fix(conf): correct comments in 'esp_panel_board_custom_conf.h'

Author: Lzw655

CHANGELOG.md

@@ -6,7 +6,8 @@
 
 * fix(touch): avoid reading the button state when disabled (#162)
 * fix(docs): correct and add descriptions
-* fix(board): compile failure when using a touch screen with SPI bus @tilordleo (#169)
+* fix(board): resolve compilation error for SPI touch screens @tilordleo (#169)
+* fix(conf): correct comments in `esp_panel_board_custom_conf.h`
 
 ## v1.0.0 - 2025-02-17
 

esp_panel_board_custom_conf.h

@@ -162,8 +162,8 @@
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_SCL_USE_EXPNADER    (0) // Set to 1 if the signal is controlled by an IO expander
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_SDA_USE_EXPNADER    (0) // Set to 1 if the signal is controlled by an IO expander
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_MODE                (0) // 0-3, typically set to 0
-    #define ESP_PANEL_BOARD_LCD_RGB_SPI_CMD_BYTES           (1) // Typically set to 8
-    #define ESP_PANEL_BOARD_LCD_RGB_SPI_PARAM_BYTES         (1) // Typically set to 8
+    #define ESP_PANEL_BOARD_LCD_RGB_SPI_CMD_BYTES           (1) // Typically set to 1
+    #define ESP_PANEL_BOARD_LCD_RGB_SPI_PARAM_BYTES         (1) // Typically set to 1
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_USE_DC_BIT          (1) // 0/1. Typically set to 1
 #endif // ESP_PANEL_BOARD_LCD_RGB_USE_CONTROL_PANEL
     /* For refresh panel (RGB) */
@@ -736,7 +736,7 @@
  */
 #define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MAJOR 1
 #define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MINOR 0
-#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_PATCH 0
+#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_PATCH 1
 
 #endif // ESP_PANEL_BOARD_USE_CUSTOM
 

examples/arduino/board/board_static_config/esp_panel_board_custom_conf.h

@@ -162,8 +162,8 @@
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_SCL_USE_EXPNADER    (0) // Set to 1 if the signal is controlled by an IO expander
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_SDA_USE_EXPNADER    (0) // Set to 1 if the signal is controlled by an IO expander
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_MODE                (0) // 0-3, typically set to 0
-    #define ESP_PANEL_BOARD_LCD_RGB_SPI_CMD_BYTES           (1) // Typically set to 8
-    #define ESP_PANEL_BOARD_LCD_RGB_SPI_PARAM_BYTES         (1) // Typically set to 8
+    #define ESP_PANEL_BOARD_LCD_RGB_SPI_CMD_BYTES           (1) // Typically set to 1
+    #define ESP_PANEL_BOARD_LCD_RGB_SPI_PARAM_BYTES         (1) // Typically set to 1
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_USE_DC_BIT          (1) // 0/1. Typically set to 1
 #endif // ESP_PANEL_BOARD_LCD_RGB_USE_CONTROL_PANEL
     /* For refresh panel (RGB) */
@@ -736,7 +736,7 @@
  */
 #define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MAJOR 1
 #define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MINOR 0
-#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_PATCH 0
+#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_PATCH 1
 
 #endif // ESP_PANEL_BOARD_USE_CUSTOM
 

examples/arduino/gui/lvgl_v8/simple_port/esp_panel_board_custom_conf.h

@@ -162,8 +162,8 @@
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_SCL_USE_EXPNADER    (0) // Set to 1 if the signal is controlled by an IO expander
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_SDA_USE_EXPNADER    (0) // Set to 1 if the signal is controlled by an IO expander
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_MODE                (0) // 0-3, typically set to 0
-    #define ESP_PANEL_BOARD_LCD_RGB_SPI_CMD_BYTES           (1) // Typically set to 8
-    #define ESP_PANEL_BOARD_LCD_RGB_SPI_PARAM_BYTES         (1) // Typically set to 8
+    #define ESP_PANEL_BOARD_LCD_RGB_SPI_CMD_BYTES           (1) // Typically set to 1
+    #define ESP_PANEL_BOARD_LCD_RGB_SPI_PARAM_BYTES         (1) // Typically set to 1
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_USE_DC_BIT          (1) // 0/1. Typically set to 1
 #endif // ESP_PANEL_BOARD_LCD_RGB_USE_CONTROL_PANEL
     /* For refresh panel (RGB) */
@@ -736,7 +736,7 @@
  */
 #define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MAJOR 1
 #define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MINOR 0
-#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_PATCH 0
+#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_PATCH 1
 
 #endif // ESP_PANEL_BOARD_USE_CUSTOM
 

examples/arduino/gui/lvgl_v8/simple_rotation/esp_panel_board_custom_conf.h

@@ -162,8 +162,8 @@
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_SCL_USE_EXPNADER    (0) // Set to 1 if the signal is controlled by an IO expander
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_SDA_USE_EXPNADER    (0) // Set to 1 if the signal is controlled by an IO expander
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_MODE                (0) // 0-3, typically set to 0
-    #define ESP_PANEL_BOARD_LCD_RGB_SPI_CMD_BYTES           (1) // Typically set to 8
-    #define ESP_PANEL_BOARD_LCD_RGB_SPI_PARAM_BYTES         (1) // Typically set to 8
+    #define ESP_PANEL_BOARD_LCD_RGB_SPI_CMD_BYTES           (1) // Typically set to 1
+    #define ESP_PANEL_BOARD_LCD_RGB_SPI_PARAM_BYTES         (1) // Typically set to 1
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_USE_DC_BIT          (1) // 0/1. Typically set to 1
 #endif // ESP_PANEL_BOARD_LCD_RGB_USE_CONTROL_PANEL
     /* For refresh panel (RGB) */
@@ -736,7 +736,7 @@
  */
 #define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MAJOR 1
 #define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MINOR 0
-#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_PATCH 0
+#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_PATCH 1
 
 #endif // ESP_PANEL_BOARD_USE_CUSTOM
 

examples/arduino/gui/lvgl_v8/squareline_port/esp_panel_board_custom_conf.h

@@ -162,8 +162,8 @@
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_SCL_USE_EXPNADER    (0) // Set to 1 if the signal is controlled by an IO expander
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_SDA_USE_EXPNADER    (0) // Set to 1 if the signal is controlled by an IO expander
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_MODE                (0) // 0-3, typically set to 0
-    #define ESP_PANEL_BOARD_LCD_RGB_SPI_CMD_BYTES           (1) // Typically set to 8
-    #define ESP_PANEL_BOARD_LCD_RGB_SPI_PARAM_BYTES         (1) // Typically set to 8
+    #define ESP_PANEL_BOARD_LCD_RGB_SPI_CMD_BYTES           (1) // Typically set to 1
+    #define ESP_PANEL_BOARD_LCD_RGB_SPI_PARAM_BYTES         (1) // Typically set to 1
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_USE_DC_BIT          (1) // 0/1. Typically set to 1
 #endif // ESP_PANEL_BOARD_LCD_RGB_USE_CONTROL_PANEL
     /* For refresh panel (RGB) */
@@ -736,7 +736,7 @@
  */
 #define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MAJOR 1
 #define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MINOR 0
-#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_PATCH 0
+#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_PATCH 1
 
 #endif // ESP_PANEL_BOARD_USE_CUSTOM
 

examples/arduino/gui/lvgl_v8/squareline_wifi_clock/esp_panel_board_custom_conf.h

@@ -162,8 +162,8 @@
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_SCL_USE_EXPNADER    (0) // Set to 1 if the signal is controlled by an IO expander
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_SDA_USE_EXPNADER    (0) // Set to 1 if the signal is controlled by an IO expander
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_MODE                (0) // 0-3, typically set to 0
-    #define ESP_PANEL_BOARD_LCD_RGB_SPI_CMD_BYTES           (1) // Typically set to 8
-    #define ESP_PANEL_BOARD_LCD_RGB_SPI_PARAM_BYTES         (1) // Typically set to 8
+    #define ESP_PANEL_BOARD_LCD_RGB_SPI_CMD_BYTES           (1) // Typically set to 1
+    #define ESP_PANEL_BOARD_LCD_RGB_SPI_PARAM_BYTES         (1) // Typically set to 1
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_USE_DC_BIT          (1) // 0/1. Typically set to 1
 #endif // ESP_PANEL_BOARD_LCD_RGB_USE_CONTROL_PANEL
     /* For refresh panel (RGB) */
@@ -736,7 +736,7 @@
  */
 #define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MAJOR 1
 #define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MINOR 0
-#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_PATCH 0
+#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_PATCH 1
 
 #endif // ESP_PANEL_BOARD_USE_CUSTOM
 

examples/platformio/lvgl_v8_port/src/esp_panel_board_custom_conf.h

@@ -162,8 +162,8 @@
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_SCL_USE_EXPNADER    (0) // Set to 1 if the signal is controlled by an IO expander
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_SDA_USE_EXPNADER    (0) // Set to 1 if the signal is controlled by an IO expander
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_MODE                (0) // 0-3, typically set to 0
-    #define ESP_PANEL_BOARD_LCD_RGB_SPI_CMD_BYTES           (1) // Typically set to 8
-    #define ESP_PANEL_BOARD_LCD_RGB_SPI_PARAM_BYTES         (1) // Typically set to 8
+    #define ESP_PANEL_BOARD_LCD_RGB_SPI_CMD_BYTES           (1) // Typically set to 1
+    #define ESP_PANEL_BOARD_LCD_RGB_SPI_PARAM_BYTES         (1) // Typically set to 1
     #define ESP_PANEL_BOARD_LCD_RGB_SPI_USE_DC_BIT          (1) // 0/1. Typically set to 1
 #endif // ESP_PANEL_BOARD_LCD_RGB_USE_CONTROL_PANEL
     /* For refresh panel (RGB) */
@@ -736,7 +736,7 @@
  */
 #define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MAJOR 1
 #define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_MINOR 0
-#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_PATCH 0
+#define ESP_PANEL_BOARD_CUSTOM_FILE_VERSION_PATCH 1
 
 #endif // ESP_PANEL_BOARD_USE_CUSTOM
 

src/esp_panel_versions.h

@@ -18,7 +18,7 @@
 /* File `esp_panel_board_custom_conf.h` */
 #define ESP_PANEL_BOARD_CUSTOM_VERSION_MAJOR 1
 #define ESP_PANEL_BOARD_CUSTOM_VERSION_MINOR 0
-#define ESP_PANEL_BOARD_CUSTOM_VERSION_PATCH 0
+#define ESP_PANEL_BOARD_CUSTOM_VERSION_PATCH 1
 
 /* File `esp_panel_board_supported_conf.h` */
 #define ESP_PANEL_BOARD_SUPPORTED_VERSION_MAJOR 1