scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.

The QLogic FastLinQ Driver for FCoE (qedf) is the FCoE specific module
for 41000 Series Converged Network Adapters by QLogic. This patch
consists of following changes:

- MAINTAINERS Makefile and Kconfig changes for qedf
- PCI driver registration
- libfc/fcoe host level initialization
- SCSI host template initialization and callbacks
- Debugfs and log level infrastructure
- Link handling
- Firmware interface structures
- QED core module initialization
- Light L2 interface callbacks
- I/O request initialization
- Firmware I/O completion handling
- Firmware ELS request/response handling
- FIP request/response handled by the driver itself

Signed-off-by: Nilesh Javali <[email protected]>
Signed-off-by: Manish Rangankar <[email protected]>
Signed-off-by: Saurav Kashyap <[email protected]>
Signed-off-by: Arun Easi <[email protected]>
Signed-off-by: Chad Dupuis <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

Author: Dupuis, Chad

MAINTAINERS

@@ -10242,6 +10242,12 @@ L:	[email protected]
 S:	Supported
 F:	drivers/scsi/qedi/
 
+QLOGIC QL41xxx FCOE DRIVER
+M:	[email protected]
+L:	[email protected]
+S:	Supported
+F:	drivers/scsi/qedf/
+
 QNX4 FILESYSTEM
 M:	Anders Larsen <[email protected]>
 W:	http://www.alarsen.net/linux/qnx4fs/

drivers/scsi/Kconfig

@@ -1235,6 +1235,7 @@ config SCSI_QLOGICPTI
 source "drivers/scsi/qla2xxx/Kconfig"
 source "drivers/scsi/qla4xxx/Kconfig"
 source "drivers/scsi/qedi/Kconfig"
+source "drivers/scsi/qedf/Kconfig"
 
 config SCSI_LPFC
 	tristate "Emulex LightPulse Fibre Channel Support"

drivers/scsi/Makefile

@@ -41,6 +41,7 @@ obj-$(CONFIG_FCOE)		+= fcoe/
 obj-$(CONFIG_FCOE_FNIC)		+= fnic/
 obj-$(CONFIG_SCSI_SNIC)		+= snic/
 obj-$(CONFIG_SCSI_BNX2X_FCOE)	+= libfc/ fcoe/ bnx2fc/
+obj-$(CONFIG_QEDF)		+= qedf/
 obj-$(CONFIG_ISCSI_TCP) 	+= libiscsi.o	libiscsi_tcp.o iscsi_tcp.o
 obj-$(CONFIG_INFINIBAND_ISER) 	+= libiscsi.o
 obj-$(CONFIG_ISCSI_BOOT_SYSFS)	+= iscsi_boot_sysfs.o

drivers/scsi/qedf/Kconfig

@@ -0,0 +1,11 @@
+config QEDF
+	tristate "QLogic QEDF 25/40/100Gb FCoE Initiator Driver Support"
+	depends on PCI && SCSI
+	depends on QED
+        depends on LIBFC
+        depends on LIBFCOE
+	select QED_LL2
+	select QED_FCOE
+	---help---
+	This driver supports FCoE offload for the QLogic FastLinQ
+	41000 Series Converged Network Adapters.

drivers/scsi/qedf/Makefile

@@ -0,0 +1,5 @@
+obj-$(CONFIG_QEDF) := qedf.o
+qedf-y = qedf_dbg.o qedf_main.o qedf_io.o qedf_fip.o \
+	 qedf_attr.o qedf_els.o
+
+qedf-$(CONFIG_DEBUG_FS) += qedf_debugfs.o