Add support for Molex Power Connectors

[engageant]

NetBox version

v3.5.4

Feature type

Data model extension

Proposed functionality

Add Molex Micro-Fit 2x2 to power port inlet type.

Use case

Various devices utilize various Molex connectors for power input. For example, Cradlepoint E300 and IBR900-1200M routers and the Cisco 891 router all use a 2x2 Molex Micro-Fit connector.

Database changes

None required.

External dependencies

None.

[jeremystretch]

Are these devices connecting directly to a power source via these connectors? Typically Molex connectors are used to connect an external power supply, which itself houses the device's actual power port.

[DanSheps]

They are external PSU. I have used 881's (similar to the 891's) before, it is a stupid connector.

However, if someone wanted to get pedantic they could model the power adapter as a separate device.

[engageant]

The Cradlepoints specifically can be hardwired to a vehicle ; the cable in this case just carries direct power and a couple GPIO lines.

[github-actions]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. NetBox is governed by a small group of core maintainers which means not all opened issues may receive direct feedback. Do not attempt to circumvent this process by "bumping" the issue; doing so will result in its immediate closure and you may be barred from participating in any future discussions. Please see our contributing guide.

[DanSheps]

Going to make this available for implementation as it does appear to be able to support direct connection to a DC power source.

Should likely add additional types for other devices (for example, Nexus 9k is typically a Molex Mini-FIT)

[github-actions]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. NetBox is governed by a small group of core maintainers which means not all opened issues may receive direct feedback. Do not attempt to circumvent this process by "bumping" the issue; doing so will result in its immediate closure and you may be barred from participating in any future discussions. Please see our contributing guide.