build(deps): Bump pypa/cibuildwheel from 2.17.0 to 2.18.0 in the actions group

[dependabot]

Bumps the actions group with 1 update: pypa/cibuildwheel.

Updates pypa/cibuildwheel from 2.17.0 to 2.18.0

Release notes

Sourced from pypa/cibuildwheel's releases.

v2.18.0

• ✨ Adds CPython 3.13 support, under the prerelease flag CIBW_PRERELEASE_PYTHONS. This version of cibuildwheel uses 3.13.0b1. Free-threading mode is not available yet, waiting on official binaries (planned for beta 2) and pip support. While CPython is in beta, the ABI can change, so your wheels might not be compatible with the final release. For this reason, we don't recommend distributing wheels until RC1, at which point 3.13 will be available in cibuildwheel without the flag. (#1816)
• ✨ Musllinux now defaults to musllinux_1_2. You can set the older musllinux_1_1 via config if needed. (#1817)
• 🛠 No longer pre-seed setuptools/wheel in virtual environments (#1819)
• 🛠 Respect the constraints file when building with pip, matching build (#1818)
• 🛠 Use uv to compile our pinned dependencies, 10x faster and doesn't require special setup (#1778)
• 🐛 Fix an issue with the schema (#1788)
• 📚 Document the new delocate error checking macOS versions (#1766)
• 📚 Document Rust builds (#1816)
• 📚 Speed up our readthedocs builds with uv, 26 seconds -> 6 seconds to install dependencies (#1816)

Changelog

Sourced from pypa/cibuildwheel's changelog.

v2.18.0

12 May 2024

• ✨ Adds CPython 3.13 support, under the prerelease flag CIBW_PRERELEASE_PYTHONS. This version of cibuildwheel uses 3.13.0b1. Free-threading mode is not available yet, waiting on official binaries (planned for beta 2) and pip support.

  While CPython is in beta, the ABI can change, so your wheels might not be compatible with the final release. For this reason, we don't recommend distributing wheels until RC1, at which point 3.13 will be available in cibuildwheel without the flag. (#1816)

• ✨ Musllinux now defaults to musllinux_1_2. You can set the older manylinux_1_1 via config if needed. (#1817)

• 🛠 No longer pre-seed setuptools/wheel in virtual environments (#1819)

• 🛠 Respect the constraints file when building with pip, matching build (#1818)

• 🛠 Use uv to compile our pinned dependencies, 10x faster and doesn't require special setup (#1778)

• 🐛 Fix an issue with the schema (#1788)

• 📚 Document the new delocate error checking macOS versions (#1766)

• 📚 Document Rust builds (#1816)

• 📚 Speed up our readthedocs builds with uv, 26 seconds -> 6 seconds to install dependencies (#1816)

Commits

• 711a3d0 Bump version: v2.18.0
• 3873a1e chore: update bump_version script
• 6dd4f15 docs: rust (#1816)
• 44c4742 feat: add Python 3.13 beta 1 (#1815)
• c021744 feat: move default musllinux build to musllinux_1_2 (#1817)
• cf18014 fix: do not pre-seed setuptools / wheel in virtual environment (#1819)
• 3ea0a6c fix: respect constraints when building with pip (#1818)
• 30a0dec [Bot] Update dependencies (#1812)
• 988d512 [pre-commit.ci] pre-commit autoupdate (#1813)
• 98d57d9 Merge pull request #1766 from Czaki/delocate_info
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions

[jcfr]

pypa/[email protected] and delocate-0.11.0

delocate-wheel --require-archs arm64 -w /private/var/folders/3m/p59k4qdj0f17st0gn2cmj3640000gn/T/cibw-run-eptn76ba/cp312-macosx_arm64/repaired_wheel -v /private/var/folders/3m/p59k4qdj0f17st0gn2cmj3640000gn/T/cibw-run-eptn76ba/cp312-macosx_arm64/built_wheel/s5cmd-0.1.1.dev3+ga3f29a4-py3-none-macosx_11_0_arm64.whl
  Fixing: /private/var/folders/3m/p59k4qdj0f17st0gn2cmj3640000gn/T/cibw-run-eptn76ba/cp312-macosx_arm64/built_wheel/s5cmd-0.1.1.dev3+ga3f29a4-py3-none-macosx_11_0_arm64.whl
  Traceback (most recent call last):
    File "/private/var/folders/3m/p59k4qdj0f17st0gn2cmj3640000gn/T/cibw-run-eptn76ba/cp312-macosx_arm64/build/venv/lib/python3.12/site-packages/delocate/delocating.py", line 789, in _calculate_minimum_wheel_name
      arch_version[arch] = max(version, version_dkt[arch])
                                        ~~~~~~~~~~~^^^^^^
  KeyError: 'arm64'
  
  The above exception was the direct cause of the following exception:
  
  Traceback (most recent call last):
    File "/private/var/folders/3m/p59k4qdj0f17st0gn2cmj3640000gn/T/cibw-run-eptn76ba/cp312-macosx_arm64/build/venv/bin/delocate-wheel", line 8, in <module>
      sys.exit(main())
               ^^^^^^
    File "/private/var/folders/3m/p59k4qdj0f17st0gn2cmj3640000gn/T/cibw-run-eptn76ba/cp312-macosx_arm64/build/venv/lib/python3.12/site-packages/delocate/cmd/delocate_wheel.py", line 110, in main
      copied = delocate_wheel(
               ^^^^^^^^^^^^^^^
    File "/private/var/folders/3m/p59k4qdj0f17st0gn2cmj3640000gn/T/cibw-run-eptn76ba/cp312-macosx_arm64/build/venv/lib/python3.12/site-packages/delocate/delocating.py", line 1004, in delocate_wheel
      out_wheel_fixed = _check_and_update_wheel_name(
                        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    File "/private/var/folders/3m/p59k4qdj0f17st0gn2cmj3640000gn/T/cibw-run-eptn76ba/cp312-macosx_arm64/build/venv/lib/python3.12/site-packages/delocate/delocating.py", line 831, in _check_and_update_wheel_name
      new_name, problematic_files = _calculate_minimum_wheel_name(
                                    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    File "/private/var/folders/3m/p59k4qdj0f17st0gn2cmj3640000gn/T/cibw-run-eptn76ba/cp312-macosx_arm64/build/venv/lib/python3.12/site-packages/delocate/delocating.py", line 798, in _calculate_minimum_wheel_name
      raise DelocationError(
  delocate.libsana.DelocationError: Failed to find any binary with the required architecture: 'arm64'

Source: https://github.com/ImagingDataCommons/s5cmd-python-distributions/actions/runs/9071388683/job/24925023699?pr=2#step:4:238

pypa/[email protected] and delocate-0.10.7

delocate-wheel --require-archs arm64 -w /private/var/folders/1k/qq3pcbf12vb6vyblh81736p40000gn/T/cibw-run-35w7v4cn/cp312-macosx_arm64/repaired_wheel -v /private/var/folders/1k/qq3pcbf12vb6vyblh81736p40000gn/T/cibw-run-35w7v4cn/cp312-macosx_arm64/built_wheel/s5cmd-0.1.1.dev1+gdf582f2-py3-none-macosx_11_0_arm64.whl
  Fixing: /private/var/folders/1k/qq3pcbf12vb6vyblh81736p40000gn/T/cibw-run-35w7v4cn/cp312-macosx_arm64/built_wheel/s5cmd-0.1.1.dev1+gdf582f2-py3-none-macosx_11_0_arm64.whl

Source: https://github.com/ImagingDataCommons/s5cmd-python-distributions/actions/runs/8318596979/job/22760785320#step:4:274

[jcfr]

For changes introduced in delocate, see matthew-brett/delocate@0.10.7...0.11.0

[jcfr]

As reported in workflow output associated with:

• feat: Update scikit-build-core settings enabling cmake verbosity #3

... the archive s5cmd_2.2.2_macOS-64bit.tar.gz is being downloaded instead of the expected s5cmd_2.2.2_macOS-arm64.tar.gz

[jcfr]

@dependabot rebase