Allow compilation for Amdgpu-target Gfx1010 #1

ghostplant · 2020-02-01T17:25:40Z

Allow compilation for Amdgpu-target Gfx1010

The code changes here are hopefully straightforward: 1. Use MachineInstruction flags to decide if FP ops can be reassociated (use both "reassoc" and "nsz" to be consistent with IR transforms; we probably don't need "nsz", but that's a safer interpretation of the FMF). 2. Check that both nodes allow reassociation to change instructions. This is a stronger requirement than we've usually implemented in IR/DAG, but this is needed to solve the motivating bug (see below), and it seems unlikely to impede optimization at this late stage. 3. Intersect/propagate MachineIR flags to enable further reassociation in MachineCombiner. We managed to make MachineCombiner flexible enough that no changes are needed to that pass itself. So this patch should only affect x86 (assuming no other targets have implemented the hooks using MachineIR flags yet). The motivating example in PR43609 is another case of fast-math transforms interacting badly with special FP ops created during lowering: https://bugs.llvm.org/show_bug.cgi?id=43609 The special fadd ops used for converting int to FP assume that they will not be altered, so those are created without FMF. However, the MachineCombiner pass was being enabled for FP ops using the global/function-level TargetOption for "UnsafeFPMath". We managed to run instruction/node-level FMF all the way down to MachineIR sometime in the last 1-2 years though, so we can do better now. The test diffs require some explanation: 1. llvm/test/CodeGen/X86/fmf-flags.ll - no target option for unsafe math was specified here, so MachineCombiner kicks in where it did not previously; to make it behave consistently, we need to specify a CPU schedule model, so use the default model, and there are no code diffs. 2. llvm/test/CodeGen/X86/machine-combiner.ll - replace the target option for unsafe math with the equivalent IR-level flags, and there are no code diffs; we can't remove the NaN/nsz options because those are still used to drive x86 fmin/fmax codegen (special SDAG opcodes). 3. llvm/test/CodeGen/X86/pow.ll - similar to #1 4. llvm/test/CodeGen/X86/sqrt-fastmath.ll - similar to #1, but MachineCombiner does some reassociation of the estimate sequence ops; presumably these are perf wins based on latency/throughput (and we get some reduction of move instructions too); I'm not sure how it affects numerical accuracy, but the test reflects reality better now because we would expect MachineCombiner to be enabled if the IR was generated via something like "-ffast-math" with clang. 5. llvm/test/CodeGen/X86/vec_int_to_fp.ll - this is the test added to model PR43609; the fadds are not reassociated now, so we should get the expected results. 6. llvm/test/CodeGen/X86/vector-reduce-fadd-fast.ll - similar to #1 7. llvm/test/CodeGen/X86/vector-reduce-fmul-fast.ll - similar to #1 Differential Revision: https://reviews.llvm.org/D74851

This reverts commit dfecec6. Merging the change revealed that there is a failure on the memory sanitizer bots. Command Output (stderr): -- ==3569==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x1d71bff in llvm::AVRSubtarget::ParseSubtargetFeatures(llvm::StringRef, llvm::StringRef) /b/sanitizer-x86_64-linux-fast/build/llvm_build_msan/lib/Target/AVR/AVRGenSubtargetInfo.inc:471:7 #1 0x1d721f8 in initializeSubtargetDependencies /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/lib/Target/AVR/AVRSubtarget.cpp:50:3 #2 0x1d721f8 in llvm::AVRSubtarget::AVRSubtarget(llvm::Triple const&, std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> > const&, std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> > const&, llvm::AVRTargetMachine const&) /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/lib/Target/AVR/AVRSubtarget.cpp:33:18 #3 0x1d3077f in llvm::AVRTargetMachine::AVRTargetMachine(llvm::Target const&, llvm::Triple const&, llvm::StringRef, llvm::StringRef, llvm::TargetOptions const&, llvm::Optional<llvm::Reloc::Model>, llvm::Optional<llvm::CodeModel::Model>, llvm::CodeGenOpt::Level, bool) /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/lib/Target/AVR/AVRTargetMachine.cpp:52:7 #4 0x1d3169d in llvm::RegisterTargetMachine<llvm::AVRTargetMachine>::Allocator(llvm::Target const&, llvm::Triple const&, llvm::StringRef, llvm::StringRef, llvm::TargetOptions const&, llvm::Optional<llvm::Reloc::Model>, llvm::Optional<llvm::CodeModel::Model>, llvm::CodeGenOpt::Level, bool) /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/include/llvm/Support/TargetRegistry.h:1121:16 #5 0x86662f in createTargetMachine /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/include/llvm/Support/TargetRegistry.h:402:12 #6 0x86662f in compileModule(char**, llvm::LLVMContext&) /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/tools/llc/llc.cpp:473:52 #7 0x861f42 in main /b/sanitizer-x86_64-linux-fast/build/llvm-project/llvm/tools/llc/llc.cpp:356:22 #8 0x7f76f7b072e0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202e0) #9 0x7ebbc9 in _start (/b/sanitizer-x86_64-linux-fast/build/llvm_build_msan/bin/llc+0x7ebbc9) SUMMARY: MemorySanitizer: use-of-uninitialized-value /b/sanitizer-x86_64-linux-fast/build/llvm_build_msan/lib/Target/AVR/AVRGenSubtargetInfo.inc:471:7 in llvm::AVRSubtarget::ParseSubtargetFeatures(llvm::StringRef, llvm::StringRef) Exiting FileCheck error: '<stdin>' is empty. -- The patch wiill be re-committed once fixed.

Summary: This patch adds IR intrinsics for vector-predicated integer arithmetic. It is subpatch #1 of the [integer slice](https://reviews.llvm.org/D57504#1732277) of [LLVM-VP](https://reviews.llvm.org/D57504). LLVM-VP is a larger effort to bring native vector predication to LLVM. Reviewed By: andrew.w.kaylor Differential Revision: https://reviews.llvm.org/D69891

…address" This reverts commit 6905394. The changed test is failing on Debian/x86_64, possibly because lldb is subtracting an offset from the DW_AT_call_pc address used for the artificial frame: http://lab.llvm.org:8011/builders/lldb-x86_64-debian/builds/7171/steps/test/logs/stdio /home/worker/lldb-x86_64-debian/lldb-x86_64-debian/llvm-project/lldb/test/API/functionalities/tail_call_frames/unambiguous_sequence/main.cpp:6:17: error: CHECK-NEXT: expected string not found in input // CHECK-NEXT: frame #1: 0x{{[0-9a-f]+}} a.out`func3() at main.cpp:14:3 [opt] [artificial] ^ <stdin>:3:2: note: scanning from here frame #1: 0x0000000000401127 a.out`func3() at main.cpp:13:4 [opt] [artificial]

Summary: //reviews.llvm.org/D33035 added in 2017 basic support for intel-pt. I plan to improve it and use it to support reverse debugging. I fixed a couple of issues and now this plugin works again: 1. pythonlib needed to be linked against it for the SB framework. Linking was failing because of this 2. the decoding functionality was broken because it lacked handling for instruction events. It seems old versions of libipt, the actual decoding library, didn't require these, but modern version require it (you can read more here https://github.com/intel/libipt/blob/master/doc/howto_libipt.md). These events signal overflows of the internal PT buffer in the CPU, enable/disable events of tracing, async cpu events, interrupts, etc. I ended up refactoring a little bit the code to reduce code duplication. In another diff I'll implement some basic tests. This is a simple execution of the library: (lldb) target create "/data/users/wallace/rr-project/a.out" Current executable set to '/data/users/wallace/rr-project/a.out' (x86_64). (lldb) plugin load liblldbIntelFeatures.so (lldb) b main Breakpoint 1: where = a.out`main + 8 at test.cpp:10, address = 0x00000000004007fa (lldb) b test.cpp:14 Breakpoint 2: where = a.out`main + 50 at test.cpp:14, address = 0x0000000000400824 (lldb) r Process 902754 stopped * thread #1, name = 'a.out', stop reason = breakpoint 1.1 frame #0: 0x00000000004007fa a.out`main at test.cpp:10 7 } 8 9 int main() { -> 10 int z = 0; 11 for(int i = 0; i < 10000; i++) 12 z += fun(z); 13 Process 902754 launched: '/data/users/wallace/rr-project/a.out' (x86_64) (lldb) processor-trace start all (lldb) c Process 902754 resuming Process 902754 stopped * thread #1, name = 'a.out', stop reason = breakpoint 2.1 frame #0: 0x0000000000400824 a.out`main at test.cpp:14 11 for(int i = 0; i < 10000; i++) 12 z += fun(z); 13 -> 14 cout << z<< endl; 15 return 0; 16 } (lldb) processor-trace show-instr-log thread #1: tid=902754 0x7ffff72299b9 <+9>: addq $0x8, %rsp 0x7ffff72299bd <+13>: retq 0x4007ed <+16>: addl $0x1, %eax 0x4007f0 <+19>: leave 0x4007f1 <+20>: retq 0x400814 <+34>: addl %eax, -0x4(%rbp) 0x400817 <+37>: addl $0x1, -0x8(%rbp) 0x40081b <+41>: cmpl $0x270f, -0x8(%rbp) ; imm = 0x270F 0x400822 <+48>: jle 0x40080a ; <+24> at test.cpp:12 0x400822 <+48>: jle 0x40080a ; <+24> at test.cpp:12 ``` Subscribers: mgorny, lldb-commits Tags: #lldb Differential Revision: https://reviews.llvm.org/D76872

Saves only 36 includes of ASTContext.h and related headers. There are two deps on ASTContext.h: - C++ method overrides iterator types (TinyPtrVector) - getting LangOptions For #1, duplicate the iterator type, which is TinyPtrVector<>::const_iterator. For #2, add an out-of-line accessor to get the language options. Getting the ASTContext from a Decl is already an out of line method that loops over the parent DeclContexts, so if it is ever performance critical, the proper fix is to pass the context (or LangOpts) into the predicate in question. Other changes are just header fixups.

Summary: Previously `AtosSymbolizer` would set the PID to examine in the constructor which is called early on during sanitizer init. This can lead to incorrect behaviour in the case of a fork() because if the symbolizer is launched in the child it will be told examine the parent process rather than the child. To fix this the PID is determined just before the symbolizer is launched. A test case is included that triggers the buggy behaviour that existed prior to this patch. The test observes the PID that `atos` was called on. It also examines the symbolized stacktrace. Prior to this patch `atos` failed to symbolize the stacktrace giving output that looked like... ``` #0 0x100fc3bb5 in __sanitizer_print_stack_trace asan_stack.cpp:86 #1 0x10490dd36 in PrintStack+0x56 (/path/to/print-stack-trace-in-code-loaded-after-fork.cpp.tmp_shared_lib.dylib:x86_64+0xd36) #2 0x100f6f986 in main+0x4a6 (/path/to/print-stack-trace-in-code-loaded-after-fork.cpp.tmp_loader:x86_64+0x100001986) #3 0x7fff714f1cc8 in start+0x0 (/usr/lib/system/libdyld.dylib:x86_64+0x1acc8) ``` After this patch stackframes `#1` and `#2` are fully symbolized. This patch is also a pre-requisite refactor for rdar://problem/58789439. Reviewers: kubamracek, yln Subscribers: #sanitizers, llvm-commits Tags: #sanitizers Differential Revision: https://reviews.llvm.org/D77623

Summary: crash stack: ``` lang: tools/clang/include/clang/AST/AttrImpl.inc:1490: unsigned int clang::AlignedAttr::getAlignment(clang::ASTContext &) const: Assertion `!isAlignmentDependent()' failed. PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace, preprocessed source, and associated run script. Stack dump: 0. Program arguments: ./bin/clang -cc1 -std=c++1y -ast-dump -frecovery-ast -fcxx-exceptions /tmp/t4.cpp 1. /tmp/t4.cpp:3:31: current parser token ';' #0 0x0000000002530cff llvm::sys::PrintStackTrace(llvm::raw_ostream&) llvm-project/llvm/lib/Support/Unix/Signals.inc:564:13 #1 0x000000000252ee30 llvm::sys::RunSignalHandlers() llvm-project/llvm/lib/Support/Signals.cpp:69:18 #2 0x000000000253126c SignalHandler(int) llvm-project/llvm/lib/Support/Unix/Signals.inc:396:3 #3 0x00007f86964d0520 __restore_rt (/lib/x86_64-linux-gnu/libpthread.so.0+0x13520) #4 0x00007f8695f9ff61 raise /build/glibc-oCLvUT/glibc-2.29/signal/../sysdeps/unix/sysv/linux/raise.c:51:1 #5 0x00007f8695f8b535 abort /build/glibc-oCLvUT/glibc-2.29/stdlib/abort.c:81:7 #6 0x00007f8695f8b40f _nl_load_domain /build/glibc-oCLvUT/glibc-2.29/intl/loadmsgcat.c:1177:9 #7 0x00007f8695f98b92 (/lib/x86_64-linux-gnu/libc.so.6+0x32b92) #8 0x0000000004503d9f llvm::APInt::getZExtValue() const llvm-project/llvm/include/llvm/ADT/APInt.h:1623:5 #9 0x0000000004503d9f clang::AlignedAttr::getAlignment(clang::ASTContext&) const llvm-project/build/tools/clang/include/clang/AST/AttrImpl.inc:1492:0 ``` Reviewers: sammccall Subscribers: cfe-commits Tags: #clang Differential Revision: https://reviews.llvm.org/D78085

This reverts commit 997f33c. Breaks check-mlir ******************** TEST 'MLIR :: IR/attribute.mlir' FAILED ******************** Script: -- : 'RUN: at line 1'; mlir-opt llvm-project/mlir/test/IR/attribute.mlir -split-input-file -verify-diagnostics | /FileCheck llvm-project/mlir/test/IR/attribute.mlir -- Exit Code: 1 Command Output (stderr): -- llvm-project/mlir/test/IR/attribute.mlir split at line #1:19:3: error: unexpected error: 'test.int_attrs' op requires attribute 'index_attr' "test.int_attrs"() { ^ llvm-project/mlir/test/IR/attribute.mlir split at line #120:6:3: error: unexpected error: 'test.int_attrs' op requires attribute 'index_attr' "test.int_attrs"() { ^ llvm-project/mlir/test/IR/attribute.mlir split at line #120:5:6: error: expected error "'si32_attr' failed to satisfy constraint: 32-bit signed integer attribute" was not produced // expected-error @+1 {{'si32_attr' failed to satisfy constraint: 32-bit signed integer attribute}} ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ llvm-project/mlir/test/IR/attribute.mlir split at line #133:5:3: error: unexpected error: 'test.int_attrs' op requires attribute 'index_attr' "test.int_attrs"() { ^ llvm-project/mlir/test/IR/attribute.mlir split at line #133:4:6: error: expected error "'ui32_attr' failed to satisfy constraint: 32-bit unsigned integer attribute" was not produced // expected-error @+1 {{'ui32_attr' failed to satisfy constraint: 32-bit unsigned integer attribute}} ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ llvm-project/mlir/test/IR/attribute.mlir:9:12: error: CHECK: expected string not found in input // CHECK: any_i32_attr = 5 : ui32 ^ <stdin>:3:1: note: scanning from here module { ^ <stdin>:21:28: note: possible intended match here "test.non_negative_int_attr"() {i32attr = 5 : i32, i64attr = 10 : i64} : () -> ()

Bitcode file alignment is only 32-bit so 64-bit offsets need special handling. /b/sanitizer-x86_64-linux-fast/build/llvm-project/clang/lib/Serialization/ASTReader.cpp:6327:28: runtime error: load of misaligned address 0x7fca2bcfe54c for type 'const uint64_t' (aka 'const unsigned long'), which requires 8 byte alignment 0x7fca2bcfe54c: note: pointer points here 00 00 00 00 5a a6 01 00 00 00 00 00 19 a7 01 00 00 00 00 00 48 a7 01 00 00 00 00 00 7d a7 01 00 ^ #0 0x3be2fe4 in clang::ASTReader::TypeCursorForIndex(unsigned int) /b/sanitizer-x86_64-linux-fast/build/llvm-project/clang/lib/Serialization/ASTReader.cpp:6327:28 #1 0x3be30a0 in clang::ASTReader::readTypeRecord(unsigned int) /b/sanitizer-x86_64-linux-fast/build/llvm-project/clang/lib/Serialization/ASTReader.cpp:6348:24 #2 0x3bd3d4a in clang::ASTReader::GetType(unsigned int) /b/sanitizer-x86_64-linux-fast/build/llvm-project/clang/lib/Serialization/ASTReader.cpp:6985:26 #3 0x3c5d9ae in clang::ASTDeclReader::Visit(clang::Decl*) /b/sanitizer-x86_64-linux-fast/build/llvm-project/clang/lib/Serialization/ASTReaderDecl.cpp:533:31 #4 0x3c91cac in clang::ASTReader::ReadDeclRecord(unsigned int) /b/sanitizer-x86_64-linux-fast/build/llvm-project/clang/lib/Serialization/ASTReaderDecl.cpp:4045:10 #5 0x3bd4fb1 in clang::ASTReader::GetDecl(unsigned int) /b/sanitizer-x86_64-linux-fast/build/llvm-project/clang/lib/Serialization/ASTReader.cpp:7352:5 #6 0x3bce2f9 in clang::ASTReader::ReadASTBlock(clang::serialization::ModuleFile&, unsigned int) /b/sanitizer-x86_64-linux-fast/build/llvm-project/clang/lib/Serialization/ASTReader.cpp:3625:22 #7 0x3bd6d75 in clang::ASTReader::ReadAST(llvm::StringRef, clang::serialization::ModuleKind, clang::SourceLocation, unsigned int, llvm::SmallVectorImpl<clang::ASTReader::ImportedSubmodule>*) /b/sanitizer-x86_64-linux-fast/build/llvm-project/clang/lib/Serialization/ASTReader.cpp:4230:32 #8 0x3a6b415 in clang::CompilerInstance::createPCHExternalASTSource(llvm::StringRef, llvm::StringRef, bool, bool, clang::Preprocessor&, clang::InMemoryModuleCache&, clang::ASTContext&, clang::PCHContainerReader const&, llvm::ArrayRef<std::shared_ptr<clang::ModuleFileExtension> >, llvm::ArrayRef<std::shared_ptr<clang::DependencyCollector> >, void*, bool, bool, bool) /b/sanitizer-x86_64-linux-fast/build/llvm-project/clang/lib/Frontend/CompilerInstance.cpp:539:19 #9 0x3a6b00e in clang::CompilerInstance::createPCHExternalASTSource(llvm::StringRef, bool, bool, void*, bool) /b/sanitizer-x86_64-linux-fast/build/llvm-project/clang/lib/Frontend/CompilerInstance.cpp:501:18 #10 0x3abac80 in clang::FrontendAction::BeginSourceFile(clang::CompilerInstance&, clang::FrontendInputFile const&) /b/sanitizer-x86_64-linux-fast/build/llvm-project/clang/lib/Frontend/FrontendAction.cpp:865:12 #11 0x3a6e61c in clang::CompilerInstance::ExecuteAction(clang::FrontendAction&) /b/sanitizer-x86_64-linux-fast/build/llvm-project/clang/lib/Frontend/CompilerInstance.cpp:972:13 #12 0x3ba74bf in clang::ExecuteCompilerInvocation(clang::CompilerInstance*) /b/sanitizer-x86_64-linux-fast/build/llvm-project/clang/lib/FrontendTool/ExecuteCompilerInvocation.cpp:282:25 #13 0xa3f753 in cc1_main(llvm::ArrayRef<char const*>, char const*, void*) /b/sanitizer-x86_64-linux-fast/build/llvm-project/clang/tools/driver/cc1_main.cpp:240:15 #14 0xa3a68a in ExecuteCC1Tool(llvm::SmallVectorImpl<char const*>&) /b/sanitizer-x86_64-linux-fast/build/llvm-project/clang/tools/driver/driver.cpp:330:12 #15 0xa37f31 in main /b/sanitizer-x86_64-linux-fast/build/llvm-project/clang/tools/driver/driver.cpp:407:12 #16 0x7fca2a7032e0 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x202e0) #17 0xa21029 in _start (/b/sanitizer-x86_64-linux-fast/build/llvm_build_ubsan/bin/clang-11+0xa21029) This reverts commit 30d5946.

Summary: The previous code tries to strip out parentheses and anything in between them. I'm guessing the idea here was to try to drop any listed arguments for the function being symbolized. Unfortunately this approach is broken in several ways. * Templated functions may contain parentheses. The existing approach messes up these names. * In C++ argument types are part of a function's signature for the purposes of overloading so removing them could be confusing. Fix this simply by not trying to adjust the function name that comes from `atos`. A test case is included. Without the change the test case produced output like: ``` WRITE of size 4 at 0x6060000001a0 thread T0 #0 0x10b96614d in IntWrapper<void >::operator=> const&) asan-symbolize-templated-cxx.cpp:10 #1 0x10b960b0e in void writeToA<IntWrapper<void > >>) asan-symbolize-templated-cxx.cpp:30 #2 0x10b96bf27 in decltype>)>> >)) std::__1::__invoke<void >), IntWrapper<void > >>), IntWrapper<void >&&) type_traits:4425 #3 0x10b96bdc1 in void std::__1::__invoke_void_return_wrapper<void>::__call<void >), IntWrapper<void > >>), IntWrapper<void >&&) __functional_base:348 #4 0x10b96bd71 in std::__1::__function::__alloc_func<void >), std::__1::allocator<void >)>, void >)>::operator>&&) functional:1533 #5 0x10b9684e2 in std::__1::__function::__func<void >), std::__1::allocator<void >)>, void >)>::operator>&&) functional:1707 #6 0x10b96cd7b in std::__1::__function::__value_func<void >)>::operator>&&) const functional:1860 #7 0x10b96cc17 in std::__1::function<void >)>::operator>) const functional:2419 #8 0x10b960ca6 in Foo<void >), IntWrapper<void > >::doCall>) asan-symbolize-templated-cxx.cpp:44 #9 0x10b96088b in main asan-symbolize-templated-cxx.cpp:54 #10 0x7fff6ffdfcc8 in start (in libdyld.dylib) + 0 ``` Note how the symbol names for the frames are messed up (e.g. #8, #1). With the patch the output looks like: ``` WRITE of size 4 at 0x6060000001a0 thread T0 #0 0x10005214d in IntWrapper<void (int)>::operator=(IntWrapper<void (int)> const&) asan-symbolize-templated-cxx.cpp:10 #1 0x10004cb0e in void writeToA<IntWrapper<void (int)> >(IntWrapper<void (int)>) asan-symbolize-templated-cxx.cpp:30 #2 0x100057f27 in decltype(std::__1::forward<void (*&)(IntWrapper<void (int)>)>(fp)(std::__1::forward<IntWrapper<void (int)> >(fp0))) std::__1::__invoke<void (*&)(IntWrapper<void (int)>), IntWrapper<void (int)> >(void (*&)(IntWrapper<void (int)>), IntWrapper<void (int)>&&) type_traits:4425 #3 0x100057dc1 in void std::__1::__invoke_void_return_wrapper<void>::__call<void (*&)(IntWrapper<void (int)>), IntWrapper<void (int)> >(void (*&)(IntWrapper<void (int)>), IntWrapper<void (int)>&&) __functional_base:348 #4 0x100057d71 in std::__1::__function::__alloc_func<void (*)(IntWrapper<void (int)>), std::__1::allocator<void (*)(IntWrapper<void (int)>)>, void (IntWrapper<void (int)>)>::operator()(IntWrapper<void (int)>&&) functional:1533 #5 0x1000544e2 in std::__1::__function::__func<void (*)(IntWrapper<void (int)>), std::__1::allocator<void (*)(IntWrapper<void (int)>)>, void (IntWrapper<void (int)>)>::operator()(IntWrapper<void (int)>&&) functional:1707 #6 0x100058d7b in std::__1::__function::__value_func<void (IntWrapper<void (int)>)>::operator()(IntWrapper<void (int)>&&) const functional:1860 #7 0x100058c17 in std::__1::function<void (IntWrapper<void (int)>)>::operator()(IntWrapper<void (int)>) const functional:2419 #8 0x10004cca6 in Foo<void (IntWrapper<void (int)>), IntWrapper<void (int)> >::doCall(IntWrapper<void (int)>) asan-symbolize-templated-cxx.cpp:44 #9 0x10004c88b in main asan-symbolize-templated-cxx.cpp:54 #10 0x7fff6ffdfcc8 in start (in libdyld.dylib) + 0 ``` rdar://problem/58887175 Reviewers: kubamracek, yln Subscribers: #sanitizers, llvm-commits Tags: #sanitizers Differential Revision: https://reviews.llvm.org/D79597

Summary: crash stack: ``` llvm-project/clang/lib/AST/ASTContext.cpp:2248: clang::TypeInfo clang::ASTContext::getTypeInfoImpl(const clang::Type *) const: Assertion `!A->getDeducedType().isNull() && "cannot request the size of an undeduced or dependent auto type"' failed. PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace, preprocessed source, and associated run script. Stack dump: #0 0x00000000025bb0bf llvm::sys::PrintStackTrace(llvm::raw_ostream&) llvm-project/llvm/lib/Support/Unix/Signals.inc:564:13 #1 0x00000000025b92b0 llvm::sys::RunSignalHandlers() llvm-project/llvm/lib/Support/Signals.cpp:69:18 #2 0x00000000025bb535 SignalHandler(int) llvm-project/llvm/lib/Support/Unix/Signals.inc:396:3 #3 0x00007f9ef9298110 __restore_rt (/lib/x86_64-linux-gnu/libpthread.so.0+0x14110) #4 0x00007f9ef8d72761 raise /build/glibc-M65Gwz/glibc-2.30/signal/../sysdeps/unix/sysv/linux/raise.c:51:1 #5 0x00007f9ef8d5c55b abort /build/glibc-M65Gwz/glibc-2.30/stdlib/abort.c:81:7 #6 0x00007f9ef8d5c42f get_sysdep_segment_value /build/glibc-M65Gwz/glibc-2.30/intl/loadmsgcat.c:509:8 #7 0x00007f9ef8d5c42f _nl_load_domain /build/glibc-M65Gwz/glibc-2.30/intl/loadmsgcat.c:970:34 #8 0x00007f9ef8d6b092 (/lib/x86_64-linux-gnu/libc.so.6+0x34092) #9 0x000000000458abe0 clang::ASTContext::getTypeInfoImpl(clang::Type const*) const llvm-project/clang/lib/AST/ASTContext.cpp:0:5 ``` Reviewers: sammccall Subscribers: cfe-commits Tags: #clang Differential Revision: https://reviews.llvm.org/D81384

Cherry-pick of patchset #1 https://reviews.llvm.org/D83249 Needed for 3.7, SWDEV-231101 Change-Id: I04ce9e8353526aa187ab854892f11d3a0f28c03b

@f

…ptions" Assume bundle can have more than one entry with the same name, but at least AlignmentFromAssumptionsPass::extractAlignmentInfo() uses getOperandBundle("align"), which internally assumes that it isn't the case, and happily crashes otherwise. Minimal reduced reproducer: run `opt -alignment-from-assumptions` on target datalayout = "e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-f80:128-n8:16:32:64-S128" target triple = "x86_64-unknown-linux-gnu" %0 = type { i64, %1*, i8*, i64, %2, i32, %3*, i8* } %1 = type opaque %2 = type { i8, i8, i16 } %3 = type { i32, i32, i32, i32 } ; Function Attrs: nounwind define i32 @f(%0* noalias nocapture readonly %arg, %0* noalias %arg1) local_unnamed_addr #0 { bb: call void @llvm.assume(i1 true) [ "align"(%0* %arg, i64 8), "align"(%0* %arg1, i64 8) ] ret i32 0 } ; Function Attrs: nounwind willreturn declare void @llvm.assume(i1) #1 attributes #0 = { nounwind "reciprocal-estimates"="none" } attributes #1 = { nounwind willreturn } This is what we'd have with -mllvm -enable-knowledge-retention This reverts commit c95ffad.

… Solaris/x86 A dozen 32-bit `AddressSanitizer` testcases FAIL on the latest beta of Solaris 11.4/x86, e.g. `AddressSanitizer-i386-sunos :: TestCases/null_deref.cpp` produces AddressSanitizer:DEADLYSIGNAL ================================================================= ==29274==ERROR: AddressSanitizer: stack-overflow on address 0x00000028 (pc 0x08135efd bp 0xfeffdfd8 sp 0x00000000 T0) #0 0x8135efd in NullDeref(int*) /vol/llvm/src/llvm-project/dist/compiler-rt/test/asan/TestCases/null_deref.cpp:15:10 #1 0x8135ea6 in main /vol/llvm/src/llvm-project/dist/compiler-rt/test/asan/TestCases/null_deref.cpp:21:3 #2 0x8084b85 in _start (null_deref.cpp.tmp+0x8084b85) SUMMARY: AddressSanitizer: stack-overflow /vol/llvm/src/llvm-project/dist/compiler-rt/test/asan/TestCases/null_deref.cpp:15:10 in NullDeref(int*) ==29274==ABORTING instead of the expected AddressSanitizer:DEADLYSIGNAL ================================================================= ==29276==ERROR: AddressSanitizer: SEGV on unknown address 0x00000028 (pc 0x08135f1f bp 0xfeffdf48 sp 0xfeffdf40 T0) ==29276==The signal is caused by a WRITE memory access. ==29276==Hint: address points to the zero page. #0 0x8135f1f in NullDeref(int*) /vol/llvm/src/llvm-project/local/compiler-rt/test/asan/TestCases/null_deref.cpp:15:10 #1 0x8135efa in main /vol/llvm/src/llvm-project/local/compiler-rt/test/asan/TestCases/null_deref.cpp:21:3 #2 0x8084be5 in _start (null_deref.cpp.tmp+0x8084be5) AddressSanitizer can not provide additional info. SUMMARY: AddressSanitizer: SEGV /vol/llvm/src/llvm-project/local/compiler-rt/test/asan/TestCases/null_deref.cpp:15:10 in NullDeref(int*) ==29276==ABORTING I managed to trace this to a change in `<sys/regset.h>`: previously the header would primarily define the short register indices (like `UESP`). While they are required by the i386 psABI, they are only required in `<ucontext.h>` and could previously leak into unsuspecting user code, polluting the namespace and requiring elaborate workarounds like that in `llvm/include/llvm/Support/Solaris/sys/regset.h`. The change fixed that by restricting the definition of the short forms appropriately, at the same time defining all `REG_` prefixed forms for compatiblity with other systems. This exposed a bug in `compiler-rt/lib/sanitizer_common/sanitizer_linux.cpp`, however: Previously, the index for the user stack pointer would be hardcoded if `REG_ESP` wasn't defined. Now with that definition present, it turned out that `REG_ESP` was the wrong index to use: the previous value 17 (and `REG_SP`) corresponds to `REG_UESP` instead. With that change, the failures are all gone. Tested on `amd-pc-solaris2.11`. Differential Revision: https://reviews.llvm.org/D83664

@s

SUMMARY: when we call memset, memcopy,memmove etc(this are llvm intrinsic function) in the c source code. the llvm will generate IR like call call void @llvm.memset.p0i8.i32(i8* align 4 bitcast (%struct.S* @s to i8*), i8 %1, i32 %2, i1 false) for c source code bash> cat test_memset.call struct S{ int a; int b; }; extern struct S s; void bar() { memset(&s, s.b, s.b); } like %struct.S = type { i32, i32 } @s = external global %struct.S, align 4 ; Function Attrs: noinline nounwind optnone define void @bar() #0 { entry: %0 = load i32, i32* getelementptr inbounds (%struct.S, %struct.S* @s, i32 0, i32 1), align 4 %1 = trunc i32 %0 to i8 %2 = load i32, i32* getelementptr inbounds (%struct.S, %struct.S* @s, i32 0, i32 1), align 4 call void @llvm.memset.p0i8.i32(i8* align 4 bitcast (%struct.S* @s to i8*), i8 %1, i32 %2, i1 false) ret void } declare void @llvm.memset.p0i8.i32(i8* nocapture writeonly, i8, i32, i1 immarg) #1 If we want to let the aix as assembly compile pass without -u it need to has following assembly code. .extern .memset (we do not output extern linkage for llvm instrinsic function. even if we output the extern linkage for llvm intrinsic function, we should not out .extern llvm.memset.p0i8.i32, instead of we should emit .extern memset) for other llvm buildin function floatdidf . even if we do not call these function floatdidf in the c source code(the generated IR also do not the call __floatdidf . the function call was generated in the LLVM optimized. the function is not in the functions list of Module, but we still need to emit extern .__floatdidf The solution for it as : We record all the lllvm intrinsic extern symbol when transformCallee(), and emit all these symbol in the AsmPrinter::doFinalization(Module &M) Reviewers: jasonliu, Sean Fertile, hubert.reinterpretcast, Differential Revision: https://reviews.llvm.org/D78929

…RM` was undefined after definition. `PP->getMacroInfo()` returns nullptr for undefined macro, which leads to null-dereference at `MI->tockens().back()`. Stack dump: ``` #0 0x000000000217d15a llvm::sys::PrintStackTrace(llvm::raw_ostream&) (/llvm-project/build/bin/clang-tidy+0x217d15a) #1 0x000000000217b17c llvm::sys::RunSignalHandlers() (/llvm-project/build/bin/clang-tidy+0x217b17c) #2 0x000000000217b2e3 SignalHandler(int) (/llvm-project/build/bin/clang-tidy+0x217b2e3) #3 0x00007f39be5b1390 __restore_rt (/lib/x86_64-linux-gnu/libpthread.so.0+0x11390) #4 0x0000000000593532 clang::tidy::bugprone::BadSignalToKillThreadCheck::check(clang::ast_matchers::MatchFinder::MatchResult const&) (/llvm-project/build/bin/clang-tidy+0x593532) ``` Reviewed By: hokein Differential Revision: https://reviews.llvm.org/D85401

…RM` is not a literal. If `SIGTERM` is not a literal (e.g. `#define SIGTERM ((unsigned)15)`) bugprone-bad-signal-to-kill-thread check crashes. Stack dump: ``` #0 0x000000000217d15a llvm::sys::PrintStackTrace(llvm::raw_ostream&) (/llvm-project/build/bin/clang-tidy+0x217d15a) #1 0x000000000217b17c llvm::sys::RunSignalHandlers() (/llvm-project/build/bin/clang-tidy+0x217b17c) #2 0x000000000217b2e3 SignalHandler(int) (/llvm-project/build/bin/clang-tidy+0x217b2e3) #3 0x00007f6a7efb1390 __restore_rt (/lib/x86_64-linux-gnu/libpthread.so.0+0x11390) #4 0x000000000212ac9b llvm::StringRef::getAsInteger(unsigned int, llvm::APInt&) const (/llvm-project/build/bin/clang-tidy+0x212ac9b) #5 0x0000000000593501 clang::tidy::bugprone::BadSignalToKillThreadCheck::check(clang::ast_matchers::MatchFinder::MatchResult const&) (/llvm-project/build/bin/clang-tidy+0x593501) ``` Reviewed By: hokein Differential Revision: https://reviews.llvm.org/D85398

… when `__STDC_WANT_LIB_EXT1__` was undefined after definition. PP->getMacroInfo() returns nullptr for undefined macro, so we need to check this return value before dereference. Stack dump: ``` #0 0x0000000002185e6a llvm::sys::PrintStackTrace(llvm::raw_ostream&) (/llvm-project/build/bin/clang-tidy+0x2185e6a) #1 0x0000000002183e8c llvm::sys::RunSignalHandlers() (/llvm-project/build/bin/clang-tidy+0x2183e8c) #2 0x0000000002183ff3 SignalHandler(int) (/llvm-project/build/bin/clang-tidy+0x2183ff3) #3 0x00007f37df9b1390 __restore_rt (/lib/x86_64-linux-gnu/libpthread.so.0+0x11390) #4 0x000000000052054e clang::tidy::bugprone::NotNullTerminatedResultCheck::check(clang::ast_matchers::MatchFinder::MatchResult const&) (/llvm-project/build/bin/clang-tidy+0x52054e) ``` Reviewed By: hokein Differential Revision: https://reviews.llvm.org/D85523

… when `__STDC_WANT_LIB_EXT1__` is not a literal. If `__STDC_WANT_LIB_EXT1__` is not a literal (e.g. `#define __STDC_WANT_LIB_EXT1__ ((unsigned)1)`) bugprone-not-null-terminated-result check crashes. Stack dump: ``` #0 0x0000000002185e6a llvm::sys::PrintStackTrace(llvm::raw_ostream&) (/llvm-project/build/bin/clang-tidy+0x2185e6a) #1 0x0000000002183e8c llvm::sys::RunSignalHandlers() (/llvm-project/build/bin/clang-tidy+0x2183e8c) #2 0x0000000002183ff3 SignalHandler(int) (/llvm-project/build/bin/clang-tidy+0x2183ff3) #3 0x00007f08d91b1390 __restore_rt (/lib/x86_64-linux-gnu/libpthread.so.0+0x11390) #4 0x00000000021338bb llvm::StringRef::getAsInteger(unsigned int, llvm::APInt&) const (/llvm-project/build/bin/clang-tidy+0x21338bb) #5 0x000000000052051c clang::tidy::bugprone::NotNullTerminatedResultCheck::check(clang::ast_matchers::MatchFinder::MatchResult const&) (/llvm-project/build/bin/clang-tidy+0x52051c) ``` Reviewed By: hokein Differential Revision: https://reviews.llvm.org/D85525

Cherry-pick of patchset #1 https://reviews.llvm.org/D83249 Needed for 3.7, SWDEV-231101 Change-Id: I04ce9e8353526aa187ab854892f11d3a0f28c03b

These tests use the statepoint-example builtin gc which expects address space #1 to the only non-integral address space. The fact the test used as=0 happened to work, but was caught by a downstream assert. (Literally years ago, I just happened to notice the XFAIL and fix it now.)

When `Target::GetEntryPointAddress()` calls `exe_module->GetObjectFile()->GetEntryPointAddress()`, and the returned `entry_addr` is valid, it can immediately be returned. However, just before that, an `llvm::Error` value has been setup, but in this case it is not consumed before returning, like is done further below in the function. In https://bugs.freebsd.org/248745 we got a bug report for this, where a very simple test case aborts and dumps core: ``` * thread #1, name = 'testcase', stop reason = breakpoint 1.1 frame #0: 0x00000000002018d4 testcase`main(argc=1, argv=0x00007fffffffea18) at testcase.c:3:5 1 int main(int argc, char *argv[]) 2 { -> 3 return 0; 4 } (lldb) p argc Program aborted due to an unhandled Error: Error value was Success. (Note: Success values must still be checked prior to being destroyed). Thread 1 received signal SIGABRT, Aborted. thr_kill () at thr_kill.S:3 3 thr_kill.S: No such file or directory. (gdb) bt #0 thr_kill () at thr_kill.S:3 #1 0x00000008049a0004 in __raise (s=6) at /usr/src/lib/libc/gen/raise.c:52 #2 0x0000000804916229 in abort () at /usr/src/lib/libc/stdlib/abort.c:67 #3 0x000000000451b5f5 in fatalUncheckedError () at /usr/src/contrib/llvm-project/llvm/lib/Support/Error.cpp:112 #4 0x00000000019cf008 in GetEntryPointAddress () at /usr/src/contrib/llvm-project/llvm/include/llvm/Support/Error.h:267 #5 0x0000000001bccbd8 in ConstructorSetup () at /usr/src/contrib/llvm-project/lldb/source/Target/ThreadPlanCallFunction.cpp:67 #6 0x0000000001bcd2c0 in ThreadPlanCallFunction () at /usr/src/contrib/llvm-project/lldb/source/Target/ThreadPlanCallFunction.cpp:114 #7 0x00000000020076d4 in InferiorCallMmap () at /usr/src/contrib/llvm-project/lldb/source/Plugins/Process/Utility/InferiorCallPOSIX.cpp:97 #8 0x0000000001f4be33 in DoAllocateMemory () at /usr/src/contrib/llvm-project/lldb/source/Plugins/Process/FreeBSD/ProcessFreeBSD.cpp:604 #9 0x0000000001fe51b9 in AllocatePage () at /usr/src/contrib/llvm-project/lldb/source/Target/Memory.cpp:347 #10 0x0000000001fe5385 in AllocateMemory () at /usr/src/contrib/llvm-project/lldb/source/Target/Memory.cpp:383 #11 0x0000000001974da2 in AllocateMemory () at /usr/src/contrib/llvm-project/lldb/source/Target/Process.cpp:2301 #12 CanJIT () at /usr/src/contrib/llvm-project/lldb/source/Target/Process.cpp:2331 #13 0x0000000001a1bf3d in Evaluate () at /usr/src/contrib/llvm-project/lldb/source/Expression/UserExpression.cpp:190 #14 0x00000000019ce7a2 in EvaluateExpression () at /usr/src/contrib/llvm-project/lldb/source/Target/Target.cpp:2372 #15 0x0000000001ad784c in EvaluateExpression () at /usr/src/contrib/llvm-project/lldb/source/Commands/CommandObjectExpression.cpp:414 #16 0x0000000001ad86ae in DoExecute () at /usr/src/contrib/llvm-project/lldb/source/Commands/CommandObjectExpression.cpp:646 #17 0x0000000001a5e3ed in Execute () at /usr/src/contrib/llvm-project/lldb/source/Interpreter/CommandObject.cpp:1003 #18 0x0000000001a6c4a3 in HandleCommand () at /usr/src/contrib/llvm-project/lldb/source/Interpreter/CommandInterpreter.cpp:1762 #19 0x0000000001a6f98c in IOHandlerInputComplete () at /usr/src/contrib/llvm-project/lldb/source/Interpreter/CommandInterpreter.cpp:2760 #20 0x0000000001a90b08 in Run () at /usr/src/contrib/llvm-project/lldb/source/Core/IOHandler.cpp:548 #21 0x00000000019a6c6a in ExecuteIOHandlers () at /usr/src/contrib/llvm-project/lldb/source/Core/Debugger.cpp:903 #22 0x0000000001a70337 in RunCommandInterpreter () at /usr/src/contrib/llvm-project/lldb/source/Interpreter/CommandInterpreter.cpp:2946 #23 0x0000000001d9d812 in RunCommandInterpreter () at /usr/src/contrib/llvm-project/lldb/source/API/SBDebugger.cpp:1169 #24 0x0000000001918be8 in MainLoop () at /usr/src/contrib/llvm-project/lldb/tools/driver/Driver.cpp:675 #25 0x000000000191a114 in main () at /usr/src/contrib/llvm-project/lldb/tools/driver/Driver.cpp:890``` Fix the incorrect error catch by only instantiating an `Error` object if it is necessary. Reviewed By: JDevlieghere Differential Revision: https://reviews.llvm.org/D86355

I was having a lot of trouble parsing the messages. In particular, the messages like: ``` <stdin>:3:8: error: 'scf.if' op along control flow edge from Region #0 to scf.if source #1 type '!npcomprt.tensor' should match input #1 type 'tensor<?xindex>' ``` In particular, one thing that kept catching me was parsing the "to scf.if source #1 type" as one thing, but really it is "to parent results: source type #1". Differential Revision: https://reviews.llvm.org/D87334

`TestCases/log-path_test.cpp` currently `FAIL`s on Solaris: $ env ASAN_OPTIONS=log_path=`for((i=0;i<10000;i++)); do echo -n $i; done` ./log-path_test.cpp.tmp ==5031==ERROR: Path is too long: 01234567... Segmentation Fault (core dumped) The `SEGV` happens here: Thread 2 received signal SIGSEGV, Segmentation fault. [Switching to Thread 1 (LWP 1)] 0x00000000 in ?? () (gdb) where #0 0x00000000 in ?? () #1 0x080a1e63 in __interceptor__exit (status=1) at /vol/gcc/src/llvm/llvm/local/projects/compiler-rt/lib/asan/../sanitizer_common/sanitizer_common_interceptors.inc:3808 #2 0x08135ea8 in __sanitizer::internal__exit (exitcode=1) at /vol/gcc/src/llvm/llvm/local/projects/compiler-rt/lib/sanitizer_common/sanitizer_solaris.cc:139 when `__interceptor__exit` tries to call `__interception::real__exit` which is `NULL` at this point because the interceptors haven't been initialized yet. Ultimately, the problem lies elsewhere, however: `internal__exit` in `sanitizer_solaris.cpp` calls `_exit` itself since there doesn't exit a non-intercepted version in `libc`. Using the `syscall` interface instead isn't usually an option on Solaris because that interface isn't stable. However, in the case of `SYS_exit` it can be used nonetheless: `SYS_exit` has remained unchanged since at least Solaris 2.5.1 in 1996, and this is what this patch does. Tested on `amd64-pc-solaris2.11`. Differential Revision: https://reviews.llvm.org/D88404

Matt's change to the register allocator in 89baeae changed where we end up after the `finish`. Before we'd end up on line 4. * thread #1, queue = 'com.apple.main-thread', stop reason = step out Return value: (int) $0 = 1 frame #0: 0x0000000100003f7d a.out`main(argc=1, argv=0x00007ffeefbff630) at main.c:4:3 1 extern int func(); 2 3 int main(int argc, char **argv) { -> 4 func(); // Break here 5 func(); // Second 6 return 0; 7 } Now, we end up on line 5. * thread #1, queue = 'com.apple.main-thread', stop reason = step out Return value: (int) $0 = 1 frame #0: 0x0000000100003f8d a.out`main(argc=1, argv=0x00007ffeefbff630) at main.c:5:3 2 3 int main(int argc, char **argv) { 4 func(); // Break here -> 5 func(); // Second 6 return 0; 7 } Given that this is not expected stable to be stable I've made the test a bit more lenient to accept both scenarios.

This can fix an asan failure like below. ==15856==ERROR: AddressSanitizer: use-after-poison on address ... READ of size 8 at 0x6210001a3cb0 thread T0 #0 llvm::MachineInstr::getParent() #1 llvm::LiveVariables::VarInfo::findKill() #2 TwoAddressInstructionPass::rescheduleMIBelowKill() #3 TwoAddressInstructionPass::tryInstructionTransform() #4 TwoAddressInstructionPass::runOnMachineFunction() We need to update the Kills if we replace instructions. The Kills may be later accessed within TwoAddressInstruction pass. Differential Revision: https://reviews.llvm.org/D89092

As mentioned in the comment inside the code, the Intel documentation states that the internal CPU buffer is flushed out to RAM only when tracing is disabled. Otherwise, the buffer on RAM might be stale. This diff disables tracing when the trace buffer is going to be read. This is a quite safe operation, as the reading is done when the inferior is paused at a breakpoint, so we are not losing any packets because there's no code being executed. After the reading is finished, tracing is enabled back. It's a bit hard to write a test for this now, but Greg Clayton and I will refactor the PT support and writing tests for it will be easier. However I tested it manually by doing a script that automates the following flow ``` (lldb) b main Breakpoint 1: where = a.out`main + 15 at main.cpp:4:7, address = 0x000000000040050f (lldb) r Process 3078226 stopped * thread #1, name = 'a.out', stop reason = breakpoint 1.1 frame #0: 0x000000000040050f a.out`main at main.cpp:4:7 (lldb) processor-trace start (lldb) b 5 Breakpoint 2: where = a.out`main + 22 at main.cpp:5:12, address = 0x0000000000400516 (lldb) c Process 3078226 resuming Process 3078226 stopped * thread #1, name = 'a.out', stop reason = breakpoint 2.1 frame #0: 0x0000000000400516 a.out`main at main.cpp:5:12 (lldb) processor-trace show-instr-log thread #1: tid=3078226 0x40050f <+15>: movl $0x0, -0x8(%rbp) >>> Before, some runs of the script up to this point lead to empty traces (lldb) b 6 Breakpoint 3: where = a.out`main + 42 at main.cpp:6:14, address = 0x000000000040052a (lldb) c Process 3092991 resuming Process 3092991 stopped * thread #1, name = 'a.out', stop reason = breakpoint 3.1 frame #0: 0x000000000040052a a.out`main at main.cpp:6:14 (lldb) processor-trace show-instr-log thread #1: tid=3092991 0x40050f <+15>: movl $0x0, -0x8(%rbp) 0x400516 <+22>: movl $0x0, -0xc(%rbp) 0x40051d <+29>: cmpl $0x2710, -0xc(%rbp) ; imm = 0x2710 0x400524 <+36>: jge 0x400546 ; <+70> at main.cpp 0x400524 <+36>: jge 0x400546 ; <+70> at main.cpp >>> The trace was re-enabled correctly and includes the instruction of the first reading. ``` Those instructions correspond to these lines ``` 3 int main() { 4 int z = 0; 5 for (int i = 0; i < 10000; i++) { 6 z += fun(z) ... ``` Differential Revision: https://reviews.llvm.org/D85241

ADDI often has a frameindex in operand 1, but consumers of this interface, such as MachineSink, tend to call getReg() on the Destination and Source operands, leading to the following crash when building FreeBSD after this implementation was added in 8cf6778: ``` clang: llvm/include/llvm/CodeGen/MachineOperand.h:359: llvm::Register llvm::MachineOperand::getReg() const: Assertion `isReg() && "This is not a register operand!"' failed. PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace, preprocessed source, and associated run script. Stack dump: #0 0x00007f4286f9b4d0 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) llvm/lib/Support/Unix/Signals.inc:563:0 #1 0x00007f4286f9b587 PrintStackTraceSignalHandler(void*) llvm/lib/Support/Unix/Signals.inc:630:0 #2 0x00007f4286f9926b llvm::sys::RunSignalHandlers() llvm/lib/Support/Signals.cpp:71:0 #3 0x00007f4286f9ae52 SignalHandler(int) llvm/lib/Support/Unix/Signals.inc:405:0 #4 0x00007f428646ffd0 (/lib/x86_64-linux-gnu/libc.so.6+0x3efd0) #5 0x00007f428646ff47 raise /build/glibc-2ORdQG/glibc-2.27/signal/../sysdeps/unix/sysv/linux/raise.c:51:0 #6 0x00007f42864718b1 abort /build/glibc-2ORdQG/glibc-2.27/stdlib/abort.c:81:0 #7 0x00007f428646142a __assert_fail_base /build/glibc-2ORdQG/glibc-2.27/assert/assert.c:89:0 #8 0x00007f42864614a2 (/lib/x86_64-linux-gnu/libc.so.6+0x304a2) #9 0x00007f428d4078e2 llvm::MachineOperand::getReg() const llvm/include/llvm/CodeGen/MachineOperand.h:359:0 #10 0x00007f428d8260e7 attemptDebugCopyProp(llvm::MachineInstr&, llvm::MachineInstr&) llvm/lib/CodeGen/MachineSink.cpp:862:0 #11 0x00007f428d826442 performSink(llvm::MachineInstr&, llvm::MachineBasicBlock&, llvm::MachineInstrBundleIterator<llvm::MachineInstr, false>, llvm::SmallVectorImpl<llvm::MachineInstr*>&) llvm/lib/CodeGen/MachineSink.cpp:918:0 #12 0x00007f428d826e27 (anonymous namespace)::MachineSinking::SinkInstruction(llvm::MachineInstr&, bool&, std::map<llvm::MachineBasicBlock*, llvm::SmallVector<llvm::MachineBasicBlock*, 4u>, std::less<llvm::MachineBasicBlock*>, std::allocator<std::pair<llvm::MachineBasicBlock* const, llvm::SmallVector<llvm::MachineBasicBlock*, 4u> > > >&) llvm/lib/CodeGen/MachineSink.cpp:1073:0 #13 0x00007f428d824a2c (anonymous namespace)::MachineSinking::ProcessBlock(llvm::MachineBasicBlock&) llvm/lib/CodeGen/MachineSink.cpp:410:0 #14 0x00007f428d824513 (anonymous namespace)::MachineSinking::runOnMachineFunction(llvm::MachineFunction&) llvm/lib/CodeGen/MachineSink.cpp:340:0 ``` Thus, check that operand 1 is also a register in the condition. Reviewed By: arichardson, luismarques Differential Revision: https://reviews.llvm.org/D89090

we already check for `platform_sp` not null in one line below. existing code ``` if (platform_sp) { Status error; if (platform_sp) { ... ... } } ``` `platform_sp` null check is redundant and error variable is unused. ### TEST PLAN manual test ``` satyajanga@devvm21837:toolchain $ ./bin/lldb LLDB logging initialized. Logs stored in: /tmp (lldb) platform select host Platform: host Triple: x86_64-*-linux-gnu OS Version: 6.9.0 (6.9.0-0_fbk5_hardened_1_gf368ae920c1a) Hostname: 127.0.0.1 WorkingDir: /home/satyajanga/llvm-sand/build/Debug/fbcode-x86_64/toolchain Kernel: #1 SMP Tue Feb 11 07:24:41 PST 2025 Kernel: Linux Release: 6.9.0-0_fbk5_hardened_1_gf368ae920c1a Version: #1 SMP Tue Feb 11 07:24:41 PST 2025 (lldb) platform process list 144 matching processes were found on "host" PID PARENT USER TRIPLE NAME ====== ====== ========== ============================== ============================ 130461 874915 satyajanga x86_64-*-linux-gnu sushd 135505 874915 satyajanga x86_64-*-linux-gnu hg.real 817146 874915 satyajanga x86_64-*-linux-gnu vscode-thrift 874915 1 satyajanga 874947 874915 satyajanga ``` and running the existing tests ``` satyajanga@devvm21837:toolchain $ ./bin/llvm-lit -v ~/llvm-sand/external/llvm-project/lldb/test/API/commands/platform/ -- Testing: 9 tests, 9 workers -- PASS: lldb-api :: commands/platform/file/read/TestPlatformFileRead.py (1 of 9) PASS: lldb-api :: commands/platform/file/close/TestPlatformFileClose.py (2 of 9) UNSUPPORTED: lldb-api :: commands/platform/sdk/TestPlatformSDK.py (3 of 9) PASS: lldb-api :: commands/platform/basic/TestPlatformPython.py (4 of 9) PASS: lldb-api :: commands/platform/basic/TestPlatformCommand.py (5 of 9) PASS: lldb-api :: commands/platform/connect/TestPlatformConnect.py (6 of 9) PASS: lldb-api :: commands/platform/process/launch/TestPlatformProcessLaunch.py (7 of 9) PASS: lldb-api :: commands/platform/launchgdbserver/TestPlatformLaunchGDBServer.py (8 of 9) PASS: lldb-api :: commands/platform/process/list/TestProcessList.py (9 of 9) Testing Time: 13.48s Total Discovered Tests: 9 Unsupported: 1 (11.11%) Passed : 8 (88.89%) satyajanga@devvm21837:toolchain $ ```

llvm#138091) Check this error for more context (https://github.com/compiler-research/CppInterOp/actions/runs/14749797085/job/41407625681?pr=491#step:10:531) This fails with ``` * thread #1, name = 'CppInterOpTests', stop reason = signal SIGSEGV: address not mapped to object (fault address: 0x55500356d6d3) * frame #0: 0x00007fffee41cfe3 libclangCppInterOp.so.21.0gitclang::PragmaNamespace::~PragmaNamespace() + 99 frame #1: 0x00007fffee435666 libclangCppInterOp.so.21.0gitclang::Preprocessor::~Preprocessor() + 3830 frame #2: 0x00007fffee20917a libclangCppInterOp.so.21.0gitstd::_Sp_counted_base<(__gnu_cxx::_Lock_policy)2>::_M_release() + 58 frame #3: 0x00007fffee224796 libclangCppInterOp.so.21.0gitclang::CompilerInstance::~CompilerInstance() + 838 frame #4: 0x00007fffee22494d libclangCppInterOp.so.21.0gitclang::CompilerInstance::~CompilerInstance() + 13 frame #5: 0x00007fffed95ec62 libclangCppInterOp.so.21.0gitclang::IncrementalCUDADeviceParser::~IncrementalCUDADeviceParser() + 98 frame #6: 0x00007fffed9551b6 libclangCppInterOp.so.21.0gitclang::Interpreter::~Interpreter() + 102 frame #7: 0x00007fffed95598d libclangCppInterOp.so.21.0gitclang::Interpreter::~Interpreter() + 13 frame #8: 0x00007fffed9181e7 libclangCppInterOp.so.21.0gitcompat::createClangInterpreter(std::vector<char const*, std::allocator<char const*>>&) + 2919 ``` Problem : 1) The destructor currently handles no clearance for the DeviceParser and the DeviceAct. We currently only have this https://github.com/llvm/llvm-project/blob/976493822443c52a71ed3c67aaca9a555b20c55d/clang/lib/Interpreter/Interpreter.cpp#L416-L419 2) The ownership for DeviceCI currently is present in IncrementalCudaDeviceParser. But this should be similar to how the combination for hostCI, hostAction and hostParser are managed by the Interpreter. As on master the DeviceAct and DeviceParser are managed by the Interpreter but not DeviceCI. This is problematic because : IncrementalParser holds a Sema& which points into the DeviceCI. On master, DeviceCI is destroyed before the base class ~IncrementalParser() runs, causing Parser::reset() to access a dangling Sema (and as Sema holds a reference to Preprocessor which owns PragmaNamespace) we see this ``` * frame #0: 0x00007fffee41cfe3 libclangCppInterOp.so.21.0gitclang::PragmaNamespace::~PragmaNamespace() + 99 frame #1: 0x00007fffee435666 libclangCppInterOp.so.21.0gitclang::Preprocessor::~Preprocessor() + 3830 ```

When running the `openmp` testsuite on Solaris/amd64, many tests `FAIL` like ``` # | OMP: Error #11: Stack overflow detected for OpenMP thread #1 ``` In a `Debug` build, I also get ``` # | Assertion failure at kmp_runtime.cpp(203): __kmp_gtid_get_specific() < 0 || __kmp_gtid_get_specific() == i. ``` Further investigation shows that just setting `__kmp_gtid_mode` to 3 massively reduces the number of failures. Tested on `amd64-pc-solaris2.11` and `x86_64-pc-linux-gnu`.

Fix for: `Assertion failed: (false && "Architecture or OS not supported"), function CreateRegisterContextForFrame, file /usr/src/contrib/llvm-project/lldb/source/Plugins/Process/elf-core/ThreadElfCore.cpp, line 182. PLEASE submit a bug report to https://bugs.freebsd.org/submit/ and include the crash backtrace. #0 0x000000080cd857c8 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) /usr/src/contrib/llvm-project/llvm/lib/Support/Unix/Signals.inc:723:13 #1 0x000000080cd85ed4 /usr/src/contrib/llvm-project/llvm/lib/Support/Unix/Signals.inc:797:3 #2 0x000000080cd82ae8 llvm::sys::RunSignalHandlers() /usr/src/contrib/llvm-project/llvm/lib/Support/Signals.cpp:104:5 #3 0x000000080cd861f0 SignalHandler /usr/src/contrib/llvm-project/llvm/lib/Support/Unix/Signals.inc:403:3 #4 0x000000080f159644 handle_signal /usr/src/lib/libthr/thread/thr_sig.c:298:3 `

The mcmodel=tiny memory model is only valid on ARM targets. While trying this on X86 compiler throws an internal error along with stack dump. llvm#125641 This patch resolves the issue. Reduced test case: ``` #include <stdio.h> int main( void ) { printf( "Hello, World!\n" ); return 0; } ``` ``` 0. Program arguments: /opt/compiler-explorer/clang-trunk/bin/clang++ -gdwarf-4 -g -o /app/output.s -fno-verbose-asm -S --gcc-toolchain=/opt/compiler-explorer/gcc-snapshot -fcolor-diagnostics -fno-crash-diagnostics -mcmodel=tiny <source> 1. <eof> parser at end of file #0 0x0000000003b10218 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/opt/compiler-explorer/clang-trunk/bin/clang+++0x3b10218) #1 0x0000000003b0e35c llvm::sys::CleanupOnSignal(unsigned long) (/opt/compiler-explorer/clang-trunk/bin/clang+++0x3b0e35c) #2 0x0000000003a5dbc3 llvm::CrashRecoveryContext::HandleExit(int) (/opt/compiler-explorer/clang-trunk/bin/clang+++0x3a5dbc3) #3 0x0000000003b05cfe llvm::sys::Process::Exit(int, bool) (/opt/compiler-explorer/clang-trunk/bin/clang+++0x3b05cfe) #4 0x0000000000d4e3eb LLVMErrorHandler(void*, char const*, bool) cc1_main.cpp:0:0 #5 0x0000000003a67c93 llvm::report_fatal_error(llvm::Twine const&, bool) (/opt/compiler-explorer/clang-trunk/bin/clang+++0x3a67c93) #6 0x0000000003a67df8 (/opt/compiler-explorer/clang-trunk/bin/clang+++0x3a67df8) #7 0x0000000002549148 llvm::X86TargetMachine::X86TargetMachine(llvm::Target const&, llvm::Triple const&, llvm::StringRef, llvm::StringRef, llvm::TargetOptions const&, std::optional<llvm::Reloc::Model>, std::optional<llvm::CodeModel::Model>, llvm::CodeGenOptLevel, bool) (/opt/compiler-explorer/clang-trunk/bin/clang+++0x2549148) #8 0x00000000025491fc llvm::RegisterTargetMachine<llvm::X86TargetMachine>::Allocator(llvm::Target const&, llvm::Triple const&, llvm::StringRef, llvm::StringRef, llvm::TargetOptions const&, std::optional<llvm::Reloc::Model>, std::optional<llvm::CodeModel::Model>, llvm::CodeGenOptLevel, bool) (/opt/compiler-explorer/clang-trunk/bin/clang+++0x25491fc) #9 0x0000000003db74cc clang::emitBackendOutput(clang::CompilerInstance&, clang::CodeGenOptions&, llvm::StringRef, llvm::Module*, clang::BackendAction, llvm::IntrusiveRefCntPtr<llvm::vfs::FileSystem>, std::unique_ptr<llvm::raw_pwrite_stream, std::default_delete<llvm::raw_pwrite_stream>>, clang::BackendConsumer*) (/opt/compiler-explorer/clang-trunk/bin/clang+++0x3db74cc) #10 0x0000000004460d95 clang::BackendConsumer::HandleTranslationUnit(clang::ASTContext&) (/opt/compiler-explorer/clang-trunk/bin/clang+++0x4460d95) #11 0x00000000060005ec clang::ParseAST(clang::Sema&, bool, bool) (/opt/compiler-explorer/clang-trunk/bin/clang+++0x60005ec) #12 0x00000000044614b5 clang::CodeGenAction::ExecuteAction() (/opt/compiler-explorer/clang-trunk/bin/clang+++0x44614b5) #13 0x0000000004737121 clang::FrontendAction::Execute() (/opt/compiler-explorer/clang-trunk/bin/clang+++0x4737121) #14 0x00000000046b777b clang::CompilerInstance::ExecuteAction(clang::FrontendAction&) (/opt/compiler-explorer/clang-trunk/bin/clang+++0x46b777b) #15 0x00000000048229e3 clang::ExecuteCompilerInvocation(clang::CompilerInstance*) (/opt/compiler-explorer/clang-trunk/bin/clang+++0x48229e3) #16 0x0000000000d50621 cc1_main(llvm::ArrayRef<char const*>, char const*, void*) (/opt/compiler-explorer/clang-trunk/bin/clang+++0xd50621) #17 0x0000000000d48e2d ExecuteCC1Tool(llvm::SmallVectorImpl<char const*>&, llvm::ToolContext const&) driver.cpp:0:0 #18 0x00000000044acc99 void llvm::function_ref<void ()>::callback_fn<clang::driver::CC1Command::Execute(llvm::ArrayRef<std::optional<llvm::StringRef>>, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>*, bool*) const::'lambda'()>(long) Job.cpp:0:0 #19 0x0000000003a5dac3 llvm::CrashRecoveryContext::RunSafely(llvm::function_ref<void ()>) (/opt/compiler-explorer/clang-trunk/bin/clang+++0x3a5dac3) #20 0x00000000044aceb9 clang::driver::CC1Command::Execute(llvm::ArrayRef<std::optional<llvm::StringRef>>, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>*, bool*) const (.part.0) Job.cpp:0:0 #21 0x00000000044710dd clang::driver::Compilation::ExecuteCommand(clang::driver::Command const&, clang::driver::Command const*&, bool) const (/opt/compiler-explorer/clang-trunk/bin/clang+++0x44710dd) #22 0x0000000004472071 clang::driver::Compilation::ExecuteJobs(clang::driver::JobList const&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&, bool) const (/opt/compiler-explorer/clang-trunk/bin/clang+++0x4472071) #23 0x000000000447c3fc clang::driver::Driver::ExecuteCompilation(clang::driver::Compilation&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&) (/opt/compiler-explorer/clang-trunk/bin/clang+++0x447c3fc) #24 0x0000000000d4d2b1 clang_main(int, char**, llvm::ToolContext const&) (/opt/compiler-explorer/clang-trunk/bin/clang+++0xd4d2b1) #25 0x0000000000c12464 main (/opt/compiler-explorer/clang-trunk/bin/clang+++0xc12464) #26 0x00007ae43b029d90 (/lib/x86_64-linux-gnu/libc.so.6+0x29d90) #27 0x00007ae43b029e40 __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x29e40) #28 0x0000000000d488c5 _start (/opt/compiler-explorer/clang-trunk/bin/clang+++0xd488c5) ``` --------- Co-authored-by: Shashwathi N <[email protected]>

… `getForwardSlice` matchers (llvm#115670) Improve mlir-query tool by implementing `getBackwardSlice` and `getForwardSlice` matchers. As an addition `SetQuery` also needed to be added to enable custom configuration for each query. e.g: `inclusive`, `omitUsesFromAbove`, `omitBlockArguments`. Note: backwardSlice and forwardSlice algoritms are the same as the ones in `mlir/lib/Analysis/SliceAnalysis.cpp` Example of current matcher. The query was made to the file: `mlir/test/mlir-query/complex-test.mlir` ```mlir ./mlir-query /home/dbudii/personal/llvm-project/mlir/test/mlir-query/complex-test.mlir -c "match getDefinitions(hasOpName(\"arith.add f\"),2)" Match #1: /home/dbudii/personal/llvm-project/mlir/test/mlir-query/complex-test.mlir:5:8: %0 = linalg.generic {indexing_maps = [#map, #map], iterator_types = ["parallel", "parallel"]} ins(%arg0 : tensor<5x5xf32>) outs(%arg1 : tensor<5x5xf32>) { ^ /home/dbudii/personal/llvm-project/mlir/test/mlir-query/complex-test.mlir:7:10: note: "root" binds here %2 = arith.addf %in, %in : f32 ^ Match #2: /home/dbudii/personal/llvm-project/mlir/test/mlir-query/complex-test.mlir:10:16: %collapsed = tensor.collapse_shape %0 [[0, 1]] : tensor<5x5xf32> into tensor<25xf32> ^ /home/dbudii/personal/llvm-project/mlir/test/mlir-query/complex-test.mlir:13:11: %c2 = arith.constant 2 : index ^ /home/dbudii/personal/llvm-project/mlir/test/mlir-query/complex-test.mlir:14:18: %extracted = tensor.extract %collapsed[%c2] : tensor<25xf32> ^ /home/dbudii/personal/llvm-project/mlir/test/mlir-query/complex-test.mlir:15:10: note: "root" binds here %2 = arith.addf %extracted, %extracted : f32 ^ 2 matches. ```

Fixes llvm#123300 What is seen ``` clang-repl> int x = 42; clang-repl> auto capture = [&]() { return x * 2; }; In file included from <<< inputs >>>:1: input_line_4:1:17: error: non-local lambda expression cannot have a capture-default 1 | auto capture = [&]() { return x * 2; }; | ^ zsh: segmentation fault clang-repl --Xcc="-v" (lldb) bt * thread #1, queue = 'com.apple.main-thread', stop reason = EXC_BAD_ACCESS (code=1, address=0x8) * frame #0: 0x0000000107b4f8b8 libclang-cpp.19.1.dylib`clang::IncrementalParser::CleanUpPTU(clang::PartialTranslationUnit&) + 988 frame #1: 0x0000000107b4f1b4 libclang-cpp.19.1.dylib`clang::IncrementalParser::ParseOrWrapTopLevelDecl() + 416 frame #2: 0x0000000107b4fb94 libclang-cpp.19.1.dylib`clang::IncrementalParser::Parse(llvm::StringRef) + 612 frame #3: 0x0000000107b52fec libclang-cpp.19.1.dylib`clang::Interpreter::ParseAndExecute(llvm::StringRef, clang::Value*) + 180 frame #4: 0x0000000100003498 clang-repl`main + 3560 frame #5: 0x000000018d39a0e0 dyld`start + 2360 ``` Though the error is justified, we shouldn't be interested in exiting through a segfault in such cases. The issue is that empty named decls weren't being taken care of resulting into this assert https://github.com/llvm/llvm-project/blob/c1a229252617ed58f943bf3f4698bd8204ee0f04/clang/include/clang/AST/DeclarationName.h#L503 Can also be seen when the example is attempted through xeus-cpp-lite. ![image](https://github.com/user-attachments/assets/9b0e6ead-138e-4b06-9ad9-fcb9f8d5bf6e)

# Symptom We have seen SIGSEGV like this: ``` * thread #1, name = 'lldb-server', stop reason = SIGSEGV frame #0: 0x00007f39e529c993 libc.so.6`__pthread_kill_internal(signo=11, threadid=<unavailable>) at pthread_kill.c:46:37 ... * frame #5: 0x000056027c94fe48 lldb-server`lldb_private::process_linux::GetPtraceScope() + 72 frame #6: 0x000056027c92f94f lldb-server`lldb_private::process_linux::NativeProcessLinux::Attach(int) + 1087 ... ``` See [full stack trace](https://pastebin.com/X0d6QhYj). This happens on Linux where LLDB doesn't have access to `/proc/sys/kernel/yama/ptrace_scope`. A similar error (an unchecked `Error`) can be reproduced by running the newly added unit test without the fix. See the "Test" section below. # Root cause `GetPtraceScope()` ([code](https://github.com/llvm/llvm-project/blob/328f40f408c218f25695ea42c844e43bef38660b/lldb/source/Plugins/Process/Linux/Procfs.cpp#L77)) has the following `if` statement: ``` llvm::Expected<int> lldb_private::process_linux::GetPtraceScope() { ErrorOr<std::unique_ptr<MemoryBuffer>> ptrace_scope_file = getProcFile("sys/kernel/yama/ptrace_scope"); if (!*ptrace_scope_file) return errorCodeToError(ptrace_scope_file.getError()); ... } ``` The intention of the `if` statement is to check whether the `ptrace_scope_file` is an `Error` or not, and return the error if it is. However, the `operator*` of `ErrorOr` returns the value that is stored (which is a `std::unique_ptr<MemoryBuffer>`), so what the `if` condition actually do is to check if the unique pointer is non-null. Note that the method `ErrorOr::getStorage()` ([called by](https://github.com/llvm/llvm-project/blob/328f40f408c218f25695ea42c844e43bef38660b/llvm/include/llvm/Support/ErrorOr.h#L162-L164) `ErrorOr::operator *`) **does** assert on whether or not `HasError` has been set (see [ErrorOr.h](https://github.com/llvm/llvm-project/blob/328f40f408c218f25695ea42c844e43bef38660b/llvm/include/llvm/Support/ErrorOr.h#L235-L243)). However, it seems this wasn't executed, probably because the LLDB was a release build. # Fix The fix is simply remove the `*` in the said `if` statement.

…142952) This was removed in llvm#135343 in favour of making it a format variable, which we do here. This follows the precedent of the `[opt]` and `[artificial]` markers. Before: ``` thread #1, queue = 'com.apple.main-thread', stop reason = breakpoint 1.2 * frame #0: 0x000000010000037c a.out`inlined1() at inline.cpp:4:3 frame #1: 0x000000010000037c a.out`regular() at inline.cpp:6:17 frame #2: 0x00000001000003b8 a.out`inlined2() at inline.cpp:7:43 frame #3: 0x00000001000003b4 a.out`main at inline.cpp:10:3 frame #4: 0x0000000186345be4 dyld`start + 7040 ``` After (note the `[inlined]` markers): ``` thread #1, queue = 'com.apple.main-thread', stop reason = breakpoint 1.2 * frame #0: 0x000000010000037c a.out`inlined1() at inline.cpp:4:3 [inlined] frame #1: 0x000000010000037c a.out`regular() at inline.cpp:6:17 frame #2: 0x00000001000003b8 a.out`inlined2() at inline.cpp:7:43 [inlined] frame #3: 0x00000001000003b4 a.out`main at inline.cpp:10:3 frame #4: 0x0000000186345be4 dyld`start + 7040 ``` rdar://152642178

These were failing on our Windows on Arm bot, or more precisely, not even completing. This is because Microsoft's C runtime does extra parameter validation. So when we called _read with an invalid fd, it called an invalid parameter handler instead of returning an error. https://learn.microsoft.com/en-us/%20cpp/c-runtime-library/reference/read?view=msvc-170 https://learn.microsoft.com/en-us/%20cpp/c-runtime-library/parameter-validation?view=msvc-170 (lldb) run Process 8440 launched: 'C:\Users\tcwg\llvm-worker\lldb-aarch64-windows\build\tools\lldb\unittests\Host\HostTests.exe' (aarch64) Process 8440 stopped * thread #1, stop reason = Exception 0xc0000409 encountered at address 0x7ffb7453564c frame #0: 0x00007ffb7453564c ucrtbase.dll`_get_thread_local_invalid_parameter_handler + 652 ucrtbase.dll`_get_thread_local_invalid_parameter_handler: -> 0x7ffb7453564c <+652>: brk #0xf003 ucrtbase.dll`_invalid_parameter_noinfo: 0x7ffb74535650 <+0>: b 0x7ffb745354d8 ; _get_thread_local_invalid_parameter_handler + 280 0x7ffb74535654 <+4>: nop 0x7ffb74535658 <+8>: nop You can override this handler but I'm assuming that this reading after close isn't a crucial feature, so disabling the tests seems like the way to go. If it is crucial, we can check the fd before we use it. Tests added by llvm#143946.

# Benefit This patch fixes: 1. After `platform select ios-simulator`, `platform process list` will now print processes which are running in the iOS simulator. Previously, no process will be listed. 2. After `platform select ios-simulator`, `platform attach --name <name>` will succeed. Previously, it will error out saying no process is found. # Several bugs that is being fixed 1. During the process listing, add `aarch64` to the list of CPU types for which iOS simulators are checked for. 2. Given a candidate process, when checking for simulators, the original code will find the desired environment variable (`SIMULATOR_UDID`) and set the OS to iOS, but then the immediate next environment variable will set it back to macOS. 3. For processes running on simulator, set the triple's `Environment` to `Simulator`, so that such processes can pass the filtering [in this line](https://fburl.com/8nivnrjx). The original code leave it as the default `UnknownEnvironment`. # Manual test **With this patch:** ``` royshi-mac-home ~/public_llvm/build % bin/lldb (lldb) platform select ios-simulator (lldb) platform process list 240 matching processes were found on "ios-simulator" PID PARENT USER TRIPLE NAME ====== ====== ========== ============================== ============================ 40511 28844 royshi arm64-apple-ios-simulator FocusPlayground // my toy iOS app running on simulator ... // omit 28844 1 royshi arm64-apple-ios-simulator launchd_sim (lldb) process attach --name FocusPlayground Process 40511 stopped * thread #1, queue = 'com.apple.main-thread', stop reason = signal SIGSTOP frame #0: 0x0000000104e3cb70 libsystem_kernel.dylib`mach_msg2_trap + 8 libsystem_kernel.dylib`mach_msg2_trap: -> 0x104e3cb70 <+8>: ret ... // omit ``` **Without this patch:** ``` $ bin/lldb (lldb) platform select ios-simulator (lldb) platform process list error: no processes were found on the "ios-simulator" platform (lldb) process attach --name FocusPlayground error: attach failed: could not find a process named FocusPlayground ``` # Unittest See PR.

The function already exposes a work list to avoid deep recursion, this commit starts utilizing it in a helper that could also lead to a deep recursion. We have observed this crash on `clang/test/C/C99/n590.c` with our internal builds that enable aggressive optimizations and hit the limit earlier than default release builds of Clang. See the added test for an example with a deeper recursion that used to crash in upstream Clang before this change with the following stack trace: ``` #0 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) /usr/local/google/home/ibiryukov/code/llvm-project/llvm/lib/Support/Unix/Signals.inc:804:13 #1 llvm::sys::RunSignalHandlers() /usr/local/google/home/ibiryukov/code/llvm-project/llvm/lib/Support/Signals.cpp:106:18 #2 SignalHandler(int, siginfo_t*, void*) /usr/local/google/home/ibiryukov/code/llvm-project/llvm/lib/Support/Unix/Signals.inc:0:3 #3 (/lib/x86_64-linux-gnu/libc.so.6+0x3fdf0) #4 AnalyzeImplicitConversions(clang::Sema&, clang::Expr*, clang::SourceLocation, bool) /usr/local/google/home/ibiryukov/code/llvm-project/clang/lib/Sema/SemaChecking.cpp:12772:0 #5 CheckCommaOperand /usr/local/google/home/ibiryukov/code/llvm-project/clang/lib/Sema/SemaChecking.cpp:0:3 #6 AnalyzeImplicitConversions /usr/local/google/home/ibiryukov/code/llvm-project/clang/lib/Sema/SemaChecking.cpp:12644:7 #7 AnalyzeImplicitConversions(clang::Sema&, clang::Expr*, clang::SourceLocation, bool) /usr/local/google/home/ibiryukov/code/llvm-project/clang/lib/Sema/SemaChecking.cpp:12776:5 #8 CheckCommaOperand /usr/local/google/home/ibiryukov/code/llvm-project/clang/lib/Sema/SemaChecking.cpp:0:3 #9 AnalyzeImplicitConversions /usr/local/google/home/ibiryukov/code/llvm-project/clang/lib/Sema/SemaChecking.cpp:12644:7 #10 AnalyzeImplicitConversions(clang::Sema&, clang::Expr*, clang::SourceLocation, bool) /usr/local/google/home/ibiryukov/code/llvm-project/clang/lib/Sema/SemaChecking.cpp:12776:5 #11 CheckCommaOperand /usr/local/google/home/ibiryukov/code/llvm-project/clang/lib/Sema/SemaChecking.cpp:0:3 #12 AnalyzeImplicitConversions /usr/local/google/home/ibiryukov/code/llvm-project/clang/lib/Sema/SemaChecking.cpp:12644:7 #13 AnalyzeImplicitConversions(clang::Sema&, clang::Expr*, clang::SourceLocation, bool) /usr/local/google/home/ibiryukov/code/llvm-project/clang/lib/Sema/SemaChecking.cpp:12776:5 #14 CheckCommaOperand /usr/local/google/home/ibiryukov/code/llvm-project/clang/lib/Sema/SemaChecking.cpp:0:3 #15 AnalyzeImplicitConversions /usr/local/google/home/ibiryukov/code/llvm-project/clang/lib/Sema/SemaChecking.cpp:12644:7 #16 AnalyzeImplicitConversions(clang::Sema&, clang::Expr*, clang::SourceLocation, bool) /usr/local/google/home/ibiryukov/code/llvm-project/clang/lib/Sema/SemaChecking.cpp:12776:5 #17 CheckCommaOperand /usr/local/google/home/ibiryukov/code/llvm-project/clang/lib/Sema/SemaChecking.cpp:0:3 #18 AnalyzeImplicitConversions /usr/local/google/home/ibiryukov/code/llvm-project/clang/lib/Sema/SemaChecking.cpp:12644:7 #19 AnalyzeImplicitConversions(clang::Sema&, clang::Expr*, clang::SourceLocation, bool) /usr/local/google/home/ibiryukov/code/llvm-project/clang/lib/Sema/SemaChecking.cpp:12776:5 ... 700+ more stack frames. ```

llvm#3004) …46600) When targeting GFX950, disassembly of v_permlane16_swap_b32 and v_permlane32_swap_b32 instructions produces errors when they use certain vdst operand values, e.g., v_permlane16_swap_b32 v218, v219. This patch fixes this problem. Co-authored-by: Jun Wang <[email protected]>

Fix unnecessary conversion of C-String to StringRef in the `Cmp` lambda inside `lookupLLVMIntrinsicByName`. This both fixes an ASAN error in the code that happens when the `Name` StringRef passed in is not a Null terminated StringRef, and additionally can potentially speed up the code as well by eliminating the unnecessary computation of string length every time a C String is converted to StringRef in this code (It seems practically this computation is eliminated in optimized builds, but this will avoid it in O0 builds as well). Added a unit test that demonstrates this issue by building LLVM with these options: ``` CMAKE_BUILD_TYPE=Debug LLVM_USE_SANITIZER=Address LLVM_OPTIMIZE_SANITIZED_BUILDS=OFF ``` The error reported is as follows: ``` ==462665==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5030000391a2 at pc 0x56525cc30bbf bp 0x7fff9e4ccc60 sp 0x7fff9e4cc428 READ of size 19 at 0x5030000391a2 thread T0 #0 0x56525cc30bbe in strlen (upstream-llvm-second/llvm-project/build/unittests/IR/IRTests+0x713bbe) (BuildId: 0651acf1e582a4d2) #1 0x7f8ff22ad334 in std::char_traits<char>::length(char const*) /usr/bin/../lib/gcc/x86_64-linux-gnu/13/../../../../include/c++/13/bits/char_traits.h:399:9 #2 0x7f8ff22a34a0 in llvm::StringRef::StringRef(char const*) /home/rjoshi/upstream-llvm-second/llvm-project/llvm/include/llvm/ADT/StringRef.h:96:33 #3 0x7f8ff28ca184 in _ZZL25lookupLLVMIntrinsicByNameN4llvm8ArrayRefIjEENS_9StringRefES2_ENK3$_0clIjPKcEEDaT_T0_ upstream-llvm-second/llvm-project/llvm/lib/IR/Intrinsics.cpp:673:18 ```

…lvm#148205) In the original motivating test case, [FoldList](https://github.com/llvm/llvm-project/blob/d8a2141ff98ee35cd1886f536ccc3548b012820b/llvm/lib/Target/AMDGPU/SIFoldOperands.cpp#L1764) had entries: ``` #0: UseMI: %224:sreg_32 = S_OR_B32 %219.sub0:sreg_64, %219.sub1:sreg_64, implicit-def dead $scc UseOpNo: 1 #1: UseMI: %224:sreg_32 = S_OR_B32 %219.sub0:sreg_64, %219.sub1:sreg_64, implicit-def dead $scc UseOpNo: 2 ``` After calling [updateOperand(#0)](https://github.com/llvm/llvm-project/blob/d8a2141ff98ee35cd1886f536ccc3548b012820b/llvm/lib/Target/AMDGPU/SIFoldOperands.cpp#L1773), [tryConstantFoldOp(#0.UseMI)](https://github.com/llvm/llvm-project/blob/d8a2141ff98ee35cd1886f536ccc3548b012820b/llvm/lib/Target/AMDGPU/SIFoldOperands.cpp#L1786) removed operand 1, and entry #&llvm#8203;1.UseOpNo was no longer valid, resulting in an [assert](https://github.com/llvm/llvm-project/blob/4a35214bddbb67f9597a500d48ab8c4fb25af150/llvm/include/llvm/ADT/ArrayRef.h#L452). This change defers constant folding until all operands have been updated so that UseOpNo values remain stable.

llvm#3004) …46600) When targeting GFX950, disassembly of v_permlane16_swap_b32 and v_permlane32_swap_b32 instructions produces errors when they use certain vdst operand values, e.g., v_permlane16_swap_b32 v218, v219. This patch fixes this problem. Co-authored-by: Jun Wang <[email protected]>

Extend support in LLDB for WebAssembly. This PR adds a new Process plugin (ProcessWasm) that extends ProcessGDBRemote for WebAssembly targets. It adds support for WebAssembly's memory model with separate address spaces, and the ability to fetch the call stack from the WebAssembly runtime. I have tested this change with the WebAssembly Micro Runtime (WAMR, https://github.com/bytecodealliance/wasm-micro-runtime) which implements a GDB debug stub and supports the qWasmCallStack packet. ``` (lldb) process connect --plugin wasm connect://localhost:4567 Process 1 stopped * thread #1, name = 'nobody', stop reason = trace frame #0: 0x40000000000001ad wasm32_args.wasm`main: -> 0x40000000000001ad <+3>: global.get 0 0x40000000000001b3 <+9>: i32.const 16 0x40000000000001b5 <+11>: i32.sub 0x40000000000001b6 <+12>: local.set 0 (lldb) b add Breakpoint 1: where = wasm32_args.wasm`add + 28 at test.c:4:12, address = 0x400000000000019c (lldb) c Process 1 resuming Process 1 stopped * thread #1, name = 'nobody', stop reason = breakpoint 1.1 frame #0: 0x400000000000019c wasm32_args.wasm`add(a=<unavailable>, b=<unavailable>) at test.c:4:12 1 int 2 add(int a, int b) 3 { -> 4 return a + b; 5 } 6 7 int (lldb) bt * thread #1, name = 'nobody', stop reason = breakpoint 1.1 * frame #0: 0x400000000000019c wasm32_args.wasm`add(a=<unavailable>, b=<unavailable>) at test.c:4:12 frame #1: 0x40000000000001e5 wasm32_args.wasm`main at test.c:12:12 frame #2: 0x40000000000001fe wasm32_args.wasm ``` This PR is based on an unmerged patch from Paolo Severini: https://reviews.llvm.org/D78801. I intentionally stuck to the foundations to keep this PR small. I have more PRs in the pipeline to support the other features/packets. My motivation for supporting Wasm is to support debugging Swift compiled to WebAssembly: https://www.swift.org/documentation/articles/wasm-getting-started.html

…erver (llvm#148774) Summary: There was a deadlock was introduced by [PR llvm#146441](llvm#146441) which changed `CurrentThreadIsPrivateStateThread()` to `CurrentThreadPosesAsPrivateStateThread()`. This change caused the execution path in [`ExecutionContextRef::SetTargetPtr()`](https://github.com/llvm/llvm-project/blob/10b5558b61baab59c7d3dff37ffdf0861c0cc67a/lldb/source/Target/ExecutionContext.cpp#L513) to now enter a code block that was previously skipped, triggering [`GetSelectedFrame()`](https://github.com/llvm/llvm-project/blob/10b5558b61baab59c7d3dff37ffdf0861c0cc67a/lldb/source/Target/ExecutionContext.cpp#L522) which leads to a deadlock. Thread 1 gets m_modules_mutex in [`ModuleList::AppendImpl`](https://github.com/llvm/llvm-project/blob/96148f92146e5211685246722664e51ec730e7ba/lldb/source/Core/ModuleList.cpp#L218), Thread 3 gets m_language_runtimes_mutex in [`GetLanguageRuntime`](https://github.com/llvm/llvm-project/blob/96148f92146e5211685246722664e51ec730e7ba/lldb/source/Target/Process.cpp#L1501), but then Thread 1 waits for m_language_runtimes_mutex in [`GetLanguageRuntime`](https://github.com/llvm/llvm-project/blob/96148f92146e5211685246722664e51ec730e7ba/lldb/source/Target/Process.cpp#L1501) while Thread 3 waits for m_modules_mutex in [`ScanForGNUstepObjCLibraryCandidate`](https://github.com/llvm/llvm-project/blob/96148f92146e5211685246722664e51ec730e7ba/lldb/source/Plugins/LanguageRuntime/ObjC/GNUstepObjCRuntime/GNUstepObjCRuntime.cpp#L57). This fixes the deadlock by adding a scoped block around the mutex lock before the call to the notifier, and moved the notifier call outside of the mutex-guarded section. The notifier call [`NotifyModuleAdded`](https://github.com/llvm/llvm-project/blob/96148f92146e5211685246722664e51ec730e7ba/lldb/source/Target/Target.cpp#L1810) should be thread-safe, since the module should be added to the `ModuleList` before the mutex is released, and the notifier doesn't modify the module list further, and the call is operates on local state and the `Target` instance. ### Deadlocked Thread backtraces: ``` * thread #3, name = 'dbg.evt-handler', stop reason = signal SIGSTOP * frame #0: 0x00007f2f1e2973dc libc.so.6`futex_wait(private=0, expected=2, futex_word=0x0000563786bd5f40) at futex-internal.h:146:13 /*... a bunch of mutex related bt ... */ liblldb.so.21.0git`std::lock_guard<std::recursive_mutex>::lock_guard(this=0x00007f2f0f1927b0, __m=0x0000563786bd5f40) at std_mutex.h:229:19 frame #8: 0x00007f2f27946eb7 liblldb.so.21.0git`ScanForGNUstepObjCLibraryCandidate(modules=0x0000563786bd5f28, TT=0x0000563786bd5eb8) at GNUstepObjCRuntime.cpp:60:41 frame #9: 0x00007f2f27946c80 liblldb.so.21.0git`lldb_private::GNUstepObjCRuntime::CreateInstance(process=0x0000563785e1d360, language=eLanguageTypeObjC) at GNUstepObjCRuntime.cpp:87:8 frame #10: 0x00007f2f2746fca5 liblldb.so.21.0git`lldb_private::LanguageRuntime::FindPlugin(process=0x0000563785e1d360, language=eLanguageTypeObjC) at LanguageRuntime.cpp:210:36 frame #11: 0x00007f2f2742c9e3 liblldb.so.21.0git`lldb_private::Process::GetLanguageRuntime(this=0x0000563785e1d360, language=eLanguageTypeObjC) at Process.cpp:1516:9 ... frame #21: 0x00007f2f2750b5cc liblldb.so.21.0git`lldb_private::Thread::GetSelectedFrame(this=0x0000563785e064d0, select_most_relevant=DoNoSelectMostRelevantFrame) at Thread.cpp:274:48 frame #22: 0x00007f2f273f9957 liblldb.so.21.0git`lldb_private::ExecutionContextRef::SetTargetPtr(this=0x00007f2f0f193778, target=0x0000563786bd5be0, adopt_selected=true) at ExecutionContext.cpp:525:32 frame #23: 0x00007f2f273f9714 liblldb.so.21.0git`lldb_private::ExecutionContextRef::ExecutionContextRef(this=0x00007f2f0f193778, target=0x0000563786bd5be0, adopt_selected=true) at ExecutionContext.cpp:413:3 frame #24: 0x00007f2f270e80af liblldb.so.21.0git`lldb_private::Debugger::GetSelectedExecutionContext(this=0x0000563785d83bc0) at Debugger.cpp:1225:23 frame #25: 0x00007f2f271bb7fd liblldb.so.21.0git`lldb_private::Statusline::Redraw(this=0x0000563785d83f30, update=true) at Statusline.cpp:136:41 ... * thread #1, name = 'lldb', stop reason = signal SIGSTOP * frame #0: 0x00007f2f1e2973dc libc.so.6`futex_wait(private=0, expected=2, futex_word=0x0000563785e1dd98) at futex-internal.h:146:13 /*... a bunch of mutex related bt ... */ liblldb.so.21.0git`std::lock_guard<std::recursive_mutex>::lock_guard(this=0x00007ffe62be0488, __m=0x0000563785e1dd98) at std_mutex.h:229:19 frame #8: 0x00007f2f2742c8d1 liblldb.so.21.0git`lldb_private::Process::GetLanguageRuntime(this=0x0000563785e1d360, language=eLanguageTypeC_plus_plus) at Process.cpp:1510:41 frame #9: 0x00007f2f2743c46f liblldb.so.21.0git`lldb_private::Process::ModulesDidLoad(this=0x0000563785e1d360, module_list=0x00007ffe62be06a0) at Process.cpp:6082:36 ... frame #13: 0x00007f2f2715cf03 liblldb.so.21.0git`lldb_private::ModuleList::AppendImpl(this=0x0000563786bd5f28, module_sp=ptr = 0x563785cec560, use_notifier=true) at ModuleList.cpp:246:19 frame #14: 0x00007f2f2715cf4c liblldb.so.21.0git`lldb_private::ModuleList::Append(this=0x0000563786bd5f28, module_sp=ptr = 0x563785cec560, notify=true) at ModuleList.cpp:251:3 ... frame #19: 0x00007f2f274349b3 liblldb.so.21.0git`lldb_private::Process::ConnectRemote(this=0x0000563785e1d360, remote_url=(Data = "connect://localhost:1234", Length = 24)) at Process.cpp:3250:9 frame #20: 0x00007f2f27411e0e liblldb.so.21.0git`lldb_private::Platform::DoConnectProcess(this=0x0000563785c59990, connect_url=(Data = "connect://localhost:1234", Length = 24), plugin_name=(Data = "gdb-remote", Length = 10), debugger=0x0000563785d83bc0, stream=0x00007ffe62be3128, target=0x0000563786bd5be0, error=0x00007ffe62be1ca0) at Platform.cpp:1926:23 ``` ## Test Plan: Built a hello world a.out Run server in one terminal: ``` ~/llvm/build/Debug/bin/lldb-server g :1234 a.out ``` Run client in another terminal ``` ~/llvm/build/Debug/bin/lldb -o "gdb-remote 1234" -o "b hello.cc:3" ``` Before: Client hangs indefinitely ``` ~/llvm/build/Debug/bin/lldb -o "gdb-remote 1234" -o "b main" (lldb) gdb-remote 1234 ^C^C ``` After: ``` ~/llvm/build/Debug/bin/lldb -o "gdb-remote 1234" -o "b hello.cc:3" (lldb) gdb-remote 1234 Process 837068 stopped * thread #1, name = 'a.out', stop reason = signal SIGSTOP frame #0: 0x00007ffff7fe4a60 ld-linux-x86-64.so.2`_start: -> 0x7ffff7fe4a60 <+0>: movq %rsp, %rdi 0x7ffff7fe4a63 <+3>: callq 0x7ffff7fe5780 ; _dl_start at rtld.c:522:1 ld-linux-x86-64.so.2`_dl_start_user: 0x7ffff7fe4a68 <+0>: movq %rax, %r12 0x7ffff7fe4a6b <+3>: movl 0x18067(%rip), %eax ; _dl_skip_args (lldb) b hello.cc:3 Breakpoint 1: where = a.out`main + 15 at hello.cc:4:13, address = 0x00005555555551bf (lldb) c Process 837068 resuming Process 837068 stopped * thread #1, name = 'a.out', stop reason = breakpoint 1.1 frame #0: 0x00005555555551bf a.out`main at hello.cc:4:13 1 #include <iostream> 2 3 int main() { -> 4 std::cout << "Hello World" << std::endl; 5 return 0; 6 } ```

…lvm#152156) With this new A320 in-order core, we follow adding the FeatureUseFixedOverScalableIfEqualCost feature to A510 and A520 (llvm#132246), which reaps the same code generation benefits of preferring fixed over scalable when the cost is equal. So when we have: ``` void foo(float* a, float* b, float* dst, unsigned n) { for (unsigned i = 0; i < n; ++i) dst[i] = a[i] + b[i]; } ``` When compiling without the feature enabled, we get: ``` ... ld1b { z0.b }, p0/z, [x0, x10] ld1b { z2.b }, p0/z, [x1, x10] add x12, x0, x10 ldr z1, [x12, #1, mul vl] add x12, x1, x10 ldr z3, [x12, #1, mul vl] fadd z0.s, z2.s, z0.s add x12, x2, x10 fadd z1.s, z3.s, z1.s dech x11 st1b { z0.b }, p0, [x2, x10] incb x10, all, mul #2 str z1, [x12, #1, mul vl] ... ``` When compiling with, we get: ``` ... ldp q0, q1, [x12, #-16] ldp q2, q3, [x11, #-16] subs x13, x13, #8 fadd v0.4s, v2.4s, v0.4s fadd v1.4s, v3.4s, v1.4s add x11, x11, #32 add x12, x12, #32 stp q0, q1, [x10, #-16] add x10, x10, #32 ... ```

M68k's SETCC instruction (`scc`) distinctly fills the destination byte with all 1s. If boolean contents are set to `ZeroOrOneBooleanContent`, LLVM can mistakenly think the destination holds `0x01` instead of `0xff` and emit broken code as a result. This change corrects the boolean content type to `ZeroOrNegativeOneBooleanContent`. For example, this IR: ```llvm define dso_local signext range(i8 0, 2) i8 @testBool(i32 noundef %a) local_unnamed_addr #0 { entry: %cmp = icmp eq i32 %a, 4660 %. = zext i1 %cmp to i8 ret i8 %. } ``` would previously build as: ```asm testBool: ; @testBool cmpi.l llvm#4660, (4,%sp) seq %d0 and.l #255, %d0 rts ``` Notice the `zext` is erroneously not clearing the low bits, and thus the register returns with 255 instead of 1. This patch fixes the issue: ```asm testBool: ; @testBool cmpi.l llvm#4660, (4,%sp) seq %d0 and.l #1, %d0 rts ``` Most of the tests containing `scc` suffered from the same value error as described above, so those tests have been updated to match the new output (which also logically corrects them).

## Problem When the new setting ``` set target.parallel-module-load true ``` was added, lldb began fetching modules from the devices from multiple threads simultaneously. This caused crashes of lldb when debugging on android devices. The top of the stack in the crash look something like this: ``` #0 0x0000555aaf2b27fe llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/opt/llvm/bin/lldb-dap+0xb87fe) #1 0x0000555aaf2b0a99 llvm::sys::RunSignalHandlers() (/opt/llvm/bin/lldb-dap+0xb6a99) #2 0x0000555aaf2b2fda SignalHandler(int, siginfo_t*, void*) (/opt/llvm/bin/lldb-dap+0xb8fda) #3 0x00007f9c02444560 __restore_rt /home/engshare/third-party2/glibc/2.34/src/glibc-2.34/signal/../sysdeps/unix/sysv/linux/libc_sigaction.c:13:0 #4 0x00007f9c04ea7707 lldb_private::ConnectionFileDescriptor::Disconnect(lldb_private::Status*) (usr/bin/../lib/liblldb.so.15+0x22a7707) #5 0x00007f9c04ea5b41 lldb_private::ConnectionFileDescriptor::~ConnectionFileDescriptor() (usr/bin/../lib/liblldb.so.15+0x22a5b41) #6 0x00007f9c04ea5c1e lldb_private::ConnectionFileDescriptor::~ConnectionFileDescriptor() (usr/bin/../lib/liblldb.so.15+0x22a5c1e) #7 0x00007f9c052916ff lldb_private::platform_android::AdbClient::SyncService::Stat(lldb_private::FileSpec const&, unsigned int&, unsigned int&, unsigned int&) (usr/bin/../lib/liblldb.so.15+0x26916ff) #8 0x00007f9c0528b9dc lldb_private::platform_android::PlatformAndroid::GetFile(lldb_private::FileSpec const&, lldb_private::FileSpec const&) (usr/bin/../lib/liblldb.so.15+0x268b9dc) ``` Our workaround was to set `set target.parallel-module-load ` to `false` to avoid the crash. ## Background PlatformAndroid creates two different classes with one stateful adb connection shared between the two -- one through AdbClient and another through AdbClient::SyncService. The connection management and state is complex, and seems to be responsible for the segfault we are seeing. The AdbClient code resets these connections at times, and re-establishes connections if they are not active. Similarly, PlatformAndroid caches its SyncService, which uses an AdbClient class, but the SyncService puts its connection into a different 'sync' state that is incompatible with a standard connection. ## Changes in this diff * This diff refactors the code to (hopefully) have clearer ownership of the connection, clearer separation of AdbClient and SyncService by making a new class for clearer separations of concerns, called AdbSyncService. * New unit tests are added * Additional logs were added (see llvm#145382 (comment) for details)

…namic (llvm#153420) Canonicalizing the following IR: ``` func.func @mul_zero_dynamic_nofold(%arg0: tensor<?x17xf32>) -> tensor<?x17xf32> { %0 = "tosa.const"() <{values = dense<0.000000e+00> : tensor<1x1xf32>}> : () -> tensor<1x1xf32> %1 = "tosa.const"() <{values = dense<0> : tensor<1xi8>}> : () -> tensor<1xi8> %2 = tosa.mul %arg0, %0, %1 : (tensor<?x17xf32>, tensor<1x1xf32>, tensor<1xi8>) -> tensor<?x17xf32> return %2 : tensor<?x17xf32> } ``` resulted in a crash ``` #0 0x000056513187e8db backtrace (./build-release/bin/mlir-opt+0x9d698db) #1 0x0000565131b17737 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) /local-ssd/sayans/Softwares/llvm-repo/llvm-project-latest/llvm/lib/Support/Unix/Signals.inc:838:8 #2 0x0000565131b187f3 PrintStackTraceSignalHandler(void*) /local-ssd/sayans/Softwares/llvm-repo/llvm-project-latest/llvm/lib/Support/Unix/Signals.inc:918:1 #3 0x0000565131b18c30 llvm::sys::RunSignalHandlers() /local-ssd/sayans/Softwares/llvm-repo/llvm-project-latest/llvm/lib/Support/Signals.cpp:105:18 #4 0x0000565131b18c30 SignalHandler(int, siginfo_t*, void*) /local-ssd/sayans/Softwares/llvm-repo/llvm-project-latest/llvm/lib/Support/Unix/Signals.inc:409:3 #5 0x00007f2e4165b050 (/lib/x86_64-linux-gnu/libc.so.6+0x3c050) #6 0x00007f2e416a9eec __pthread_kill_implementation ./nptl/pthread_kill.c:44:76 #7 0x00007f2e4165afb2 raise ./signal/../sysdeps/posix/raise.c:27:6 #8 0x00007f2e41645472 abort ./stdlib/abort.c:81:7 #9 0x00007f2e41645395 _nl_load_domain ./intl/loadmsgcat.c:1177:9 #10 0x00007f2e41653ec2 (/lib/x86_64-linux-gnu/libc.so.6+0x34ec2) #11 0x00005651443ec4ba mlir::DenseIntOrFPElementsAttr::getRaw(mlir::ShapedType, llvm::ArrayRef<char>) /local-ssd/sayans/Softwares/llvm-repo/llvm-project-latest/mlir/lib/IR/BuiltinAttributes.cpp:1361:3 #12 0x00005651443f1209 mlir::DenseElementsAttr::resizeSplat(mlir::ShapedType) /local-ssd/sayans/Softwares/llvm-repo/llvm-project-latest/mlir/lib/IR/BuiltinAttributes.cpp:0:10 #13 0x000056513f76f2b6 mlir::tosa::MulOp::fold(mlir::tosa::MulOpGenericAdaptor<llvm::ArrayRef<mlir::Attribute>>) /local-ssd/sayans/Softwares/llvm-repo/llvm-project-latest/mlir/lib/Dialect/Tosa/IR/TosaCanonicalizations.cpp:0:0 ``` from the folder for `tosa::mul` since the zero value was being reshaped to `?x17` size which isn't supported. AFAIK, `tosa.const` requires all dimensions to be static. So in this case, the fix is to not to fold the op.

…vm#153560) Fixes llvm#153157 The proposed solution has been discussed here (llvm#153157 (comment)) This is what we would be seeing now ``` base) anutosh491@Anutoshs-MacBook-Air bin % ./lldb /Users/anutosh491/work/xeus-cpp/a.out (lldb) target create "/Users/anutosh491/work/xeus-cpp/a.out" Current executable set to '/Users/anutosh491/work/xeus-cpp/a.out' (arm64). (lldb) b main Breakpoint 1: where = a.out`main, address = 0x0000000100003f90 (lldb) r Process 71227 launched: '/Users/anutosh491/work/xeus-cpp/a.out' (arm64) Process 71227 stopped * thread #1, queue = 'com.apple.main-thread', stop reason = breakpoint 1.1 frame #0: 0x0000000100003f90 a.out`main a.out`main: -> 0x100003f90 <+0>: sub sp, sp, #0x10 0x100003f94 <+4>: str wzr, [sp, #0xc] 0x100003f98 <+8>: str w0, [sp, #0x8] 0x100003f9c <+12>: str x1, [sp] (lldb) expression --repl -l c -- 1> 1 + 1 (int) $0 = 2 2> 2 + 2 (int) $1 = 4 ``` ``` base) anutosh491@Anutoshs-MacBook-Air bin % ./lldb /Users/anutosh491/work/xeus-cpp/a.out (lldb) target create "/Users/anutosh491/work/xeus-cpp/a.out" Current executable set to '/Users/anutosh491/work/xeus-cpp/a.out' (arm64). (lldb) b main Breakpoint 1: where = a.out`main, address = 0x0000000100003f90 (lldb) r Process 71355 launched: '/Users/anutosh491/work/xeus-cpp/a.out' (arm64) Process 71355 stopped * thread #1, queue = 'com.apple.main-thread', stop reason = breakpoint 1.1 frame #0: 0x0000000100003f90 a.out`main a.out`main: -> 0x100003f90 <+0>: sub sp, sp, #0x10 0x100003f94 <+4>: str wzr, [sp, #0xc] 0x100003f98 <+8>: str w0, [sp, #0x8] 0x100003f9c <+12>: str x1, [sp] (lldb) expression --repl -l c -- 3 + 3 Warning: trailing input is ignored in --repl mode 1> 1 + 1 (int) $0 = 2 ```

This can happen when JIT code is run, and we can't symbolize those frames, but they should remain numbered in the stack. An example spidermonkey trace: ``` #0 0x564ac90fb80f (/builds/worker/dist/bin/js+0x240e80f) (BuildId: 5d053c76aad4cfbd08259f8832e7ac78bbeeab58) #1 0x564ac9223a64 (/builds/worker/dist/bin/js+0x2536a64) (BuildId: 5d053c76aad4cfbd08259f8832e7ac78bbeeab58) #2 0x564ac922316f (/builds/worker/dist/bin/js+0x253616f) (BuildId: 5d053c76aad4cfbd08259f8832e7ac78bbeeab58) #3 0x564ac9eac032 (/builds/worker/dist/bin/js+0x31bf032) (BuildId: 5d053c76aad4cfbd08259f8832e7ac78bbeeab58) #4 0x0dec477ca22e (<unknown module>) ``` Without this change, the following symbolization is output: ``` #0 0x55a6d72f980f in MOZ_CrashSequence /builds/worker/workspace/obj-build/dist/include/mozilla/Assertions.h:248:3 #1 0x55a6d72f980f in Crash(JSContext*, unsigned int, JS::Value*) /builds/worker/checkouts/gecko/js/src/shell/js.cpp:4223:5 #2 0x55a6d7421a64 in CallJSNative(JSContext*, bool (*)(JSContext*, unsigned int, JS::Value*), js::CallReason, JS::CallArgs const&) /builds/worker/checkouts/gecko/js/src/vm/Interpreter.cpp:501:13 #3 0x55a6d742116f in js::InternalCallOrConstruct(JSContext*, JS::CallArgs const&, js::MaybeConstruct, js::CallReason) /builds/worker/checkouts/gecko/js/src/vm/Interpreter.cpp:597:12 #4 0x55a6d80aa032 in js::jit::DoCallFallback(JSContext*, js::jit::BaselineFrame*, js::jit::ICFallbackStub*, unsigned int, JS::Value*, JS::MutableHandle<JS::Value>) /builds/worker/checkouts/gecko/js/src/jit/BaselineIC.cpp:1705:10 #4 0x2c803bd8f22e (<unknown module>) ``` The last frame has a duplicate number. With this change the numbering is correct: ``` #0 0x5620c58ec80f in MOZ_CrashSequence /builds/worker/workspace/obj-build/dist/include/mozilla/Assertions.h:248:3 #1 0x5620c58ec80f in Crash(JSContext*, unsigned int, JS::Value*) /builds/worker/checkouts/gecko/js/src/shell/js.cpp:4223:5 #2 0x5620c5a14a64 in CallJSNative(JSContext*, bool (*)(JSContext*, unsigned int, JS::Value*), js::CallReason, JS::CallArgs const&) /builds/worker/checkouts/gecko/js/src/vm/Interpreter.cpp:501:13 #3 0x5620c5a1416f in js::InternalCallOrConstruct(JSContext*, JS::CallArgs const&, js::MaybeConstruct, js::CallReason) /builds/worker/checkouts/gecko/js/src/vm/Interpreter.cpp:597:12 #4 0x5620c669d032 in js::jit::DoCallFallback(JSContext*, js::jit::BaselineFrame*, js::jit::ICFallbackStub*, unsigned int, JS::Value*, JS::MutableHandle<JS::Value>) /builds/worker/checkouts/gecko/js/src/jit/BaselineIC.cpp:1705:10 #5 0x349f24c7022e (<unknown module>) ```

…gic (llvm#153086) Given the test case: ```llvm define fastcc i16 @testbtst(i16 %a) nounwind { entry: switch i16 %a, label %no [ i16 11, label %yes i16 10, label %yes i16 9, label %yes i16 4, label %yes i16 3, label %yes i16 2, label %yes ] yes: ret i16 1 no: ret i16 0 } ``` We currently get this result: ```asm testbtst: ; @testbtst ; %bb.0: ; %entry move.l %d0, %d1 and.l llvm#65535, %d1 sub.l #11, %d1 bhi .LBB0_3 ; %bb.1: ; %entry and.l llvm#65535, %d0 move.l llvm#3612, %d1 btst %d0, %d1 bne .LBB0_3 ; <------- Erroneous condition ; %bb.2: ; %yes moveq #1, %d0 rts .LBB0_3: ; %no moveq #0, %d0 rts ``` The cause of this is a line that explicitly reverses the `btst` condition code. But on M68k, `btst` sets condition codes the same as `and` with a bitmask, meaning `EQ` indicates failure (bit is zero) and not success, so the condition does not need to be reversed. In my testing, I've only been able to get switch statements to lower to `btst`, so I wasn't able to explicitly test other options for lowering. But (if possible to trigger) I believe they have the same logical error. For example, in `LowerAndToBTST()`, a comment specifies that it's lowering a case where the `and` result is compared against zero, which means the corresponding `btst` condition should also not be reversed. This patch simply flips the ternary expression in `getBitTestCondition()` to match the ISD condition code with the same M68k code, instead of the opposite.

llvm#137975) An authenticated pointer can be explicitly checked by the compiler via a sequence of instructions that executes BRK on failure. It is important to recognize such BRK instruction as checking every register (as it is expected to immediately trigger an abnormal program termination) to prevent false positive reports about authentication oracles: autia x2, x3 autia x0, x1 ; neither x0 nor x2 are checked at this point eor x16, x0, x0, lsl #1 tbz x16, #62, on_success ; marks x0 as checked ; end of BB: for x2 to be checked here, it must be checked in both ; successor basic blocks on_failure: brk 0xc470 on_success: ; x2 is checked ldr x1, [x2] ; marks x2 as checked

…build breakage from llvm#155943) (llvm#156103) ASan now detects dereferences of zero-sized allocations (llvm#155943; the corresponding MSan change is llvm#155944). This appears to have detected a bug in CrossOverTest.cpp, causing a buildbot breakage. This patch fixes the test. Buildbot report: https://lab.llvm.org/buildbot/#/builders/4/builds/8732 ``` 7: ==949882==ERROR: AddressSanitizer: heap-buffer-overflow on address 0xf169cfbe0010 at pc 0xb5f45efc6d1c bp 0xffffd933e460 sp 0xffffd933e458 check:20'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 8: READ of size 1 at 0xf169cfbe0010 thread T0 check:20'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 9: #0 0xb5f45efc6d18 in LLVMFuzzerTestOneInput /home/tcwg-buildbot/worker/clang-aarch64-sve-vls-2stage/llvm/compiler-rt/test/fuzzer/CrossOverTest.cpp:48:7 check:20'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ check:20'1 ? possible intended match 10: #1 0xb5f45eec7288 in fuzzer::Fuzzer::ExecuteCallback(unsigned char const*, unsigned long) /home/tcwg-buildbot/worker/clang-aarch64-sve-vls-2stage/llvm/compiler-rt/lib/fuzzer/FuzzerLoop.cpp:619:13 check:20'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 11: #2 0xb5f45eec85d4 in fuzzer::Fuzzer::ReadAndExecuteSeedCorpora(std::vector<fuzzer::SizedFile, std::allocator<fuzzer::SizedFile>>&) /home/tcwg-buildbot/worker/clang-aarch64-sve-vls-2stage/llvm/compiler-rt/lib/fuzzer/FuzzerLoop.cpp:812:3 check:20'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 12: #3 0xb5f45eec8c60 in fuzzer::Fuzzer::Loop(std::vector<fuzzer::SizedFile, std::allocator<fuzzer::SizedFile>>&) /home/tcwg-buildbot/worker/clang-aarch64-sve-vls-2stage/llvm/compiler-rt/lib/fuzzer/FuzzerLoop.cpp:872:3 check:20'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 13: #4 0xb5f45eeb5c64 in fuzzer::FuzzerDriver(int*, char***, int (*)(unsigned char const*, unsigned long)) /home/tcwg-buildbot/worker/clang-aarch64-sve-vls-2stage/llvm/compiler-rt/lib/fuzzer/FuzzerDriver.cpp:923:6 check:20'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 14: #5 0xb5f45eee09d0 in main /home/tcwg-buildbot/worker/clang-aarch64-sve-vls-2stage/llvm/compiler-rt/lib/fuzzer/FuzzerMain.cpp:20:10 check:20'0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ``` For context, FuzzerLoop.cpp:812 tries empty input: ``` 810 // Test the callback with empty input and never try it again. 811 uint8_t dummy = 0; 812 ExecuteCallback(&dummy, 0); ```

Reverts llvm#154949 due to suspected buildbot breakage (https://lab.llvm.org/buildbot/#/builders/55/builds/16630/steps/11/logs/stdio). Previously commented on the original pull request: llvm#154949 (comment) ``` ******************** TEST 'MLIR :: Dialect/XeGPU/subgroup-distribute.mlir' FAILED ******************** ... # | PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace. # | Stack dump: # | 0. Program arguments: /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm_build_hwasan/bin/mlir-opt -xegpu-subgroup-distribute -allow-unregistered-dialect -canonicalize -cse -split-input-file /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/mlir/test/Dialect/XeGPU/subgroup-distribute.mlir # | #0 0x0000c0af4b066df0 llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/llvm/lib/Support/Unix/Signals.inc:834:13 # | #1 0x0000c0af4b060e20 llvm::sys::RunSignalHandlers() /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/llvm/lib/Support/Signals.cpp:105:18 # | #2 0x0000c0af4b0691b4 SignalHandler(int, siginfo_t*, void*) /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/llvm/lib/Support/Unix/Signals.inc:426:38 # | #3 0x0000ee25a3dcb8f8 (linux-vdso.so.1+0x8f8) # | #4 0x0000ee25a36c7608 (/lib/aarch64-linux-gnu/libc.so.6+0x87608) # | #5 0x0000ee25a367cb3c raise (/lib/aarch64-linux-gnu/libc.so.6+0x3cb3c) # | #6 0x0000ee25a3667e00 abort (/lib/aarch64-linux-gnu/libc.so.6+0x27e00) # | #7 0x0000c0af4ae7e4b0 __sanitizer::Atexit(void (*)()) /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/compiler-rt/lib/sanitizer_common/sanitizer_posix_libcdep.cpp:168:10 # | #8 0x0000c0af4ae7c354 __sanitizer::Die() /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/compiler-rt/lib/sanitizer_common/sanitizer_termination.cpp:52:5 # | #9 0x0000c0af4ae66a30 Unlock /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/compiler-rt/lib/hwasan/../sanitizer_common/sanitizer_mutex.h:250:16 # | #10 0x0000c0af4ae66a30 ~GenericScopedLock /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/compiler-rt/lib/hwasan/../sanitizer_common/sanitizer_mutex.h:386:51 # | #11 0x0000c0af4ae66a30 __hwasan::ScopedReport::~ScopedReport() /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/compiler-rt/lib/hwasan/hwasan_report.cpp:54:5 # | #12 0x0000c0af4ae661b8 __hwasan::(anonymous namespace)::BaseReport::~BaseReport() /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/compiler-rt/lib/hwasan/hwasan_report.cpp:477:7 # | #13 0x0000c0af4ae63f5c __hwasan::ReportTagMismatch(__sanitizer::StackTrace*, unsigned long, unsigned long, bool, bool, unsigned long*) /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/compiler-rt/lib/hwasan/hwasan_report.cpp:1094:1 # | #14 0x0000c0af4ae4f8e0 Destroy /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/compiler-rt/lib/hwasan/../sanitizer_common/sanitizer_common.h:532:31 # | #15 0x0000c0af4ae4f8e0 ~InternalMmapVector /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/compiler-rt/lib/hwasan/../sanitizer_common/sanitizer_common.h:642:56 # | #16 0x0000c0af4ae4f8e0 __hwasan::HandleTagMismatch(__hwasan::AccessInfo, unsigned long, unsigned long, void*, unsigned long*) /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/compiler-rt/lib/hwasan/hwasan.cpp:245:1 # | #17 0x0000c0af4ae51e8c __hwasan_tag_mismatch4 /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/compiler-rt/lib/hwasan/hwasan.cpp:764:1 # | #18 0x0000c0af4ae67b30 __interception::InterceptFunction(char const*, unsigned long*, unsigned long, unsigned long) /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/compiler-rt/lib/interception/interception_linux.cpp:60:0 # | #19 0x0000c0af5641cd24 getNumResults /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/mlir/include/mlir/IR/Operation.h:404:37 # | #20 0x0000c0af5641cd24 getOpResultImpl /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/mlir/include/mlir/IR/Operation.h:1010:5 # | #21 0x0000c0af5641cd24 getResult /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/mlir/include/mlir/IR/Operation.h:407:54 # | #22 0x0000c0af5641cd24 mlir::OpTrait::detail::MultiResultTraitBase<mlir::gpu::WarpExecuteOnLane0Op, mlir::OpTrait::VariadicResults>::getResult(unsigned int) /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/mlir/include/mlir/IR/OpDefinition.h:638:62 # | #23 0x0000c0af56426b60 getType /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/mlir/include/mlir/IR/Value.h:63:33 # | #24 0x0000c0af56426b60 getType /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/mlir/include/mlir/IR/Value.h:105:39 # | #25 0x0000c0af56426b60 (anonymous namespace)::LoadDistribution::matchAndRewrite(mlir::gpu::WarpExecuteOnLane0Op, mlir::PatternRewriter&) const /home/b/sanitizer-aarch64-linux-bootstrap-hwasan/build/llvm-project/mlir/lib/Dialect/XeGPU/Transforms/XeGPUSubgroupDistribute.cpp:991:55 ... ```

Some downstream work broke these tests because the attribute number changed. Refactor these tests to be more resilient in the face of changes like this * `instrument-objc-method.m` * `#1` was never checked, I think it was trying to check that `__cyg_profile_func_enter` was not used, so I added `--implicit-check-not="__cyg_profile_func_enter"` * Use `[[#ATTR:]]` so the test doesn't fail if the number changes * `address-safety-attr.mm` * Check attributes in `Function Attrs:` so it's independent of the attribute number

Allow compilation for Amdgpu-target Gfx1010

6d80558

kzhuravl added a commit that referenced this pull request Jul 8, 2020

AMDGPU: Handle llvm.amdgcn.buffer.{load|store}.v2i16 intrinsics

6555b9b

Cherry-pick of patchset #1 https://reviews.llvm.org/D83249 Needed for 3.7, SWDEV-231101 Change-Id: I04ce9e8353526aa187ab854892f11d3a0f28c03b

searlmc1 pushed a commit that referenced this pull request Aug 14, 2020

AMDGPU: Handle llvm.amdgcn.buffer.{load|store}.v2i16 intrinsics

7d96782

Cherry-pick of patchset #1 https://reviews.llvm.org/D83249 Needed for 3.7, SWDEV-231101 Change-Id: I04ce9e8353526aa187ab854892f11d3a0f28c03b

b-sumner mentioned this pull request Jul 21, 2025

Example on How to Use the hostcall __ockl_call_host_function binding #284

Closed

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Allow compilation for Amdgpu-target Gfx1010 #1

Allow compilation for Amdgpu-target Gfx1010 #1

Uh oh!

ghostplant commented Feb 1, 2020

Uh oh!

Uh oh!

Allow compilation for Amdgpu-target Gfx1010 #1

Allow compilation for Amdgpu-target Gfx1010 #1

Uh oh!

Conversation

ghostplant commented Feb 1, 2020

Uh oh!

Uh oh!