Cable tracing to/from Circuit Termination not working in v3.3.4

[Wexter]

NetBox version

v3.3.4

Python version

3.10

Steps to Reproduce

1. Create Provider Network
2. Create any device with at least one network interface
3. Create Circuit
4. Connect Termination A or Z to Provider Network
5. Connect second termination to device site and connect it with cable to device interface

Expected Behavior

Cable trace from Circuit Termination should show Destination

Observed Behavior

Destination shows "Incomplete", instead of Provider Network.
Also Cable connection in device interface shown as Not Reachable

Working example in 3.2.9 https://youtu.be/LhyJyduvS8w
Not working example in 3.3.4 https://youtu.be/dUaFSslZncU

[Wexter]

I've done some debugging and probably fixed this problem by setting CablePath.is_complete=True for Circuit Termination connected to Provider Network.
At least ./manage.py test dcim.tests.test_cablepaths were OK and trace now works as I expect.

[jeremystretch]

Thanks for digging into this @Wexter, and apologies for the delay in getting around to it.