Merge pull request #104 from esp-arduino-libs/feat/add_screen_drift_additional_info

feat(docs): add additional information about screen drift issue

Author: Lzw655

CHANGELOG.md

@@ -1,5 +1,11 @@
 # ChangeLog
 
+## v0.1.7 - 2024-08-22
+
+### Enhancements:
+
+* feat(docs): add additional information about screen drift issue
+
 ## v0.1.6 - 2024-07-30
 
 ### Enhancements:

README.md

@@ -428,11 +428,13 @@ When encountering screen drift issue when driving RGB LCD with ESP32-S3, you can
 
    - **Step 1**: Download the "high_perf" version of the SDK from [arduino-esp32-sdk](https://github.com/esp-arduino-libs/arduino-esp32-sdk) and replace it in the [installation directory of arduino-esp32](#where-are-the-installation-directory-for-arduino-esp32-and-the-sdk-located).
 
-   - **Step 2**: If you're using supported development boards, usually there's no need to modify the code as they set `ESP_PANEL_LCD_RGB_BOUNCE_BUF_SIZE` to `(ESP_PANEL_LCD_WIDTH * 10)` by default. If the issue persists, refer to the example code below to increase the size of the `Bounce Buffer`.
+   - **Step 2**: If you are using supported development boards, usually there's no need to modify the code as they set `ESP_PANEL_LCD_RGB_BOUNCE_BUF_SIZE` to `(ESP_PANEL_LCD_WIDTH * 10)` by default. If the issue persists, refer to the example code below to increase the size of the `Bounce Buffer`.
 
-   - **Step 3**: If you're using a custom board, confirm in the `ESP_Panel_Board_Custom.h` file whether `ESP_PANEL_LCD_RGB_BOUNCE_BUF_SIZE` is set to non-zero. If the issue persists, increase the size of the `Bounce Buffer`.
+   - **Step 3**: If you are using a custom board, confirm in the `ESP_Panel_Board_Custom.h` file whether `ESP_PANEL_LCD_RGB_BOUNCE_BUF_SIZE` is set to non-zero. If the issue persists, increase the size of the `Bounce Buffer`.
 
-   - **Step 4**: If you're using an independent driver, refer to the example code below to set the size of the `Bounce Buffer`.
+   - **Step 4**: If you are using an independent driver, refer to the example code below to set the size of the `Bounce Buffer`.
+
+   - **Step 5**: If you are developing an LVGL application, assign the task that initializes the RGB peripheral and the task that runs the LVGL `lv_timer_handler()` on the same core. Please refer to [the code](./examples/LVGL/v8/Porting/lvgl_port_v8.h#L53).
 
 3. **Example Code**: The following example code demonstrates how to modify the size of the `Bounce Buffer` using `ESP_Panel` driver or independent driver:
 

README_CN.md

@@ -434,6 +434,8 @@ arduino-esp32 v3.x.x 版本的 SDK 位于默认安装路径下的 `tools > esp32
 
    - **Step4**：如果您使用的是独立的驱动，请参考下面的示例代码来设置 `Bounce Bufer` 的大小。
 
+   - **Step5**：如果您正在开发 LVGL 应用，将执行 RGB 外设初始化的任务与执行 LVGL lv_timer_handler() 的任务分配在同一个核上，请参考 [代码](./examples/LVGL/v8/Porting/lvgl_port_v8.h#L53)。
+
 3. **示例代码**：以下示例代码展示了如何通过 `ESP_Panel` 驱动或独立的驱动来修改 `Bounce Bufer` 的大小：
 
    **Example1**：使用 `ESP_Panel` 驱动修改 `Bounce Bufer` 大小：

library.properties

@@ -1,5 +1,5 @@
 name=ESP32_Display_Panel
-version=0.1.6
+version=0.1.7
 author=espressif
 maintainer=espressif
 sentence=ESP32_Display_Panel is an Arduino library designed for ESP SoCs to drive display panels and facilitate rapid GUI development.

src/ESP_PanelVersions.h

@@ -11,7 +11,7 @@
 /* Library Version */
 #define ESP_PANEL_VERSION_MAJOR 0
 #define ESP_PANEL_VERSION_MINOR 1
-#define ESP_PANEL_VERSION_PATCH 6
+#define ESP_PANEL_VERSION_PATCH 7
 
 /* File `ESP_Panel_Conf.h` */
 #define ESP_PANEL_CONF_VERSION_MAJOR 0