Merge tag 'thermal-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more thermal control updates from Rafael Wysocki:
 "These are updates of assorted thermal drivers, mostly for ARM
  platforms, generally isolated and fairly straightforward, and the
  recent Intel HFI driver fix for systems without HFI support.

  Specifics:

   - Avoid clearing the HFI status bit on systems without HFI support
     which triggers unchecked MSR access errors (Srinivas Pandruvada)

   - Add sm8450 and sm8550 QCom compatible string to DT bindings (Luca
     Weiss, Neil Armstrong)

   - Use devm_platform_get_and_ioremap_resource on the ST platform to
     group two calls into a single one (Minghao Chi)

   - Use GENMASK instead of bitmaps and validate the temperature after
     reading it in the imx8mm_thermal driver (Marcus Folkesson)

   - Convert generic-adc-thermal to DT schema (Rob Herring)

   - Fix debug print message with inverted logic in the k3_j72xx_bandgap
     driver (Keerthy)

   - Fix memory leak on thermal_of_zone_register() failure (Ido
     Schimmel)

   - Add support for IPQ8074 in the tsens thermal driver along with the
     DT bindings (Robert Marko)

   - Fix and rework the debugfs code in the tsens driver (Christian
     Marangi)

   - Add calibration and DT documentation for the imx8mm driver (Marek
     Vasut)

   - Add DT bindings and compatible for the Mediatek SoCs mt7981 and
     mt7983 (Daniel Golle)

   - Don't show an error message if it happens at probe time while it
     will be deferred on the QCom SPMI ADC driver (Johan Hovold)

   - Add HWMon support for the imx8mm board (Alexander Stein)

   - Remove pointless include from the power allocator governor
     (Christophe JAILLET)

   - Add interrupt DT bindings for QCom SoCs SC8280XP, SM6350 and SM8450
     (Krzysztof Kozlowski)

   - Fix inaccurate warning message for the QCom tsens gen2 (Luca Weiss)

   - Demote error log of thermal zone register to debug in the tsens
     QCom driver (Manivannan Sadhasivam)

   - Consolidate the the efuse values and the errata handling in the TI
     Bandgap driver (Bryan Brattlof)

   - Document Renesas RZ/Five as compatible with RZ/G2UL in the DT
     bindings (Lad Prabhakar)

   - Fix the irq handler return value in the LMh driver (Bjorn
     Andersson)

   - Delete empty platform remove callback from imx_sc_thermal (Uwe
     Kleine-König)"

* tag 'thermal-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
  thermal/drivers/imx_sc_thermal: Drop empty platform remove function
  thermal/drivers/qcom/lmh: Fix irq handler return value
  dt-bindings: thermal: qcom-tsens: Add compatible for sm8550
  thermal/drivers/st: Use devm_platform_get_and_ioremap_resource()
  dt-bindings: thermal: rzg2l-thermal: Document RZ/Five SoC
  dt-bindings: thermal: k3-j72xx: conditionally require efuse reg range
  dt-bindings: thermal: k3-j72xx: elaborate on binding description
  thermal/drivers/k3_j72xx_bandgap: Map fuse_base only for erratum workaround
  thermal/drivers/k3_j72xx_bandgap: Remove fuse_base from structure
  thermal/drivers/k3_j72xx_bandgap: Use bool for i2128 erratum flag
  thermal/drivers/k3_j72xx_bandgap: Simplify k3_thermal_get_temp() function
  thermal/drivers/qcom: Demote error log of thermal zone register to debug
  thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2
  dt-bindings: thermal: qcom-tsens: narrow interrupts for SC8280XP, SM6350 and SM8450
  thermal/core/power allocator: Remove a useless include
  thermal/drivers/imx8mm: Add hwmon support
  thermal: qcom-spmi-adc-tm5: suppress probe-deferral error message
  dt-bindings: thermal: mediatek: add compatible string for MT7986 and MT7981 SoC
  thermal: ti-soc-thermal: Drop comma after SoC match table sentinel
  thermal/drivers/imx: Add support for loading calibration data from OCOTP
  ...

Author: torvalds

Documentation/devicetree/bindings/thermal/generic-adc-thermal.yaml

@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/generic-adc-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: General Purpose Analog To Digital Converter (ADC) based thermal sensor
+
+maintainers:
+  - Laxman Dewangan <[email protected]>
+
+description:
+  On some of platforms, thermal sensor like thermistors are connected to
+  one of ADC channel and sensor resistance is read via voltage across the
+  sensor resistor. The voltage read across the sensor is mapped to
+  temperature using voltage-temperature lookup table.
+
+properties:
+  compatible:
+    const: generic-adc-thermal
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    const: sensor-channel
+
+  temperature-lookup-table:
+    description: |
+      Lookup table to map the relation between ADC value and temperature.
+      When ADC is read, the value is looked up on the table to get the
+      equivalent temperature.
+
+      If not specified, driver assumes the ADC channel gives milliCelsius
+      directly.
+    $ref: /schemas/types.yaml#/definitions/int32-matrix
+    items:
+      items:
+        - description: Temperature in milliCelsius
+        - description: ADC read value
+
+required:
+  - compatible
+  - '#thermal-sensor-cells'
+  - io-channels
+  - io-channel-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/thermal/thermal.h>
+
+    thermal-sensor {
+        compatible = "generic-adc-thermal";
+        #thermal-sensor-cells = <0>;
+        io-channels = <&ads1015 1>;
+        io-channel-names = "sensor-channel";
+        temperature-lookup-table = <
+              (-40000) 2578
+              (-39000) 2577
+              (-38000) 2576
+              (-37000) 2575
+              (-36000) 2574
+              (-35000) 2573
+              (-34000) 2572
+              (-33000) 2571
+              (-32000) 2569
+              (-31000) 2568
+              (-30000) 2567
+              /* skip */
+              118000 254
+              119000 247
+              120000 240
+              121000 233
+              122000 226
+              123000 220
+              124000 214
+              125000 208>;
+    };
+...

Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml

@@ -32,6 +32,13 @@ properties:
   clocks:
     maxItems: 1
 
+  nvmem-cells:
+    maxItems: 1
+    description: Phandle to the calibration data provided by ocotp
+
+  nvmem-cell-names:
+    const: calib
+
   "#thermal-sensor-cells":
     description: |
       Number of cells required to uniquely identify the thermal

Documentation/devicetree/bindings/thermal/mediatek-thermal.txt

@@ -13,6 +13,8 @@ Required properties:
   - "mediatek,mt2701-thermal" : For MT2701 family of SoCs
   - "mediatek,mt2712-thermal" : For MT2712 family of SoCs
   - "mediatek,mt7622-thermal" : For MT7622 SoC
+  - "mediatek,mt7981-thermal", "mediatek,mt7986-thermal" : For MT7981 SoC
+  - "mediatek,mt7986-thermal" : For MT7986 SoC
   - "mediatek,mt8183-thermal" : For MT8183 family of SoCs
   - "mediatek,mt8516-thermal", "mediatek,mt2701-thermal : For MT8516 family of SoCs
 - reg: Address range of the thermal controller

Documentation/devicetree/bindings/thermal/qcom-tsens.yaml

@@ -58,24 +58,26 @@ properties:
               - qcom,sm8150-tsens
               - qcom,sm8250-tsens
               - qcom,sm8350-tsens
+              - qcom,sm8450-tsens
+              - qcom,sm8550-tsens
           - const: qcom,tsens-v2
 
+      - description: v2 of TSENS with combined interrupt
+        enum:
+          - qcom,ipq8074-tsens
+
   reg:
     items:
       - description: TM registers
       - description: SROT registers
 
   interrupts:
     minItems: 1
-    items:
-      - description: Combined interrupt if upper or lower threshold crossed
-      - description: Interrupt if critical threshold crossed
+    maxItems: 2
 
   interrupt-names:
     minItems: 1
-    items:
-      - const: uplow
-      - const: critical
+    maxItems: 2
 
   nvmem-cells:
     minItems: 1
@@ -129,22 +131,64 @@ allOf:
     then:
       properties:
         interrupts:
-          maxItems: 1
+          items:
+            - description: Combined interrupt if upper or lower threshold crossed
         interrupt-names:
-          maxItems: 1
+          items:
+            - const: uplow
 
-    else:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8953-tsens
+              - qcom,msm8996-tsens
+              - qcom,msm8998-tsens
+              - qcom,sc7180-tsens
+              - qcom,sc7280-tsens
+              - qcom,sc8180x-tsens
+              - qcom,sc8280xp-tsens
+              - qcom,sdm630-tsens
+              - qcom,sdm845-tsens
+              - qcom,sm6350-tsens
+              - qcom,sm8150-tsens
+              - qcom,sm8250-tsens
+              - qcom,sm8350-tsens
+              - qcom,sm8450-tsens
+              - qcom,tsens-v2
+    then:
       properties:
         interrupts:
-          minItems: 2
+          items:
+            - description: Combined interrupt if upper or lower threshold crossed
+            - description: Interrupt if critical threshold crossed
         interrupt-names:
-          minItems: 2
+          items:
+            - const: uplow
+            - const: critical
 
   - if:
       properties:
         compatible:
           contains:
             enum:
+              - qcom,ipq8074-tsens
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: Combined interrupt if upper, lower or critical thresholds crossed
+        interrupt-names:
+          items:
+            - const: combined
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-tsens
               - qcom,tsens-v0_1
               - qcom,tsens-v1
               - qcom,tsens-v2
@@ -227,4 +271,19 @@ examples:
            #qcom,sensors = <13>;
            #thermal-sensor-cells = <1>;
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example 4 (for any IPQ8074 based SoC-s):
+    tsens4: thermal-sensor@4a9000 {
+           compatible = "qcom,ipq8074-tsens";
+           reg = <0x4a9000 0x1000>,
+                 <0x4a8000 0x1000>;
+
+           interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+           interrupt-names = "combined";
+
+           #qcom,sensors = <16>;
+           #thermal-sensor-cells = <1>;
+    };
 ...

Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml

@@ -17,7 +17,7 @@ properties:
   compatible:
     items:
       - enum:
-          - renesas,r9a07g043-tsu # RZ/G2UL
+          - renesas,r9a07g043-tsu # RZ/G2UL and RZ/Five
           - renesas,r9a07g044-tsu # RZ/G2{L,LC}
           - renesas,r9a07g054-tsu # RZ/V2L
       - const: renesas,rzg2l-tsu

Documentation/devicetree/bindings/thermal/thermal-generic-adc.txt

@@ -9,6 +9,19 @@ title: Texas Instruments J72XX VTM (DTS) binding
 maintainers:
   - Keerthy <[email protected]>
 
+description: |
+  The TI K3 family of SoCs typically have a Voltage & Thermal
+  Management (VTM) device to control up to 8 temperature diode
+  sensors to measure silicon junction temperatures from different
+  hotspots of the chip as well as provide temperature, interrupt
+  and alerting information.
+
+  The following polynomial equation can then be used to convert
+  value returned by this device into a temperature in Celsius
+
+  Temp(C) = (-9.2627e-12) * x^4 + (6.0373e-08) * x^3 + \
+            (-1.7058e-04) * x^2 + (3.2512e-01) * x   + (-4.9003e+01)
+
 properties:
   compatible:
     enum:
@@ -19,14 +32,34 @@ properties:
     items:
       - description: VTM cfg1 register space
       - description: VTM cfg2 register space
-      - description: VTM efuse register space
+      - description: |
+          A software trimming method must be applied to some Jacinto
+          devices to function properly. This eFuse region provides
+          the information needed for these SoCs to report
+          temperatures accurately.
+    minItems: 2
 
   power-domains:
     maxItems: 1
 
   "#thermal-sensor-cells":
     const: 1
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721e-vtm
+    then:
+      properties:
+        reg:
+          minItems: 3
+    else:
+      properties:
+        reg:
+          maxItems: 2
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml

@@ -8,7 +8,6 @@
 
 #define pr_fmt(fmt) "Power allocator: " fmt
 
-#include <linux/rculist.h>
 #include <linux/slab.h>
 #include <linux/thermal.h>