mmc: sdhci-of-at91: fix wake-up issue when using runtime pm

It is impossible to wake-up on card detect event because when sdhci
controller is runtime suspended, it is assumed that all clocks are
disabled so we can't get irqs.
If the device is removable and there is no gpio to manage the card
detection then polling is used. It doesn't mean card detection is broken.
It is curently we only way to wake-up on card event if using runtime pm.

Signed-off-by: Ludovic Desroches <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>

Author: ldesroches

drivers/mmc/host/sdhci-of-at91.c

@@ -18,6 +18,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/mmc/host.h>
+#include <linux/mmc/slot-gpio.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -204,6 +205,25 @@ static int sdhci_at91_probe(struct platform_device *pdev)
 	if (ret)
 		goto pm_runtime_disable;
 
+	/*
+	 * When calling sdhci_runtime_suspend_host(), the sdhci layer makes
+	 * the assumption that all the clocks of the controller are disabled.
+	 * It means we can't get irq from it when it is runtime suspended.
+	 * For that reason, it is not planned to wake-up on a card detect irq
+	 * from the controller.
+	 * If we want to use runtime PM and to be able to wake-up on card
+	 * insertion, we have to use a GPIO for the card detection or we can
+	 * use polling. Be aware that using polling will resume/suspend the
+	 * controller between each attempt.
+	 * Disable SDHCI_QUIRK_BROKEN_CARD_DETECTION to be sure nobody tries
+	 * to enable polling via device tree with broken-cd property.
+	 */
+	if (!(host->mmc->caps & MMC_CAP_NONREMOVABLE) &&
+	    IS_ERR_VALUE(mmc_gpio_get_cd(host->mmc))) {
+		host->mmc->caps |= MMC_CAP_NEEDS_POLL;
+		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+	}
+
 	pm_runtime_put_autosuspend(&pdev->dev);
 
 	return 0;