scripts: runner: Drop blflash in favor of bflb_mcu_tool

Use official flash tool by default.

Signed-off-by: Gerson Fernando Budke <[email protected]>

Author: nandojve

boards/bouffalolab/bl60x/bl604e_iot_dvk/board.cmake

@@ -19,5 +19,7 @@ board_runner_args(openocd --gdb-init "mem 0x42020000 0x4203C000 rw")
 board_runner_args(openocd --gdb-init "mem 0x23000000 0x23400000 ro")
 include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
 
-board_runner_args(blflash --port /dev/ttyACM0)
-include(${ZEPHYR_BASE}/boards/common/blflash.board.cmake)
+board_runner_args(bflb_mcu_tool --chipname bl602)
+include(${ZEPHYR_BASE}/boards/common/bflb_mcu_tool.board.cmake)
+
+board_set_flasher(bflb_mcu_tool)

boards/bouffalolab/bl60x/bl604e_iot_dvk/doc/index.rst

@@ -49,7 +49,7 @@ The board configuration supports the following hardware features:
 
 
 The default configurations can be found in the Kconfig
-:zephyr_file:`boards/bouffalolab/bl6/bl604e_iot_dvk/bl604e_iot_dvk_defconfig`.
+:zephyr_file:`boards/bouffalolab/bl60x/bl604e_iot_dvk/bl604e_iot_dvk_defconfig`.
 
 System Clock
 ============
@@ -66,53 +66,6 @@ USB Serial converter and port is used for both program and console.
 Programming and Debugging
 *************************
 
-BL Flash tool
-=============
-
-The BL-60x have a ROM bootloader that allows user flash device by serial port.
-There are some tools available at internet and this will describe one of them.
-The below guide was created based on RISC-V BL602 Book, chapter 3
-`Flashing Firmware to BL602`_.
-
-#. `Install Rustup`_
-
-#. Install cargo
-
-   .. code-block:: console
-
-      $ sudo apt-get install cargo
-
-#. Clone blflash rust version
-
-   .. code-block:: console
-
-      $ git clone --recursive https://github.com/spacemeowx2/blflash
-
-#. Build blflash
-
-   .. code-block:: console
-
-      $ cd blflash
-      $ cargo build --release
-
-#. Install blflash. The recommended use is copy to home folder
-
-   .. code-block:: console
-
-      $ cp target/release/blflash ~/bin/
-
-#. Test
-
-   .. code-block:: console
-
-      $ blflash -V
-
-   It will print blflash version
-
-   .. code-block:: console
-
-      $ blflash 0.3.5
-
 Samples
 =======
 
@@ -125,7 +78,7 @@ application:
       :goals: build
       :compact:
 
-#. To flash an image using blflash runner:
+#. To flash an image using bflb_mcu_tool runner:
 
    #. Press BOOT button
 
@@ -135,7 +88,7 @@ application:
 
    .. code-block:: console
 
-      west flash -r blflash
+      west flash
 
 #. Run your favorite terminal program to listen for output. Under Linux the
    terminal should be :code:`/dev/ttyACM0`. For example:
@@ -159,6 +112,9 @@ application:
       *** Booting Zephyr OS build v3.7.0-3255-g6e0fa5c1c77a ***
       Hello World! bl604e_iot_dvk/bl604e20q2i
 
+
+To debug the board you can use ``west debug`` command with OpenOCD.
+
 Congratulations, you have ``bl604e_iot_dvk`` configured and running Zephyr.
 
 
@@ -171,9 +127,6 @@ Congratulations, you have ``bl604e_iot_dvk`` configured and running Zephyr.
 .. _Bouffalo Lab Development Zone:
 	https://dev.bouffalolab.com/home?id=guest
 
-.. _Install Rustup:
-	https://rustup.rs/
-
 .. _The RISC-V BL602 Book:
 	https://lupyuen.github.io/articles/book
 

boards/common/blflash.board.cmake

@@ -28,7 +28,6 @@ def _import_runner_module(runner_name):
     # zephyr-keep-sorted-start
     'bflb_mcu_tool',
     'blackmagicprobe',
-    'blflash',
     'bossac',
     'canopen_program',
     'dediprog',

scripts/west_commands/runners/__init__.py

@@ -19,7 +19,6 @@ def test_runner_imports():
         'arc-nsim',
         'bflb_mcu_tool',
         'blackmagicprobe',
-        'blflash',
         'bossac',
         'canopen',
         'dediprog',