update to 6.6.13 (#60) * i2c: designware: Disable TX_EMPTY irq while waiting for block length byte commit e8183fa10c25c7b3c20670bf2b430ddcc1ee03c0 upstream. During SMBus block data read process, we have seen high interrupt rate because of TX_EMPTY irq status while waiting for block length byte (the first data byte after the address phase). The interrupt handler does not do anything because the internal state is kept as STATUS_WRITE_IN_PROGRESS. Hence, we should disable TX_EMPTY IRQ until I2C DesignWare receives first data byte from I2C device, then re-enable it to resume SMBus transaction. It takes 0.789 ms for host to receive data length from slave. Without the patch, i2c_dw_isr() is called 99 times by TX_EMPTY interrupt. And it is none after applying the patch. Cc: stable@vger.kernel.org Co-developed-by: Chuong Tran Signed-off-by: Chuong Tran Signed-off-by: Tam Nguyen Acked-by: Jarkko Nikula Reviewed-by: Serge Semin Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman * s390/ap: fix AP bus crash on early config change callback invocation commit e14aec23025eeb1f2159ba34dbc1458467c4c347 upstream. Fix kernel crash in AP bus code caused by very early invocation of the config change callback function via SCLP. After a fresh IML of the machine the crypto cards are still offline and will get switched online only with activation of any LPAR which has the card in it's configuration. A crypto card coming online is reported to the LPAR via SCLP and the AP bus offers a callback function to get this kind of information. However, it may happen that the callback is invoked before the AP bus init function is complete. As the callback triggers a synchronous AP bus scan, the scan may already run but some internal states are not initialized by the AP bus init function resulting in a crash like this: [ 11.635859] Unable to handle kernel pointer dereference in virtual kernel address space [ 11.635861] Failing address: 0000000000000000 TEID: 0000000000000887 [ 11.635862] Fault in home space mode while using kernel ASCE. [ 11.635864] AS:00000000894c4007 R3:00000001fece8007 S:00000001fece7800 P:000000000000013d [ 11.635879] Oops: 0004 ilc:1 [#1] SMP [ 11.635882] Modules linked in: [ 11.635884] CPU: 5 PID: 42 Comm: kworker/5:0 Not tainted 6.6.0-rc3-00003-g4dbf7cdc6b42 #12 [ 11.635886] Hardware name: IBM 3931 A01 751 (LPAR) [ 11.635887] Workqueue: events_long ap_scan_bus [ 11.635891] Krnl PSW : 0704c00180000000 0000000000000000 (0x0) [ 11.635895] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 [ 11.635897] Krnl GPRS: 0000000001000a00 0000000000000000 0000000000000006 0000000089591940 [ 11.635899] 0000000080000000 0000000000000a00 0000000000000000 0000000000000000 [ 11.635901] 0000000081870c00 0000000089591000 000000008834e4e2 0000000002625a00 [ 11.635903] 0000000081734200 0000038000913c18 000000008834c6d6 0000038000913ac8 [ 11.635906] Krnl Code:>0000000000000000: 0000 illegal [ 11.635906] 0000000000000002: 0000 illegal [ 11.635906] 0000000000000004: 0000 illegal [ 11.635906] 0000000000000006: 0000 illegal [ 11.635906] 0000000000000008: 0000 illegal [ 11.635906] 000000000000000a: 0000 illegal [ 11.635906] 000000000000000c: 0000 illegal [ 11.635906] 000000000000000e: 0000 illegal [ 11.635915] Call Trace: [ 11.635916] [<0000000000000000>] 0x0 [ 11.635918] [<000000008834e4e2>] ap_queue_init_state+0x82/0xb8 [ 11.635921] [<000000008834ba1c>] ap_scan_domains+0x6fc/0x740 [ 11.635923] [<000000008834c092>] ap_scan_adapter+0x632/0x8b0 [ 11.635925] [<000000008834c3e4>] ap_scan_bus+0xd4/0x288 [ 11.635927] [<00000000879a33ba>] process_one_work+0x19a/0x410 [ 11.635930] Discipline DIAG cannot be used without z/VM [ 11.635930] [<00000000879a3a2c>] worker_thread+0x3fc/0x560 [ 11.635933] [<00000000879aea60>] kthread+0x120/0x128 [ 11.635936] [<000000008792afa4>] __ret_from_fork+0x3c/0x58 [ 11.635938] [<00000000885ebe62>] ret_from_fork+0xa/0x30 [ 11.635942] Last Breaking-Event-Address: [ 11.635942] [<000000008834c6d4>] ap_wait+0xcc/0x148 This patch improves the ap_bus_force_rescan() function which is invoked by the config change callback by checking if a first initial AP bus scan has been done. If not, the force rescan request is simple ignored. Anyhow it does not make sense to trigger AP bus re-scans even before the very first bus scan is complete. Cc: stable@vger.kernel.org Reviewed-by: Holger Dengler Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik Signed-off-by: Greg Kroah-Hartman * net: ethtool: Fix documentation of ethtool_sprintf() commit f55d8e60f10909dbc5524e261041e1d28d7d20d8 upstream. This function takes a pointer to a pointer, unlike sprintf() which is passed a plain pointer. Fix up the documentation to make this clear. Fixes: 7888fe53b706 ("ethtool: Add common function for filling out strings") Cc: Alexander Duyck Cc: Justin Stitt Cc: stable@vger.kernel.org Signed-off-by: Andrew Lunn Reviewed-by: Justin Stitt Link: https://lore.kernel.org/r/20231028192511.100001-1-andrew@lunn.ch Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman * net: dsa: lan9303: consequently nested-lock physical MDIO commit 5a22fbcc10f3f7d94c5d88afbbffa240a3677057 upstream. When LAN9303 is MDIO-connected two callchains exist into mdio->bus->write(): 1. switch ports 1&2 ("physical" PHYs): virtual (switch-internal) MDIO bus (lan9303_switch_ops->phy_{read|write})-> lan9303_mdio_phy_{read|write} -> mdiobus_{read|write}_nested 2. LAN9303 virtual PHY: virtual MDIO bus (lan9303_phy_{read|write}) -> lan9303_virt_phy_reg_{read|write} -> regmap -> lan9303_mdio_{read|write} If the latter functions just take mutex_lock(&sw_dev->device->bus->mdio_lock) it triggers a LOCKDEP false-positive splat. It's false-positive because the first mdio_lock in the second callchain above belongs to virtual MDIO bus, the second mdio_lock belongs to physical MDIO bus. Consequent annotation in lan9303_mdio_{read|write} as nested lock (similar to lan9303_mdio_phy_{read|write}, it's the same physical MDIO bus) prevents the following splat: WARNING: possible circular locking dependency detected 5.15.71 #1 Not tainted ------------------------------------------------------ kworker/u4:3/609 is trying to acquire lock: ffff000011531c68 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}, at: regmap_lock_mutex but task is already holding lock: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&bus->mdio_lock){+.+.}-{3:3}: lock_acquire __mutex_lock mutex_lock_nested lan9303_mdio_read _regmap_read regmap_read lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork -> #0 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}: __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); *** DEADLOCK *** 5 locks held by kworker/u4:3/609: #0: ffff000002842938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work #1: ffff80000bacbd60 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work #2: ffff000007645178 (&dev->mutex){....}-{3:3}, at: __device_attach #3: ffff8000096e6e78 (dsa2_mutex){+.+.}-{3:3}, at: dsa_register_switch #4: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read stack backtrace: CPU: 1 PID: 609 Comm: kworker/u4:3 Not tainted 5.15.71 #1 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace show_stack dump_stack_lvl dump_stack print_circular_bug check_noncircular __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe ... Cc: stable@vger.kernel.org Fixes: dc7005831523 ("net: dsa: LAN9303: add MDIO managed mode support") Signed-off-by: Alexander Sverdlin Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20231027065741.534971-1-alexander.sverdlin@siemens.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman * net: phylink: initialize carrier state at creation commit 02d5fdbf4f2b8c406f7a4c98fa52aa181a11d733 upstream. Background: Turris Omnia (Armada 385); eth2 (mvneta) connected to SFP bus; SFP module is present, but no fiber connected, so definitely no carrier. After booting, eth2 is down, but netdev LED trigger surprisingly reports link active. Then, after "ip link set eth2 up", the link indicator goes away - as I would have expected it from the beginning. It turns out, that the default carrier state after netdev creation is "carrier ok". Some ethernet drivers explicitly call netif_carrier_off during probing, others (like mvneta) don't - which explains the current behaviour: only when the device is brought up, phylink_start calls netif_carrier_off. Fix this for all drivers using phylink, by calling netif_carrier_off in phylink_create. Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs") Cc: stable@vger.kernel.org Suggested-by: Andrew Lunn Signed-off-by: Klaus Kudielka Reviewed-by: Russell King (Oracle) Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman * gfs2: don't withdraw if init_threads() got interrupted commit 0cdc6f44e9fdc2d20d720145bf99a39f611f6d61 upstream. In gfs2_fill_super(), when mounting a gfs2 filesystem is interrupted, kthread_create() can return -EINTR. When that happens, we roll back what has already been done and abort the mount. Since commit 62dd0f98a0e5 ("gfs2: Flag a withdraw if init_threads() fails), we are calling gfs2_withdraw_delayed() in gfs2_fill_super(); first via gfs2_make_fs_rw(), then directly. But gfs2_withdraw_delayed() only marks the filesystem as withdrawing and relies on a caller further up the stack to do the actual withdraw, which doesn't exist in the gfs2_fill_super() case. Because the filesystem is marked as withdrawing / withdrawn, function gfs2_lm_unmount() doesn't release the dlm lockspace, so when we try to mount that filesystem again, we get: gfs2: fsid=gohan:gohan0: Trying to join cluster "lock_dlm", "gohan:gohan0" gfs2: fsid=gohan:gohan0: dlm_new_lockspace error -17 Since commit b77b4a4815a9 ("gfs2: Rework freeze / thaw logic"), the deadlock this gfs2_withdraw_delayed() call was supposed to work around cannot occur anymore because freeze_go_callback() won't take the sb->s_umount semaphore unconditionally anymore, so we can get rid of the gfs2_withdraw_delayed() in gfs2_fill_super() entirely. Reported-by: Alexander Aring Signed-off-by: Andreas Gruenbacher Cc: stable@vger.kernel.org # v6.5+ Signed-off-by: Greg Kroah-Hartman * i2c: i801: fix potential race in i801_block_transaction_byte_by_byte commit f78ca48a8ba9cdec96e8839351e49eec3233b177 upstream. Currently we set SMBHSTCNT_LAST_BYTE only after the host has started receiving the last byte. If we get e.g. preempted before setting SMBHSTCNT_LAST_BYTE, the host may be finished with receiving the byte before SMBHSTCNT_LAST_BYTE is set. Therefore change the code to set SMBHSTCNT_LAST_BYTE before writing SMBHSTSTS_BYTE_DONE for the byte before the last byte. Now the code is also consistent with what we do in i801_isr_byte_done(). Reported-by: Jean Delvare Closes: https://lore.kernel.org/linux-i2c/20230828152747.09444625@endymion.delvare/ Cc: stable@vger.kernel.org Acked-by: Andi Shyti Signed-off-by: Heiner Kallweit Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman * f2fs: do not return EFSCORRUPTED, but try to run online repair commit 50a472bbc79ff9d5a88be8019a60e936cadf9f13 upstream. If we return the error, there's no way to recover the status as of now, since fsck does not fix the xattr boundary issue. Cc: stable@vger.kernel.org Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman * f2fs: set the default compress_level on ioctl commit f5f3bd903a5d3e3b2ba89f11e0e29db25e60c048 upstream. Otherwise, we'll get a broken inode. # touch $FILE # f2fs_io setflags compression $FILE # f2fs_io set_coption 2 8 $FILE [ 112.227612] F2FS-fs (dm-51): sanity_check_compress_inode: inode (ino=8d3fe) has unsupported compress level: 0, run fsck to fix Cc: stable@vger.kernel.org Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman * f2fs: avoid format-overflow warning commit e0d4e8acb3789c5a8651061fbab62ca24a45c063 upstream. With gcc and W=1 option, there's a warning like this: fs/f2fs/compress.c: In function ‘f2fs_init_page_array_cache’: fs/f2fs/compress.c:1984:47: error: ‘%u’ directive writing between 1 and 7 bytes into a region of size between 5 and 8 [-Werror=format-overflow=] 1984 | sprintf(slab_name, "f2fs_page_array_entry-%u:%u", MAJOR(dev), MINOR(dev)); | ^~ String "f2fs_page_array_entry-%u:%u" can up to 35. The first "%u" can up to 4 and the second "%u" can up to 7, so total size is "24 + 4 + 7 = 35". slab_name's size should be 35 rather than 32. Cc: stable@vger.kernel.org Signed-off-by: Su Hui Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman * f2fs: split initial and dynamic conditions for extent_cache commit f803982190f0265fd36cf84670aa6daefc2b0768 upstream. Let's allocate the extent_cache tree without dynamic conditions to avoid a missing condition causing a panic as below. # create a file w/ a compressed flag # disable the compression # panic while updating extent_cache F2FS-fs (dm-64): Swapfile: last extent is not aligned to section F2FS-fs (dm-64): Swapfile (3) is not align to section: 1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(2097152 * N) Adding 124996k swap on ./swap-file. Priority:0 extents:2 across:17179494468k ================================================================== BUG: KASAN: null-ptr-deref in instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline] BUG: KASAN: null-ptr-deref in atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline] BUG: KASAN: null-ptr-deref in queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline] BUG: KASAN: null-ptr-deref in __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline] BUG: KASAN: null-ptr-deref in _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295 Write of size 4 at addr 0000000000000030 by task syz-executor154/3327 CPU: 0 PID: 3327 Comm: syz-executor154 Tainted: G O 5.10.185 #1 Hardware name: emulation qemu-x86/qemu-x86, BIOS 2023.01-21885-gb3cc1cd24d 01/01/2023 Call Trace: __dump_stack out/common/lib/dump_stack.c:77 [inline] dump_stack_lvl+0x17e/0x1c4 out/common/lib/dump_stack.c:118 __kasan_report+0x16c/0x260 out/common/mm/kasan/report.c:415 kasan_report+0x51/0x70 out/common/mm/kasan/report.c:428 kasan_check_range+0x2f3/0x340 out/common/mm/kasan/generic.c:186 __kasan_check_write+0x14/0x20 out/common/mm/kasan/shadow.c:37 instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline] atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline] queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline] __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline] _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295 __drop_extent_tree+0xdf/0x2f0 out/common/fs/f2fs/extent_cache.c:1155 f2fs_drop_extent_tree+0x17/0x30 out/common/fs/f2fs/extent_cache.c:1172 f2fs_insert_range out/common/fs/f2fs/file.c:1600 [inline] f2fs_fallocate+0x19fd/0x1f40 out/common/fs/f2fs/file.c:1764 vfs_fallocate+0x514/0x9b0 out/common/fs/open.c:310 ksys_fallocate out/common/fs/open.c:333 [inline] __do_sys_fallocate out/common/fs/open.c:341 [inline] __se_sys_fallocate out/common/fs/open.c:339 [inline] __x64_sys_fallocate+0xb8/0x100 out/common/fs/open.c:339 do_syscall_64+0x35/0x50 out/common/arch/x86/entry/common.c:46 Cc: stable@vger.kernel.org Fixes: 72840cccc0a1 ("f2fs: allocate the extent_cache by default") Reported-and-tested-by: syzbot+d342e330a37b48c094b7@syzkaller.appspotmail.com Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman * media: lirc: drop trailing space from scancode transmit commit c8a489f820179fb12251e262b50303c29de991ac upstream. When transmitting, infrared drivers expect an odd number of samples; iow without a trailing space. No problems have been observed so far, so this is just belt and braces. Fixes: 9b6192589be7 ("media: lirc: implement scancode sending") Cc: stable@vger.kernel.org Signed-off-by: Sean Young Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman * media: sharp: fix sharp encoding commit 4f7efc71891462ab7606da7039f480d7c1584a13 upstream. The Sharp protocol[1] encoding has incorrect timings for bit space. [1] https://www.sbprojects.net/knowledge/ir/sharp.php Fixes: d35afc5fe097 ("[media] rc: ir-sharp-decoder: Add encode capability") Cc: stable@vger.kernel.org Reported-by: Joe Ferner Closes: https://sourceforge.net/p/lirc/mailman/message/38604507/ Signed-off-by: Sean Young Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman * media: venus: hfi_parser: Add check to keep the number of codecs within range commit 0768a9dd809ef52440b5df7dce5a1c1c7e97abbd upstream. Supported codec bitmask is populated from the payload from venus firmware. There is a possible case when all the bits in the codec bitmask is set. In such case, core cap for decoder is filled and MAX_CODEC_NUM is utilized. Now while filling the caps for encoder, it can lead to access the caps array beyong 32 index. Hence leading to OOB write. The fix counts the supported encoder and decoder. If the count is more than max, then it skips accessing the caps. Cc: stable@vger.kernel.org Fixes: 1a73374a04e5 ("media: venus: hfi_parser: add common capability parser") Signed-off-by: Vikash Garodia Signed-off-by: Stanimir Varbanov Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman * media: venus: hfi: fix the check to handle session buffer requirement commit b18e36dfd6c935da60a971310374f3dfec3c82e1 upstream. Buffer requirement, for different buffer type, comes from video firmware. While copying these requirements, there is an OOB possibility when the payload from firmware is more than expected size. Fix the check to avoid the OOB possibility. Cc: stable@vger.kernel.org Fixes: 09c2845e8fe4 ("[media] media: venus: hfi: add Host Firmware Interface (HFI)") Reviewed-by: Nathan Hebert Signed-off-by: Vikash Garodia Signed-off-by: Stanimir Varbanov Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman * media: venus: hfi: add checks to handle capabilities from firmware commit 8d0b89398b7ebc52103e055bf36b60b045f5258f upstream. The hfi parser, parses the capabilities received from venus firmware and copies them to core capabilities. Consider below api, for example, fill_caps - In this api, caps in core structure gets updated with the number of capabilities received in firmware data payload. If the same api is called multiple times, there is a possibility of copying beyond the max allocated size in core caps. Similar possibilities in fill_raw_fmts and fill_profile_level functions. Cc: stable@vger.kernel.org Fixes: 1a73374a04e5 ("media: venus: hfi_parser: add common capability parser") Signed-off-by: Vikash Garodia Signed-off-by: Stanimir Varbanov Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman * media: ccs: Correctly initialise try compose rectangle commit 724ff68e968b19d786870d333f9952bdd6b119cb upstream. Initialise the try sink compose rectangle size to the sink compose rectangle for binner and scaler sub-devices. This was missed due to the faulty condition that lead to the compose rectangles to be initialised for the pixel array sub-device where it is not relevant. Fixes: ccfc97bdb5ae ("[media] smiapp: Add driver") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus Reviewed-by: Laurent Pinchart Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman * drm/mediatek/dp: fix memory leak on ->get_edid callback audio detection commit dab12fa8d2bd3868cf2de485ed15a3feef28a13d upstream. The sads returned by drm_edid_to_sad() needs to be freed. Fixes: e71a8ebbe086 ("drm/mediatek: dp: Audio support for MT8195") Cc: Guillaume Ranquet Cc: Bo-Chen Chen Cc: AngeloGioacchino Del Regno Cc: Dmitry Osipenko Cc: Chun-Kuang Hu Cc: Philipp Zabel Cc: Matthias Brugger Cc: dri-devel@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: # v6.1+ Signed-off-by: Jani Nikula Reviewed-by: Chen-Yu Tsai Link: https://patchwork.kernel.org/project/dri-devel/patch/20230914155317.2511876-1-jani.nikula@intel.com/ Signed-off-by: Chun-Kuang Hu Signed-off-by: Greg Kroah-Hartman * drm/mediatek/dp: fix memory leak on ->get_edid callback error path commit fcaf9761fd5884a64eaac48536f8c27ecfd2e6bc upstream. Setting new_edid to NULL leaks the buffer. Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver") Cc: Markus Schneider-Pargmann Cc: Guillaume Ranquet Cc: Bo-Chen Chen Cc: CK Hu Cc: AngeloGioacchino Del Regno Cc: Dmitry Osipenko Cc: Chun-Kuang Hu Cc: Philipp Zabel Cc: Matthias Brugger Cc: dri-devel@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: # v6.1+ Signed-off-by: Jani Nikula Reviewed-by: Guillaume Ranquet Link: https://patchwork.kernel.org/project/dri-devel/patch/20230914131058.2472260-1-jani.nikula@intel.com/ Signed-off-by: Chun-Kuang Hu Signed-off-by: Greg Kroah-Hartman * dm-bufio: fix no-sleep mode commit 2a695062a5a42aead8c539a344168d4806b3fda2 upstream. dm-bufio has a no-sleep mode. When activated (with the DM_BUFIO_CLIENT_NO_SLEEP flag), the bufio client is read-only and we could call dm_bufio_get from tasklets. This is used by dm-verity. Unfortunately, commit 450e8dee51aa ("dm bufio: improve concurrent IO performance") broke this and the kernel would warn that cache_get() was calling down_read() from no-sleeping context. The bug can be reproduced by using "veritysetup open" with the "--use-tasklets" flag. This commit fixes dm-bufio, so that the tasklet mode works again, by expanding use of the 'no_sleep_enabled' static_key to conditionally use either a rw_semaphore or rwlock_t (which are colocated in the buffer_tree structure using a union). Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org # v6.4 Fixes: 450e8dee51aa ("dm bufio: improve concurrent IO performance") Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman * dm-verity: don't use blocking calls from tasklets commit 28f07f2ab4b3a2714f1fefcc58ada4bcc195f806 upstream. The commit 5721d4e5a9cd enhanced dm-verity, so that it can verify blocks from tasklets rather than from workqueues. This reportedly improves performance significantly. However, dm-verity was using the flag CRYPTO_TFM_REQ_MAY_SLEEP from tasklets which resulted in warnings about sleeping function being called from non-sleeping context. BUG: sleeping function called from invalid context at crypto/internal.h:206 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 14, name: ksoftirqd/0 preempt_count: 100, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 PID: 14 Comm: ksoftirqd/0 Tainted: G W 6.7.0-rc1 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: dump_stack_lvl+0x32/0x50 __might_resched+0x110/0x160 crypto_hash_walk_done+0x54/0xb0 shash_ahash_update+0x51/0x60 verity_hash_update.isra.0+0x4a/0x130 [dm_verity] verity_verify_io+0x165/0x550 [dm_verity] ? free_unref_page+0xdf/0x170 ? psi_group_change+0x113/0x390 verity_tasklet+0xd/0x70 [dm_verity] tasklet_action_common.isra.0+0xb3/0xc0 __do_softirq+0xaf/0x1ec ? smpboot_thread_fn+0x1d/0x200 ? sort_range+0x20/0x20 run_ksoftirqd+0x15/0x30 smpboot_thread_fn+0xed/0x200 kthread+0xdc/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x28/0x40 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 This commit fixes dm-verity so that it doesn't use the flags CRYPTO_TFM_REQ_MAY_SLEEP and CRYPTO_TFM_REQ_MAY_BACKLOG from tasklets. The crypto API would do GFP_ATOMIC allocation instead, it could return -ENOMEM and we catch -ENOMEM in verity_tasklet and requeue the request to the workqueue. Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org # v6.0+ Fixes: 5721d4e5a9cd ("dm verity: Add optional "try_verify_in_tasklet" feature") Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman * nfsd: fix file memleak on client_opens_release commit bc1b5acb40201a0746d68a7d7cfc141899937f4f upstream. seq_release should be called to free the allocated seq_file Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: Mahmoud Adam Reviewed-by: Jeff Layton Fixes: 78599c42ae3c ("nfsd4: add file to display list of client's opens") Reviewed-by: NeilBrown Tested-by: Jeff Layton Signed-off-by: Chuck Lever Signed-off-by: Greg Kroah-Hartman * NFSD: Update nfsd_cache_append() to use xdr_stream commit 49cecd8628a9855cd993792a0377559ea32d5e7c upstream. When inserting a DRC-cached response into the reply buffer, ensure that the reply buffer's xdr_stream is updated properly. Otherwise the server will send a garbage response. Cc: stable@vger.kernel.org # v6.3+ Reviewed-by: Jeff Layton Tested-by: Jeff Layton Signed-off-by: Chuck Lever Signed-off-by: Greg Kroah-Hartman * LoongArch: Mark __percpu functions as always inline commit 71945968d8b128c955204baa33ec03bdd91bdc26 upstream. A recent change to the optimization pipeline in LLVM reveals some fragility around the inlining of LoongArch's __percpu functions, which manifests as a BUILD_BUG() failure: In file included from kernel/sched/build_policy.c:17: In file included from include/linux/sched/cputime.h:5: In file included from include/linux/sched/signal.h:5: In file included from include/linux/rculist.h:11: In file included from include/linux/rcupdate.h:26: In file included from include/linux/irqflags.h:18: arch/loongarch/include/asm/percpu.h:97:3: error: call to '__compiletime_assert_51' declared with 'error' attribute: BUILD_BUG failed 97 | BUILD_BUG(); | ^ include/linux/build_bug.h:59:21: note: expanded from macro 'BUILD_BUG' 59 | #define BUILD_BUG() BUILD_BUG_ON_MSG(1, "BUILD_BUG failed") | ^ include/linux/build_bug.h:39:37: note: expanded from macro 'BUILD_BUG_ON_MSG' 39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg) | ^ include/linux/compiler_types.h:425:2: note: expanded from macro 'compiletime_assert' 425 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) | ^ include/linux/compiler_types.h:413:2: note: expanded from macro '_compiletime_assert' 413 | __compiletime_assert(condition, msg, prefix, suffix) | ^ include/linux/compiler_types.h:406:4: note: expanded from macro '__compiletime_assert' 406 | prefix ## suffix(); \ | ^ :86:1: note: expanded from here 86 | __compiletime_assert_51 | ^ 1 error generated. If these functions are not inlined (which the compiler is free to do even with functions marked with the standard 'inline' keyword), the BUILD_BUG() in the default case cannot be eliminated since the compiler cannot prove it is never used, resulting in a build failure due to the error attribute. Mark these functions as __always_inline to guarantee inlining so that the BUILD_BUG() only triggers when the default case genuinely cannot be eliminated due to an unexpected size. Cc: Closes: https://github.com/ClangBuiltLinux/linux/issues/1955 Fixes: 46859ac8af52 ("LoongArch: Add multi-processor (SMP) support") Link: https://github.com/llvm/llvm-project/commit/1a2e77cf9e11dbf56b5720c607313a566eebb16e Suggested-by: Nick Desaulniers Signed-off-by: Nathan Chancellor Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman * riscv: Using TOOLCHAIN_HAS_ZIHINTPAUSE marco replace zihintpause commit dd16ac404a685cce07e67261a94c6225d90ea7ba upstream. Actually it is a part of Conor's commit aae538cd03bc ("riscv: fix detection of toolchain Zihintpause support"). It is looks like a merge issue. Samuel's commit 0b1d60d6dd9e ("riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y") do not base on Conor's commit and revert to __riscv_zihintpause. So this patch can fix it. Signed-off-by: Minda Chen Fixes: 3c349eacc559 ("Merge patch "riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y"") Reviewed-by: Conor Dooley Link: https://lore.kernel.org/r/20230802064215.31111-1-minda.chen@starfivetech.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt Signed-off-by: Greg Kroah-Hartman * riscv: put interrupt entries into .irqentry.text commit 87615e95f6f9ccd36d4a3905a2d87f91967ea9d2 upstream. The interrupt entries are expected to be in the .irqentry.text section. For example, for kprobes to work properly, exception code cannot be probed; this is ensured by blacklisting addresses in the .irqentry.text section. Fixes: 7db91e57a0ac ("RISC-V: Task implementation") Signed-off-by: Nam Cao Link: https://lore.kernel.org/r/20230821145708.21270-1-namcaov@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt Signed-off-by: Greg Kroah-Hartman * riscv: mm: Update the comment of CONFIG_PAGE_OFFSET commit 559fe94a449cba5b50a7cffea60474b385598c00 upstream. Since the commit 011f09d12052 set sv57 as default for CONFIG_64BIT, the comment of CONFIG_PAGE_OFFSET should be updated too. Fixes: 011f09d12052 ("riscv: mm: Set sv57 on defaultly") Signed-off-by: Song Shuai Link: https://lore.kernel.org/r/20230809031023.3575407-1-songshuaishuai@tinylab.org Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt Signed-off-by: Greg Kroah-Hartman * riscv: correct pt_level name via pgtable_l5/4_enabled commit e59e5e2754bf983fc58ad18f99b5eec01f1a0745 upstream. The pt_level uses CONFIG_PGTABLE_LEVELS to display page table names. But if page mode is downgraded from kernel cmdline or restricted by the hardware in 64BIT, it will give a wrong name. Like, using no4lvl for sv39, ptdump named the 1G-mapping as "PUD" that should be "PGD": 0xffffffd840000000-0xffffffd900000000 0x00000000c0000000 3G PUD D A G . . W R V So select "P4D/PUD" or "PGD" via pgtable_l5/4_enabled to correct it. Fixes: e8a62cc26ddf ("riscv: Implement sv48 support") Reviewed-by: Alexandre Ghiti Signed-off-by: Song Shuai Link: https://lore.kernel.org/r/20230712115740.943324-1-suagrfillet@gmail.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230830044129.11481-3-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt Signed-off-by: Greg Kroah-Hartman * riscv: kprobes: allow writing to x0 commit 8cb22bec142624d21bc85ff96b7bad10b6220e6a upstream. Instructions can write to x0, so we should simulate these instructions normally. Currently, the kernel hangs if an instruction who writes to x0 is simulated. Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported") Cc: stable@vger.kernel.org Signed-off-by: Nam Cao Reviewed-by: Charlie Jenkins Acked-by: Guo Ren Link: https://lore.kernel.org/r/20230829182500.61875-1-namcaov@gmail.com Signed-off-by: Palmer Dabbelt Signed-off-by: Greg Kroah-Hartman * mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2 commit d7133797e9e1b72fd89237f68cb36d745599ed86 upstream. When GL9750 enters ASPM L1 sub-states, it will stay at L1.1 and will not enter L1.2. The workaround is to toggle PM state to allow GL9750 to enter ASPM L1.2. Signed-off-by: Victor Shih Link: https://lore.kernel.org/r/20230912091710.7797-1-victorshihgli@gmail.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman * mm: fix for negative counter: nr_file_hugepages commit a48d5bdc877b85201e42cef9c2fdf5378164c23a upstream. While qualifiying the 6.4 release, the following warning was detected in messages: vmstat_refresh: nr_file_hugepages -15664 The warning is caused by the incorrect updating of the NR_FILE_THPS counter in the function split_huge_page_to_list. The if case is checking for folio_test_swapbacked, but the else case is missing the check for folio_test_pmd_mappable. The other functions that manipulate the counter like __filemap_add_folio and filemap_unaccount_folio have the corresponding check. I have a test case, which reproduces the problem. It can be found here: https://github.com/sroeschus/testcase/blob/main/vmstat_refresh/madv.c The test case reproduces on an XFS filesystem. Running the same test case on a BTRFS filesystem does not reproduce the problem. AFAIK version 6.1 until 6.6 are affected by this problem. [akpm@linux-foundation.org: whitespace fix] [shr@devkernel.io: test for folio_test_pmd_mappable()] Link: https://lkml.kernel.org/r/20231108171517.2436103-1-shr@devkernel.io Link: https://lkml.kernel.org/r/20231106181918.1091043-1-shr@devkernel.io Signed-off-by: Stefan Roesch Co-debugged-by: Johannes Weiner Acked-by: Johannes Weiner Reviewed-by: Matthew Wilcox (Oracle) Reviewed-by: David Hildenbrand Reviewed-by: Yang Shi Cc: Rik van Riel Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman * mm: kmem: drop __GFP_NOFAIL when allocating objcg vectors commit 24948e3b7b12e0031a6edb4f49bbb9fb2ad1e4e9 upstream. Objcg vectors attached to slab pages to store slab object ownership information are allocated using gfp flags for the original slab allocation. Depending on slab page order and the size of slab objects, objcg vector can take several pages. If the original allocation was done with the __GFP_NOFAIL flag, it triggered a warning in the page allocation code. Indeed, order > 1 pages should not been allocated with the __GFP_NOFAIL flag. Fix this by simply dropping the __GFP_NOFAIL flag when allocating the objcg vector. It effectively allows to skip the accounting of a single slab object under a heavy memory pressure. An alternative would be to implement the mechanism to fallback to order-0 allocations for accounting metadata, which is also not perfect because it will increase performance penalty and memory footprint of the kernel memory accounting under memory pressure. Link: https://lkml.kernel.org/r/ZUp8ZFGxwmCx4ZFr@P9FQF9L96D.corp.robot.car Signed-off-by: Roman Gushchin Reported-by: Christoph Lameter Closes: https://lkml.kernel.org/r/6b42243e-f197-600a-5d22-56bd728a5ad8@gentwo.org Acked-by: Shakeel Butt Cc: Matthew Wilcox Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman * mptcp: deal with large GSO size commit 9fce92f050f448a0d1ddd9083ef967d9930f1e52 upstream. After the blamed commit below, the TCP sockets (and the MPTCP subflows) can build egress packets larger than 64K. That exceeds the maximum DSS data size, the length being misrepresent on the wire and the stream being corrupted, as later observed on the receiver: WARNING: CPU: 0 PID: 9696 at net/mptcp/protocol.c:705 __mptcp_move_skbs_from_subflow+0x2604/0x26e0 CPU: 0 PID: 9696 Comm: syz-executor.7 Not tainted 6.6.0-rc5-gcd8bdf563d46 #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'. RIP: 0010:__mptcp_move_skbs_from_subflow+0x2604/0x26e0 net/mptcp/protocol.c:705 RSP: 0018:ffffc90000006e80 EFLAGS: 00010246 RAX: ffffffff83e9f674 RBX: ffff88802f45d870 RCX: ffff888102ad0000 netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'. RDX: 0000000080000303 RSI: 0000000000013908 RDI: 0000000000003908 RBP: ffffc90000007110 R08: ffffffff83e9e078 R09: 1ffff1100e548c8a R10: dffffc0000000000 R11: ffffed100e548c8b R12: 0000000000013908 R13: dffffc0000000000 R14: 0000000000003908 R15: 000000000031cf29 FS: 00007f239c47e700(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f239c45cd78 CR3: 000000006a66c006 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: mptcp_data_ready+0x263/0xac0 net/mptcp/protocol.c:819 subflow_data_ready+0x268/0x6d0 net/mptcp/subflow.c:1409 tcp_data_queue+0x21a1/0x7a60 net/ipv4/tcp_input.c:5151 tcp_rcv_established+0x950/0x1d90 net/ipv4/tcp_input.c:6098 tcp_v6_do_rcv+0x554/0x12f0 net/ipv6/tcp_ipv6.c:1483 tcp_v6_rcv+0x2e26/0x3810 net/ipv6/tcp_ipv6.c:1749 ip6_protocol_deliver_rcu+0xd6b/0x1ae0 net/ipv6/ip6_input.c:438 ip6_input+0x1c5/0x470 net/ipv6/ip6_input.c:483 ipv6_rcv+0xef/0x2c0 include/linux/netfilter.h:304 __netif_receive_skb+0x1ea/0x6a0 net/core/dev.c:5532 process_backlog+0x353/0x660 net/core/dev.c:5974 __napi_poll+0xc6/0x5a0 net/core/dev.c:6536 net_rx_action+0x6a0/0xfd0 net/core/dev.c:6603 __do_softirq+0x184/0x524 kernel/softirq.c:553 do_softirq+0xdd/0x130 kernel/softirq.c:454 Address the issue explicitly bounding the maximum GSO size to what MPTCP actually allows. Reported-by: Christoph Paasch Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/450 Fixes: 7c4e983c4f3c ("net: allow gso_max_size to exceed 65536") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-1-7b9cd6a7b7f4@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman * mptcp: add validity check for sending RM_ADDR commit 8df220b29282e8b450ea57be62e1eccd4996837c upstream. This patch adds the validity check for sending RM_ADDRs for userspace PM in mptcp_pm_remove_addrs(), only send a RM_ADDR when the address is in the anno_list or conn_list. Fixes: 8b1c94da1e48 ("mptcp: only send RM_ADDR in nl_cmd_remove") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-3-7b9cd6a7b7f4@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman * mptcp: fix setsockopt(IP_TOS) subflow locking commit 7679d34f97b7a09fd565f5729f79fd61b7c55329 upstream. The MPTCP implementation of the IP_TOS socket option uses the lockless variant of the TOS manipulation helper and does not hold such lock at the helper invocation time. Add the required locking. Fixes: ffcacff87cd6 ("mptcp: Support for IP_TOS for MPTCP setsockopt()") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/457 Signed-off-by: Paolo Abeni Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-4-7b9cd6a7b7f4@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman * selftests: mptcp: fix fastclose with csum failure commit 7cefbe5e1dacc7236caa77e9d072423f21422fe2 upstream. Running the mp_join selftest manually with the following command line: ./mptcp_join.sh -z -C leads to some failures: 002 fastclose server test # ... rtx [fail] got 1 MP_RST[s] TX expected 0 # ... rstrx [fail] got 1 MP_RST[s] RX expected 0 The problem is really in the wrong expectations for the RST checks implied by the csum validation. Note that the same check is repeated explicitly in the same test-case, with the correct expectation and pass successfully. Address the issue explicitly setting the correct expectation for the failing checks. Reported-by: Xiumei Mu Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts Signed-off-by: Matthieu Baerts Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-5-7b9cd6a7b7f4@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman * r8169: fix network lost after resume on DASH systems commit 868c3b95afef4883bfb66c9397482da6840b5baf upstream. Device that support DASH may be reseted or powered off during suspend. So driver needs to handle DASH during system suspend and resume. Or DASH firmware will influence device behavior and causes network lost. Fixes: b646d90053f8 ("r8169: magic.") Cc: stable@vger.kernel.org Reviewed-by: Heiner Kallweit Signed-off-by: ChunHao Lin Link: https://lore.kernel.org/r/20231109173400.4573-3-hau@realtek.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman * r8169: add handling DASH when DASH is disabled commit 0ab0c45d8aaea5192328bfa6989673aceafc767c upstream. For devices that support DASH, even DASH is disabled, there may still exist a default firmware that will influence device behavior. So driver needs to handle DASH for devices that support DASH, no matter the DASH status is. This patch also prepares for "fix network lost after resume on DASH systems". Fixes: ee7a1beb9759 ("r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware dash function is enabled") Cc: stable@vger.kernel.org Signed-off-by: ChunHao Lin Reviewed-by: Heiner Kallweit Link: https://lore.kernel.org/r/20231109173400.4573-2-hau@realtek.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman * mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER commit 015c9cbcf0ad709079117d27c2094a46e0eadcdb upstream. Due to a flaw in the hardware design, the GL9750 replay timer frequently times out when ASPM is enabled. As a result, the warning messages will often appear in the system log when the system accesses the GL9750 PCI config. Therefore, the replay timer timeout must be masked. Fixes: d7133797e9e1 ("mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2") Signed-off-by: Victor Shih Acked-by: Adrian Hunter Acked-by: Kai-Heng Feng Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231107095741.8832-2-victorshihgli@gmail.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman * media: qcom: camss: Fix pm_domain_on sequence in probe commit 7405116519ad70b8c7340359bfac8db8279e7ce4 upstream. We need to make sure camss_configure_pd() happens before camss_register_entities() as the vfe_get() path relies on the pointer provided by camss_configure_pd(). Fix the ordering sequence in probe to ensure the pointers vfe_get() demands are present by the time camss_register_entities() runs. In order to facilitate backporting to stable kernels I've moved the configure_pd() call pretty early on the probe() function so that irrespective of the existence of the old error handling jump labels this patch should still apply to -next circa Aug 2023 to v5.13 inclusive. Fixes: 2f6f8af67203 ("media: camss: Refactor VFE power domain toggling") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue Reviewed-by: Laurent Pinchart Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman * media: qcom: camss: Fix vfe_get() error jump commit 26bda3da00c3edef727a6acb00ed2eb4b22f8723 upstream. Right now it is possible to do a vfe_get() with the internal reference count at 1. If vfe_check_clock_rates() returns non-zero then we will leave the reference count as-is and run: - pm_runtime_put_sync() - vfe->ops->pm_domain_off() skip: - camss_disable_clocks() Subsequent vfe_put() calls will when the ref-count is non-zero unconditionally run: - pm_runtime_put_sync() - vfe->ops->pm_domain_off() - camss_disable_clocks() vfe_get() should not attempt to roll-back on error when the ref-count is non-zero as the upper layers will still do their own vfe_put() operations. vfe_put() will drop the reference count and do the necessary power domain release, the cleanup jumps in vfe_get() should only be run when the ref-count is zero. [ 50.095796] CPU: 7 PID: 3075 Comm: cam Not tainted 6.3.2+ #80 [ 50.095798] Hardware name: LENOVO 21BXCTO1WW/21BXCTO1WW, BIOS N3HET82W (1.54 ) 05/26/2023 [ 50.095799] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 50.095802] pc : refcount_warn_saturate+0xf4/0x148 [ 50.095804] lr : refcount_warn_saturate+0xf4/0x148 [ 50.095805] sp : ffff80000c7cb8b0 [ 50.095806] x29: ffff80000c7cb8b0 x28: ffff16ecc0e3fc10 x27: 0000000000000000 [ 50.095810] x26: 0000000000000000 x25: 0000000000020802 x24: 0000000000000000 [ 50.095813] x23: ffff16ecc7360640 x22: 00000000ffffffff x21: 0000000000000005 [ 50.095815] x20: ffff16ed175f4400 x19: ffffb4d9852942a8 x18: ffffffffffffffff [ 50.095818] x17: ffffb4d9852d4a48 x16: ffffb4d983da5db8 x15: ffff80000c7cb320 [ 50.095821] x14: 0000000000000001 x13: 2e656572662d7265 x12: 7466612d65737520 [ 50.095823] x11: 00000000ffffefff x10: ffffb4d9850cebf0 x9 : ffffb4d9835cf954 [ 50.095826] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8 [ 50.095829] x5 : ffff16f813fe3d08 x4 : 0000000000000000 x3 : ffff621e8f4d2000 [ 50.095832] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff16ed32119040 [ 50.095835] Call trace: [ 50.095836] refcount_warn_saturate+0xf4/0x148 [ 50.095838] device_link_put_kref+0x84/0xc8 [ 50.095843] device_link_del+0x38/0x58 [ 50.095846] vfe_pm_domain_off+0x3c/0x50 [qcom_camss] [ 50.095860] vfe_put+0x114/0x140 [qcom_camss] [ 50.095869] csid_set_power+0x2c8/0x408 [qcom_camss] [ 50.095878] pipeline_pm_power_one+0x164/0x170 [videodev] [ 50.095896] pipeline_pm_power+0xc4/0x110 [videodev] [ 50.095909] v4l2_pipeline_pm_use+0x5c/0xa0 [videodev] [ 50.095923] v4l2_pipeline_pm_get+0x1c/0x30 [videodev] [ 50.095937] video_open+0x7c/0x100 [qcom_camss] [ 50.095945] v4l2_open+0x84/0x130 [videodev] [ 50.095960] chrdev_open+0xc8/0x250 [ 50.095964] do_dentry_open+0x1bc/0x498 [ 50.095966] vfs_open+0x34/0x40 [ 50.095968] path_openat+0xb44/0xf20 [ 50.095971] do_filp_open+0xa4/0x160 [ 50.095974] do_sys_openat2+0xc8/0x188 [ 50.095975] __arm64_sys_openat+0x6c/0xb8 [ 50.095977] invoke_syscall+0x50/0x128 [ 50.095982] el0_svc_common.constprop.0+0x4c/0x100 [ 50.095985] do_el0_svc+0x40/0xa8 [ 50.095988] el0_svc+0x2c/0x88 [ 50.095991] el0t_64_sync_handler+0xf4/0x120 [ 50.095994] el0t_64_sync+0x190/0x198 [ 50.095996] ---[ end trace 0000000000000000 ]--- Fixes: 779096916dae ("media: camss: vfe: Fix runtime PM imbalance on error") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue Reviewed-by: Laurent Pinchart Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman * media: qcom: camss: Fix VFE-17x vfe_disable_output() commit 3143ad282fc08bf995ee73e32a9e40c527bf265d upstream. There are two problems with the current vfe_disable_output() routine. Firstly we rightly use a spinlock to protect output->gen2.active_num everywhere except for in the IDLE timeout path of vfe_disable_output(). Even if that is not racy "in practice" somehow it is by happenstance not by design. Secondly we do not get consistent behaviour from this routine. On sc8280xp 50% of the time I get "VFE idle timeout - resetting". In this case the subsequent capture will succeed. The other 50% of the time, we don't hit the idle timeout, never do the VFE reset and subsequent captures stall indefinitely. Rewrite the vfe_disable_output() routine to - Quiesce write masters with vfe_wm_stop() - Set active_num = 0 remembering to hold the spinlock when we do so followed by - Reset the VFE Testing on sc8280xp and sdm845 shows this to be a valid fix. Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman * media: qcom: camss: Fix VFE-480 vfe_disable_output() commit 7f24d291350426d40b36dfbe6b3090617cdfd37a upstream. vfe-480 is copied from vfe-17x and has the same racy idle timeout bug as in 17x. Fix the vfe_disable_output() logic to no longer be racy and to conform to the 17x way of quiescing and then resetting the VFE. Fixes: 4edc8eae715c ("media: camss: Add initial support for VFE hardware version Titan 480") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman * media: qcom: camss: Fix missing vfe_lite clocks check commit b6e1bdca463a932c1ac02caa7d3e14bf39288e0c upstream. check_clock doesn't account for vfe_lite which means that vfe_lite will never get validated by this routine. Add the clock name to the expected set to remediate. Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue Reviewed-by: Laurent Pinchart Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman * media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater than 3 commit e655d1ae9703286cef7fda8675cad62f649dc183 upstream. VC_MODE = 0 implies a two bit VC address. VC_MODE = 1 is required for VCs with a larger address than two bits. Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue Reviewed-by: Laurent Pinchart Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman * media: qcom: camss: Fix invalid clock enable bit disjunction commit d8f7e1a60d01739a1d78db2b08603089c6cf7c8e upstream. define CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE BIT(7) disjunction for gen2 ? BIT(7) : is a nop we are setting the same bit either way. Fixes: 4abb21309fda ("media: camss: csiphy: Move to hardcode CSI Clock Lane number") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue Reviewed-by: Konrad Dybcio Reviewed-by: Laurent Pinchart Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman * media: qcom: camss: Fix csid-gen2 for test pattern generator commit 87889f1b7ea40d2544b49c62092e6ef2792dced7 upstream. In the current driver csid Test Pattern Generator (TPG) doesn't work. This change: - fixes writing frame width and height values into CSID_TPG_DT_n_CFG_0 - fixes the shift by one between test_pattern control value and the actual pattern. - drops fixed VC of 0x0a which testing showed prohibited some test patterns in the CSID to produce output. So that TPG starts working, but with the below limitations: - only test_pattern=9 works as it should - test_pattern=8 and test_pattern=7 produce black frame (all zeroes) - the rest of test_pattern's don't work (yavta doesn't get the data) - regardless of the CFA pattern set by 'media-ctl -V' the actual pixel order is always the same (RGGB for any RAW8 or RAW10P format in 4608x2592 resolution). Tested with: RAW10P format, VC0: media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4608x2592 field:none]' media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4608x2592 field:none]' media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video0 RAW10P format, VC1: media-ctl -V '"msm_csid0":2[fmt:SRGGB10/4608x2592 field:none]' media-ctl -V '"msm_vfe0_rdi1":0[fmt:SRGGB10/4608x2592 field:none]' media-ctl -l '"msm_csid0":2->"msm_vfe0_rdi1":0[1]' v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video1 RAW8 format, VC0: media-ctl --reset media-ctl -V '"msm_csid0":0[fmt:SRGGB8/4608x2592 field:none]' media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB8/4608x2592 field:none]' media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' yavta -B capture-mplane --capture=3 -n 3 -f SRGGB8 -s 4608x2592 /dev/video0 Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170") Cc: stable@vger.kernel.org Signed-off-by: Andrey Konovalov Signed-off-by: Bryan O'Donoghue Reviewed-by: Laurent Pinchart Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman * Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" commit 6a26310273c323380da21eb23fcfd50e31140913 upstream. This reverts commit efa5f1311c4998e9e6317c52bc5ee93b3a0f36df. I couldn't reproduce the reported issue. What I did, based on a pcap packet log provided by the reporter: - Used same chip version (RTL8168h) - Set MAC address to the one used on the reporters system - Replayed the EAPOL unicast packet that, according to the reporter, was filtered out by the mc filter. The packet was properly received. Therefore the root cause of the reported issue seems to be somewhere else. Disabling mc filtering completely for the most common chip version is a quite big hammer. Therefore revert the change and wait for further analysis results from the reporter. Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman * ext4: fix race between writepages and remount commit 745f17a4166e79315e4b7f33ce89d03e75a76983 upstream. We got a WARNING in ext4_add_complete_io: ================================================================== WARNING: at fs/ext4/page-io.c:231 ext4_put_io_end_defer+0x182/0x250 CPU: 10 PID: 77 Comm: ksoftirqd/10 Tainted: 6.3.0-rc2 #85 RIP: 0010:ext4_put_io_end_defer+0x182/0x250 [ext4] [...] Call Trace: ext4_end_bio+0xa8/0x240 [ext4] bio_endio+0x195/0x310 blk_update_request+0x184/0x770 scsi_end_request+0x2f/0x240 scsi_io_completion+0x75/0x450 scsi_finish_command+0xef/0x160 scsi_complete+0xa3/0x180 blk_complete_reqs+0x60/0x80 blk_done_softirq+0x25/0x40 __do_softirq+0x119/0x4c8 run_ksoftirqd+0x42/0x70 smpboot_thread_fn+0x136/0x3c0 kthread+0x140/0x1a0 ret_from_fork+0x2c/0x50 ================================================================== Above issue may happen as follows: cpu1 cpu2 ----------------------------|---------------------------- mount -o dioread_lock ext4_writepages ext4_do_writepages *if (ext4_should_dioread_nolock(inode))* // rsv_blocks is not assigned here mount -o remount,dioread_nolock ext4_journal_start_with_reserve __ext4_journal_start __ext4_journal_start_sb jbd2__journal_start *if (rsv_blocks)* // h_rsv_handle is not initialized here mpage_map_and_submit_extent mpage_map_one_extent dioread_nolock = ext4_should_dioread_nolock(inode) if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN)) mpd->io_submit.io_end->handle = handle->h_rsv_handle ext4_set_io_unwritten_flag io_end->flag |= EXT4_IO_END_UNWRITTEN // now io_end->handle is NULL but has EXT4_IO_END_UNWRITTEN flag scsi_finish_command scsi_io_completion scsi_io_completion_action scsi_end_request blk_update_request req_bio_endio bio_endio bio->bi_end_io > ext4_end_bio ext4_put_io_end_defer ext4_add_complete_io // trigger WARN_ON(!io_end->handle && sbi->s_journal); The immediate cause of this problem is that ext4_should_dioread_nolock() function returns inconsistent values in the ext4_do_writepages() and mpage_map_one_extent(). There are four conditions in this function that can be changed at mount time to cause this problem. These four conditions can be divided into two categories: (1) journal_data and EXT4_EXTENTS_FL, which can be changed by ioctl (2) DELALLOC and DIOREAD_NOLOCK, which can be changed by remount The two in the first category have been fixed by commit c8585c6fcaf2 ("ext4: fix races between changing inode journal mode and ext4_writepages") and commit cb85f4d23f79 ("ext4: fix race between writepages and enabling EXT4_EXTENTS_FL") respectively. Two cases in the other category have not yet been fixed, and the above issue is caused by this situation. We refer to the fix for the first category, when applying options during remount, we grab s_writepages_rwsem to avoid racing with writepages ops to trigger this problem. Fixes: 6b523df4fb5a ("ext4: use transaction reservation for extent conversion in ext4_end_io") Cc: stable@vger.kernel.org Signed-off-by: Baokun Li Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20230524072538.2883391-1-libaokun1@huawei.com Signed-off-by…

arm desktop内核的RPM和deb包 #12

Description

Metadata

Metadata

Assignees

Labels

Type

Projects

Milestone

Relationships

Development

Issue actions