Update boards.rst documentation

Author: earlephilhower

doc/boards.rst

@@ -4,7 +4,7 @@ Boards
 Generic ESP8266 Module
 ----------------------
 
-These modules come in different form factors and pinouts. See the page at ESP8266 community wiki for more info: `ESP8266 Module Family <https://www.esp8266.com/wiki/doku.php?id=esp8266-module-family>`__.
+These modules come in different form factors and pinouts. See the page at ESP8266 community wiki for more info: `ESP8266 Module Family <http://www.esp8266.com/wiki/doku.php?id=esp8266-module-family>`__.
 
 Usually these modules have no bootstapping resistors on board, insufficient decoupling capacitors, no voltage regulator, no reset circuit, and no USB-serial adapter. This makes using them somewhat tricky, compared to development boards which add these features.
 
@@ -203,7 +203,7 @@ note: - number = ((GPIO15 << 2) \| (GPIO0 << 1) \| GPIO2);
 Generic ESP8285 Module
 ----------------------
 
-ESP8285 (`datasheet <https://www.espressif.com/sites/default/files/0a-esp8285_datasheet_en_v1.0_20160422.pdf>`__) is a multi-chip package which contains ESP8266 and 1MB flash. All points related to bootstrapping resistors and recommended circuits listed above apply to ESP8285 as well.
+ESP8285 (`datasheet <http://www.espressif.com/sites/default/files/0a-esp8285_datasheet_en_v1.0_20160422.pdf>`__) is a multi-chip package which contains ESP8266 and 1MB flash. All points related to bootstrapping resistors and recommended circuits listed above apply to ESP8285 as well.
 
 Note that since ESP8285 has SPI flash memory internally connected in DOUT mode, pins 9 and 10 may be used as GPIO / I2C / PWM pins.
 

package/package_esp8266com_index.template.json

@@ -299,4 +299,4 @@
          ]
       }
    ]
-}
+}