Add Quick Connect V2 Demo

main/CMakeLists.txt

@@ -13,6 +13,14 @@ if(CONFIG_GRI_ENABLE_SUB_PUB_UNSUB_DEMO)
     list(APPEND MAIN_SRCS "demo_tasks/sub_pub_unsub_demo/sub_pub_unsub_demo.c")
 endif()
 
+# QuickConnect V2 demo
+if(CONFIG_GRI_ENABLE_QUICKCONNECT_V2_DEMO)
+    list(APPEND MAIN_SRCS 
+        "demo_tasks/quickconnect_v2_demo/quickconnect_v2_demo.c"
+        "demo_tasks/temp_sub_pub_and_led_control_demo/hardware_drivers/app_driver.c"
+    )
+endif()
+
 # Temperature Sub Pub and LED control demo
 if(CONFIG_GRI_ENABLE_TEMPERATURE_PUB_SUB_AND_LED_CONTROL_DEMO)
     list(APPEND MAIN_SRCS
@@ -37,6 +45,7 @@ set(MAIN_INCLUDE_DIRS
     "."
     "demo_tasks/ota_over_mqtt_demo"
     "demo_tasks/sub_pub_unsub_demo"
+    "demo_tasks/quickconnect_v2_demo"
     "demo_tasks/temp_sub_pub_and_led_control_demo"
     "demo_tasks/temp_sub_pub_and_led_control_demo/hardware_drivers"
     "networking/wifi"

main/Kconfig.projbuild

@@ -253,9 +253,14 @@ menu "Featured FreeRTOS IoT Integration"
 
     endmenu # coreMQTT-Agent Manager Configurations
 
+    config GRI_ENABLE_QUICKCONNECT_V2_DEMO
+        bool "Enable QuickConnect V2 demo"
+        depends on !GRI_RUN_QUALIFICATION_TEST
+        default n
+
     config GRI_ENABLE_SUB_PUB_UNSUB_DEMO
         bool "Enable pub sub unsub demo"
-        depends on !GRI_RUN_QUALIFICATION_TEST
+        depends on !GRI_RUN_QUALIFICATION_TEST && !GRI_ENABLE_QUICKCONNECT_V2_DEMO
         default y
 
     menu "Sub pub unsub demo configurations"
@@ -308,7 +313,7 @@ menu "Featured FreeRTOS IoT Integration"
 
     config GRI_ENABLE_TEMPERATURE_PUB_SUB_AND_LED_CONTROL_DEMO
         bool "Enable temperature sensor pub sub and LED control demo"
-        depends on !GRI_RUN_QUALIFICATION_TEST
+        depends on !GRI_RUN_QUALIFICATION_TEST && !GRI_ENABLE_QUICKCONNECT_V2_DEMO
         default y
 
     menu "Temperature pub sub and LED control demo configurations"
@@ -378,7 +383,7 @@ menu "Featured FreeRTOS IoT Integration"
 
     config GRI_ENABLE_OTA_DEMO
         bool "Enable OTA demo"
-        depends on !GRI_RUN_QUALIFICATION_TEST
+        depends on !GRI_RUN_QUALIFICATION_TEST && !GRI_ENABLE_QUICKCONNECT_V2_DEMO
         default y
 
     menu "OTA demo configurations"

main/demo_tasks/quickconnect_v2_demo/GettingStartedWithQuickConnect.md

@@ -0,0 +1,77 @@
+# Getting Started With Quick Connect V2 Guide
+
+**_NOTE:_** This guide covers only Quick Connect V2. For all other demos, please refer to the [Getting Started Guide](../../../GettingStartedGuide.md).
+
+This guide contains instructions on how to setup, build and run only the Quick Connect V2 demo
+without use of the security features of the ESP32-C3 i.e. without enabling the
+DS peripheral, flash encryption and Secure Boot. The guide is meant to provide the
+user with a friendly first-use experience.
+
+[1 Pre-requisites](#1-pre-requisites)<br>
+
+[2 Demo setup](#2-demo-setup)<br>
+
+[3 Build and flash the demo project](#3-build-and-flash-the-demo-project)<br>
+
+[4 Monitoring the demo](#4-monitoring-the-demo)<br>
+
+
+## 1 Pre-requisites
+
+For hardware and software requirements, refer to sections [1.1 Hardware Requirements](../../../GettingStartedGuide.md#11-hardware-requirements) and [1.2 Software Requirements](../../../GettingStartedGuide.md#12-software-requirements) in the [Getting Started Guide](../../../GettingStartedGuide.md)
+
+## 2 Demo setup
+
+### 2.1 Get credentials from Quick Connect V2
+
+To get credentials for your device (Thing), visit [Quick Connect Credentials](https://quickconnect.iot.aws.dev/credentials) page and enter a desired device name (Thing Name) in the `Vend Credentials` section, and click the Vend button. Download both the `.crt` and `.key` files. These are your **PEM-encoded device certificate** and **PEM-encoded private key**. (An explanation of these entities is given in the [AWS IoT Core Setup Guide](AWSSetup.md).)
+
+### 2.2 Configure the project with the AWS IoT Thing Name and AWS device Endpoint
+
+The **AWS device Endpoint** is provided on the [Quick Connect Examples](https://quickconnect.iot.aws.dev) page.
+
+Follow the [2.2 Configure the project](../../../GettingStartedGuide.md#22-configure-the-project-with-the-aws-iot-thing-name-and-aws-device-endpoint) section in the [Getting Started Guide](../../../GettingStartedGuide.md) to configure your project.
+
+
+### 2.3 Provision the ESP32-C3 with the private key, device certificate and CA certificate in Development Mode
+
+For Quick Connect, use the following specific values:
+
+- `CA_CERT_FILEPATH`: Use the file in the `main/certs` directory, or download the AWS Root CA certificate from [here](https://www.amazontrust.com/repository/AmazonRootCA1.pem).
+- `DEVICE_CERT_FILEPATH`: The file path to the PEM-encoded device certificate (`.crt` file downloaded from the Quick Connect Website)
+- `PRIVATE_KEY_FILEPATH`: The file path to the PEM-encoded private key (`.key` file downloaded from the Quick Connect Website)
+- `KEY_ALG_INFO`: Use `RSA 2048`
+
+For complete provisioning instructions, follow the [2.3 Provision the ESP32-C3](../../../GettingStartedGuide.md#23-provision-the-esp32-c3-with-the-private-key-device-certificate-and-ca-certificate-in-development-mode) section in the [Getting Started Guide](../../../GettingStartedGuide.md).
+
+
+## 3 Build and flash the demo project
+
+For build and flash instructions, follow [3 Build and flash](../../../GettingStartedGuide.md#3-build-and-flash-the-demo-project) section of the [Getting Started Guide](../../../GettingStartedGuide.md).
+
+## 4 Monitoring the demo
+
+1. On the serial terminal console, confirm that the TLS connection was
+successful and that MQTT messages are published.
+
+```c
+I (4115) core_mqtt_agent_manager: WiFi connected.
+I (4115) app_wifi: Connected with IP Address:10.0.0.9
+I (4115) esp_netif_handlers: sta ip: 10.0.0.9, mask: 255.255.255.0, gw: 10.0.0.1
+I (4115) main_task: Returned from app_main()
+I (4685) core_mqtt_agent_manager: TLS connection established.
+I (5025) coreMQTT: MQTT connection established with the broker.
+I (5025) core_mqtt_agent_manager: Session present: 0
+
+I (5025) quickconnect_v2_demo: coreMQTT-Agent connected.
+I (5025) core_mqtt_agent_manager: coreMQTT-Agent connected.
+I (5025) quickconnect_v2_demo: Task "DemoTask" sending publish request to coreMQTT-Agent with message [{"label":"ESP32-S3 MCU Temperature","display_type":"line_graph","unit":"C","values":[{"value":0.0,"label":"temp"}]}] on topic "Thing-name" with ID 1.
+I (5055) quickconnect_v2_demo: Task "DemoTask" waiting for publish 1 to complete.
+I (5175) coreMQTT: Ack packet deserialized with result: MQTTSuccess.
+I (5175) coreMQTT: State record updated. New state=MQTTPublishDone.
+
+```
+
+2. On the [Quick Connect Visualizer](https://quickconnect.iot.aws.dev/visualizer) page, enter your device name (Thing name) in the `Visualizing device data` section, then confirm that the MQTT messages from the device are being received and a graph is being displayed.
+
+**Note**: This demo sends data in line graph format only. For other data visualization formats, refer to the [Quick Connect](https://quickconnect.iot.aws.dev/) documentation.