Myklebust <[email protected]> (backported from commit 0eb4381) Signed-off-by: Chengen Du <[email protected]> Acked-by: Tim Gardner <[email protected]> Acked-by: Luke Nowakowski-Krijger <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2003053 If the user's login time is newer than the cache's timestamp, we expect the cache may be stale and need to clear. The stale cache will remain in the list's tail if no other users operate on that inode. Once the user accesses the inode, the stale cache will be returned in rcu path. Signed-off-by: Chengen Du <[email protected]> Signed-off-by: Trond Myklebust <[email protected]> (cherry picked from commit 029085b) Signed-off-by: Chengen Du <[email protected]> Acked-by: Tim Gardner <[email protected]> Acked-by: Luke Nowakowski-Krijger <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2003053 sparse is warning about an incorrect RCU dereference. fs/nfs/dir.c:2965:56: warning: incorrect type in argument 1 (different address spaces) fs/nfs/dir.c:2965:56: expected struct cred const * fs/nfs/dir.c:2965:56: got struct cred const [noderef] __rcu *const cred Signed-off-by: Trond Myklebust <[email protected]> (cherry picked from commit 5e9a7b9) Signed-off-by: Chengen Du <[email protected]> Acked-by: Tim Gardner <[email protected]> Acked-by: Luke Nowakowski-Krijger <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2004344 Properties: no-test-build Signed-off-by: Stefan Bader <[email protected]>
…3.01.30) BugLink: https://bugs.launchpad.net/bugs/1786013 Signed-off-by: Stefan Bader <[email protected]>
Signed-off-by: Stefan Bader <[email protected]>
Ignore: yes Signed-off-by: Stefan Bader <[email protected]>
When adding "net/ulp: prevent ULP without clone op from entering the LISTEN status" code which changed the error code variable was added. However, without a different v6.2 change which lets ->get_port() return a proper errno, we rely on the pre-set value or the error variable. Adding this right before the call to make it clear where it is needed. CVE-2023-0461 Signed-off-by: Stefan Bader <[email protected]> Acked-by: Tim Gardner <[email protected]> Acked-by: Andy Whitcroft <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2004636 Properties: no-test-build Signed-off-by: Stefan Bader <[email protected]>
Signed-off-by: Stefan Bader <[email protected]>
Ignore:yes Signed-off-by: Tim Gardner <[email protected]>
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
Ignore: yes Signed-off-by: Tim Gardner <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2001758 Properties: no-test-build Signed-off-by: Tim Gardner <[email protected]>
Signed-off-by: Tim Gardner <[email protected]>
Ignore: yes Signed-off-by: Stefan Bader <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2003487 Properties: no-test-build Signed-off-by: Stefan Bader <[email protected]>
Signed-off-by: Stefan Bader <[email protected]>
Ignore: yes Signed-off-by: Tim Gardner <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/2004304 Properties: no-test-build Signed-off-by: Tim Gardner <[email protected]>
Signed-off-by: Tim Gardner <[email protected]>
This is a placeholder commit to separate the Ubuntu kernel source and our patches. Used by kernel_merge_with_upstream() in the linux-pkg repo.
…quire (#8) Upstream fix from kernel 5.12 nfsd: Don't keep looking up unhashed files in the nfsd file cache If a file is unhashed, then we're going to reject it anyway and retry, so make sure we skip it when we're doing the RCU lockless lookup. This avoids a number of unnecessary nfserr_jukebox returns from nfsd_file_acquire() Fixes: 65294c1 ("nfsd: add a new struct file caching facility to nfsd")
delphix-devops-bot
pushed a commit
that referenced
this pull request
May 26, 2023
BugLink: https://bugs.launchpad.net/bugs/2011625 [ Upstream commit d055368 ] The conclusion "j1939_session_deactivate() should be called with a session ref-count of at least 2" is incorrect. In some concurrent scenarios, j1939_session_deactivate can be called with the session ref-count less than 2. But there is not any problem because it will check the session active state before session putting in j1939_session_deactivate_locked(). Here is the concurrent scenario of the problem reported by syzbot and my reproduction log. cpu0 cpu1 j1939_xtp_rx_eoma j1939_xtp_rx_abort_one j1939_session_get_by_addr [kref == 2] j1939_session_get_by_addr [kref == 3] j1939_session_deactivate [kref == 2] j1939_session_put [kref == 1] j1939_session_completed j1939_session_deactivate WARN_ON_ONCE(kref < 2) ===================================================== WARNING: CPU: 1 PID: 21 at net/can/j1939/transport.c:1088 j1939_session_deactivate+0x5f/0x70 CPU: 1 PID: 21 Comm: ksoftirqd/1 Not tainted 5.14.0-rc7+ #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:j1939_session_deactivate+0x5f/0x70 Call Trace: j1939_session_deactivate_activate_next+0x11/0x28 j1939_xtp_rx_eoma+0x12a/0x180 j1939_tp_recv+0x4a2/0x510 j1939_can_recv+0x226/0x380 can_rcv_filter+0xf8/0x220 can_receive+0x102/0x220 ? process_backlog+0xf0/0x2c0 can_rcv+0x53/0xf0 __netif_receive_skb_one_core+0x67/0x90 ? process_backlog+0x97/0x2c0 __netif_receive_skb+0x22/0x80 Fixes: 0c71437 ("can: j1939: j1939_session_deactivate(): clarify lifetime of session object") Reported-by: [email protected] Signed-off-by: Ziyang Xuan <[email protected]> Acked-by: Oleksij Rempel <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Luke Nowakowski-Krijger <[email protected]> Acked-by: Kamal Mostafa <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
delphix-devops-bot
pushed a commit
that referenced
this pull request
Jun 13, 2024
BugLink: https://bugs.launchpad.net/bugs/2063290 [ Upstream commit 4d5e86a ] ------------[ cut here ]------------ memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2) WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy [last unloaded: mlx_compat(OE)] CPU: 0 PID: 293779 Comm: ssh Tainted: G OE 6.2.0-32-generic #32~22.04.1-Ubuntu Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80 FS: 00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x72/0x90 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? __warn+0x8d/0x160 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? report_bug+0x1bb/0x1d0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x19/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib] ipoib_send+0x2ec/0x770 [ib_ipoib] ipoib_start_xmit+0x5a0/0x770 [ib_ipoib] dev_hard_start_xmit+0x8e/0x1e0 ? validate_xmit_skb_list+0x4d/0x80 sch_direct_xmit+0x116/0x3a0 __dev_xmit_skb+0x1fd/0x580 __dev_queue_xmit+0x284/0x6b0 ? _raw_spin_unlock_irq+0xe/0x50 ? __flush_work.isra.0+0x20d/0x370 ? push_pseudo_header+0x17/0x40 [ib_ipoib] neigh_connected_output+0xcd/0x110 ip_finish_output2+0x179/0x480 ? __smp_call_single_queue+0x61/0xa0 __ip_finish_output+0xc3/0x190 ip_finish_output+0x2e/0xf0 ip_output+0x78/0x110 ? __pfx_ip_finish_output+0x10/0x10 ip_local_out+0x64/0x70 __ip_queue_xmit+0x18a/0x460 ip_queue_xmit+0x15/0x30 __tcp_transmit_skb+0x914/0x9c0 tcp_write_xmit+0x334/0x8d0 tcp_push_one+0x3c/0x60 tcp_sendmsg_locked+0x2e1/0xac0 tcp_sendmsg+0x2d/0x50 inet_sendmsg+0x43/0x90 sock_sendmsg+0x68/0x80 sock_write_iter+0x93/0x100 vfs_write+0x326/0x3c0 ksys_write+0xbd/0xf0 ? do_syscall_64+0x69/0x90 __x64_sys_write+0x19/0x30 do_syscall_64+0x59/0x90 ? do_user_addr_fault+0x1d0/0x640 ? exit_to_user_mode_prepare+0x3b/0xd0 ? irqentry_exit_to_user_mode+0x9/0x20 ? irqentry_exit+0x43/0x50 ? exc_page_fault+0x92/0x1b0 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fc03ad14a37 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffdf8697fe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000008024 RCX: 00007fc03ad14a37 RDX: 0000000000008024 RSI: 0000556f46bd8270 RDI: 0000000000000003 RBP: 0000556f46bb1800 R08: 0000000000007fe3 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002 R13: 0000556f46bc66b0 R14: 000000000000000a R15: 0000556f46bb2f50 </TASK> ---[ end trace 0000000000000000 ]--- Link: https://lore.kernel.org/r/8228ad34bd1a25047586270f7b1fb4ddcd046282.1706433934.git.leon@kernel.org Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
delphix-devops-bot
pushed a commit
that referenced
this pull request
Jul 24, 2024
BugLink: https://bugs.launchpad.net/bugs/2065805 commit ee53437 upstream. Rafael reports that on a system with LX2160A and Marvell DSA switches, if a reboot occurs while the DSA master (dpaa2-eth) is up, the following panic can be seen: systemd-shutdown[1]: Rebooting. Unable to handle kernel paging request at virtual address 00a0000800000041 [00a0000800000041] address between user and kernel address ranges Internal error: Oops: 96000004 [#1] PREEMPT SMP CPU: 6 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00042-g8f5585009b24 #32 pc : dsa_slave_netdevice_event+0x130/0x3e4 lr : raw_notifier_call_chain+0x50/0x6c Call trace: dsa_slave_netdevice_event+0x130/0x3e4 raw_notifier_call_chain+0x50/0x6c call_netdevice_notifiers_info+0x54/0xa0 __dev_close_many+0x50/0x130 dev_close_many+0x84/0x120 unregister_netdevice_many+0x130/0x710 unregister_netdevice_queue+0x8c/0xd0 unregister_netdev+0x20/0x30 dpaa2_eth_remove+0x68/0x190 fsl_mc_driver_remove+0x20/0x5c __device_release_driver+0x21c/0x220 device_release_driver_internal+0xac/0xb0 device_links_unbind_consumers+0xd4/0x100 __device_release_driver+0x94/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_device_remove+0x24/0x40 __fsl_mc_device_remove+0xc/0x20 device_for_each_child+0x58/0xa0 dprc_remove+0x90/0xb0 fsl_mc_driver_remove+0x20/0x5c __device_release_driver+0x21c/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_bus_remove+0x80/0x100 fsl_mc_bus_shutdown+0xc/0x1c platform_shutdown+0x20/0x30 device_shutdown+0x154/0x330 __do_sys_reboot+0x1cc/0x250 __arm64_sys_reboot+0x20/0x30 invoke_syscall.constprop.0+0x4c/0xe0 do_el0_svc+0x4c/0x150 el0_svc+0x24/0xb0 el0t_64_sync_handler+0xa8/0xb0 el0t_64_sync+0x178/0x17c It can be seen from the stack trace that the problem is that the deregistration of the master causes a dev_close(), which gets notified as NETDEV_GOING_DOWN to dsa_slave_netdevice_event(). But dsa_switch_shutdown() has already run, and this has unregistered the DSA slave interfaces, and yet, the NETDEV_GOING_DOWN handler attempts to call dev_close_many() on those slave interfaces, leading to the problem. The previous attempt to avoid the NETDEV_GOING_DOWN on the master after dsa_switch_shutdown() was called seems improper. Unregistering the slave interfaces is unnecessary and unhelpful. Instead, after the slaves have stopped being uppers of the DSA master, we can now reset to NULL the master->dsa_ptr pointer, which will make DSA start ignoring all future notifier events on the master. Fixes: 0650bf5 ("net: dsa: be compatible with masters which unregister on shutdown") Reported-by: Rafael Richter <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]> Cc: [email protected] Cc: Vladimir Oltean <[email protected]> Cc: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
delphix-devops-bot
pushed a commit
that referenced
this pull request
Sep 14, 2024
BugLink: https://bugs.launchpad.net/bugs/2075170 [ Upstream commit 61cf1c7 ] KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw sockets uses the pad field in struct inet_diag_req_v2 for the underlying protocol. This field corresponds to the sdiag_raw_protocol field in struct inet_diag_req_raw. inet_diag_get_exact_compat() converts inet_diag_req to inet_diag_req_v2, but leaves the pad field uninitialized. So the issue occurs when raw_lookup() accesses the sdiag_raw_protocol field. Fix this by initializing the pad field in inet_diag_get_exact_compat(). Also, do the same fix in inet_diag_dump_compat() to avoid the similar issue in the future. [1] BUG: KMSAN: uninit-value in raw_lookup net/ipv4/raw_diag.c:49 [inline] BUG: KMSAN: uninit-value in raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_lookup net/ipv4/raw_diag.c:49 [inline] raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: raw_sock_get+0x650/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable req.i created at: inet_diag_get_exact_compat net/ipv4/inet_diag.c:1396 [inline] inet_diag_rcv_msg_compat+0x2a6/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 CPU: 1 PID: 8888 Comm: syz-executor.6 Not tainted 6.10.0-rc4-00217-g35bb670d65fc #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 Fixes: 432490f ("net: ip, diag -- Add diag interface for raw sockets") Reported-by: syzkaller <[email protected]> Signed-off-by: Shigeru Yoshida <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
delphix-devops-bot
pushed a commit
that referenced
this pull request
Feb 7, 2025
BugLink: https://bugs.launchpad.net/bugs/2077600 [ Upstream commit 61cf1c7 ] KMSAN reported uninit-value access in raw_lookup() [1]. Diag for raw sockets uses the pad field in struct inet_diag_req_v2 for the underlying protocol. This field corresponds to the sdiag_raw_protocol field in struct inet_diag_req_raw. inet_diag_get_exact_compat() converts inet_diag_req to inet_diag_req_v2, but leaves the pad field uninitialized. So the issue occurs when raw_lookup() accesses the sdiag_raw_protocol field. Fix this by initializing the pad field in inet_diag_get_exact_compat(). Also, do the same fix in inet_diag_dump_compat() to avoid the similar issue in the future. [1] BUG: KMSAN: uninit-value in raw_lookup net/ipv4/raw_diag.c:49 [inline] BUG: KMSAN: uninit-value in raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_lookup net/ipv4/raw_diag.c:49 [inline] raw_sock_get+0x657/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was stored to memory at: raw_sock_get+0x650/0x800 net/ipv4/raw_diag.c:71 raw_diag_dump_one+0xa1/0x660 net/ipv4/raw_diag.c:99 inet_diag_cmd_exact+0x7d9/0x980 inet_diag_get_exact_compat net/ipv4/inet_diag.c:1404 [inline] inet_diag_rcv_msg_compat+0x469/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 netlink_rcv_skb+0x537/0x670 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x35/0x40 net/core/sock_diag.c:297 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xe74/0x1240 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10c6/0x1260 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x332/0x3d0 net/socket.c:745 ____sys_sendmsg+0x7f0/0xb70 net/socket.c:2585 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2639 __sys_sendmsg net/socket.c:2668 [inline] __do_sys_sendmsg net/socket.c:2677 [inline] __se_sys_sendmsg net/socket.c:2675 [inline] __x64_sys_sendmsg+0x27e/0x4a0 net/socket.c:2675 x64_sys_call+0x135e/0x3ce0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable req.i created at: inet_diag_get_exact_compat net/ipv4/inet_diag.c:1396 [inline] inet_diag_rcv_msg_compat+0x2a6/0x530 net/ipv4/inet_diag.c:1426 sock_diag_rcv_msg+0x23d/0x740 net/core/sock_diag.c:282 CPU: 1 PID: 8888 Comm: syz-executor.6 Not tainted 6.10.0-rc4-00217-g35bb670d65fc #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 Fixes: 432490f ("net: ip, diag -- Add diag interface for raw sockets") Reported-by: syzkaller <[email protected]> Signed-off-by: Shigeru Yoshida <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Portia Stephens <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>
delphix-devops-bot
pushed a commit
that referenced
this pull request
Mar 26, 2025
commit 3802f73 upstream. blk_mq_clear_flush_rq_mapping() is not called during scsi probe, by checking blk_queue_init_done(). However, QUEUE_FLAG_INIT_DONE is cleared in del_gendisk by commit aec89dc ("block: keep q_usage_counter in atomic mode after del_gendisk"), hence for disk like scsi, following blk_mq_destroy_queue() will not clear flush rq from tags->rqs[] as well, cause following uaf that is found by our syzkaller for v6.6: ================================================================== BUG: KASAN: slab-use-after-free in blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 Read of size 4 at addr ffff88811c969c20 by task kworker/1:2H/224909 CPU: 1 PID: 224909 Comm: kworker/1:2H Not tainted 6.6.0-ga836a5060850 #32 Workqueue: kblockd blk_mq_timeout_work Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description.constprop.0+0x66/0x300 mm/kasan/report.c:364 print_report+0x3e/0x70 mm/kasan/report.c:475 kasan_report+0xb8/0xf0 mm/kasan/report.c:588 blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 bt_iter block/blk-mq-tag.c:288 [inline] __sbitmap_for_each_set include/linux/sbitmap.h:295 [inline] sbitmap_for_each_set include/linux/sbitmap.h:316 [inline] bt_for_each+0x455/0x790 block/blk-mq-tag.c:325 blk_mq_queue_tag_busy_iter+0x320/0x740 block/blk-mq-tag.c:534 blk_mq_timeout_work+0x1a3/0x7b0 block/blk-mq.c:1673 process_one_work+0x7c4/0x1450 kernel/workqueue.c:2631 process_scheduled_works kernel/workqueue.c:2704 [inline] worker_thread+0x804/0xe40 kernel/workqueue.c:2785 kthread+0x346/0x450 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:293 Allocated by task 942: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:374 [inline] __kasan_kmalloc mm/kasan/common.c:383 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:380 kasan_kmalloc include/linux/kasan.h:198 [inline] __do_kmalloc_node mm/slab_common.c:1007 [inline] __kmalloc_node+0x69/0x170 mm/slab_common.c:1014 kmalloc_node include/linux/slab.h:620 [inline] kzalloc_node include/linux/slab.h:732 [inline] blk_alloc_flush_queue+0x144/0x2f0 block/blk-flush.c:499 blk_mq_alloc_hctx+0x601/0x940 block/blk-mq.c:3788 blk_mq_alloc_and_init_hctx+0x27f/0x330 block/blk-mq.c:4261 blk_mq_realloc_hw_ctxs+0x488/0x5e0 block/blk-mq.c:4294 blk_mq_init_allocated_queue+0x188/0x860 block/blk-mq.c:4350 blk_mq_init_queue_data block/blk-mq.c:4166 [inline] blk_mq_init_queue+0x8d/0x100 block/blk-mq.c:4176 scsi_alloc_sdev+0x843/0xd50 drivers/scsi/scsi_scan.c:335 scsi_probe_and_add_lun+0x77c/0xde0 drivers/scsi/scsi_scan.c:1189 __scsi_scan_target+0x1fc/0x5a0 drivers/scsi/scsi_scan.c:1727 scsi_scan_channel drivers/scsi/scsi_scan.c:1815 [inline] scsi_scan_channel+0x14b/0x1e0 drivers/scsi/scsi_scan.c:1791 scsi_scan_host_selected+0x2fe/0x400 drivers/scsi/scsi_scan.c:1844 scsi_scan+0x3a0/0x3f0 drivers/scsi/scsi_sysfs.c:151 store_scan+0x2a/0x60 drivers/scsi/scsi_sysfs.c:191 dev_attr_store+0x5c/0x90 drivers/base/core.c:2388 sysfs_kf_write+0x11c/0x170 fs/sysfs/file.c:136 kernfs_fop_write_iter+0x3fc/0x610 fs/kernfs/file.c:338 call_write_iter include/linux/fs.h:2083 [inline] new_sync_write+0x1b4/0x2d0 fs/read_write.c:493 vfs_write+0x76c/0xb00 fs/read_write.c:586 ksys_write+0x127/0x250 fs/read_write.c:639 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x70/0x120 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x78/0xe2 Freed by task 244687: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] __kasan_slab_free+0x12a/0x1b0 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1815 [inline] slab_free_freelist_hook mm/slub.c:1841 [inline] slab_free mm/slub.c:3807 [inline] __kmem_cache_free+0xe4/0x520 mm/slub.c:3820 blk_free_flush_queue+0x40/0x60 block/blk-flush.c:520 blk_mq_hw_sysfs_release+0x4a/0x170 block/blk-mq-sysfs.c:37 kobject_cleanup+0x136/0x410 lib/kobject.c:689 kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x119/0x140 lib/kobject.c:737 blk_mq_release+0x24f/0x3f0 block/blk-mq.c:4144 blk_free_queue block/blk-core.c:298 [inline] blk_put_queue+0xe2/0x180 block/blk-core.c:314 blkg_free_workfn+0x376/0x6e0 block/blk-cgroup.c:144 process_one_work+0x7c4/0x1450 kernel/workqueue.c:2631 process_scheduled_works kernel/workqueue.c:2704 [inline] worker_thread+0x804/0xe40 kernel/workqueue.c:2785 kthread+0x346/0x450 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:293 Other than blk_mq_clear_flush_rq_mapping(), the flag is only used in blk_register_queue() from initialization path, hence it's safe not to clear the flag in del_gendisk. And since QUEUE_FLAG_REGISTERED already make sure that queue should only be registered once, there is no need to test the flag as well. Fixes: 6cfeadb ("blk-mq: don't clear flush_rq from tags->rqs[]") Depends-on: commit aec89dc ("block: keep q_usage_counter in atomic mode after del_gendisk") Signed-off-by: Yu Kuai <[email protected]> Reviewed-by: Ming Lei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: BRUNO VERNAY <[email protected]> Signed-off-by: Hugo SIMELIERE <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> CVE-2024-53170 (cherry picked from commit 1364a29b71c7837770f1902c49e7a6e234d72c92 linux-6.6.y) Signed-off-by: Massimiliano Pellizzer <[email protected]> Acked-by: Agathe Porte <[email protected]> Acked-by: Koichiro Den <[email protected]> Signed-off-by: Koichiro Den <[email protected]>
delphix-devops-bot
pushed a commit
that referenced
this pull request
Oct 23, 2025
BugLink: https://bugs.launchpad.net/bugs/2120812 [ Upstream commit eedf3e3c2f2af55dca42b0ea81dffb808211d269 ] ACPICA commit 1c28da2242783579d59767617121035dafba18c3 This was originally done in NetBSD: NetBSD/src@b69d1ac and is the correct alternative to the smattering of `memcpy`s I previously contributed to this repository. This also sidesteps the newly strict checks added in UBSAN: llvm/llvm-project@7926744 Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #1.2 0x000021982bc4af3c in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x41f3c #1.1 0x000021982bc4af3c in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x41f3c #1 0x000021982bc4af3c in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:395 <libclang_rt.asan.so>+0x41f3c #2 0x000021982bc4bb6f in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x42b6f #3 0x000021982bc4b723 in __ubsan_handle_type_mismatch_v1 compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x42723 #4 0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e #5 0x000021afcfdf2089 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:355 <platform-bus-x86.so>+0x6b2089 #6 0x000021afcfded169 in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:137 <platform-bus-x86.so>+0x6ad169 #7 0x000021afcfe2d24a in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:237 <platform-bus-x86.so>+0x6ed24a #8 0x000021afcfde66b7 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x6a66b7 #9 0x000021afcfdf6979 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x6b6979 #10 0x000021afcfdf708f in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x6b708f #11 0x000021afcfa95dcf in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0x355dcf #12 0x000021afcfaa8278 in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:84 <platform-bus-x86.so>+0x368278 #13 0x000021afcfbddb87 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x49db87 #14 0x000021afcf99091d in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:95 <platform-bus-x86.so>+0x25091d #15 0x000021afcf9c1d4e in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:60 <platform-bus-x86.so>+0x281d4e #16 0x000021afcf9e33ad in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:77 <platform-bus-x86.so>+0x2a33ad #17 0x000021afcf9e313e in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:76:19), false, false, std::__2::allocator<std::byte>, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:183 <platform-bus-x86.so>+0x2a313e #18 0x000021afcfbab4c7 in fit::internal::function_base<16UL, false, void(), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <platform-bus-x86.so>+0x46b4c7 #19 0x000021afcfbab342 in fit::function_impl<16UL, false, void(), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/function.h:315 <platform-bus-x86.so>+0x46b342 #20 0x000021afcfcd98c3 in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../sdk/lib/async/task.cc:24 <platform-bus-x86.so>+0x5998c3 #21 0x00002290f9924616 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:789 <libdriver_runtime.so>+0x10a616 #22 0x00002290f9924323 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:788:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x10a323 #23 0x00002290f9904b76 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xeab76 #24 0x00002290f9904831 in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:471 <libdriver_runtime.so>+0xea831 #25 0x00002290f98d5adc in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:74 <libdriver_runtime.so>+0xbbadc #26 0x00002290f98e1e58 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1248 <libdriver_runtime.so>+0xc7e58 #27 0x00002290f98e4159 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1308 <libdriver_runtime.so>+0xca159 #28 0x00002290f9918414 in λ(const driver_runtime::Dispatcher::create_with_adder::(anon class)*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:353 <libdriver_runtime.so>+0xfe414 #29 0x00002290f991812d in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:351:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xfe12d #30 0x00002290f9906fc7 in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xecfc7 #31 0x00002290f9906c66 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:315 <libdriver_runtime.so>+0xecc66 #32 0x00002290f98e73d9 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:543 <libdriver_runtime.so>+0xcd3d9 #33 0x00002290f98e700d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1442 <libdriver_runtime.so>+0xcd00d #34 0x00002290f9918983 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0xfe983 #35 0x00002290f9918b9e in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0xfeb9e #36 0x00002290f99bf509 in async_loop_dispatch_wait(async_loop_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async-loop/loop.c:394 <libdriver_runtime.so>+0x1a5509 #37 0x00002290f99b9958 in async_loop_run_once(async_loop_t*, zx_time_t) ../../sdk/lib/async-loop/loop.c:343 <libdriver_runtime.so>+0x19f958 #38 0x00002290f99b9247 in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../sdk/lib/async-loop/loop.c:301 <libdriver_runtime.so>+0x19f247 #39 0x00002290f99ba962 in async_loop_run_thread(void*) ../../sdk/lib/async-loop/loop.c:860 <libdriver_runtime.so>+0x1a0962 #40 0x000041afd176ef30 in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:63 <libc.so>+0x84f30 #41 0x000041afd18a448d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x1ba48d Link: acpica/acpica@1c28da22 Signed-off-by: Rafael J. Wysocki <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Tamir Duberstein <[email protected]> [ rjw: Pick up the tag from Tamir ] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Noah Wager <[email protected]> Signed-off-by: Stefan Bader <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
32 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.