ESP32-H2 WeAct 2.9-inch Epaper Module Display-Info

This is the accompanying repository for my article "Getting Started with a 2.9-inch Epaper display connected to an ESP32-H2 Supermini device" available here: https://medium.com/@androidcrypto/16709f47ae23

The display comes in 2 variants, this is the "Black & White" version:

The display comes in 2 variants, this is the "Red, Black & White" version:

Required Libraries

GxEPD2 by "ZinggJM" version 1.6.4 (https://github.com/ZinggJM/GxEPD2)
Adafruit-GFX-Library by "Adafruit" version 1.12.1 (https://github.com/adafruit/Adafruit-GFX-Library)
U8G2_FOR_ADAFRUIT_GFX by "olikraus" latest version (https://github.com/olikraus/u8g2/)

Runtime Environment

Arduino 2.3.6 (Windows)
esp32 boards version 3.2.0
For compiling and uploading, I'm using the "ESP32-H2 Dev Module" board

Wiring

Nr name  color   ESP32-H2 pin
1  BUSY  violet  24 (labled as 'TX')
2  RES   orange  12
3  D/C   white   13
4  CS    blue    14
5  SCL   green   23 (labled as 'RX')
6  SDA   yellow  11 ('SDA' terminal is known as 'MOSI')
7  GND   black   GND
8  VCC   red     VCC is 3.3 volt, not 5 volt !

Back side of the display: