Skip to content

README: add the deep-kernel information to the README #5

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom
Merged
merged 1 commit into from
Oct 21, 2022
Merged

README: add the deep-kernel information to the README #5

merged 1 commit into from
Oct 21, 2022

Conversation

@huangbibo
Copy link
Collaborator

Signed-off-by: huangbibo [email protected]
Change-Id: I71a252108c26840205576414db19a6c4c9e1b7f1

@huangbibo
README: add the deep-kernel information to the README
d1e52dd 
Signed-off-by: huangbibo <[email protected]>
Change-Id: I71a252108c26840205576414db19a6c4c9e1b7f1
@zccrs zccrs merged commit 19a1571 into deepin-community:UOS-K5.10-LTS Oct 21, 2022
matrix-wsk pushed a commit that referenced this pull request Aug 14, 2023
@gregkh
net/mlx5e: Don't hold encap tbl lock if there is no encap action
2e76da7 
[ Upstream commit 93a3319 ]

The cited commit holds encap tbl lock unconditionally when setting
up dests. But it may cause the following deadlock:

 PID: 1063722  TASK: ffffa062ca5d0000  CPU: 13   COMMAND: "handler8"
  #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91
  #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb
  #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528
  #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb
  #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb
  #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core]
  #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core]
  #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core]
  #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core]
  #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core]
 #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core]
 #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core]
 #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core]
 #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8
 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower]
 #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower]
 #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0

[1031218.028143]  wait_for_completion+0x24/0x30
[1031218.028589]  mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core]
[1031218.029256]  mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core]
[1031218.029885]  process_one_work+0x24e/0x510

Actually no need to hold encap tbl lock if there is no encap action.
Fix it by checking if encap action exists or not before holding
encap tbl lock.

Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running")
Signed-off-by: Chris Mi <[email protected]>
Reviewed-by: Vlad Buslov <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
matrix-wsk pushed a commit that referenced this pull request Sep 20, 2023
@acmel @gregkh
perf trace: Really free the evsel->priv area
27f396f 
[ Upstream commit 7962ef1 ]

In 3cb4d5e ("perf trace: Free syscall tp fields in
evsel->priv") it only was freeing if strcmp(evsel->tp_format->system,
"syscalls") returned zero, while the corresponding initialization of
evsel->priv was being performed if it was _not_ zero, i.e. if the tp
system wasn't 'syscalls'.

Just stop looking for that and free it if evsel->priv was set, which
should be equivalent.

Also use the pre-existing evsel_trace__delete() function.

This resolves these leaks, detected with:

  $ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin

  =================================================================
  ==481565==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
      #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097)
      #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966)
      #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307
      #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333
      #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458
      #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480
      #6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212
      #7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891
      #8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156
      #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323
      #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377
      #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421
      #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537
      #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
      #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097)
      #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966)
      #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307
      #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333
      #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458
      #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480
      #6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205
      #7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891
      #8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156
      #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323
      #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377
      #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421
      #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537
      #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)

  SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s).
  [root@quaco ~]#

With this we plug all leaks with "perf trace sleep 1".

Fixes: 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv")
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
matrix-wsk pushed a commit that referenced this pull request Sep 20, 2023
@acmel @gregkh
perf top: Don't pass an ERR_PTR() directly to perf_session__delete()
6b66e3a 
[ Upstream commit ef23cb5 ]

While debugging a segfault on 'perf lock contention' without an
available perf.data file I noticed that it was basically calling:

	perf_session__delete(ERR_PTR(-1))

Resulting in:

  (gdb) run lock contention
  Starting program: /root/bin/perf lock contention
  [Thread debugging using libthread_db enabled]
  Using host libthread_db library "/lib64/libthread_db.so.1".
  failed to open perf.data: No such file or directory  (try 'perf record' first)
  Initializing perf session failed

  Program received signal SIGSEGV, Segmentation fault.
  0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
  2858		if (!session->auxtrace)
  (gdb) p session
  $1 = (struct perf_session *) 0xffffffffffffffff
  (gdb) bt
  #0  0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
  #1  0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300
  #2  0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161
  #3  0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604
  #4  0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322
  #5  0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375
  #6  0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419
  #7  0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535
  (gdb)

So just set it to NULL after using PTR_ERR(session) to decode the error
as perf_session__delete(NULL) is supported.

The same problem was found in 'perf top' after an audit of all
perf_session__new() failure handling.

Fixes: 6ef81c5 ("perf session: Return error code for perf_session__new() function on failure")
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jeremie Galarneau <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Mamatha Inamdar <[email protected]>
Cc: Mukesh Ojha <[email protected]>
Cc: Nageswara R Sastry <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Shawn Landden <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tzvetomir Stoyanov <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
matrix-wsk pushed a commit that referenced this pull request Sep 20, 2023
@acmel @gregkh
perf lock: Don't pass an ERR_PTR() directly to perf_session__delete()
b122650 
[ Upstream commit abaf1e0 ]

While debugging a segfault on 'perf lock contention' without an
available perf.data file I noticed that it was basically calling:

	perf_session__delete(ERR_PTR(-1))

Resulting in:

  (gdb) run lock contention
  Starting program: /root/bin/perf lock contention
  [Thread debugging using libthread_db enabled]
  Using host libthread_db library "/lib64/libthread_db.so.1".
  failed to open perf.data: No such file or directory  (try 'perf record' first)
  Initializing perf session failed

  Program received signal SIGSEGV, Segmentation fault.
  0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
  2858		if (!session->auxtrace)
  (gdb) p session
  $1 = (struct perf_session *) 0xffffffffffffffff
  (gdb) bt
  #0  0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
  #1  0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300
  #2  0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161
  #3  0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604
  #4  0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322
  #5  0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375
  #6  0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419
  #7  0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535
  (gdb)

So just set it to NULL after using PTR_ERR(session) to decode the error
as perf_session__delete(NULL) is supported.

Fixes: eef4fee ("perf lock: Dynamically allocate lockhash_table")
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: K Prateek Nayak <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mamatha Inamdar <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Cc: Ross Zwisler <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Cc: Tiezhu Yang <[email protected]>
Cc: Yang Jihong <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
matrix-wsk pushed a commit that referenced this pull request Sep 20, 2023
@q2ven @gregkh
af_unix: Fix data-race around unix_tot_inflight.
afc284a 
[ Upstream commit ade32bd ]

unix_tot_inflight is changed under spin_lock(unix_gc_lock), but
unix_release_sock() reads it locklessly.

Let's use READ_ONCE() for unix_tot_inflight.

Note that the writer side was marked by commit 9d6d7f1 ("af_unix:
annote lockless accesses to unix_tot_inflight & gc_in_progress")

BUG: KCSAN: data-race in unix_inflight / unix_release_sock

write (marked) to 0xffffffff871852b8 of 4 bytes by task 123 on cpu 1:
 unix_inflight+0x130/0x180 net/unix/scm.c:64
 unix_attach_fds+0x137/0x1b0 net/unix/scm.c:123
 unix_scm_to_skb net/unix/af_unix.c:1832 [inline]
 unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1955
 sock_sendmsg_nosec net/socket.c:724 [inline]
 sock_sendmsg+0x148/0x160 net/socket.c:747
 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2493
 ___sys_sendmsg+0xc6/0x140 net/socket.c:2547
 __sys_sendmsg+0x94/0x140 net/socket.c:2576
 __do_sys_sendmsg net/socket.c:2585 [inline]
 __se_sys_sendmsg net/socket.c:2583 [inline]
 __x64_sys_sendmsg+0x45/0x50 net/socket.c:2583
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

read to 0xffffffff871852b8 of 4 bytes by task 4891 on cpu 0:
 unix_release_sock+0x608/0x910 net/unix/af_unix.c:671
 unix_release+0x59/0x80 net/unix/af_unix.c:1058
 __sock_release+0x7d/0x170 net/socket.c:653
 sock_close+0x19/0x30 net/socket.c:1385
 __fput+0x179/0x5e0 fs/file_table.c:321
 ____fput+0x15/0x20 fs/file_table.c:349
 task_work_run+0x116/0x1a0 kernel/task_work.c:179
 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204
 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
 syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297
 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

value changed: 0x00000000 -> 0x00000001

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 4891 Comm: systemd-coredum Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: 9305cfa ("[AF_UNIX]: Make unix_tot_inflight counter non-atomic")
Reported-by: syzkaller <[email protected]>
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
matrix-wsk pushed a commit that referenced this pull request Oct 16, 2023
@biger410 @gregkh
scsi: target: core: Fix deadlock due to recursive locking
5a44dd7 
[ Upstream commit a154f5f ]

The following call trace shows a deadlock issue due to recursive locking of
mutex "device_mutex". First lock acquire is in target_for_each_device() and
second in target_free_device().

 PID: 148266   TASK: ffff8be21ffb5d00  CPU: 10   COMMAND: "iscsi_ttx"
  #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f
  #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224
  #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee
  #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7
  #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3
  #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c
  #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod]
  #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod]
  #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f
  #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583
 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod]
 #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc
 #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod]
 #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod]
 #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod]
 #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod]
 #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07
 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod]
 #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod]
 #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080
 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364

Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion")
Signed-off-by: Junxiao Bi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
matrix-wsk pushed a commit that referenced this pull request Oct 16, 2023
@shayshyi @gregkh
RDMA/mlx5: Fix mkey cache possible deadlock on cleanup
42ec848 
commit 374012b upstream.

Fix the deadlock by refactoring the MR cache cleanup flow to flush the
workqueue without holding the rb_lock.
This adds a race between cache cleanup and creation of new entries which
we solve by denied creation of new entries after cache cleanup started.

Lockdep:
WARNING: possible circular locking dependency detected
 [ 2785.326074 ] 6.2.0-rc6_for_upstream_debug_2023_01_31_14_02 #1 Not tainted
 [ 2785.339778 ] ------------------------------------------------------
 [ 2785.340848 ] devlink/53872 is trying to acquire lock:
 [ 2785.341701 ] ffff888124f8c0c8 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0xc8/0x900
 [ 2785.343403 ]
 [ 2785.343403 ] but task is already holding lock:
 [ 2785.344464 ] ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib]
 [ 2785.346273 ]
 [ 2785.346273 ] which lock already depends on the new lock.
 [ 2785.346273 ]
 [ 2785.347720 ]
 [ 2785.347720 ] the existing dependency chain (in reverse order) is:
 [ 2785.349003 ]
 [ 2785.349003 ] -> #1 (&dev->cache.rb_lock){+.+.}-{3:3}:
 [ 2785.350160 ]        __mutex_lock+0x14c/0x15c0
 [ 2785.350962 ]        delayed_cache_work_func+0x2d1/0x610 [mlx5_ib]
 [ 2785.352044 ]        process_one_work+0x7c2/0x1310
 [ 2785.352879 ]        worker_thread+0x59d/0xec0
 [ 2785.353636 ]        kthread+0x28f/0x330
 [ 2785.354370 ]        ret_from_fork+0x1f/0x30
 [ 2785.355135 ]
 [ 2785.355135 ] -> #0 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}:
 [ 2785.356515 ]        __lock_acquire+0x2d8a/0x5fe0
 [ 2785.357349 ]        lock_acquire+0x1c1/0x540
 [ 2785.358121 ]        __flush_work+0xe8/0x900
 [ 2785.358852 ]        __cancel_work_timer+0x2c7/0x3f0
 [ 2785.359711 ]        mlx5_mkey_cache_cleanup+0xfb/0x250 [mlx5_ib]
 [ 2785.360781 ]        mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x16/0x30 [mlx5_ib]
 [ 2785.361969 ]        __mlx5_ib_remove+0x68/0x120 [mlx5_ib]
 [ 2785.362960 ]        mlx5r_remove+0x63/0x80 [mlx5_ib]
 [ 2785.363870 ]        auxiliary_bus_remove+0x52/0x70
 [ 2785.364715 ]        device_release_driver_internal+0x3c1/0x600
 [ 2785.365695 ]        bus_remove_device+0x2a5/0x560
 [ 2785.366525 ]        device_del+0x492/0xb80
 [ 2785.367276 ]        mlx5_detach_device+0x1a9/0x360 [mlx5_core]
 [ 2785.368615 ]        mlx5_unload_one_devl_locked+0x5a/0x110 [mlx5_core]
 [ 2785.369934 ]        mlx5_devlink_reload_down+0x292/0x580 [mlx5_core]
 [ 2785.371292 ]        devlink_reload+0x439/0x590
 [ 2785.372075 ]        devlink_nl_cmd_reload+0xaef/0xff0
 [ 2785.372973 ]        genl_family_rcv_msg_doit.isra.0+0x1bd/0x290
 [ 2785.374011 ]        genl_rcv_msg+0x3ca/0x6c0
 [ 2785.374798 ]        netlink_rcv_skb+0x12c/0x360
 [ 2785.375612 ]        genl_rcv+0x24/0x40
 [ 2785.376295 ]        netlink_unicast+0x438/0x710
 [ 2785.377121 ]        netlink_sendmsg+0x7a1/0xca0
 [ 2785.377926 ]        sock_sendmsg+0xc5/0x190
 [ 2785.378668 ]        __sys_sendto+0x1bc/0x290
 [ 2785.379440 ]        __x64_sys_sendto+0xdc/0x1b0
 [ 2785.380255 ]        do_syscall_64+0x3d/0x90
 [ 2785.381031 ]        entry_SYSCALL_64_after_hwframe+0x46/0xb0
 [ 2785.381967 ]
 [ 2785.381967 ] other info that might help us debug this:
 [ 2785.381967 ]
 [ 2785.383448 ]  Possible unsafe locking scenario:
 [ 2785.383448 ]
 [ 2785.384544 ]        CPU0                    CPU1
 [ 2785.385383 ]        ----                    ----
 [ 2785.386193 ]   lock(&dev->cache.rb_lock);
 [ 2785.386940 ]				lock((work_completion)(&(&ent->dwork)->work));
 [ 2785.388327 ]				lock(&dev->cache.rb_lock);
 [ 2785.389425 ]   lock((work_completion)(&(&ent->dwork)->work));
 [ 2785.390414 ]
 [ 2785.390414 ]  *** DEADLOCK ***
 [ 2785.390414 ]
 [ 2785.391579 ] 6 locks held by devlink/53872:
 [ 2785.392341 ]  #0: ffffffff84c17a50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40
 [ 2785.393630 ]  #1: ffff888142280218 (&devlink->lock_key){+.+.}-{3:3}, at: devlink_get_from_attrs_lock+0x12d/0x2d0
 [ 2785.395324 ]  #2: ffff8881422d3c38 (&dev->lock_key){+.+.}-{3:3}, at: mlx5_unload_one_devl_locked+0x4a/0x110 [mlx5_core]
 [ 2785.397322 ]  #3: ffffffffa0e59068 (mlx5_intf_mutex){+.+.}-{3:3}, at: mlx5_detach_device+0x60/0x360 [mlx5_core]
 [ 2785.399231 ]  #4: ffff88810e3cb0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600
 [ 2785.400864 ]  #5: ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib]

Fixes: b958451 ("RDMA/mlx5: Change the cache structure to an RB-tree")
Signed-off-by: Shay Drory <[email protected]>
Signed-off-by: Michael Guralnik <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
matrix-wsk pushed a commit that referenced this pull request Oct 26, 2023
@ctmarinas @gregkh
mm: slab: Do not create kmalloc caches smaller than arch_slab_minalign()
40cadbc 
commit c15cdea upstream.

Commit b035f5a ("mm: slab: reduce the kmalloc() minimum alignment
if DMA bouncing possible") allows architectures with non-coherent DMA to
define a small ARCH_KMALLOC_MINALIGN (e.g. sizeof(unsigned long long))
and this has been enabled on arm64. With KASAN_HW_TAGS enabled, however,
ARCH_SLAB_MINALIGN becomes 16 on arm64 (arch_slab_minalign() dynamically
selects it since commit d949a81 ("mm: make minimum slab alignment a
runtime property")). This can lead to a situation where kmalloc-8 caches
are attempted to be created with a kmem_caches.size aligned to 16. When
the cache is mergeable, it can lead to kernel warnings like:

sysfs: cannot create duplicate filename '/kernel/slab/:d-0000016'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.0-rc1-00001-gda98843cd306-dirty #5
Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
 dump_backtrace+0x90/0xe8
 show_stack+0x18/0x24
 dump_stack_lvl+0x48/0x60
 dump_stack+0x18/0x24
 sysfs_warn_dup+0x64/0x80
 sysfs_create_dir_ns+0xe8/0x108
 kobject_add_internal+0x98/0x264
 kobject_init_and_add+0x8c/0xd8
 sysfs_slab_add+0x12c/0x248
 slab_sysfs_init+0x98/0x14c
 do_one_initcall+0x6c/0x1b0
 kernel_init_freeable+0x1c0/0x288
 kernel_init+0x24/0x1e0
 ret_from_fork+0x10/0x20
kobject: kobject_add_internal failed for :d-0000016 with -EEXIST, don't try to register things with the same name in the same directory.
SLUB: Unable to add boot slab dma-kmalloc-8 to sysfs

Limit the __kmalloc_minalign() return value (used to create the
kmalloc-* caches) to arch_slab_minalign() so that kmalloc-8 caches are
skipped when KASAN_HW_TAGS is enabled (both config and runtime).

Reported-by: Mark Rutland <[email protected]>
Fixes: b035f5a ("mm: slab: reduce the kmalloc() minimum alignment if DMA bouncing possible")
Signed-off-by: Catalin Marinas <[email protected]>
Cc: Peter Collingbourne <[email protected]>
Cc: [email protected] # 6.5.x
Signed-off-by: Vlastimil Babka <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
matrix-wsk pushed a commit that referenced this pull request Nov 21, 2023
@captain5050 @gregkh
perf stat: Fix aggr mode initialization
4b9d563 
[ Upstream commit a84fbf2 ]

Generating metrics llc_code_read_mpi_demand_plus_prefetch,
llc_data_read_mpi_demand_plus_prefetch,
llc_miss_local_memory_bandwidth_read,
llc_miss_local_memory_bandwidth_write,
nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read,
memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw,
C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency,
C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency,
C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would
trigger an address sanitizer heap-buffer-overflows on a SkylakeX.

```
==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98
READ of size 4 at 0x5020003eee78 thread T0
    #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12
    #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6
    #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9
    #3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31
    #4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18
    #5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3
    #6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5
    #7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2
    #8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3
    #9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11
    #10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8
    #11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2
    #12 0x558265bb9389 in main tools/perf/perf.c:537:3
```

The issue was the use of testing a cpumap with NULL rather than using
empty, as a map containing the dummy value isn't NULL and the -1
results in an empty aggr map being allocated which legitimately
overflows when any member is accessed.

Fixes: 8a96f45 ("perf stat: Avoid SEGV if core.cpus isn't set")
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
matrix-wsk pushed a commit that referenced this pull request Nov 21, 2023
@captain5050 @gregkh
perf parse-events: Fix tracepoint name memory leak
e3c2dc9 
[ Upstream commit ede72dc ]

Fuzzing found that an invalid tracepoint name would create a memory
leak with an address sanitizer build:
```
$ perf stat -e '*:o/' true
event syntax error: '*:o/'
                       \___ parser error
Run 'perf list' for a list of valid events

 Usage: perf stat [<options>] [<command>]

    -e, --event <event>   event selector. use 'perf list' to list available events

=================================================================
==59380==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 4 byte(s) in 2 object(s) allocated from:
    #0 0x7f38ac07077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439
    #1 0x55f2f41be73b in str util/parse-events.l:49
    #2 0x55f2f41d08e8 in parse_events_lex util/parse-events.l:338
    #3 0x55f2f41dc3b1 in parse_events_parse util/parse-events-bison.c:1464
    #4 0x55f2f410b8b3 in parse_events__scanner util/parse-events.c:1822
    #5 0x55f2f410d1b9 in __parse_events util/parse-events.c:2094
    #6 0x55f2f410e57f in parse_events_option util/parse-events.c:2279
    #7 0x55f2f4427b56 in get_value tools/lib/subcmd/parse-options.c:251
    #8 0x55f2f4428d98 in parse_short_opt tools/lib/subcmd/parse-options.c:351
    #9 0x55f2f4429d80 in parse_options_step tools/lib/subcmd/parse-options.c:539
    #10 0x55f2f442acb9 in parse_options_subcommand tools/lib/subcmd/parse-options.c:654
    #11 0x55f2f3ec99fc in cmd_stat tools/perf/builtin-stat.c:2501
    #12 0x55f2f4093289 in run_builtin tools/perf/perf.c:322
    #13 0x55f2f40937f5 in handle_internal_command tools/perf/perf.c:375
    #14 0x55f2f4093bbd in run_argv tools/perf/perf.c:419
    #15 0x55f2f409412b in main tools/perf/perf.c:535

SUMMARY: AddressSanitizer: 4 byte(s) leaked in 2 allocation(s).
```
Fix by adding the missing destructor.

Fixes: 865582c ("perf tools: Adds the tracepoint name parsing support")
Signed-off-by: Ian Rogers <[email protected]>
Cc: He Kuang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
matrix-wsk pushed a commit that referenced this pull request Nov 21, 2023
@captain5050 @gregkh
perf stat: Fix aggr mode initialization
89ad251 
[ Upstream commit a84fbf2 ]

Generating metrics llc_code_read_mpi_demand_plus_prefetch,
llc_data_read_mpi_demand_plus_prefetch,
llc_miss_local_memory_bandwidth_read,
llc_miss_local_memory_bandwidth_write,
nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read,
memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw,
C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency,
C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency,
C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would
trigger an address sanitizer heap-buffer-overflows on a SkylakeX.

```
==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98
READ of size 4 at 0x5020003eee78 thread T0
    #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12
    #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6
    #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9
    #3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31
    #4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18
    #5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3
    #6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5
    #7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2
    #8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3
    #9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11
    #10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8
    #11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2
    #12 0x558265bb9389 in main tools/perf/perf.c:537:3
```

The issue was the use of testing a cpumap with NULL rather than using
empty, as a map containing the dummy value isn't NULL and the -1
results in an empty aggr map being allocated which legitimately
overflows when any member is accessed.

Fixes: 8a96f45 ("perf stat: Avoid SEGV if core.cpus isn't set")
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
matrix-wsk pushed a commit that referenced this pull request Nov 21, 2023
@captain5050 @gregkh
perf parse-events: Fix tracepoint name memory leak
ad3fa6c 
[ Upstream commit ede72dc ]

Fuzzing found that an invalid tracepoint name would create a memory
leak with an address sanitizer build:
```
$ perf stat -e '*:o/' true
event syntax error: '*:o/'
                       \___ parser error
Run 'perf list' for a list of valid events

 Usage: perf stat [<options>] [<command>]

    -e, --event <event>   event selector. use 'perf list' to list available events

=================================================================
==59380==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 4 byte(s) in 2 object(s) allocated from:
    #0 0x7f38ac07077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439
    #1 0x55f2f41be73b in str util/parse-events.l:49
    #2 0x55f2f41d08e8 in parse_events_lex util/parse-events.l:338
    #3 0x55f2f41dc3b1 in parse_events_parse util/parse-events-bison.c:1464
    #4 0x55f2f410b8b3 in parse_events__scanner util/parse-events.c:1822
    #5 0x55f2f410d1b9 in __parse_events util/parse-events.c:2094
    #6 0x55f2f410e57f in parse_events_option util/parse-events.c:2279
    #7 0x55f2f4427b56 in get_value tools/lib/subcmd/parse-options.c:251
    #8 0x55f2f4428d98 in parse_short_opt tools/lib/subcmd/parse-options.c:351
    #9 0x55f2f4429d80 in parse_options_step tools/lib/subcmd/parse-options.c:539
    #10 0x55f2f442acb9 in parse_options_subcommand tools/lib/subcmd/parse-options.c:654
    #11 0x55f2f3ec99fc in cmd_stat tools/perf/builtin-stat.c:2501
    #12 0x55f2f4093289 in run_builtin tools/perf/perf.c:322
    #13 0x55f2f40937f5 in handle_internal_command tools/perf/perf.c:375
    #14 0x55f2f4093bbd in run_argv tools/perf/perf.c:419
    #15 0x55f2f409412b in main tools/perf/perf.c:535

SUMMARY: AddressSanitizer: 4 byte(s) leaked in 2 allocation(s).
```
Fix by adding the missing destructor.

Fixes: 865582c ("perf tools: Adds the tracepoint name parsing support")
Signed-off-by: Ian Rogers <[email protected]>
Cc: He Kuang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
matrix-wsk pushed a commit that referenced this pull request Dec 14, 2023
@gregkh
nvme: check for valid nvme_identify_ns() before using it
2bda53c 
commit d8b90d6 upstream.

When scanning namespaces, it is possible to get valid data from the first
call to nvme_identify_ns() in nvme_alloc_ns(), but not from the second
call in nvme_update_ns_info_block().  In particular, if the NSID becomes
inactive between the two commands, a storage device may return a buffer
filled with zero as per 4.1.5.1.  In this case, we can get a kernel crash
due to a divide-by-zero in blk_stack_limits() because ns->lba_shift will
be set to zero.

PID: 326      TASK: ffff95fec3cd8000  CPU: 29   COMMAND: "kworker/u98:10"
 #0 [ffffad8f8702f9e0] machine_kexec at ffffffff91c76ec7
 #1 [ffffad8f8702fa38] __crash_kexec at ffffffff91dea4fa
 #2 [ffffad8f8702faf8] crash_kexec at ffffffff91deb788
 #3 [ffffad8f8702fb00] oops_end at ffffffff91c2e4bb
 #4 [ffffad8f8702fb20] do_trap at ffffffff91c2a4ce
 #5 [ffffad8f8702fb70] do_error_trap at ffffffff91c2a595
 #6 [ffffad8f8702fbb0] exc_divide_error at ffffffff928506e6
 #7 [ffffad8f8702fbd0] asm_exc_divide_error at ffffffff92a00926
    [exception RIP: blk_stack_limits+434]
    RIP: ffffffff92191872  RSP: ffffad8f8702fc80  RFLAGS: 00010246
    RAX: 0000000000000000  RBX: ffff95efa0c91800  RCX: 0000000000000001
    RDX: 0000000000000000  RSI: 0000000000000001  RDI: 0000000000000001
    RBP: 00000000ffffffff   R8: ffff95fec7df35a8   R9: 0000000000000000
    R10: 0000000000000000  R11: 0000000000000001  R12: 0000000000000000
    R13: 0000000000000000  R14: 0000000000000000  R15: ffff95fed33c09a8
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #8 [ffffad8f8702fce0] nvme_update_ns_info_block at ffffffffc06d3533 [nvme_core]
 #9 [ffffad8f8702fd18] nvme_scan_ns at ffffffffc06d6fa7 [nvme_core]

This happened when the check for valid data was moved out of nvme_identify_ns()
into one of the callers.  Fix this by checking in both callers.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=218186
Fixes: 0dd6fff ("nvme: bring back auto-removal of deleted namespaces during sequential scan")
Cc: [email protected]
Signed-off-by: Ewan D. Milne <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
matrix-wsk pushed a commit that referenced this pull request Dec 14, 2023
@gregkh
RDMA/irdma: Avoid free the non-cqp_request scratch
fc05413 
[ Upstream commit e3e82fc ]

When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a
cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when
removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be
dereferenced as wrong struct in irdma_free_pending_cqp_request().

  PID: 3669   TASK: ffff88aef892c000  CPU: 28  COMMAND: "kworker/28:0"
   #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34
   #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2
   #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f
   #3 [fffffe0000549eb8] do_nmi at ffffffff81079582
   #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4
      [exception RIP: native_queued_spin_lock_slowpath+1291]
      RIP: ffffffff8127e72b  RSP: ffff88aa841ef778  RFLAGS: 00000046
      RAX: 0000000000000000  RBX: ffff88b01f849700  RCX: ffffffff8127e47e
      RDX: 0000000000000000  RSI: 0000000000000004  RDI: ffffffff83857ec0
      RBP: ffff88afe3e4efc8   R8: ffffed15fc7c9dfa   R9: ffffed15fc7c9dfa
      R10: 0000000000000001  R11: ffffed15fc7c9df9  R12: 0000000000740000
      R13: ffff88b01f849708  R14: 0000000000000003  R15: ffffed1603f092e1
      ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0000
  -- <NMI exception stack> --
   #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b
   #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4
   #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363
   #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma]
   #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma]
   #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma]
   #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma]
   #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb
   #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6
   #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278
   #15 [ffff88aa841efb88] device_del at ffffffff82179d23
   #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice]
   #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice]
   #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a
   #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff
   #20 [ffff88aa841eff10] kthread at ffffffff811d87a0
   #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f

Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions")
Link: https://lore.kernel.org/r/[email protected]
Suggested-by: "Ismail, Mustafa" <[email protected]>
Signed-off-by: Shifeng Li <[email protected]>
Reviewed-by: Shiraz Saleem <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
matrix-wsk pushed a commit that referenced this pull request Dec 14, 2023
@hkallweit @gregkh
leds: trigger: netdev: fix RTNL handling to prevent potential deadlock
3c0adff 
commit fe2b122 upstream.

When working on LED support for r8169 I got the following lockdep
warning. Easiest way to prevent this scenario seems to be to take
the RTNL lock before the trigger_data lock in set_device_name().

======================================================
WARNING: possible circular locking dependency detected
6.7.0-rc2-next-20231124+ #2 Not tainted
------------------------------------------------------
bash/383 is trying to acquire lock:
ffff888103aa1c68 (&trigger_data->lock){+.+.}-{3:3}, at: netdev_trig_notify+0xec/0x190 [ledtrig_netdev]

but task is already holding lock:
ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (rtnl_mutex){+.+.}-{3:3}:
       __mutex_lock+0x9b/0xb50
       mutex_lock_nested+0x16/0x20
       rtnl_lock+0x12/0x20
       set_device_name+0xa9/0x120 [ledtrig_netdev]
       netdev_trig_activate+0x1a1/0x230 [ledtrig_netdev]
       led_trigger_set+0x172/0x2c0
       led_trigger_write+0xf1/0x140
       sysfs_kf_bin_write+0x5d/0x80
       kernfs_fop_write_iter+0x15d/0x210
       vfs_write+0x1f0/0x510
       ksys_write+0x6c/0xf0
       __x64_sys_write+0x14/0x20
       do_syscall_64+0x3f/0xf0
       entry_SYSCALL_64_after_hwframe+0x6c/0x74

-> #0 (&trigger_data->lock){+.+.}-{3:3}:
       __lock_acquire+0x1459/0x25a0
       lock_acquire+0xc8/0x2d0
       __mutex_lock+0x9b/0xb50
       mutex_lock_nested+0x16/0x20
       netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
       call_netdevice_register_net_notifiers+0x5a/0x100
       register_netdevice_notifier+0x85/0x120
       netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev]
       led_trigger_set+0x172/0x2c0
       led_trigger_write+0xf1/0x140
       sysfs_kf_bin_write+0x5d/0x80
       kernfs_fop_write_iter+0x15d/0x210
       vfs_write+0x1f0/0x510
       ksys_write+0x6c/0xf0
       __x64_sys_write+0x14/0x20
       do_syscall_64+0x3f/0xf0
       entry_SYSCALL_64_after_hwframe+0x6c/0x74

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(rtnl_mutex);
                               lock(&trigger_data->lock);
                               lock(rtnl_mutex);
  lock(&trigger_data->lock);

 *** DEADLOCK ***

8 locks held by bash/383:
 #0: ffff888103ff33f0 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x6c/0xf0
 #1: ffff888103aa1e88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x114/0x210
 #2: ffff8881036f1890 (kn->active#82){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x11d/0x210
 #3: ffff888108e2c358 (&led_cdev->led_access){+.+.}-{3:3}, at: led_trigger_write+0x30/0x140
 #4: ffffffff8cdd9e10 (triggers_list_lock){++++}-{3:3}, at: led_trigger_write+0x75/0x140
 #5: ffff888108e2c270 (&led_cdev->trigger_lock){++++}-{3:3}, at: led_trigger_write+0xe3/0x140
 #6: ffffffff8cdde3d0 (pernet_ops_rwsem){++++}-{3:3}, at: register_netdevice_notifier+0x1c/0x120
 #7: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20

stack backtrace:
CPU: 0 PID: 383 Comm: bash Not tainted 6.7.0-rc2-next-20231124+ #2
Hardware name: Default string Default string/Default string, BIOS ADLN.M6.SODIMM.ZB.CY.015 08/08/2023
Call Trace:
 <TASK>
 dump_stack_lvl+0x5c/0xd0
 dump_stack+0x10/0x20
 print_circular_bug+0x2dd/0x410
 check_noncircular+0x131/0x150
 __lock_acquire+0x1459/0x25a0
 lock_acquire+0xc8/0x2d0
 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
 __mutex_lock+0x9b/0xb50
 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
 ? __this_cpu_preempt_check+0x13/0x20
 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
 ? __cancel_work_timer+0x11c/0x1b0
 ? __mutex_lock+0x123/0xb50
 mutex_lock_nested+0x16/0x20
 ? mutex_lock_nested+0x16/0x20
 netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
 call_netdevice_register_net_notifiers+0x5a/0x100
 register_netdevice_notifier+0x85/0x120
 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev]
 led_trigger_set+0x172/0x2c0
 ? preempt_count_add+0x49/0xc0
 led_trigger_write+0xf1/0x140
 sysfs_kf_bin_write+0x5d/0x80
 kernfs_fop_write_iter+0x15d/0x210
 vfs_write+0x1f0/0x510
 ksys_write+0x6c/0xf0
 __x64_sys_write+0x14/0x20
 do_syscall_64+0x3f/0xf0
 entry_SYSCALL_64_after_hwframe+0x6c/0x74
RIP: 0033:0x7f269055d034
Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d 35 c3 0d 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48
RSP: 002b:00007ffddb7ef748 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 00007f269055d034
RDX: 0000000000000007 RSI: 000055bf5f4af3c0 RDI: 0000000000000001
RBP: 000055bf5f4af3c0 R08: 0000000000000073 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000007
R13: 00007f26906325c0 R14: 00007f269062ff20 R15: 0000000000000000
 </TASK>

Fixes: d5e0126 ("leds: trigger: netdev: add additional specific link speed mode")
Cc: [email protected]
Signed-off-by: Heiner Kallweit <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Acked-by: Lee Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
matrix-wsk pushed a commit that referenced this pull request Jan 4, 2024
@Tropicao @gregkh
pinctrl: at91-pio4: use dedicated lock class for IRQ
3ccefda 
[ Upstream commit 1469417 ]

Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep
warning:

 ============================================
 WARNING: possible recursive locking detected
 6.7.0-rc5-wt+ #532 Not tainted
 --------------------------------------------
 sh/92 is trying to acquire lock:
 c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100

 but task is already holding lock:
 c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&irq_desc_lock_class);
   lock(&irq_desc_lock_class);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 6 locks held by sh/92:
  #0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178
  #1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284
  #2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284
  #3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8
  #4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c
  #5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100

 stack backtrace:
 CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532
 Hardware name: Atmel SAMA5
  unwind_backtrace from show_stack+0x18/0x1c
  show_stack from dump_stack_lvl+0x34/0x48
  dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c
  __lock_acquire from lock_acquire.part.0+0x124/0x2d0
  lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78
  _raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100
  __irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204
  irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4
  atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204
  irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8
  gpio_keys_suspend from dpm_run_callback+0xe4/0x248
  dpm_run_callback from __device_suspend+0x234/0x91c
  __device_suspend from dpm_suspend+0x224/0x43c
  dpm_suspend from dpm_suspend_start+0x9c/0xa8
  dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84
  suspend_devices_and_enter from pm_suspend+0x460/0x4e8
  pm_suspend from state_store+0x78/0xe4
  state_store from kernfs_fop_write_iter+0x1a0/0x284
  kernfs_fop_write_iter from vfs_write+0x38c/0x6f4
  vfs_write from ksys_write+0xd8/0x178
  ksys_write from ret_fast_syscall+0x0/0x1c
 Exception stack(0xc52b3fa8 to 0xc52b3ff0)
 3fa0:                   00000004 005a0ae8 00000001 005a0ae8 00000004 00000001
 3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190
 3fe0: 00000004 b6c61678 aec5a041 aebf1a26

This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever
a wake up source configures an IRQ through irq_set_irq_wake, it will
lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent"
IRQ which will do the same on its own IRQ desc, but since those two locks
share the same class, lockdep reports this as an issue.

Fix lockdep false positive by setting a different class for parent and
children IRQ

Fixes: 7761808 ("pinctrl: introduce driver for Atmel PIO4 controller")
Signed-off-by: Alexis Lothoré <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
matrix-wsk pushed a commit that referenced this pull request Jan 4, 2024
@gregkh
smb: client: fix OOB in cifsd when receiving compounded resps
c0e98de 
commit a8f68b1 upstream.

Validate next header's offset in ->next_header() so that it isn't
smaller than MID_HEADER_SIZE(server) and then standard_receive3() or
->receive() ends up writing off the end of the buffer because
'pdu_length - MID_HEADER_SIZE(server)' wraps up to a huge length:

  BUG: KASAN: slab-out-of-bounds in _copy_to_iter+0x4fc/0x840
  Write of size 701 at addr ffff88800caf407f by task cifsd/1090

  CPU: 0 PID: 1090 Comm: cifsd Not tainted 6.7.0-rc4 #5
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
  rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x4a/0x80
   print_report+0xcf/0x650
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? __phys_addr+0x46/0x90
   kasan_report+0xd8/0x110
   ? _copy_to_iter+0x4fc/0x840
   ? _copy_to_iter+0x4fc/0x840
   kasan_check_range+0x105/0x1b0
   __asan_memcpy+0x3c/0x60
   _copy_to_iter+0x4fc/0x840
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? hlock_class+0x32/0xc0
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? __pfx__copy_to_iter+0x10/0x10
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? lock_is_held_type+0x90/0x100
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? __might_resched+0x278/0x360
   ? __pfx___might_resched+0x10/0x10
   ? srso_alias_return_thunk+0x5/0xfbef5
   __skb_datagram_iter+0x2c2/0x460
   ? __pfx_simple_copy_to_iter+0x10/0x10
   skb_copy_datagram_iter+0x6c/0x110
   tcp_recvmsg_locked+0x9be/0xf40
   ? __pfx_tcp_recvmsg_locked+0x10/0x10
   ? mark_held_locks+0x5d/0x90
   ? srso_alias_return_thunk+0x5/0xfbef5
   tcp_recvmsg+0xe2/0x310
   ? __pfx_tcp_recvmsg+0x10/0x10
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? lock_acquire+0x14a/0x3a0
   ? srso_alias_return_thunk+0x5/0xfbef5
   inet_recvmsg+0xd0/0x370
   ? __pfx_inet_recvmsg+0x10/0x10
   ? __pfx_lock_release+0x10/0x10
   ? do_raw_spin_trylock+0xd1/0x120
   sock_recvmsg+0x10d/0x150
   cifs_readv_from_socket+0x25a/0x490 [cifs]
   ? __pfx_cifs_readv_from_socket+0x10/0x10 [cifs]
   ? srso_alias_return_thunk+0x5/0xfbef5
   cifs_read_from_socket+0xb5/0x100 [cifs]
   ? __pfx_cifs_read_from_socket+0x10/0x10 [cifs]
   ? __pfx_lock_release+0x10/0x10
   ? do_raw_spin_trylock+0xd1/0x120
   ? _raw_spin_unlock+0x23/0x40
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? __smb2_find_mid+0x126/0x230 [cifs]
   cifs_demultiplex_thread+0xd39/0x1270 [cifs]
   ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs]
   ? __pfx_lock_release+0x10/0x10
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? mark_held_locks+0x1a/0x90
   ? lockdep_hardirqs_on_prepare+0x136/0x210
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? __kthread_parkme+0xce/0xf0
   ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs]
   kthread+0x18d/0x1d0
   ? kthread+0xdb/0x1d0
   ? __pfx_kthread+0x10/0x10
   ret_from_fork+0x34/0x60
   ? __pfx_kthread+0x10/0x10
   ret_from_fork_asm+0x1b/0x30
   </TASK>

Fixes: 8ce79ec ("cifs: update multiplex loop to handle compounded responses")
Cc: [email protected]
Reported-by: Robert Morris <[email protected]>
Signed-off-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
matrix-wsk pushed a commit that referenced this pull request Jan 4, 2024
@gregkh
smb: client: fix OOB in SMB2_query_info_init()
3b5f0d0 
commit 33eae65 upstream.

A small CIFS buffer (448 bytes) isn't big enough to hold
SMB2_QUERY_INFO request along with user's input data from
CIFS_QUERY_INFO ioctl.  That is, if the user passed an input buffer >
344 bytes, the client will memcpy() off the end of @req->Buffer in
SMB2_query_info_init() thus causing the following KASAN splat:

  BUG: KASAN: slab-out-of-bounds in SMB2_query_info_init+0x242/0x250 [cifs]
  Write of size 1023 at addr ffff88801308c5a8 by task a.out/1240

  CPU: 1 PID: 1240 Comm: a.out Not tainted 6.7.0-rc4 #5
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
  rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x4a/0x80
   print_report+0xcf/0x650
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? __phys_addr+0x46/0x90
   kasan_report+0xd8/0x110
   ? SMB2_query_info_init+0x242/0x250 [cifs]
   ? SMB2_query_info_init+0x242/0x250 [cifs]
   kasan_check_range+0x105/0x1b0
   __asan_memcpy+0x3c/0x60
   SMB2_query_info_init+0x242/0x250 [cifs]
   ? __pfx_SMB2_query_info_init+0x10/0x10 [cifs]
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? smb_rqst_len+0xa6/0xc0 [cifs]
   smb2_ioctl_query_info+0x4f4/0x9a0 [cifs]
   ? __pfx_smb2_ioctl_query_info+0x10/0x10 [cifs]
   ? __pfx_cifsConvertToUTF16+0x10/0x10 [cifs]
   ? kasan_set_track+0x25/0x30
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? __kasan_kmalloc+0x8f/0xa0
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? cifs_strndup_to_utf16+0x12d/0x1a0 [cifs]
   ? __build_path_from_dentry_optional_prefix+0x19d/0x2d0 [cifs]
   ? __pfx_smb2_ioctl_query_info+0x10/0x10 [cifs]
   cifs_ioctl+0x11c7/0x1de0 [cifs]
   ? __pfx_cifs_ioctl+0x10/0x10 [cifs]
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? rcu_is_watching+0x23/0x50
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? __rseq_handle_notify_resume+0x6cd/0x850
   ? __pfx___schedule+0x10/0x10
   ? blkcg_iostat_update+0x250/0x290
   ? srso_alias_return_thunk+0x5/0xfbef5
   ? ksys_write+0xe9/0x170
   __x64_sys_ioctl+0xc9/0x100
   do_syscall_64+0x47/0xf0
   entry_SYSCALL_64_after_hwframe+0x6f/0x77
  RIP: 0033:0x7f893dde49cf
  Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48
  89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89>
  c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00 00
  RSP: 002b:00007ffc03ff4160 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 00007ffc03ff4378 RCX: 00007f893dde49cf
  RDX: 00007ffc03ff41d0 RSI: 00000000c018cf07 RDI: 0000000000000003
  RBP: 00007ffc03ff4260 R08: 0000000000000410 R09: 0000000000000001
  R10: 00007f893dce7300 R11: 0000000000000246 R12: 0000000000000000
  R13: 00007ffc03ff4388 R14: 00007f893df15000 R15: 0000000000406de0
   </TASK>

Fix this by increasing size of SMB2_QUERY_INFO request buffers and
validating input length to prevent other callers from overflowing @Req
in SMB2_query_info_init() as well.

Fixes: f5b05d6 ("cifs: add IOCTL for QUERY_INFO passthrough to userspace")
Cc: [email protected]
Reported-by: Robert Morris <[email protected]>
Signed-off-by: Paulo Alcantara <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
matrix-wsk pushed a commit to matrix-wsk/kernel-6.6 that referenced this pull request Feb 23, 2024
@gregkh
kernfs: convert kernfs_idr_lock to an irq safe raw spinlock
3058183 
commit c312828 upstream.

bpf_cgroup_from_id() is basically a wrapper to cgroup_get_from_id(),
that is relying on kernfs to determine the right cgroup associated to
the target id.

As a kfunc, it has the potential to be attached to any function through
BPF, particularly in contexts where certain locks are held.

However, kernfs is not using an irq safe spinlock for kernfs_idr_lock,
that means any kernfs function that is acquiring this lock can be
interrupted and potentially hit bpf_cgroup_from_id() in the process,
triggering a deadlock.

For example, it is really easy to trigger a lockdep splat between
kernfs_idr_lock and rq->_lock, attaching a small BPF program to
__set_cpus_allowed_ptr_locked() that just calls bpf_cgroup_from_id():

 =====================================================
 WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
 6.7.0-rc7-virtme deepin-community#5 Not tainted
 -----------------------------------------------------
 repro/131 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
 ffffffffb2dc4578 (kernfs_idr_lock){+.+.}-{2:2}, at: kernfs_find_and_get_node_by_id+0x1d/0x80

 and this task is already holding:
 ffff911cbecaf218 (&rq->__lock){-.-.}-{2:2}, at: task_rq_lock+0x50/0xc0
 which would create a new lock dependency:
  (&rq->__lock){-.-.}-{2:2} -> (kernfs_idr_lock){+.+.}-{2:2}

 but this new dependency connects a HARDIRQ-irq-safe lock:
  (&rq->__lock){-.-.}-{2:2}

 ... which became HARDIRQ-irq-safe at:
   lock_acquire+0xbf/0x2b0
   _raw_spin_lock_nested+0x2e/0x40
   scheduler_tick+0x5d/0x170
   update_process_times+0x9c/0xb0
   tick_periodic+0x27/0xe0
   tick_handle_periodic+0x24/0x70
   __sysvec_apic_timer_interrupt+0x64/0x1a0
   sysvec_apic_timer_interrupt+0x6f/0x80
   asm_sysvec_apic_timer_interrupt+0x1a/0x20
   memcpy+0xc/0x20
   arch_dup_task_struct+0x15/0x30
   copy_process+0x1ce/0x1eb0
   kernel_clone+0xac/0x390
   kernel_thread+0x6f/0xa0
   kthreadd+0x199/0x230
   ret_from_fork+0x31/0x50
   ret_from_fork_asm+0x1b/0x30

 to a HARDIRQ-irq-unsafe lock:
  (kernfs_idr_lock){+.+.}-{2:2}

 ... which became HARDIRQ-irq-unsafe at:
 ...
   lock_acquire+0xbf/0x2b0
   _raw_spin_lock+0x30/0x40
   __kernfs_new_node.isra.0+0x83/0x280
   kernfs_create_root+0xf6/0x1d0
   sysfs_init+0x1b/0x70
   mnt_init+0xd9/0x2a0
   vfs_caches_init+0xcf/0xe0
   start_kernel+0x58a/0x6a0
   x86_64_start_reservations+0x18/0x30
   x86_64_start_kernel+0xc5/0xe0
   secondary_startup_64_no_verify+0x178/0x17b

 other info that might help us debug this:

  Possible interrupt unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(kernfs_idr_lock);
                                local_irq_disable();
                                lock(&rq->__lock);
                                lock(kernfs_idr_lock);
   <Interrupt>
     lock(&rq->__lock);

  *** DEADLOCK ***

Prevent this deadlock condition converting kernfs_idr_lock to a raw irq
safe spinlock.

The performance impact of this change should be negligible and it also
helps to prevent similar deadlock conditions with any other subsystems
that may depend on kernfs.

Fixes: 332ea1f ("bpf: Add bpf_cgroup_from_id() kfunc")
Cc: stable <[email protected]>
Signed-off-by: Andrea Righi <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
matrix-wsk pushed a commit to matrix-wsk/kernel-6.6 that referenced this pull request Feb 23, 2024
@gregkh
libbpf: Fix NULL pointer dereference in bpf_object__collect_prog_relos
5f3e436 
[ Upstream commit fc3a553 ]

An issue occurred while reading an ELF file in libbpf.c during fuzzing:

	Program received signal SIGSEGV, Segmentation fault.
	0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206
	4206 in libbpf.c
	(gdb) bt
	#0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206
	deepin-community#1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706
	deepin-community#2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437
	deepin-community#3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497
	deepin-community#4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16
	deepin-community#5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one ()
	deepin-community#6 0x000000000087ad92 in tracing::span::Span::in_scope ()
	deepin-community#7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir ()
	deepin-community#8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} ()
	deepin-community#9 0x00000000005f2601 in main ()
	(gdb)

scn_data was null at this code(tools/lib/bpf/src/libbpf.c):

	if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) {

The scn_data is derived from the code above:

	scn = elf_sec_by_idx(obj, sec_idx);
	scn_data = elf_sec_data(obj, scn);

	relo_sec_name = elf_sec_str(obj, shdr->sh_name);
	sec_name = elf_sec_name(obj, scn);
	if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL
		return -EINVAL;

In certain special scenarios, such as reading a malformed ELF file,
it is possible that scn_data may be a null pointer

Signed-off-by: Mingyi Zhang <[email protected]>
Signed-off-by: Xin Liu <[email protected]>
Signed-off-by: Changye Wu <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
matrix-wsk pushed a commit to matrix-wsk/kernel-6.6 that referenced this pull request Feb 23, 2024
@gregkh
usb: dwc3: host: Set XHCI_SG_TRB_CACHE_SIZE_QUIRK
b3e8e68 
commit 817349b upstream.

Upstream commit bac1ec5 ("usb: xhci: Set quirk for
XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI
which fixes XHC timeout, which was seen on synopsys XHCs while
using SG buffers. But the support for this quirk isn't present
in the DWC3 layer.

We will encounter this XHCI timeout/hung issue if we run iperf
loopback tests using RTL8156 ethernet adaptor on DWC3 targets
with scatter-gather enabled. This gets resolved after enabling
the XHCI_SG_TRB_CACHE_SIZE_QUIRK. This patch enables it using
the xhci device property since its needed for DWC3 controller.

In Synopsys DWC3 databook,
Table 9-3: xHCI Debug Capability Limitations
Chained TRBs greater than TRB cache size: The debug capability
driver must not create a multi-TRB TD that describes smaller
than a 1K packet that spreads across 8 or more TRBs on either
the IN TR or the OUT TR.

Cc: [email protected] deepin-community#5.11
Signed-off-by: Prashanth K <[email protected]>
Acked-by: Thinh Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
matrix-wsk pushed a commit to matrix-wsk/kernel-6.6 that referenced this pull request Mar 11, 2024
@gregkh
dmaengine: idxd: Ensure safe user copy of completion record
5e3022e 
[ Upstream commit d3ea125 ]

If CONFIG_HARDENED_USERCOPY is enabled, copying completion record from
event log cache to user triggers a kernel bug.

[ 1987.159822] usercopy: Kernel memory exposure attempt detected from SLUB object 'dsa0' (offset 74, size 31)!
[ 1987.170845] ------------[ cut here ]------------
[ 1987.176086] kernel BUG at mm/usercopy.c:102!
[ 1987.180946] invalid opcode: 0000 [deepin-community#1] PREEMPT SMP NOPTI
[ 1987.186866] CPU: 17 PID: 528 Comm: kworker/17:1 Not tainted 6.8.0-rc2+ deepin-community#5
[ 1987.194537] Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023
[ 1987.206405] Workqueue: wq0.0 idxd_evl_fault_work [idxd]
[ 1987.212338] RIP: 0010:usercopy_abort+0x72/0x90
[ 1987.217381] Code: 58 65 9c 50 48 c7 c2 17 85 61 9c 57 48 c7 c7 98 fd 6b 9c 48 0f 44 d6 48 c7 c6 b3 08 62 9c 4c 89 d1 49 0f 44 f3 e8 1e 2e d5 ff <0f> 0b 49 c7 c1 9e 42 61 9c 4c 89 cf 4d 89 c8 eb a9 66 66 2e 0f 1f
[ 1987.238505] RSP: 0018:ff62f5cf20607d60 EFLAGS: 00010246
[ 1987.244423] RAX: 000000000000005f RBX: 000000000000001f RCX: 0000000000000000
[ 1987.252480] RDX: 0000000000000000 RSI: ffffffff9c61429e RDI: 00000000ffffffff
[ 1987.260538] RBP: ff62f5cf20607d78 R08: ff2a6a89ef3fffe8 R09: 00000000fffeffff
[ 1987.268595] R10: ff2a6a89eed00000 R11: 0000000000000003 R12: ff2a66934849c89a
[ 1987.276652] R13: 0000000000000001 R14: ff2a66934849c8b9 R15: ff2a66934849c899
[ 1987.284710] FS:  0000000000000000(0000) GS:ff2a66b22fe40000(0000) knlGS:0000000000000000
[ 1987.293850] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1987.300355] CR2: 00007fe291a37000 CR3: 000000010fbd4005 CR4: 0000000000f71ef0
[ 1987.308413] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1987.316470] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 1987.324527] PKRU: 55555554
[ 1987.327622] Call Trace:
[ 1987.330424]  <TASK>
[ 1987.332826]  ? show_regs+0x6e/0x80
[ 1987.336703]  ? die+0x3c/0xa0
[ 1987.339988]  ? do_trap+0xd4/0xf0
[ 1987.343662]  ? do_error_trap+0x75/0xa0
[ 1987.347922]  ? usercopy_abort+0x72/0x90
[ 1987.352277]  ? exc_invalid_op+0x57/0x80
[ 1987.356634]  ? usercopy_abort+0x72/0x90
[ 1987.360988]  ? asm_exc_invalid_op+0x1f/0x30
[ 1987.365734]  ? usercopy_abort+0x72/0x90
[ 1987.370088]  __check_heap_object+0xb7/0xd0
[ 1987.374739]  __check_object_size+0x175/0x2d0
[ 1987.379588]  idxd_copy_cr+0xa9/0x130 [idxd]
[ 1987.384341]  idxd_evl_fault_work+0x127/0x390 [idxd]
[ 1987.389878]  process_one_work+0x13e/0x300
[ 1987.394435]  ? __pfx_worker_thread+0x10/0x10
[ 1987.399284]  worker_thread+0x2f7/0x420
[ 1987.403544]  ? _raw_spin_unlock_irqrestore+0x2b/0x50
[ 1987.409171]  ? __pfx_worker_thread+0x10/0x10
[ 1987.414019]  kthread+0x107/0x140
[ 1987.417693]  ? __pfx_kthread+0x10/0x10
[ 1987.421954]  ret_from_fork+0x3d/0x60
[ 1987.426019]  ? __pfx_kthread+0x10/0x10
[ 1987.430281]  ret_from_fork_asm+0x1b/0x30
[ 1987.434744]  </TASK>

The issue arises because event log cache is created using
kmem_cache_create() which is not suitable for user copy.

Fix the issue by creating event log cache with
kmem_cache_create_usercopy(), ensuring safe user copy.

Fixes: c2f156b ("dmaengine: idxd: create kmem cache for event log fault items")
Reported-by: Tony Zhu <[email protected]>
Tested-by: Tony Zhu <[email protected]>
Signed-off-by: Fenghua Yu <[email protected]>
Reviewed-by: Lijun Pan <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
matrix-wsk pushed a commit to matrix-wsk/kernel-6.6 that referenced this pull request Apr 8, 2024
@zx2c4 @gregkh
wireguard: netlink: check for dangling peer via is_dead instead of em…
13d1077 
…pty list

[ Upstream commit 55b6c73 ]

If all peers are removed via wg_peer_remove_all(), rather than setting
peer_list to empty, the peer is added to a temporary list with a head on
the stack of wg_peer_remove_all(). If a netlink dump is resumed and the
cursored peer is one that has been removed via wg_peer_remove_all(), it
will iterate from that peer and then attempt to dump freed peers.

Fix this by instead checking peer->is_dead, which was explictly created
for this purpose. Also move up the device_update_lock lockdep assertion,
since reading is_dead relies on that.

It can be reproduced by a small script like:

    echo "Setting config..."
    ip link add dev wg0 type wireguard
    wg setconf wg0 /big-config
    (
            while true; do
                    echo "Showing config..."
                    wg showconf wg0 > /dev/null
            done
    ) &
    sleep 4
    wg setconf wg0 <(printf "[Peer]\nPublicKey=$(wg genkey)\n")

Resulting in:

    BUG: KASAN: slab-use-after-free in __lock_acquire+0x182a/0x1b20
    Read of size 8 at addr ffff88811956ec70 by task wg/59
    CPU: 2 PID: 59 Comm: wg Not tainted 6.8.0-rc2-debug+ deepin-community#5
    Call Trace:
     <TASK>
     dump_stack_lvl+0x47/0x70
     print_address_description.constprop.0+0x2c/0x380
     print_report+0xab/0x250
     kasan_report+0xba/0xf0
     __lock_acquire+0x182a/0x1b20
     lock_acquire+0x191/0x4b0
     down_read+0x80/0x440
     get_peer+0x140/0xcb0
     wg_get_device_dump+0x471/0x1130

Cc: [email protected]
Fixes: e7096c1 ("net: WireGuard secure network tunnel")
Reported-by: Lillian Berry <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
matrix-wsk pushed a commit to matrix-wsk/kernel-6.6 that referenced this pull request Apr 8, 2024
@gregkh
drm/vmwgfx: Create debugfs ttm_resource_manager entry only if needed
042ef0a 
commit 4be9075 upstream.

The driver creates /sys/kernel/debug/dri/0/mob_ttm even when the
corresponding ttm_resource_manager is not allocated.
This leads to a crash when trying to read from this file.

Add a check to create mob_ttm, system_mob_ttm, and gmr_ttm debug file
only when the corresponding ttm_resource_manager is allocated.

crash> bt
PID: 3133409  TASK: ffff8fe4834a5000  CPU: 3    COMMAND: "grep"
 #0 [ffffb954506b3b20] machine_kexec at ffffffffb2a6bec3
 deepin-community#1 [ffffb954506b3b78] __crash_kexec at ffffffffb2bb598a
 deepin-community#2 [ffffb954506b3c38] crash_kexec at ffffffffb2bb68c1
 deepin-community#3 [ffffb954506b3c50] oops_end at ffffffffb2a2a9b1
 deepin-community#4 [ffffb954506b3c70] no_context at ffffffffb2a7e913
 deepin-community#5 [ffffb954506b3cc8] __bad_area_nosemaphore at ffffffffb2a7ec8c
 deepin-community#6 [ffffb954506b3d10] do_page_fault at ffffffffb2a7f887
 deepin-community#7 [ffffb954506b3d40] page_fault at ffffffffb360116e
    [exception RIP: ttm_resource_manager_debug+0x11]
    RIP: ffffffffc04afd11  RSP: ffffb954506b3df0  RFLAGS: 00010246
    RAX: ffff8fe41a6d1200  RBX: 0000000000000000  RCX: 0000000000000940
    RDX: 0000000000000000  RSI: ffffffffc04b4338  RDI: 0000000000000000
    RBP: ffffb954506b3e08   R8: ffff8fee3ffad000   R9: 0000000000000000
    R10: ffff8fe41a76a000  R11: 0000000000000001  R12: 00000000ffffffff
    R13: 0000000000000001  R14: ffff8fe5bb6f3900  R15: ffff8fe41a6d1200
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 deepin-community#8 [ffffb954506b3e00] ttm_resource_manager_show at ffffffffc04afde7 [ttm]
 deepin-community#9 [ffffb954506b3e30] seq_read at ffffffffb2d8f9f3
    RIP: 00007f4c4eda8985  RSP: 00007ffdbba9e9f8  RFLAGS: 00000246
    RAX: ffffffffffffffda  RBX: 000000000037e000  RCX: 00007f4c4eda8985
    RDX: 000000000037e000  RSI: 00007f4c41573000  RDI: 0000000000000003
    RBP: 000000000037e000   R8: 0000000000000000   R9: 000000000037fe30
    R10: 0000000000000000  R11: 0000000000000246  R12: 00007f4c41573000
    R13: 0000000000000003  R14: 00007f4c41572010  R15: 0000000000000003
    ORIG_RAX: 0000000000000000  CS: 0033  SS: 002b

Signed-off-by: Jocelyn Falempe <[email protected]>
Fixes: af4a25b ("drm/vmwgfx: Add debugfs entries for various ttm resource managers")
Cc: <[email protected]>
Reviewed-by: Zack Rusin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
matrix-wsk added a commit that referenced this pull request Apr 8, 2024
@matrix-wsk @sprasad-microsoft
@miquelraynal @mszyprow @bp3tk0v @dtatulea @rostedt @AlisonSchofield @davidhildenbrand @chenhuacai @zx2c4 @LynxChaus @ConiKost @PhilipYangA @AntonAltaparmakov @marcan @zackr @jnikula @superm1 @hguo3 @ummakynes @mhklinux @airlied @karolherbst @herbertx @AndreySV @nathanchance @tehcaster @kamalesh-babulal @HP-HX-maxster @kees @sean-jc @bonzini @nirmoy @KailangYang @AlanStern @matnyman @SherrySun5 @jwrdegoede @ausyskin @npitre @dianders @bvanassche @b49020 @jhovold @Demon000 @hkallweit @jmaneyrol-invn @vsyrjala @alexdeucher @ardbiesheuvel @jwangac @jmberg-intel @zhangjaycee @cntianci @alberand @josefbacik @xdarklight @andrej @willdeacon @nicolinc @jogness @claudiubeznea @bijudas @mhiramat @kndk @KAGA-KOKO @gonzoua @wigyori @musamaanjum @vt-alt @soyersoyer @zevweiss @cmaiolino @tavianator @morbidrsa @nbd168 @jcmvbkbc @hnaz @edliaw @mikkorapeli-linaro @lsun100 @damien-lemoal @stonezdm @ClausRies @erichuang22 @jkrzyszt-intel @JonathonHall-Purism @ickle @Vudentz @easybe @tq-steina @oneukum @brettcreeley @guilhermepiccoli @arndb @kyletsoadl @pa1gupta @hansendc @kevinloughlin @ncopa @vprosyak @gregkh
[Deepin-Kernel-SIG][Upstream]Update kernel base to 6.6.25 (#101)
62322fa 
* cifs: make cifs_chan_update_iface() a void function

[ Upstream commit 8d606c311b75e81063b4ea650b301cbe0c4ed5e1 ]

The return values for cifs_chan_update_iface() didn't match what the
documentation said and nothing was checking them anyway.  Just make it
a void function.

Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Steve French <[email protected]>
Stable-dep-of: 16a57d768111 ("cifs: reduce warning log level for server not advertising interfaces")
Signed-off-by: Sasha Levin <[email protected]>

* cifs: reduce warning log level for server not advertising interfaces

[ Upstream commit 16a57d7681110b25708c7042688412238e6f73a9 ]

Several users have reported this log getting dumped too regularly to
kernel log. The likely root cause has been identified, and it suggests
that this situation is expected for some configurations
(for example SMB2.1).

Since the function returns appropriately even for such cases, it is
fairly harmless to make this a debug log. When needed, the verbosity
can be increased to capture this log.

Cc: [email protected]
Reported-by: Jan Čermák <[email protected]>
Signed-off-by: Shyam Prasad N <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* cifs: open_cached_dir(): add FILE_READ_EA to desired access

[ Upstream commit f1b8224b4e6ed59e7e6f5c548673c67410098d8d ]

Since smb2_query_eas() reads EA and uses cached directory,
open_cached_dir() should request FILE_READ_EA access.

Otherwise listxattr() and getxattr() will fail with EACCES
(0xc0000022 STATUS_ACCESS_DENIED SMB status).

Link: https://bugzilla.kernel.org/show_bug.cgi?id=218543
Cc: [email protected]
Signed-off-by: Eugene Korenevsky <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* mtd: rawnand: Fix and simplify again the continuous read derivations

[ Upstream commit c7ee7c8d4b60fe46d4861b1200bc1c7ab657960a ]

We need to avoid the first page if we don't read it entirely.
We need to avoid the last page if we don't read it entirely.
While rather simple, this logic has been failed in the previous
fix. This time I wrote about 30 unit tests locally to check each
possible condition, hopefully I covered them all.

Reported-by: Christophe Kerello <[email protected]>
Closes: https://lore.kernel.org/linux-mtd/20240221175327.42f7076d@xps-13/T/#m399bacb10db8f58f6b1f0149a1df867ec086bb0a
Suggested-by: Christophe Kerello <[email protected]>
Fixes: 828f6df1bcba ("mtd: rawnand: Clarify conditions to enable continuous reads")
Cc: [email protected]
Signed-off-by: Miquel Raynal <[email protected]>
Tested-by: Christophe Kerello <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>

* mtd: rawnand: Constrain even more when continuous reads are enabled

[ Upstream commit 78ffbefba8d7822b232585570b293de5bc397da6 ]

As a matter of fact, continuous reads require additional handling at the
operation level in order for them to work properly. The core helpers do
have this additional logic now, but any time a controller implements its
own page helper, this extra logic is "lost". This means we need another
level of per-controller driver checks to ensure they can leverage
continuous reads. This is for now unsupported, so in order to ensure
continuous reads are enabled only when fully using the core page
helpers, we need to add more initial checks.

Also, as performance is not relevant during raw accesses, we also
prevent these from enabling the feature.

This should solve the issue seen with controllers such as the STM32 FMC2
when in sequencer mode. In this case, the continuous read feature would
be enabled but not leveraged, and most importantly not disabled, leading
to further operations to fail.

Reported-by: Christophe Kerello <[email protected]>
Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads")
Cc: [email protected]
Signed-off-by: Miquel Raynal <[email protected]>
Tested-by: Christophe Kerello <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
Signed-off-by: Sasha Levin <[email protected]>

* cpufreq: dt: always allocate zeroed cpumask

[ Upstream commit d2399501c2c081eac703ca9597ceb83c7875a537 ]

Commit 0499a78369ad ("ARM64: Dynamically allocate cpumasks and increase
supported CPUs to 512") changed the handling of cpumasks on ARM 64bit,
what resulted in the strange issues and warnings during cpufreq-dt
initialization on some big.LITTLE platforms.

This was caused by mixing OPPs between big and LITTLE cores, because
OPP-sharing information between big and LITTLE cores is computed on
cpumask, which in turn was not zeroed on allocation. Fix this by
switching to zalloc_cpumask_var() call.

Fixes: dc279ac6e5b4 ("cpufreq: dt: Refactor initialization to handle probe deferral properly")
CC: [email protected] # v5.10+
Signed-off-by: Marek Szyprowski <[email protected]>
Reviewed-by: Christoph Lameter (Ampere) <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* x86/CPU/AMD: Update the Zenbleed microcode revisions

[ Upstream commit 5c84b051bd4e777cf37aaff983277e58c99618d5 ]

Update them to the correct revision numbers.

Fixes: 522b1d69219d ("x86/cpu/amd: Add a Zenbleed fix")
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Cc: <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* net: esp: fix bad handling of pages from page_pool

[ Upstream commit c3198822c6cb9fb588e446540485669cc81c5d34 ]

When the skb is reorganized during esp_output (!esp->inline), the pages
coming from the original skb fragments are supposed to be released back
to the system through put_page. But if the skb fragment pages are
originating from a page_pool, calling put_page on them will trigger a
page_pool leak which will eventually result in a crash.

This leak can be easily observed when using CONFIG_DEBUG_VM and doing
ipsec + gre (non offloaded) forwarding:

  BUG: Bad page state in process ksoftirqd/16  pfn:1451b6
  page:00000000de2b8d32 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1451b6000 pfn:0x1451b6
  flags: 0x200000000000000(node=0|zone=2)
  page_type: 0xffffffff()
  raw: 0200000000000000 dead000000000040 ffff88810d23c000 0000000000000000
  raw: 00000001451b6000 0000000000000001 00000000ffffffff 0000000000000000
  page dumped because: page_pool leak
  Modules linked in: ip_gre gre mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay zram zsmalloc fuse [last unloaded: mlx5_core]
  CPU: 16 PID: 96 Comm: ksoftirqd/16 Not tainted 6.8.0-rc4+ #22
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x36/0x50
   bad_page+0x70/0xf0
   free_unref_page_prepare+0x27a/0x460
   free_unref_page+0x38/0x120
   esp_ssg_unref.isra.0+0x15f/0x200
   esp_output_tail+0x66d/0x780
   esp_xmit+0x2c5/0x360
   validate_xmit_xfrm+0x313/0x370
   ? validate_xmit_skb+0x1d/0x330
   validate_xmit_skb_list+0x4c/0x70
   sch_direct_xmit+0x23e/0x350
   __dev_queue_xmit+0x337/0xba0
   ? nf_hook_slow+0x3f/0xd0
   ip_finish_output2+0x25e/0x580
   iptunnel_xmit+0x19b/0x240
   ip_tunnel_xmit+0x5fb/0xb60
   ipgre_xmit+0x14d/0x280 [ip_gre]
   dev_hard_start_xmit+0xc3/0x1c0
   __dev_queue_xmit+0x208/0xba0
   ? nf_hook_slow+0x3f/0xd0
   ip_finish_output2+0x1ca/0x580
   ip_sublist_rcv_finish+0x32/0x40
   ip_sublist_rcv+0x1b2/0x1f0
   ? ip_rcv_finish_core.constprop.0+0x460/0x460
   ip_list_rcv+0x103/0x130
   __netif_receive_skb_list_core+0x181/0x1e0
   netif_receive_skb_list_internal+0x1b3/0x2c0
   napi_gro_receive+0xc8/0x200
   gro_cell_poll+0x52/0x90
   __napi_poll+0x25/0x1a0
   net_rx_action+0x28e/0x300
   __do_softirq+0xc3/0x276
   ? sort_range+0x20/0x20
   run_ksoftirqd+0x1e/0x30
   smpboot_thread_fn+0xa6/0x130
   kthread+0xcd/0x100
   ? kthread_complete_and_exit+0x20/0x20
   ret_from_fork+0x31/0x50
   ? kthread_complete_and_exit+0x20/0x20
   ret_from_fork_asm+0x11/0x20
   </TASK>

The suggested fix is to introduce a new wrapper (skb_page_unref) that
covers page refcounting for page_pool pages as well.

Cc: [email protected]
Fixes: 6a5bcd84e886 ("page_pool: Allow drivers to hint on SKB recycling")
Reported-and-tested-by: Anatoli N.Chechelnickiy <[email protected]>
Reported-by: Ian Kumlien <[email protected]>
Link: https://lore.kernel.org/netdev/CAA85sZvvHtrpTQRqdaOx6gd55zPAVsqMYk_Lwh4Md5knTq7AyA@mail.gmail.com
Signed-off-by: Dragos Tatulea <[email protected]>
Reviewed-by: Mina Almasry <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* NFSD: Fix nfsd_clid_class use of __string_len() macro

[ Upstream commit 9388a2aa453321bcf1ad2603959debea9e6ab6d4 ]

I'm working on restructuring the __string* macros so that it doesn't need
to recalculate the string twice. That is, it will save it off when
processing __string() and the __assign_str() will not need to do the work
again as it currently does.

Currently __string_len(item, src, len) doesn't actually use "src", but my
changes will require src to be correct as that is where the __assign_str()
will get its value from.

The event class nfsd_clid_class has:

  __string_len(name, name, clp->cl_name.len)

But the second "name" does not exist and causes my changes to fail to
build. That second parameter should be: clp->cl_name.data.

Link: https://lore.kernel.org/linux-trace-kernel/[email protected]

Cc: Neil Brown <[email protected]>
Cc: Olga Kornievskaia <[email protected]>
Cc: Dai Ngo <[email protected]>
Cc: Tom Talpey <[email protected]>
Cc: [email protected]
Fixes: d27b74a8675ca ("NFSD: Use new __string_len C macros for nfsd_clid_class")
Acked-by: Chuck Lever <[email protected]>
Acked-by: Jeff Layton <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* drm/i915: Add missing ; to __assign_str() macros in tracepoint code

[ Upstream commit 0df4c388a1e310400a6e90fb10b286e2673756f0 ]

I'm working on improving the __assign_str() and __string() macros to be
more efficient, and removed some unneeded semicolons. This triggered a bug
in the build as some of the __assign_str() macros in intel_display_trace
was missing a terminating semicolon.

Link: https://lore.kernel.org/linux-trace-kernel/[email protected]

Cc: Daniel Vetter <[email protected]>
Cc: David Airlie <[email protected]>
Cc: [email protected]
Fixes: 2ceea5d88048b ("drm/i915: Print plane name in fbc tracepoints")
Reviewed-by: Ville Syrjälä <[email protected]>
Acked-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* net: hns3: tracing: fix hclgevf trace event strings

[ Upstream commit 3f9952e8d80cca2da3b47ecd5ad9ec16cfd1a649 ]

The __string() and __assign_str() helper macros of the TRACE_EVENT() macro
are going through some optimizations where only the source string of
__string() will be used and the __assign_str() source will be ignored and
later removed.

To make sure that there's no issues, a new check is added between the
__string() src argument and the __assign_str() src argument that does a
strcmp() to make sure they are the same string.

The hclgevf trace events have:

  __assign_str(devname, &hdev->nic.kinfo.netdev->name);

Which triggers the warning:

hclgevf_trace.h:34:39: error: passing argument 1 of ‘strcmp’ from incompatible pointer type [-Werror=incompatible-pointer-types]
   34 |                 __assign_str(devname, &hdev->nic.kinfo.netdev->name);
 [..]
arch/x86/include/asm/string_64.h:75:24: note: expected ‘const char *’ but argument is of type ‘char (*)[16]’
   75 | int strcmp(const char *cs, const char *ct);
      |            ~~~~~~~~~~~~^~

Because __assign_str() now has:

	WARN_ON_ONCE(__builtin_constant_p(src) ?		\
		     strcmp((src), __data_offsets.dst##_ptr_) :	\
		     (src) != __data_offsets.dst##_ptr_);	\

The problem is the '&' on hdev->nic.kinfo.netdev->name. That's because
that name is:

	char			name[IFNAMSIZ]

Where passing an address '&' of a char array is not compatible with strcmp().

The '&' is not necessary, remove it.

Link: https://lore.kernel.org/linux-trace-kernel/[email protected]

Cc: netdev <[email protected]>
Cc: Yisen Zhuang <[email protected]>
Cc: Salil Mehta <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Yufeng Mo <[email protected]>
Cc: Huazhong Tan <[email protected]>
Cc: [email protected]
Acked-by: Paolo Abeni <[email protected]>
Reviewed-by: Jijie Shao <[email protected]>
Fixes: d8355240cf8fb ("net: hns3: add trace event support for PF/VF mailbox")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* cxl/trace: Properly initialize cxl_poison region name

[ Upstream commit 6c871260965255a1c142fb77ccee58b172d1690b ]

The TP_STRUCT__entry that gets assigned the region name, or an
empty string if no region is present, is erroneously initialized
to the cxl_region pointer. It needs to be properly initialized
otherwise it's length is wrong and garbage chars can appear in
the kernel trace output: /sys/kernel/tracing/trace

The bad initialization was due in part to a naming conflict with
the parameter: struct cxl_region *region. The field 'region' is
already exposed externally as the region name, so changing that
to something logical, like 'region_name' is not an option. Instead
rename the internal only struct cxl_region to the commonly used
'cxlr'.

Impact is that tooling depending on that trace data can miss
picking up a valid event when searching by region name. The
TP_printk() output, if enabled, does emit the correct region
names in the dmesg log.

This was found during testing of the cxl-list option to report
media-errors for a region.

Cc: Davidlohr Bueso <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Dave Jiang <[email protected]>
Cc: Vishal Verma <[email protected]>
Cc: [email protected]
Fixes: ddf49d57b841 ("cxl/trace: Add TRACE support for CXL media-error records")
Signed-off-by: Alison Schofield <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Acked-by: Dan Williams <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* virtio: reenable config if freezing device failed

[ Upstream commit 310227f42882c52356b523e2f4e11690eebcd2ab ]

Currently, we don't reenable the config if freezing the device failed.

For example, virtio-mem currently doesn't support suspend+resume, and
trying to freeze the device will always fail. Afterwards, the device
will no longer respond to resize requests, because it won't get notified
about config changes.

Let's fix this by re-enabling the config if freezing fails.

Fixes: 22b7050a024d ("virtio: defer config changed notifications")
Cc: <[email protected]>
Cc: "Michael S. Tsirkin" <[email protected]>
Cc: Jason Wang <[email protected]>
Cc: Xuan Zhuo <[email protected]>
Signed-off-by: David Hildenbrand <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* LoongArch: Change __my_cpu_offset definition to avoid mis-optimization

[ Upstream commit c87e12e0e8c1241410e758e181ca6bf23efa5b5b ]

From GCC commit 3f13154553f8546a ("df-scan: remove ad-hoc handling of
global regs in asms"), global registers will no longer be forced to add
to the def-use chain. Then current_thread_info(), current_stack_pointer
and __my_cpu_offset may be lifted out of the loop because they are no
longer treated as "volatile variables".

This optimization is still correct for the current_thread_info() and
current_stack_pointer usages because they are associated to a thread.
However it is wrong for __my_cpu_offset because it is associated to a
CPU rather than a thread: if the thread migrates to a different CPU in
the loop, __my_cpu_offset should be changed.

Change __my_cpu_offset definition to treat it as a "volatile variable",
in order to avoid such a mis-optimization.

Cc: [email protected]
Reported-by: Xiaotian Wu <[email protected]>
Reported-by: Miao Wang <[email protected]>
Signed-off-by: Xing Li <[email protected]>
Signed-off-by: Hongchen Zhang <[email protected]>
Signed-off-by: Rui Wang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* LoongArch: Define the __io_aw() hook as mmiowb()

[ Upstream commit 9c68ece8b2a5c5ff9b2fcaea923dd73efeb174cd ]

Commit fb24ea52f78e0d595852e ("drivers: Remove explicit invocations of
mmiowb()") remove all mmiowb() in drivers, but it says:

"NOTE: mmiowb() has only ever guaranteed ordering in conjunction with
spin_unlock(). However, pairing each mmiowb() removal in this patch with
the corresponding call to spin_unlock() is not at all trivial, so there
is a small chance that this change may regress any drivers incorrectly
relying on mmiowb() to order MMIO writes between CPUs using lock-free
synchronisation."

The mmio in radeon_ring_commit() is protected by a mutex rather than a
spinlock, but in the mutex fastpath it behaves similar to spinlock. We
can add mmiowb() calls in the radeon driver but the maintainer says he
doesn't like such a workaround, and radeon is not the only example of
mutex protected mmio.

So we should extend the mmiowb tracking system from spinlock to mutex,
and maybe other locking primitives. This is not easy and error prone, so
we solve it in the architectural code, by simply defining the __io_aw()
hook as mmiowb(). And we no longer need to override queued_spin_unlock()
so use the generic definition.

Without this, we get such an error when run 'glxgears' on weak ordering
architectures such as LoongArch:

radeon 0000:04:00.0: ring 0 stalled for more than 10324msec
radeon 0000:04:00.0: ring 3 stalled for more than 10240msec
radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000001f412 last fence id 0x000000000001f414 on ring 3)
radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000000f940 last fence id 0x000000000000f941 on ring 0)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)
radeon 0000:04:00.0: scheduling IB failed (-35).
[drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35)

Link: https://lore.kernel.org/dri-devel/[email protected]/T/#t
Link: https://lore.kernel.org/linux-arch/[email protected]/T/#t
Cc: [email protected]
Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* LoongArch/crypto: Clean up useless assignment operations

[ Upstream commit fea1c949f6ca5059e12de00d0483645debc5b206 ]

The LoongArch CRC32 hw acceleration is based on arch/mips/crypto/
crc32-mips.c. While the MIPS code supports both MIPS32 and MIPS64,
but LoongArch32 lacks the CRC instruction. As a result, the line
"len -= sizeof(u32)" is unnecessary.

Removing it can make context code style more unified and improve
code readability.

Cc: [email protected]
Reviewed-by: WANG Xuerui <[email protected]>
Suggested-by: Wentao Guan <[email protected]>
Signed-off-by: Yuli Wang <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* wireguard: netlink: check for dangling peer via is_dead instead of empty list

[ Upstream commit 55b6c738673871c9b0edae05d0c97995c1ff08c4 ]

If all peers are removed via wg_peer_remove_all(), rather than setting
peer_list to empty, the peer is added to a temporary list with a head on
the stack of wg_peer_remove_all(). If a netlink dump is resumed and the
cursored peer is one that has been removed via wg_peer_remove_all(), it
will iterate from that peer and then attempt to dump freed peers.

Fix this by instead checking peer->is_dead, which was explictly created
for this purpose. Also move up the device_update_lock lockdep assertion,
since reading is_dead relies on that.

It can be reproduced by a small script like:

    echo "Setting config..."
    ip link add dev wg0 type wireguard
    wg setconf wg0 /big-config
    (
            while true; do
                    echo "Showing config..."
                    wg showconf wg0 > /dev/null
            done
    ) &
    sleep 4
    wg setconf wg0 <(printf "[Peer]\nPublicKey=$(wg genkey)\n")

Resulting in:

    BUG: KASAN: slab-use-after-free in __lock_acquire+0x182a/0x1b20
    Read of size 8 at addr ffff88811956ec70 by task wg/59
    CPU: 2 PID: 59 Comm: wg Not tainted 6.8.0-rc2-debug+ #5
    Call Trace:
     <TASK>
     dump_stack_lvl+0x47/0x70
     print_address_description.constprop.0+0x2c/0x380
     print_report+0xab/0x250
     kasan_report+0xba/0xf0
     __lock_acquire+0x182a/0x1b20
     lock_acquire+0x191/0x4b0
     down_read+0x80/0x440
     get_peer+0x140/0xcb0
     wg_get_device_dump+0x471/0x1130

Cc: [email protected]
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Reported-by: Lillian Berry <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* wireguard: netlink: access device through ctx instead of peer

[ Upstream commit 71cbd32e3db82ea4a74e3ef9aeeaa6971969c86f ]

The previous commit fixed a bug that led to a NULL peer->device being
dereferenced. It's actually easier and faster performance-wise to
instead get the device from ctx->wg. This semantically makes more sense
too, since ctx->wg->peer_allowedips.seq is compared with
ctx->allowedips_seq, basing them both in ctx. This also acts as a
defence in depth provision against freed peers.

Cc: [email protected]
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* wireguard: selftests: set RISCV_ISA_FALLBACK on riscv{32,64}

[ Upstream commit e995f5dd9a9cef818af32ec60fc38d68614afd12 ]

This option is needed to continue booting with QEMU. Recent changes that
made this optional meant that it gets unset in the test harness, and so
WireGuard CI has been broken. Fix this by simply setting this option.

Cc: [email protected]
Fixes: 496ea826d1e1 ("RISC-V: provide Kconfig & commandline options to control parsing "riscv,isa"")
Signed-off-by: Jason A. Donenfeld <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* ahci: asm1064: correct count of reported ports

[ Upstream commit 9815e39617541ef52d0dfac4be274ad378c6dc09 ]

The ASM1064 SATA host controller always reports wrongly,
that it has 24 ports. But in reality, it only has four ports.

before:
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst

after:
ahci 0000:04:00.0: ASM1064 has only four ports
ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst

Signed-off-by: "Andrey Jr. Melnikov" <[email protected]>
Signed-off-by: Niklas Cassel <[email protected]>
Stable-dep-of: 6cd8adc3e189 ("ahci: asm1064: asm1166: don't limit reported ports")
Signed-off-by: Sasha Levin <[email protected]>

* ahci: asm1064: asm1166: don't limit reported ports

[ Upstream commit 6cd8adc3e18960f6e59d797285ed34ef473cc896 ]

Previously, patches have been added to limit the reported count of SATA
ports for asm1064 and asm1166 SATA controllers, as those controllers do
report more ports than physically having.

While it is allowed to report more ports than physically having in CAP.NP,
it is not allowed to report more ports than physically having in the PI
(Ports Implemented) register, which is what these HBAs do.
(This is a AHCI spec violation.)

Unfortunately, it seems that the PMP implementation in these ASMedia HBAs
is also violating the AHCI and SATA-IO PMP specification.

What these HBAs do is that they do not report that they support PMP
(CAP.SPM (Supports Port Multiplier) is not set).

Instead, they have decided to add extra "virtual" ports in the PI register
that is used if a port multiplier is connected to any of the physical
ports of the HBA.

Enumerating the devices behind the PMP as specified in the AHCI and
SATA-IO specifications, by using PMP READ and PMP WRITE commands to the
physical ports of the HBA is not possible, you have to use the "virtual"
ports.

This is of course bad, because this gives us no way to detect the device
and vendor ID of the PMP actually connected to the HBA, which means that
we can not apply the proper PMP quirks for the PMP that is connected to
the HBA.

Limiting the port map will thus stop these controllers from working with
SATA Port Multipliers.

This patch reverts both patches for asm1064 and asm1166, so old behavior
is restored and SATA PMP will work again, but it will also reintroduce the
(minutes long) extra boot time for the ASMedia controllers that do not
have a PMP connected (either on the PCIe card itself, or an external PMP).

However, a longer boot time for some, is the lesser evil compared to some
other users not being able to detect their drives at all.

Fixes: 0077a504e1a4 ("ahci: asm1166: correct count of reported ports")
Fixes: 9815e3961754 ("ahci: asm1064: correct count of reported ports")
Cc: [email protected]
Reported-by: Matt <[email protected]>
Signed-off-by: Conrad Kostecki <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
[cassel: rewrote commit message]
Signed-off-by: Niklas Cassel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* drm/amdgpu: amdgpu_ttm_gart_bind set gtt bound flag

[ Upstream commit 6c6064cbe58b43533e3451ad6a8ba9736c109ac3 ]

Otherwise after the GTT bo is released, the GTT and gart space is freed
but amdgpu_ttm_backend_unbind will not clear the gart page table entry
and leave valid mapping entry pointing to the stale system page. Then
if GPU access the gart address mistakely, it will read undefined value
instead page fault, harder to debug and reproduce the real issue.

Cc: [email protected]
Signed-off-by: Philip Yang <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* drm/amd/display: Return the correct HDCP error code

[ Upstream commit e64b3f55e458ce7e2087a0051f47edabf74545e7 ]

[WHY & HOW]
If the display is null when creating an HDCP session, return a proper
error code.

Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Rodrigo Siqueira <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* drm/amd/display: Fix noise issue on HDMI AV mute

[ Upstream commit 69e3be6893a7e668660b05a966bead82bbddb01d ]

[Why]
When mode switching is triggered there is momentary noise visible on
some HDMI TV or displays.

[How]
Wait for 2 frames to make sure we have enough time to send out AV mute
and sink receives a full frame.

Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Wenjing Liu <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Leo Ma <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* dm snapshot: fix lockup in dm_exception_table_exit

[ Upstream commit 6e7132ed3c07bd8a6ce3db4bb307ef2852b322dc ]

There was reported lockup when we exit a snapshot with many exceptions.
Fix this by adding "cond_resched" to the loop that frees the exceptions.

Reported-by: John Pittman <[email protected]>
Cc: [email protected]
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* x86/pm: Work around false positive kmemleak report in msr_build_context()

[ Upstream commit e3f269ed0accbb22aa8f25d2daffa23c3fccd407 ]

Since:

  7ee18d677989 ("x86/power: Make restore_processor_context() sane")

kmemleak reports this issue:

  unreferenced object 0xf68241e0 (size 32):
    comm "swapper/0", pid 1, jiffies 4294668610 (age 68.432s)
    hex dump (first 32 bytes):
      00 cc cc cc 29 10 01 c0 00 00 00 00 00 00 00 00  ....)...........
      00 42 82 f6 cc cc cc cc cc cc cc cc cc cc cc cc  .B..............
    backtrace:
      [<461c1d50>] __kmem_cache_alloc_node+0x106/0x260
      [<ea65e13b>] __kmalloc+0x54/0x160
      [<c3858cd2>] msr_build_context.constprop.0+0x35/0x100
      [<46635aff>] pm_check_save_msr+0x63/0x80
      [<6b6bb938>] do_one_initcall+0x41/0x1f0
      [<3f3add60>] kernel_init_freeable+0x199/0x1e8
      [<3b538fde>] kernel_init+0x1a/0x110
      [<938ae2b2>] ret_from_fork+0x1c/0x28

Which is a false positive.

Reproducer:

  - Run rsync of whole kernel tree (multiple times if needed).
  - start a kmemleak scan
  - Note this is just an example: a lot of our internal tests hit these.

The root cause is similar to the fix in:

  b0b592cf0836 x86/pm: Fix false positive kmemleak report in msr_build_context()

ie. the alignment within the packed struct saved_context
which has everything unaligned as there is only "u16 gs;" at start of
struct where in the past there were four u16 there thus aligning
everything afterwards.  The issue is with the fact that Kmemleak only
searches for pointers that are aligned (see how pointers are scanned in
kmemleak.c) so when the struct members are not aligned it doesn't see
them.

Testing:

We run a lot of tests with our CI, and after applying this fix we do not
see any kmemleak issues any more whilst without it we see hundreds of
the above report. From a single, simple test run consisting of 416 individual test
cases on kernel 5.10 x86 with kmemleak enabled we got 20 failures due to this,
which is quite a lot. With this fix applied we get zero kmemleak related failures.

Fixes: 7ee18d677989 ("x86/power: Make restore_processor_context() sane")
Signed-off-by: Anton Altaparmakov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Acked-by: "Rafael J. Wysocki" <[email protected]>
Cc: [email protected]
Cc: Linus Torvalds <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>

* wifi: brcmfmac: add per-vendor feature detection callback

[ Upstream commit 14e1391b71027948cdbacdbea4bf8858c2068eb7 ]

Adding a .feat_attach() callback allowing per-vendor overrides
of the driver feature flags. In this patch the callback is only
provided by BCA vendor to disable SAE feature as it has not been
confirmed yet. BCA chips generally do not have the in-driver
supplicant (idsup) feature so they rely on NL80211_CMD_EXTERNAL_AUTH
to trigger user-space authentication.

Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
Stable-dep-of: 85da8f71aaa7 ("wifi: brcmfmac: Demote vendor-specific attach/detach messages to info")
Signed-off-by: Sasha Levin <[email protected]>

* wifi: brcmfmac: cfg80211: Use WSEC to set SAE password

[ Upstream commit 9f7861c56b51b84d30114e7fea9d744a9d5ba9b7 ]

Using the WSEC command instead of sae_password seems to be the supported
mechanism on newer firmware, and also how the brcmdhd driver does it.

The existing firmware mechanism intended for (some) Cypress chips has
been separated from the new firmware mechanism using the multi-vendor
framework. Depending on the device it will select the appropriate
firmware mechanism.

This makes WPA3 work with iwd, or with wpa_supplicant pending a support
patchset [2].

[1] https://rachelbythebay.com/w/2023/11/06/wpa3/
[2] http://lists.infradead.org/pipermail/hostap/2023-July/041653.html

Signed-off-by: Hector Martin <[email protected]>
Reviewed-by: Neal Gompa <[email protected]>
[[email protected]: use multi-vendor framework]
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
Stable-dep-of: 85da8f71aaa7 ("wifi: brcmfmac: Demote vendor-specific attach/detach messages to info")
Signed-off-by: Sasha Levin <[email protected]>

* wifi: brcmfmac: Demote vendor-specific attach/detach messages to info

[ Upstream commit 85da8f71aaa7b83ea7ef0e89182e0cd47e16d465 ]

People are getting spooked by brcmfmac errors on their boot console.
There's no reason for these messages to be errors.

Cc: [email protected] # 6.2.x
Fixes: d6a5c562214f ("wifi: brcmfmac: add support for vendor-specific firmware api")
Signed-off-by: Hector Martin <[email protected]>
[[email protected]: remove attach/detach vendor callbacks]
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
Signed-off-by: Sasha Levin <[email protected]>

* drm/ttm: Make sure the mapped tt pages are decrypted when needed

[ Upstream commit 71ce046327cfd3aef3f93d1c44e091395eb03f8f ]

Some drivers require the mapped tt pages to be decrypted. In an ideal
world this would have been handled by the dma layer, but the TTM page
fault handling would have to be rewritten to able to do that.

A side-effect of the TTM page fault handling is using a dma allocation
per order (via ttm_pool_alloc_page) which makes it impossible to just
trivially use dma_mmap_attrs. As a result ttm has to be very careful
about trying to make its pgprot for the mapped tt pages match what
the dma layer thinks it is. At the ttm layer it's possible to
deduce the requirement to have tt pages decrypted by checking
whether coherent dma allocations have been requested and the system
is running with confidential computing technologies.

This approach isn't ideal but keeping TTM matching DMAs expectations
for the page properties is in general fragile, unfortunately proper
fix would require a rewrite of TTM's page fault handling.

Fixes vmwgfx with SEV enabled.

v2: Explicitly include cc_platform.h
v3: Use CC_ATTR_GUEST_MEM_ENCRYPT instead of CC_ATTR_MEM_ENCRYPT to
limit the scope to guests and log when memory decryption is enabled.

Signed-off-by: Zack Rusin <[email protected]>
Fixes: 3bf3710e3718 ("drm/ttm: Add a generic TTM memcpy move for page-based iomem")
Reviewed-by: Thomas Hellström <[email protected]>
Acked-by: Christian König <[email protected]>
Cc: Huang Rui <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: <[email protected]> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>

* drm/bridge: add ->edid_read hook and drm_bridge_edid_read()

[ Upstream commit d807ad80d811ba0c22adfd871e2a46491f80d6e2 ]

Add new struct drm_edid based ->edid_read hook and
drm_bridge_edid_read() function to call the hook.

v2: Include drm/drm_edid.h

Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/9d08d22eaffcb9c59a2b677e45d7e61fc689bc2f.1706038510.git.jani.nikula@intel.com
Stable-dep-of: 171b711b26cc ("drm/bridge: lt8912b: do not return negative values from .get_modes()")
Signed-off-by: Sasha Levin <[email protected]>

* drm/bridge: lt8912b: use drm_bridge_edid_read()

[ Upstream commit 60d1fe1a7f302cc1151b155ac2d134db59bb1420 ]

Prefer using the struct drm_edid based functions.

cc: Adrien Grassein <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Robert Foss <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Jonas Karlman <[email protected]>
Cc: Jernej Skrabec <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/32c9b52fe6fa7cbad6bfd0ff00041876977e02ea.1706038510.git.jani.nikula@intel.com
Stable-dep-of: 171b711b26cc ("drm/bridge: lt8912b: do not return negative values from .get_modes()")
Signed-off-by: Sasha Levin <[email protected]>

* drm/bridge: lt8912b: clear the EDID property on failures

[ Upstream commit 29e032296da5d6294378ffa8bad8e976c5aadbf5 ]

If EDID read fails, clear the EDID property.

Cc: Adrien Grassein <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Robert Foss <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Jonas Karlman <[email protected]>
Cc: Jernej Skrabec <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/2080adaadf4bba3d85f58c42c065caf9aad9a4ef.1706038510.git.jani.nikula@intel.com
Stable-dep-of: 171b711b26cc ("drm/bridge: lt8912b: do not return negative values from .get_modes()")
Signed-off-by: Sasha Levin <[email protected]>

* drm/bridge: lt8912b: do not return negative values from .get_modes()

[ Upstream commit 171b711b26cce208bb628526b1b368aeec7b6fa4 ]

The .get_modes() hooks aren't supposed to return negative error
codes. Return 0 for no modes, whatever the reason.

Cc: Adrien Grassein <[email protected]>
Cc: [email protected]
Acked-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/dcdddcbcb64b6f6cdc55022ee50c10dee8ddbc3d.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* workqueue: Shorten events_freezable_power_efficient name

commit 8318d6a6362f5903edb4c904a8dd447e59be4ad1 upstream.

Since we have set the WQ_NAME_LEN to 32, decrease the name of
events_freezable_power_efficient so that it does not trip the name length
warning when the workqueue is created.

Signed-off-by: Audra Mitchell <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

* drm/amd/display: Use freesync when `DRM_EDID_FEATURE_CONTINUOUS_FREQ` found

commit 2f14c0c8cae8e9e3b603a3f91909baba66540027 upstream.

The monitor shipped with the Framework 16 supports VRR [1], but it's not
being advertised.

This is because the detailed timing block doesn't contain
`EDID_DETAIL_MONITOR_RANGE` which amdgpu looks for to find min and max
frequencies.  This check however is superfluous for this case because
update_display_info() calls drm_get_monitor_range() to get these ranges
already.

So if the `DRM_EDID_FEATURE_CONTINUOUS_FREQ` EDID feature is found then
turn on freesync without extra checks.

v2: squash in fix from Harry

Closes: https://www.reddit.com/r/framework/comments/1b4y2i5/no_variable_refresh_rate_on_the_framework_16_on/
Closes: https://www.reddit.com/r/framework/comments/1b6vzcy/framework_16_variable_refresh_rate/
Closes: https://community.frame.work/t/resolved-no-vrr-freesync-with-amd-version/42338
Link: https://gist.github.com/superm1/e8fbacfa4d0f53150231d3a3e0a13faf
Signed-off-by: Mario Limonciello <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

* net: fix IPSTATS_MIB_OUTPKGS increment in OutForwDatagrams.

commit b4a11b2033b7d3dfdd46592f7036a775b18cecd1 upstream.

Reproduce environment:
network with 3 VM linuxs is connected as below:
VM1<---->VM2(latest kernel 6.5.0-rc7)<---->VM3
VM1: eth0 ip: 192.168.122.207 MTU 1500
VM2: eth0 ip: 192.168.122.208, eth1 ip: 192.168.123.224 MTU 1500
VM3: eth0 ip: 192.168.123.240 MTU 1500

Reproduce:
VM1 send 1400 bytes UDP data to VM3 using tools scapy with flags=0.
scapy command:
send(IP(dst="192.168.123.240",flags=0)/UDP()/str('0'*1400),count=1,
inter=1.000000)

Result:
Before IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
  ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
  OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
  FragOKs FragFails FragCreates
Ip: 1 64 11 0 3 4 0 0 4 7 0 0 0 0 0 0 0 0 0
......
----------------------------------------------------------------------
After IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
  ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
  OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
  FragOKs FragFails FragCreates
Ip: 1 64 12 0 3 5 0 0 4 8 0 0 0 0 0 0 0 0 0
......
----------------------------------------------------------------------
"ForwDatagrams" increase from 4 to 5 and "OutRequests" also increase
from 7 to 8.

Issue description and patch:
IPSTATS_MIB_OUTPKTS("OutRequests") is counted with IPSTATS_MIB_OUTOCTETS
("OutOctets") in ip_finish_output2().
According to RFC 4293, it is "OutOctets" counted with "OutTransmits" but
not "OutRequests". "OutRequests" does not include any datagrams counted
in "ForwDatagrams".
ipSystemStatsOutOctets OBJECT-TYPE
    DESCRIPTION
           "The total number of octets in IP datagrams delivered to the
            lower layers for transmission.  Octets from datagrams
            counted in ipIfStatsOutTransmits MUST be counted here.
ipSystemStatsOutRequests OBJECT-TYPE
    DESCRIPTION
           "The total number of IP datagrams that local IP user-
            protocols (including ICMP) supplied to IP in requests for
            transmission.  Note that this counter does not include any
            datagrams counted in ipSystemStatsOutForwDatagrams.
So do patch to define IPSTATS_MIB_OUTPKTS to "OutTransmits" and add
IPSTATS_MIB_OUTREQUESTS for "OutRequests".
Add IPSTATS_MIB_OUTREQUESTS counter in __ip_local_out() for ipv4 and add
IPSTATS_MIB_OUT counter in ip6_finish_output2() for ipv6.

Test result with patch:
Before IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
  ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
  OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
  FragOKs FragFails FragCreates OutTransmits
Ip: 1 64 9 0 5 1 0 0 3 3 0 0 0 0 0 0 0 0 0 4
......
root@qemux86-64:~# cat /proc/net/netstat
......
IpExt: InNoRoutes InTruncatedPkts InMcastPkts OutMcastPkts InBcastPkts
  OutBcastPkts InOctets OutOctets InMcastOctets OutMcastOctets
  InBcastOctets OutBcastOctets InCsumErrors InNoECTPkts InECT1Pkts
  InECT0Pkts InCEPkts ReasmOverlaps
IpExt: 0 0 0 0 0 0 2976 1896 0 0 0 0 0 9 0 0 0 0
----------------------------------------------------------------------
After IP data is sent.
----------------------------------------------------------------------
root@qemux86-64:~# cat /proc/net/snmp
Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors
  ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests
  OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails
  FragOKs FragFails FragCreates OutTransmits
Ip: 1 64 10 0 5 2 0 0 3 3 0 0 0 0 0 0 0 0 0 5
......
root@qemux86-64:~# cat /proc/net/netstat
......
IpExt: InNoRoutes InTruncatedPkts InMcastPkts OutMcastPkts InBcastPkts
  OutBcastPkts InOctets OutOctets InMcastOctets OutMcastOctets
  InBcastOctets OutBcastOctets InCsumErrors InNoECTPkts InECT1Pkts
  InECT0Pkts InCEPkts ReasmOverlaps
IpExt: 0 0 0 0 0 0 4404 3324 0 0 0 0 0 10 0 0 0 0
----------------------------------------------------------------------
"ForwDatagrams" increase from 1 to 2 and "OutRequests" is keeping 3.
"OutTransmits" increase from 4 to 5 and "OutOctets" increase 1428.

Signed-off-by: Heng Guo <[email protected]>
Reviewed-by: Kun Song <[email protected]>
Reviewed-by: Filip Pudak <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Reported-by: Vitezslav Samel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

* netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout

commit 552705a3650bbf46a22b1adedc1b04181490fc36 upstream.

While the rhashtable set gc runs asynchronously, a race allows it to
collect elements from anonymous sets with timeouts while it is being
released from the commit path.

Mingi Cho originally reported this issue in a different path in 6.1.x
with a pipapo set with low timeouts which is not possible upstream since
7395dfacfff6 ("netfilter: nf_tables: use timestamp to check for set
element timeout").

Fix this by setting on the dead flag for anonymous sets to skip async gc
in this case.

According to 08e4c8c5919f ("netfilter: nf_tables: mark newset as dead on
transaction abort"), Florian plans to accelerate abort path by releasing
objects via workqueue, therefore, this sets on the dead flag for abort
path too.

Cc: [email protected]
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Reported-by: Mingi Cho <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

* netfilter: nf_tables: disallow anonymous set with timeout flag

commit 16603605b667b70da974bea8216c93e7db043bf1 upstream.

Anonymous sets are never used with timeout from userspace, reject this.
Exception to this rule is NFT_SET_EVAL to ensure legacy meters still work.

Cc: [email protected]
Fixes: 761da2935d6e ("netfilter: nf_tables: add set timeout API support")
Reported-by: lonial con <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

* netfilter: nf_tables: reject constant set with timeout

commit 5f4fc4bd5cddb4770ab120ce44f02695c4505562 upstream.

This set combination is weird: it allows for elements to be
added/deleted, but once bound to the rule it cannot be updated anymore.
Eventually, all elements expire, leading to an empty set which cannot
be updated anymore. Reject this flags combination.

Cc: [email protected]
Fixes: 761da2935d6e ("netfilter: nf_tables: add set timeout API support")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

* Drivers: hv: vmbus: Calculate ring buffer size for more efficient use of memory

commit b8209544296edbd1af186e2ea9c648642c37b18c upstream.

The VMBUS_RING_SIZE macro adds space for a ring buffer header to the
requested ring buffer size.  The header size is always 1 page, and so
its size varies based on the PAGE_SIZE for which the kernel is built.
If the requested ring buffer size is a large power-of-2 size and the header
size is small, the resulting size is inefficient in its use of memory.
For example, a 512 Kbyte ring buffer with a 4 Kbyte page size results in
a 516 Kbyte allocation, which is rounded to up 1 Mbyte by the memory
allocator, and wastes 508 Kbytes of memory.

In such situations, the exact size of the ring buffer isn't that important,
and it's OK to allocate the 4 Kbyte header at the beginning of the 512
Kbytes, leaving the ring buffer itself with just 508 Kbytes. The memory
allocation can be 512 Kbytes instead of 1 Mbyte and nothing is wasted.

Update VMBUS_RING_SIZE to implement this approach for "large" ring buffer
sizes.  "Large" is somewhat arbitrarily defined as 8 times the size of
the ring buffer header (which is of size PAGE_SIZE).  For example, for
4 Kbyte PAGE_SIZE, ring buffers of 32 Kbytes and larger use the first
4 Kbytes as the ring buffer header.  For 64 Kbyte PAGE_SIZE, ring buffers
of 512 Kbytes and larger use the first 64 Kbytes as the ring buffer
header.  In both cases, smaller sizes add space for the header so
the ring size isn't reduced too much by using part of the space for
the header.  For example, with a 64 Kbyte page size, we don't want
a 128 Kbyte ring buffer to be reduced to 64 Kbytes by allocating half
of the space for the header.  In such a case, the memory allocation
is less efficient, but it's the best that can be done.

While the new algorithm slightly changes the amount of space allocated
for ring buffers by drivers that use VMBUS_RING_SIZE, the devices aren't
known to be sensitive to small changes in ring buffer size, so there
shouldn't be any effect.

Fixes: c1135c7fd0e9 ("Drivers: hv: vmbus: Introduce types of GPADL")
Fixes: 6941f67ad37d ("hv_netvsc: Calculate correct ring size when PAGE_SIZE is not 4 Kbytes")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218502
Cc: [email protected]
Signed-off-by: Michael Kelley <[email protected]>
Reviewed-by: Saurabh Sengar <[email protected]>
Reviewed-by: Dexuan Cui <[email protected]>
Tested-by: Souradeep Chakrabarti <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

* nouveau: lock the client object tree.

commit b7cc4ff787a572edf2c55caeffaa88cd801eb135 upstream.

It appears the client object tree has no locking unless I've missed
something else. Fix races around adding/removing client objects,
mostly vram bar mappings.

 4562.099306] general protection fault, probably for non-canonical address 0x6677ed422bceb80c: 0000 [#1] PREEMPT SMP PTI
[ 4562.099314] CPU: 2 PID: 23171 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27
[ 4562.099324] Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021
[ 4562.099330] RIP: 0010:nvkm_object_search+0x1d/0x70 [nouveau]
[ 4562.099503] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 48 89 f8 48 85 f6 74 39 48 8b 87 a0 00 00 00 48 85 c0 74 12 <48> 8b 48 f8 48 39 ce 73 15 48 8b 40 10 48 85 c0 75 ee 48 c7 c0 fe
[ 4562.099506] RSP: 0000:ffffa94cc420bbf8 EFLAGS: 00010206
[ 4562.099512] RAX: 6677ed422bceb814 RBX: ffff98108791f400 RCX: ffff9810f26b8f58
[ 4562.099517] RDX: 0000000000000000 RSI: ffff9810f26b9158 RDI: ffff98108791f400
[ 4562.099519] RBP: ffff9810f26b9158 R08: 0000000000000000 R09: 0000000000000000
[ 4562.099521] R10: ffffa94cc420bc48 R11: 0000000000000001 R12: ffff9810f02a7cc0
[ 4562.099526] R13: 0000000000000000 R14: 00000000000000ff R15: 0000000000000007
[ 4562.099528] FS:  00007f629c5017c0(0000) GS:ffff98142c700000(0000) knlGS:0000000000000000
[ 4562.099534] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4562.099536] CR2: 00007f629a882000 CR3: 000000017019e004 CR4: 00000000003706f0
[ 4562.099541] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4562.099542] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4562.099544] Call Trace:
[ 4562.099555]  <TASK>
[ 4562.099573]  ? die_addr+0x36/0x90
[ 4562.099583]  ? exc_general_protection+0x246/0x4a0
[ 4562.099593]  ? asm_exc_general_protection+0x26/0x30
[ 4562.099600]  ? nvkm_object_search+0x1d/0x70 [nouveau]
[ 4562.099730]  nvkm_ioctl+0xa1/0x250 [nouveau]
[ 4562.099861]  nvif_object_map_handle+0xc8/0x180 [nouveau]
[ 4562.099986]  nouveau_ttm_io_mem_reserve+0x122/0x270 [nouveau]
[ 4562.100156]  ? dma_resv_test_signaled+0x26/0xb0
[ 4562.100163]  ttm_bo_vm_fault_reserved+0x97/0x3c0 [ttm]
[ 4562.100182]  ? __mutex_unlock_slowpath+0x2a/0x270
[ 4562.100189]  nouveau_ttm_fault+0x69/0xb0 [nouveau]
[ 4562.100356]  __do_fault+0x32/0x150
[ 4562.100362]  do_fault+0x7c/0x560
[ 4562.100369]  __handle_mm_fault+0x800/0xc10
[ 4562.100382]  handle_mm_fault+0x17c/0x3e0
[ 4562.100388]  do_user_addr_fault+0x208/0x860
[ 4562.100395]  exc_page_fault+0x7f/0x200
[ 4562.100402]  asm_exc_page_fault+0x26/0x30
[ 4562.100412] RIP: 0033:0x9b9870
[ 4562.100419] Code: 85 a8 f7 ff ff 8b 8d 80 f7 ff ff 89 08 e9 18 f2 ff ff 0f 1f 84 00 00 00 00 00 44 89 32 e9 90 fa ff ff 0f 1f 84 00 00 00 00 00 <44> 89 32 e9 f8 f1 ff ff 0f 1f 84 00 00 00 00 00 66 44 89 32 e9 e7
[ 4562.100422] RSP: 002b:00007fff9ba2dc70 EFLAGS: 00010246
[ 4562.100426] RAX: 0000000000000004 RBX: 000000000dd65e10 RCX: 000000fff0000000
[ 4562.100428] RDX: 00007f629a882000 RSI: 00007f629a882000 RDI: 0000000000000066
[ 4562.100432] RBP: 00007fff9ba2e570 R08: 0000000000000000 R09: 0000000123ddf000
[ 4562.100434] R10: 0000000000000001 R11: 0000000000000246 R12: 000000007fffffff
[ 4562.100436] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 4562.100446]  </TASK>
[ 4562.100448] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink cmac bnep sunrpc iwlmvm intel_rapl_msr intel_rapl_common snd_sof_pci_intel_cnl x86_pkg_temp_thermal intel_powerclamp snd_sof_intel_hda_common mac80211 coretemp snd_soc_acpi_intel_match kvm_intel snd_soc_acpi snd_soc_hdac_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof_intel_hda_mlink snd_sof_intel_hda snd_sof kvm snd_sof_utils snd_soc_core snd_hda_codec_realtek libarc4 snd_hda_codec_generic snd_compress snd_hda_ext_core vfat fat snd_hda_intel snd_intel_dspcfg irqbypass iwlwifi snd_hda_codec snd_hwdep snd_hda_core btusb btrtl mei_hdcp iTCO_wdt rapl mei_pxp btintel snd_seq iTCO_vendor_support btbcm snd_seq_device intel_cstate bluetooth snd_pcm cfg80211 intel_wmi_thunderbolt wmi_bmof intel_uncore snd_timer mei_me snd ecdh_generic i2c_i801
[ 4562.100541]  ecc mei i2c_smbus soundcore rfkill intel_pch_thermal acpi_pad zram nouveau drm_ttm_helper ttm gpu_sched i2c_algo_bit drm_gpuvm drm_exec mxm_wmi drm_display_helper drm_kms_helper drm crct10dif_pclmul crc32_pclmul nvme e1000e crc32c_intel nvme_core ghash_clmulni_intel video wmi pinctrl_cannonlake ip6_tables ip_tables fuse
[ 4562.100616] ---[ end trace 0000000000000000 ]---

Signed-off-by: Dave Airlie <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

* drm/nouveau: fix stale locked mutex in nouveau_gem_ioctl_pushbuf

commit daf8739c3322a762ce84f240f50e0c39181a41ab upstream.

If VM_BIND is enabled on the client the legacy submission ioctl can't be
used, however if a client tries to do so regardless it will return an
error. In this case the clients mutex remained unlocked leading to a
deadlock inside nouveau_drm_postclose or any other nouveau ioctl call.

Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI")
Cc: Danilo Krummrich <[email protected]>
Cc: <[email protected]> # v6.6+
Signed-off-by: Karol Herbst <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Reviewed-by: Danilo Krummrich <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

* crypto: rk3288 - Fix use after free in unprepare

commit c0afb6b88fbbc177fa322a835f874be217bffe45 upstream.

The unprepare call must be carried out before the finalize call
as the latter can free the request.

Fixes: c66c17a0f69b ("crypto: rk3288 - Remove prepare/unprepare request")
Reported-by: Andrey Skvortsov <[email protected]>
Cc: <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Reviewed-by: Andrey Skvortsov <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

* crypto: sun8i-ce - Fix use after free in unprepare

commit 183420038444547c149a0fc5f58e792c2752860c upstream.

sun8i_ce_cipher_unprepare should be called before
crypto_finalize_skcipher_request, because client callbacks may
immediately free memory, that isn't needed anymore. But it will be
used by unprepare after free. Before removing prepare/unprepare
callbacks it was handled by crypto engine in crypto_finalize_request.

Usually that results in a pointer dereference problem during a in
crypto selftest.
 Unable to handle kernel NULL pointer dereference at
                                      virtual address 0000000000000030
 Mem abort info:
   ESR = 0x0000000096000004
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
   FSC = 0x04: level 0 translation fault
 Data abort info:
   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
 user pgtable: 4k pages, 48-bit VAs, pgdp=000000004716d000
 [0000000000000030] pgd=0000000000000000, p4d=0000000000000000
 Internal error: Oops: 0000000096000004 [#1] SMP

This problem is detected by KASAN as well.
 ==================================================================
 BUG: KASAN: slab-use-after-free in sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce]
 Read of size 8 at addr ffff00000dcdc040 by task 1c15000.crypto-/373

 Hardware name: Pine64 PinePhone (1.2) (DT)
 Call trace:
  dump_backtrace+0x9c/0x128
  show_stack+0x20/0x38
  dump_stack_lvl+0x48/0x60
  print_report+0xf8/0x5d8
  kasan_report+0x90/0xd0
  __asan_load8+0x9c/0xc0
  sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce]
  crypto_pump_work+0x354/0x620 [crypto_engine]
  kthread_worker_fn+0x244/0x498
  kthread+0x168/0x178
  ret_from_fork+0x10/0x20

 Allocated by task 379:
  kasan_save_stack+0x3c/0x68
  kasan_set_track+0x2c/0x40
  kasan_save_alloc_info+0x24/0x38
  __kasan_kmalloc+0xd4/0xd8
  __kmalloc+0x74/0x1d0
  alg_test_skcipher+0x90/0x1f0
  alg_test+0x24c/0x830
  cryptomgr_test+0x38/0x60
  kthread+0x168/0x178
  ret_from_fork+0x10/0x20

 Freed by task 379:
  kasan_save_stack+0x3c/0x68
  kasan_set_track+0x2c/0x40
  kasan_save_free_info+0x38/0x60
  __kasan_slab_free+0x100/0x170
  slab_free_freelist_hook+0xd4/0x1e8
  __kmem_cache_free+0x15c/0x290
  kfree+0x74/0x100
  kfree_sensitive+0x80/0xb0
  alg_test_skcipher+0x12c/0x1f0
  alg_test+0x24c/0x830
  cryptomgr_test+0x38/0x60
  kthread+0x168/0x178
  ret_from_fork+0x10/0x20

 The buggy address belongs to the object at ffff00000dcdc000
  which belongs to the cache kmalloc-256 of size 256
 The buggy address is located 64 bytes inside of
  freed 256-byte region [ffff00000dcdc000, ffff00000dcdc100)

Signed-off-by: Andrey Skvortsov <[email protected]>
Fixes: 4136212ab18e ("crypto: sun8i-ce - Remove prepare/unprepare request")
Cc: <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

* xfrm: Avoid clang fortify warning in copy_to_user_tmpl()

commit 1a807e46aa93ebad1dfbed4f82dc3bf779423a6e upstream.

After a couple recent changes in LLVM, there is a warning (or error with
CONFIG_WERROR=y or W=e) from the compile time fortify source routines,
specifically the memset() in copy_to_user_tmpl().

  In file included from net/xfrm/xfrm_user.c:14:
  ...
  include/linux/fortify-string.h:438:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
    438 |                         __write_overflow_field(p_size_field, size);
        |                         ^
  1 error generated.

While ->xfrm_nr has been validated against XFRM_MAX_DEPTH when its value
is first assigned in copy_templates() by calling validate_tmpl() first
(so there should not be any issue in practice), LLVM/clang cannot really
deduce that across the boundaries of these functions. Without that
knowledge, it cannot assume that the loop stops before i is greater than
XFRM_MAX_DEPTH, which would indeed result a stack buffer overflow in the
memset().

To make the bounds of ->xfrm_nr clear to the compiler and add additional
defense in case copy_to_user_tmpl() is ever used in a path where
->xfrm_nr has not been properly validated against XFRM_MAX_DEPTH first,
add an explicit bound check and early return, which clears up the
warning.

Cc: [email protected]
Link: https://github.com/ClangBuiltLinux/linux/issues/1985
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

* mm, mmap: fix vma_merge() case 7 with vma_ops->close

commit fc0c8f9089c20d198d8fe51ddc28bfa1af588dce upstream.

When debugging issues with a workload using SysV shmem, Michal Hocko has
come up with a reproducer that shows how a series of mprotect() operations
can result in an elevated shm_nattch and thus leak of the resource.

The problem is caused by wrong assumptions in vma_merge() commit
714965ca8252 ("mm/mmap: start distinguishing if vma can be removed in
mergeability test").  The shmem vmas have a vma_ops->close callback that
decrements shm_nattch, and we remove the vma without calling it.

vma_merge() has thus historically avoided merging vma's with
vma_ops->close and commit 714965ca8252 was supposed to keep it that way.
It relaxed the checks for vma_ops->close in can_vma_merge_after() assuming
that it is never called on a vma that would…
matrix-wsk added a commit that referenced this pull request Apr 24, 2024
@matrix-wsk @mosomate
@paulmckrcu @hubcapsc @arndb @takaswie @tmlind @jpoimboe @crojewsk-intel @zhangyi089 @AMD-aric @KobyElbaz @jhnikula @dtor @srishanm @daimngo @dsd @captain5050 @tzanussi @nergzd723 @RSmirnov512 @mbpatil369 @LegoLivesMatter @soyersoyer @onenowy @Blafy @sandip4n @JimmyJichi @rbmarliere @ndowzmgmc3 @rodan @quic-jhugo @htejun @lweiss-fairphone @mgrzeschik @apandit @andy-shev @westeri @ColinIanKing @konradybcio @royger @axboe @MaxKellermann @iBug @crawfxrd @jackpot51 @ahrehman @ardbiesheuvel @ndufresne @yunfei-mtk @kees @corngood @gwendalcr @airlied @Vudentz @kovalev0 @bp3tk0v @gregkh @smfrench @ipylypiv @damien-lemoal @peytolee @ecsv @neilbrown @lxbsz @leitao @YuKuai-huawei @rostedt @dmantipov @timhuang-amd @nloomans @jwrdegoede @anna-marialx @kdave @aakoskin @jenswi-linaro @cris-ma @davejiang @Gateworks @bebarino @lumag @nxpfrankli @kyet @alexconst @igsilya @ptesarik @edumazet @vikasbrcm @pavanchebbi @raagjadav @q2ven @emusln @brettcreeley @apusaka @mosheshemesh2 @shayshyi @mliang-pure @cjubran @Binary-Eater @Danielmachon @arinc9 @mmhal @davidarinzon @lucasdemarchi @kpoosa @XucSh @LuBaolu @isilence @boryas @mhiramat @alexw65500 @kwachows @jlawryno @zackr @vsyrjala @hkasivis @jammyaspeed @bbrezillon @jhovold @namhyung @sean-jc @oleg-nesterov @johnstultz-work @nathanchance @AdamCDunlap @amir73il @alexdeucher @yifancom
[Deepin-Kernel-SIG][Upstream][kernel-rolling]Update to 6.8.7 (#103)
3445541 
* ASoC: Intel: common: DMI remap for rebranded Intel NUC M15 (LAPRC710) laptops

[ Upstream commit c13e03126a5be90781084437689724254c8226e1 ]

Added DMI quirk to handle the rebranded variants of Intel NUC M15
(LAPRC710) laptops. The DMI matching is based on motherboard
attributes.

Link: https://github.com/thesofproject/linux/issues/4218
Signed-off-by: Máté Mosonyi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* rcu/nocb: Fix WARN_ON_ONCE() in the rcu_nocb_bypass_lock()

[ Upstream commit dda98810b552fc6bf650f4270edeebdc2f28bd3f ]

For the kernels built with CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y and
CONFIG_RCU_LAZY=y, the following scenarios will trigger WARN_ON_ONCE()
in the rcu_nocb_bypass_lock() and rcu_nocb_wait_contended() functions:

        CPU2                                               CPU11
kthread
rcu_nocb_cb_kthread                                       ksys_write
rcu_do_batch                                              vfs_write
rcu_torture_timer_cb                                      proc_sys_write
__kmem_cache_free                                         proc_sys_call_handler
kmemleak_free                                             drop_caches_sysctl_handler
delete_object_full                                        drop_slab
__delete_object                                           shrink_slab
put_object                                                lazy_rcu_shrink_scan
call_rcu                                                  rcu_nocb_flush_bypass
__call_rcu_commn                                            rcu_nocb_bypass_lock
                                                            raw_spin_trylock(&rdp->nocb_bypass_lock) fail
                                                            atomic_inc(&rdp->nocb_lock_contended);
rcu_nocb_wait_contended                                     WARN_ON_ONCE(smp_processor_id() != rdp->cpu);
 WARN_ON_ONCE(atomic_read(&rdp->nocb_lock_contended))                                          |
                            |_ _ _ _ _ _ _ _ _ _same rdp and rdp->cpu != 11_ _ _ _ _ _ _ _ _ __|

Reproduce this bug with "echo 3 > /proc/sys/vm/drop_caches".

This commit therefore uses rcu_nocb_try_flush_bypass() instead of
rcu_nocb_flush_bypass() in lazy_rcu_shrink_scan().  If the nocb_bypass
queue is being flushed, then rcu_nocb_try_flush_bypass will return
directly.

Signed-off-by: Zqiang <[email protected]>
Reviewed-by: Joel Fernandes (Google) <[email protected]>
Reviewed-by: Frederic Weisbecker <[email protected]>
Reviewed-by: Paul E. McKenney <[email protected]>
Signed-off-by: Boqun Feng <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* rcu-tasks: Repair RCU Tasks Trace quiescence check

[ Upstream commit 2eb52fa8900e642b3b5054c4bf9776089d2a935f ]

The context-switch-time check for RCU Tasks Trace quiescence expects
current->trc_reader_special.b.need_qs to be zero, and if so, updates
it to TRC_NEED_QS_CHECKED.  This is backwards, because if this value
is zero, there is no RCU Tasks Trace grace period in flight, an thus
no need for a quiescent state.  Instead, when a grace period starts,
this field is set to TRC_NEED_QS.

This commit therefore changes the check from zero to TRC_NEED_QS.

Reported-by: Steven Rostedt <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Tested-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Boqun Feng <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* Julia Lawall reported this null pointer dereference, this should fix it.

[ Upstream commit 9bf93dcfc453fae192fe5d7874b89699e8f800ac ]

Signed-off-by: Mike Marshall <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* media: sta2x11: fix irq handler cast

[ Upstream commit 3de49ae81c3a0f83a554ecbce4c08e019f30168e ]

clang-16 warns about casting incompatible function pointers:

drivers/media/pci/sta2x11/sta2x11_vip.c:1057:6: error: cast from 'irqreturn_t (*)(int, struct sta2x11_vip *)' (aka 'enum irqreturn (*)(int, struct sta2x11_vip *)') to 'irq_handler_t' (aka 'enum irqreturn (*)(int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]

Change the prototype of the irq handler to the regular version with a
local variable to adjust the argument type.

Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
[hverkuil: update argument documentation]
Signed-off-by: Sasha Levin <[email protected]>

* ALSA: firewire-lib: handle quirk to calculate payload quadlets as data block counter

[ Upstream commit 4a486439d2ca85752c46711f373b6ddc107bb35d ]

Miglia Harmony Audio (OXFW970) has a quirk to put the number of
accumulated quadlets in CIP payload into the dbc field of CIP header.

This commit handles the quirk in the packet processing layer.

Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* drm/panel: simple: Add BOE BP082WX1-100 8.2" panel

[ Upstream commit dc90214ff58be575fdceb549f901506cdef5d093 ]

The BOE BP082WX1-100 is a 8.2" panel similar to the 10.1" panel
BP101WX1-100. Both panels use the same timings.

Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>

* x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o

[ Upstream commit b388e57d4628eb22782bdad4cd5b83ca87a1b7c9 ]

For CONFIG_RETHUNK kernels, objtool annotates all the function return
sites so they can be patched during boot.  By design, after
apply_returns() is called, all tail-calls to the compiler-generated
default return thunk (__x86_return_thunk) should be patched out and
replaced with whatever's needed for any mitigations (or lack thereof).

The commit

  4461438a8405 ("x86/retpoline: Ensure default return thunk isn't used at runtime")

adds a runtime check and a WARN_ONCE() if the default return thunk ever
gets executed after alternatives have been applied.  This warning is
a sanity check to make sure objtool and apply_returns() are doing their
job.

As Nathan reported, that check found something:

  Unpatched return thunk in use. This should not happen!
  WARNING: CPU: 0 PID: 1 at arch/x86/kernel/cpu/bugs.c:2856 __warn_thunk+0x27/0x40
  RIP: 0010:__warn_thunk+0x27/0x40
  Call Trace:
   <TASK>
   ? show_regs
   ? __warn
   ? __warn_thunk
   ? report_bug
   ? console_unlock
   ? handle_bug
   ? exc_invalid_op
   ? asm_exc_invalid_op
   ? ia32_binfmt_init
   ? __warn_thunk
   warn_thunk_thunk
   do_one_initcall
   kernel_init_freeable
   ? __pfx_kernel_init
   kernel_init
   ret_from_fork
   ? __pfx_kernel_init
   ret_from_fork_asm
   </TASK>

Boris debugged to find that the unpatched return site was in
init_vdso_image_64(), and its translation unit wasn't being analyzed by
objtool, so it never got annotated.  So it got ignored by
apply_returns().

This is only a minor issue, as this function is only called during boot.
Still, objtool needs full visibility to the kernel.  Fix it by enabling
objtool on vdso-image-{32,64}.o.

Note this problem can only be seen with !CONFIG_X86_KERNEL_IBT, as that
requires objtool to run individually on all translation units rather on
vmlinux.o.

  [ bp: Massage commit message. ]

Reported-by: Nathan Chancellor <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>

* ASoC: Intel: avs: Populate board selection with new I2S entries

[ Upstream commit 5b417fe0cded0b5917683398e6519aae8045cd40 ]

Update board selection with tables specifying supported I2S
configurations. DMIC/HDAudio board selection require no update as
dmic/hdaudio machine boards are generic and not tied to any specific
codec.

Reviewed-by: Amadeusz Sławiński <[email protected]>
Signed-off-by: Cezary Rojewski <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* ext4: add a hint for block bitmap corrupt state in mb_groups

[ Upstream commit 68ee261fb15457ecb17e3683cb4e6a4792ca5b71 ]

If one group is marked as block bitmap corrupted, its free blocks cannot
be used and its free count is also deducted from the global
sbi->s_freeclusters_counter. User might be confused about the absent
free space because we can't query the information about corrupted block
groups except unreliable error messages in syslog. So add a hint to show
block bitmap corrupted groups in mb_groups.

Signed-off-by: Zhang Yi <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* ext4: forbid commit inconsistent quota data when errors=remount-ro

[ Upstream commit d8b945fa475f13d787df00c26a6dc45a3e2e1d1d ]

There's issue as follows When do IO fault injection test:
Quota error (device dm-3): find_block_dqentry: Quota for id 101 referenced but not present
Quota error (device dm-3): qtree_read_dquot: Can't read quota structure for id 101
Quota error (device dm-3): do_check_range: Getting block 2021161007 out of range 1-186
Quota error (device dm-3): qtree_read_dquot: Can't read quota structure for id 661

Now, ext4_write_dquot()/ext4_acquire_dquot()/ext4_release_dquot() may commit
inconsistent quota data even if process failed. This may lead to filesystem
corruption.
To ensure filesystem consistent when errors=remount-ro there is need to call
ext4_handle_error() to abort journal.

Signed-off-by: Ye Bin <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* drm/amd/display: Fix nanosec stat overflow

[ Upstream commit 14d68acfd04b39f34eea7bea65dda652e6db5bf6 ]

[Why]
Nanosec stats can overflow on long running systems potentially causing
statistic logging issues.

[How]
Use 64bit types for nanosec stats to ensure no overflow.

Reviewed-by: Rodrigo Siqueira <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Aric Cyr <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* accel/habanalabs: increase HL_MAX_STR to 64 bytes to avoid warnings

[ Upstream commit 8c075401f2dbda43600c61f780a165abde77877a ]

Fix a warning of a buffer overflow:
‘snprintf’ output between 38 and 47 bytes into a destination of size 32

Signed-off-by: Koby Elbaz <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC

[ Upstream commit c94612a72ac87b0337a0d85b9263266776ed4190 ]

I believe RX FIFO depth define 0 is incorrect on Wangxun 10Gb NIC. It
must be at least 1 since code is able to read received data from the
DW_IC_DATA_CMD register.

For now this define is irrelevant since the txgbe_i2c_dw_xfer_quirk()
doesn't use the rx_fifo_depth member variable of struct dw_i2c_dev but
is needed when converting code into generic polling mode implementation.

Signed-off-by: Jarkko Nikula <[email protected]>
Tested-by: Jiawen Wu <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* HID: input: avoid polling stylus battery on Chromebook Pompom

[ Upstream commit 9a5b1521e2d0d7ace70c6e5eed073babcec91409 ]

Internal touchscreen on Trogdor Pompom (AKA Dynabook Chromebook C1)
supports USI stylus. Unfortunately the HID descriptor for the stylus
interface does not contain "Stylus" physical collection, which makes
the kernel to try and pull battery information, resulting in errors.

Apply HID_BATTERY_QUIRK_AVOID_QUERY to the device.

Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* drm/amd/amdgpu: Fix potential ioremap() memory leaks in amdgpu_device_init()

[ Upstream commit eb4f139888f636614dab3bcce97ff61cefc4b3a7 ]

This ensures that the memory mapped by ioremap for adev->rmmio, is
properly handled in amdgpu_device_init(). If the function exits early
due to an error, the memory is unmapped. If the function completes
successfully, the memory remains mapped.

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:4337 amdgpu_device_init() warn: 'adev->rmmio' from ioremap() not released on lines: 4035,4045,4051,4058,4068,4337

Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* drm: Check output polling initialized before disabling

[ Upstream commit 5abffb66d12bcac84bf7b66389c571b8bb6e82bd ]

In drm_kms_helper_poll_disable() check if output polling
support is initialized before disabling polling. If not flag
this as a warning.
Additionally in drm_mode_config_helper_suspend() and
drm_mode_config_helper_resume() calls, that re the callers of these
functions, avoid invoking them if polling is not initialized.
For drivers like hyperv-drm, that do not initialize connector
polling, if suspend is called without this check, it leads to
suspend failure with following stack
[  770.719392] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  770.720592] printk: Suspending console(s) (use no_console_suspend to debug)
[  770.948823] ------------[ cut here ]------------
[  770.948824] WARNING: CPU: 1 PID: 17197 at kernel/workqueue.c:3162 __flush_work.isra.0+0x212/0x230
[  770.948831] Modules linked in: rfkill nft_counter xt_conntrack xt_owner udf nft_compat crc_itu_t nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink vfat fat mlx5_ib ib_uverbs ib_core mlx5_core intel_rapl_msr intel_rapl_common kvm_amd ccp mlxfw kvm psample hyperv_drm tls drm_shmem_helper drm_kms_helper irqbypass pcspkr syscopyarea sysfillrect sysimgblt hv_balloon hv_utils joydev drm fuse xfs libcrc32c pci_hyperv pci_hyperv_intf sr_mod sd_mod cdrom t10_pi sg hv_storvsc scsi_transport_fc hv_netvsc serio_raw hyperv_keyboard hid_hyperv crct10dif_pclmul crc32_pclmul crc32c_intel hv_vmbus ghash_clmulni_intel dm_mirror dm_region_hash dm_log dm_mod
[  770.948863] CPU: 1 PID: 17197 Comm: systemd-sleep Not tainted 5.14.0-362.2.1.el9_3.x86_64 #1
[  770.948865] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022
[  770.948866] RIP: 0010:__flush_work.isra.0+0x212/0x230
[  770.948869] Code: 8b 4d 00 4c 8b 45 08 89 ca 48 c1 e9 04 83 e2 08 83 e1 0f 83 ca 02 89 c8 48 0f ba 6d 00 03 e9 25 ff ff ff 0f 0b e9 4e ff ff ff <0f> 0b 45 31 ed e9 44 ff ff ff e8 8f 89 b2 00 66 66 2e 0f 1f 84 00
[  770.948870] RSP: 0018:ffffaf4ac213fb10 EFLAGS: 00010246
[  770.948871] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8c992857
[  770.948872] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff9aad82b00330
[  770.948873] RBP: ffff9aad82b00330 R08: 0000000000000000 R09: ffff9aad87ee3d10
[  770.948874] R10: 0000000000000200 R11: 0000000000000000 R12: ffff9aad82b00330
[  770.948874] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001
[  770.948875] FS:  00007ff1b2f6bb40(0000) GS:ffff9aaf37d00000(0000) knlGS:0000000000000000
[  770.948878] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  770.948878] CR2: 0000555f345cb666 CR3: 00000001462dc005 CR4: 0000000000370ee0
[  770.948879] Call Trace:
[  770.948880]  <TASK>
[  770.948881]  ? show_trace_log_lvl+0x1c4/0x2df
[  770.948884]  ? show_trace_log_lvl+0x1c4/0x2df
[  770.948886]  ? __cancel_work_timer+0x103/0x190
[  770.948887]  ? __flush_work.isra.0+0x212/0x230
[  770.948889]  ? __warn+0x81/0x110
[  770.948891]  ? __flush_work.isra.0+0x212/0x230
[  770.948892]  ? report_bug+0x10a/0x140
[  770.948895]  ? handle_bug+0x3c/0x70
[  770.948898]  ? exc_invalid_op+0x14/0x70
[  770.948899]  ? asm_exc_invalid_op+0x16/0x20
[  770.948903]  ? __flush_work.isra.0+0x212/0x230
[  770.948905]  __cancel_work_timer+0x103/0x190
[  770.948907]  ? _raw_spin_unlock_irqrestore+0xa/0x30
[  770.948910]  drm_kms_helper_poll_disable+0x1e/0x40 [drm_kms_helper]
[  770.948923]  drm_mode_config_helper_suspend+0x1c/0x80 [drm_kms_helper]
[  770.948933]  ? __pfx_vmbus_suspend+0x10/0x10 [hv_vmbus]
[  770.948942]  hyperv_vmbus_suspend+0x17/0x40 [hyperv_drm]
[  770.948944]  ? __pfx_vmbus_suspend+0x10/0x10 [hv_vmbus]
[  770.948951]  dpm_run_callback+0x4c/0x140
[  770.948954]  __device_suspend_noirq+0x74/0x220
[  770.948956]  dpm_noirq_suspend_devices+0x148/0x2a0
[  770.948958]  dpm_suspend_end+0x54/0xe0
[  770.948960]  create_image+0x14/0x290
[  770.948963]  hibernation_snapshot+0xd6/0x200
[  770.948964]  hibernate.cold+0x8b/0x1fb
[  770.948967]  state_store+0xcd/0xd0
[  770.948969]  kernfs_fop_write_iter+0x124/0x1b0
[  770.948973]  new_sync_write+0xff/0x190
[  770.948976]  vfs_write+0x1ef/0x280
[  770.948978]  ksys_write+0x5f/0xe0
[  770.948979]  do_syscall_64+0x5c/0x90
[  770.948981]  ? syscall_exit_work+0x103/0x130
[  770.948983]  ? syscall_exit_to_user_mode+0x12/0x30
[  770.948985]  ? do_syscall_64+0x69/0x90
[  770.948986]  ? do_syscall_64+0x69/0x90
[  770.948987]  ? do_user_addr_fault+0x1d6/0x6a0
[  770.948989]  ? do_syscall_64+0x69/0x90
[  770.948990]  ? exc_page_fault+0x62/0x150
[  770.948992]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[  770.948995] RIP: 0033:0x7ff1b293eba7
[  770.949010] Code: 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[  770.949011] RSP: 002b:00007ffde3912128 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  770.949012] RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007ff1b293eba7
[  770.949013] RDX: 0000000000000005 RSI: 00007ffde3912210 RDI: 0000000000000004
[  770.949014] RBP: 00007ffde3912210 R08: 000055d7dd4c9510 R09: 00007ff1b29b14e0
[  770.949014] R10: 00007ff1b29b13e0 R11: 0000000000000246 R12: 0000000000000005
[  770.949015] R13: 000055d7dd4c53e0 R14: 0000000000000005 R15: 00007ff1b29f69e0
[  770.949016]  </TASK>
[  770.949017] ---[ end trace e6fa0618bfa2f31d ]---

Built-on: Rhel9, Ubuntu22
Signed-off-by: Shradha Gupta <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/1706856208-9617-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Sasha Levin <[email protected]>

* drm: Check polling initialized before enabling in drm_helper_probe_single_connector_modes

commit 048a36d8a6085bbd8ab9e5794b713b92ac986450 upstream.

In function drm_helper_probe_single_connector_modes() when we enable
polling again, if it is already uninitialized, a warning is reported.
This patch fixes the warning message by checking if poll is initialized
before enabling it.

Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-lkp/[email protected]
Signed-off-by: Shradha Gupta <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/1706856224-9725-1-git-send-email-shradhagupta@linux.microsoft.com
Cc: Holger Hoffstätte <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

* SUNRPC: increase size of rpc_wait_queue.qlen from unsigned short to unsigned int

[ Upstream commit 2c35f43b5a4b9cdfaa6fdd946f5a212615dac8eb ]

When the NFS client is under extreme load the rpc_wait_queue.qlen counter
can be overflowed. Here is an instant of the backlog queue overflow in a
real world environment shown by drgn helper:

rpc_task_stats(rpc_clnt):
-------------------------
rpc_clnt: 0xffff92b65d2bae00
rpc_xprt: 0xffff9275db64f000
  Queue:  sending[64887] pending[524] backlog[30441] binding[0]
XMIT task: 0xffff925c6b1d8e98
     WRITE: 750654
        __dta_call_status_580: 65463
        __dta_call_transmit_status_579: 1
        call_reserveresult: 685189
        nfs_client_init_is_complete: 1
    COMMIT: 584
        call_reserveresult: 573
        __dta_call_status_580: 11
    ACCESS: 1
        __dta_call_status_580: 1
   GETATTR: 10
        __dta_call_status_580: 4
        call_reserveresult: 6
751249 tasks for server 111.222.333.444
Total tasks: 751249

count_rpc_wait_queues(xprt):
----------------------------
**** rpc_xprt: 0xffff9275db64f000 num_reqs: 65511
wait_queue: xprt_binding[0] cnt: 0
wait_queue: xprt_binding[1] cnt: 0
wait_queue: xprt_binding[2] cnt: 0
wait_queue: xprt_binding[3] cnt: 0
rpc_wait_queue[xprt_binding].qlen: 0 maxpriority: 0
wait_queue: xprt_sending[0] cnt: 0
wait_queue: xprt_sending[1] cnt: 64887
wait_queue: xprt_sending[2] cnt: 0
wait_queue: xprt_sending[3] cnt: 0
rpc_wait_queue[xprt_sending].qlen: 64887 maxpriority: 3
wait_queue: xprt_pending[0] cnt: 524
wait_queue: xprt_pending[1] cnt: 0
wait_queue: xprt_pending[2] cnt: 0
wait_queue: xprt_pending[3] cnt: 0
rpc_wait_queue[xprt_pending].qlen: 524 maxpriority: 0
wait_queue: xprt_backlog[0] cnt: 0
wait_queue: xprt_backlog[1] cnt: 685801
wait_queue: xprt_backlog[2] cnt: 0
wait_queue: xprt_backlog[3] cnt: 0
rpc_wait_queue[xprt_backlog].qlen: 30441 maxpriority: 3 [task cnt mismatch]

There is no effect on operations when this overflow occurs. However
it causes confusion when trying to diagnose the performance problem.

Signed-off-by: Dai Ngo <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* PCI: Disable D3cold on Asus B1400 PCI-NVMe bridge

[ Upstream commit cdea98bf1faef23166262825ce44648be6ebff42 ]

The Asus B1400 with original shipped firmware versions and VMD disabled
cannot resume from suspend: the NVMe device becomes unresponsive and
inaccessible.

This appears to be an untested D3cold transition by the vendor; Intel
socwatch shows that Windows leaves the NVMe device and parent bridge in D0
during suspend, even though these firmware versions have StorageD3Enable=1.

The NVMe device and parent PCI bridge both share the same "PXP" ACPI power
resource, which gets turned off as both devices are put into D3cold during
suspend. The _OFF() method calls DL23() which sets a L23E bit at offset
0xe2 into the PCI configuration space for this root port.  This is the
specific write that the _ON() routine is unable to recover from. This
register is not documented in the public chipset datasheet.

Disallow D3cold on the PCI bridge to enable successful suspend/resume.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215742
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Drake <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Jian-Hong Pan <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* Revert "ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default"

[ Upstream commit cb98555fcd8eee98c30165537c7e394f3a66e809 ]

This reverts commit d52848620de00cde4a3a5df908e231b8c8868250, which was
originally put in place to work around a s2idle failure on this platform
where the NVMe device was inaccessible upon resume.

After extended testing, we found that the firmware's implementation of S3
is buggy and intermittently fails to wake up the system. We need to revert
to s2idle mode.

The NVMe issue has now been solved more precisely in the commit titled
"PCI: Disable D3cold on Asus B1400 PCI-NVMe bridge"

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215742
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Drake <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Jian-Hong Pan <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* libperf evlist: Avoid out-of-bounds access

[ Upstream commit 1947b92464c3268381604bbe2ac977a3fd78192f ]

Parallel testing appears to show a race between allocating and setting
evsel ids. As there is a bounds check on the xyarray it yields a segv
like:

```
AddressSanitizer:DEADLYSIGNAL

=================================================================

==484408==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000010

==484408==The signal is caused by a WRITE memory access.

==484408==Hint: address points to the zero page.

    #0 0x55cef5d4eff4 in perf_evlist__id_hash tools/lib/perf/evlist.c:256
    #1 0x55cef5d4f132 in perf_evlist__id_add tools/lib/perf/evlist.c:274
    #2 0x55cef5d4f545 in perf_evlist__id_add_fd tools/lib/perf/evlist.c:315
    #3 0x55cef5a1923f in store_evsel_ids util/evsel.c:3130
    #4 0x55cef5a19400 in evsel__store_ids util/evsel.c:3147
    #5 0x55cef5888204 in __run_perf_stat tools/perf/builtin-stat.c:832
    #6 0x55cef5888c06 in run_perf_stat tools/perf/builtin-stat.c:960
    #7 0x55cef58932db in cmd_stat tools/perf/builtin-stat.c:2878
...
```

Avoid this crash by early exiting the perf_evlist__id_add_fd and
perf_evlist__id_add is the access is out-of-bounds.

Signed-off-by: Ian Rogers <[email protected]>
Cc: Yang Jihong <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>

* crypto: iaa - Fix async_disable descriptor leak

[ Upstream commit 262534ddc88dfea7474ed18adfecf856e4fbe054 ]

The disable_async paths of iaa_compress/decompress() don't free idxd
descriptors in the async_disable case. Currently this only happens in
the testcases where req->dst is set to null. Add a test to free them
in those paths.

Signed-off-by: Tom Zanussi <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* input/touchscreen: imagis: Correct the maximum touch area value

[ Upstream commit 54a62ed17a705ef1ac80ebca2b62136b19243e19 ]

As specified in downstream IST3038B driver and proved by testing,
the correct maximum reported value of touch area is 16.

Signed-off-by: Markuss Broks <[email protected]>
Signed-off-by: Karel Balej <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* drivers/perf: hisi: Enable HiSilicon Erratum 162700402 quirk for HIP09

[ Upstream commit e10b6976f6b9afdf3564f88c851e42d139bb19c0 ]

HiSilicon UC PMU v2 suffers the erratum 162700402 that the PMU counter
cannot be set due to the lack of clock under power saving mode. This will
lead to error or inaccurate counts. The clock can be enabled by the PMU
global enabling control.

This patch tries to fix this by set the UC PMU enable before set event
period to turn on the clock, and then restore the UC PMU configuration.
The counter register can hold its value without a clock.

Signed-off-by: Junhao He <[email protected]>
Reviewed-by: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* block: prevent division by zero in blk_rq_stat_sum()

[ Upstream commit 93f52fbeaf4b676b21acfe42a5152620e6770d02 ]

The expression dst->nr_samples + src->nr_samples may
have zero value on overflow. It is necessary to add
a check to avoid division by zero.

Found by Linux Verification Center (linuxtesting.org) with Svace.

Signed-off-by: Roman Smirnov <[email protected]>
Reviewed-by: Sergey Shtylyov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* RDMA/cm: add timeout to cm_destroy_id wait

[ Upstream commit 96d9cbe2f2ff7abde021bac75eafaceabe9a51fa ]

Add timeout to cm_destroy_id, so that userspace can trigger any data
collection that would help in analyzing the cause of delay in destroying
the cm_id.

New noinline function helps dtrace/ebpf programs to hook on to it.
Existing functionality isn't changed except triggering a probe-able new
function at every timeout interval.

We have seen cases where CM messages stuck with MAD layer (either due to
software bug or faulty HCA), leading to cm_id getting stuck in the
following call stack. This patch helps in resolving such issues faster.

kernel: ... INFO: task XXXX:56778 blocked for more than 120 seconds.
...
	Call Trace:
	__schedule+0x2bc/0x895
	schedule+0x36/0x7c
	schedule_timeout+0x1f6/0x31f
 	? __slab_free+0x19c/0x2ba
	wait_for_completion+0x12b/0x18a
	? wake_up_q+0x80/0x73
	cm_destroy_id+0x345/0x610 [ib_cm]
	ib_destroy_cm_id+0x10/0x20 [ib_cm]
	rdma_destroy_id+0xa8/0x300 [rdma_cm]
	ucma_destroy_id+0x13e/0x190 [rdma_ucm]
	ucma_write+0xe0/0x160 [rdma_ucm]
	__vfs_write+0x3a/0x16d
	vfs_write+0xb2/0x1a1
	? syscall_trace_enter+0x1ce/0x2b8
	SyS_write+0x5c/0xd3
	do_syscall_64+0x79/0x1b9
	entry_SYSCALL_64_after_hwframe+0x16d/0x0

Signed-off-by: Manjunath Patil <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* Input: imagis - use FIELD_GET where applicable

[ Upstream commit c0ca3dbd03d66c6b9e044f48720e6ab5cef37ae5 ]

Instead of manually extracting certain bits from registers with binary
ANDs and shifts, the FIELD_GET macro can be used. With this in mind, the
*_SHIFT macros can be dropped.

Signed-off-by: Duje Mihanović <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* Input: allocate keycode for Display refresh rate toggle

[ Upstream commit cfeb98b95fff25c442f78a6f616c627bc48a26b7 ]

Newer Lenovo Yogas and Legions with 60Hz/90Hz displays send a wmi event
when Fn + R is pressed. This is intended for use to switch between the
two refresh rates.

Allocate a new KEY_REFRESH_RATE_TOGGLE keycode for it.

Signed-off-by: Gergo Koteles <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
Link: https://lore.kernel.org/r/15a5d08c84cf4d7b820de34ebbcf8ae2502fb3ca.1710065750.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* platform/x86: acer-wmi: Add support for Acer PH16-71

[ Upstream commit 20a36ec343d4c5abc2378a45ab5e7ea1ca85020a ]

Add Acer Predator PH16-71 to Acer_quirks with predator_v4
to support mode button and fan speed sensor.

Signed-off-by: SungHwan Jung <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* platform/x86: acer-wmi: Add predator_v4 module parameter

[ Upstream commit f9124f2a454a6f1edb4eae9f0646b1a61fd74dba ]

This parameter allows predator laptop users to test and use features
(mode button, platform profile, fan speed monitoring) without
adding model names to acer_quirks and compiling kernel.

Signed-off-by: SungHwan Jung <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* platform/x86: touchscreen_dmi: Add an extra entry for a variant of the Chuwi Vi8 tablet

[ Upstream commit 1266e2efb7512dbf20eac820ca2ed34de6b1c3e7 ]

Signed-off-by: Alban Boyé <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* perf/x86/amd/lbr: Discard erroneous branch entries

[ Upstream commit 29297ffffb0bf388778bd4b581a43cee6929ae65 ]

The Revision Guide for AMD Family 19h Model 10-1Fh processors declares
Erratum 1452 which states that non-branch entries may erroneously be
recorded in the Last Branch Record (LBR) stack with the valid and
spec bits set.

Such entries can be recognized by inspecting bit 61 of the corresponding
LastBranchStackToIp register. This bit is currently reserved but if found
to be set, the associated branch entry should be discarded.

Signed-off-by: Sandipan Das <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://bugzilla.kernel.org/attachment.cgi?id=305518
Link: https://lore.kernel.org/r/3ad2aa305f7396d41a40e3f054f740d464b16b7f.1706526029.git.sandipan.das@amd.com
Signed-off-by: Sasha Levin <[email protected]>

* ALSA: hda/realtek: Add quirk for Lenovo Yoga 9 14IMH9

[ Upstream commit 9b714a59b719b1ba9382c092f0f7aa4bbe94eba1 ]

The speakers on the Lenovo Yoga 9 14IMH9 are similar to previous generations
such as the 14IAP7, and the bass speakers can be fixed using similar methods
with one caveat: 14IMH9 uses CS35L41 amplifiers which need to be activated
separately.

Signed-off-by: Jichi Zhang <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* ktest: force $buildonly = 1 for 'make_warnings_file' test type

[ Upstream commit 07283c1873a4d0eaa0e822536881bfdaea853910 ]

The test type "make_warnings_file" should have no mandatory configuration
parameters other than the ones required by the "build" test type, because
its purpose is to create a file with build warnings that may or may not be
used by other subsequent tests. Currently, the only way to use it as a
stand-alone test is by setting POWER_CYCLE, CONSOLE, SSH_USER,
BUILD_TARGET, TARGET_IMAGE, REBOOT_TYPE and GRUB_MENU.

Link: https://lkml.kernel.org/r/[email protected]

Cc: John Hawley <[email protected]>
Signed-off-by: Ricardo B. Marliere <[email protected]>
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* Input: xpad - add support for Snakebyte GAMEPADs

[ Upstream commit 81c32343d04f8ca974681d5fb5d939d2e1f58851 ]

Add Snakebyte GAMEPAD BASE X and Snakebyte GAMEPAD RGB X to the list
of supported devices.

Signed-off-by: Matt Scialabba <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* ring-buffer: use READ_ONCE() to read cpu_buffer->commit_page in concurrent environment

[ Upstream commit f1e30cb6369251c03f63c564006f96a54197dcc4 ]

In function ring_buffer_iter_empty(), cpu_buffer->commit_page is read
while other threads may change it. It may cause the time_stamp that read
in the next line come from a different page. Use READ_ONCE() to avoid
having to reason about compiler optimizations now and in future.

Link: https://lore.kernel.org/linux-trace-kernel/[email protected]

Cc: Masami Hiramatsu <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Signed-off-by: linke li <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* tools: iio: replace seekdir() in iio_generic_buffer

[ Upstream commit 4e6500bfa053dc133021f9c144261b77b0ba7dc8 ]

Replace seekdir() with rewinddir() in order to fix a localized glibc bug.

One of the glibc patches that stable Gentoo is using causes an improper
directory stream positioning bug on 32bit arm. That in turn ends up as a
floating point exception in iio_generic_buffer.

The attached patch provides a fix by using an equivalent function which
should not cause trouble for other distros and is easier to reason about
in general as it obviously always goes back to to the start.

https://sourceware.org/bugzilla/show_bug.cgi?id=31212

Signed-off-by: Petre Rodan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* bus: mhi: host: Add MHI_PM_SYS_ERR_FAIL state

[ Upstream commit bce3f770684cc1d91ff9edab431b71ac991faf29 ]

When processing a SYSERR, if the device does not respond to the MHI_RESET
from the host, the host will be stuck in a difficult to recover state.
The host will remain in MHI_PM_SYS_ERR_PROCESS and not clean up the host
channels.  Clients will not be notified of the SYSERR via the destruction
of their channel devices, which means clients may think that the device is
still up.  Subsequent SYSERR events such as a device fatal error will not
be processed as the state machine cannot transition from PROCESS back to
DETECT.  The only way to recover from this is to unload the mhi module
(wipe the state machine state) or for the mhi controller to initiate
SHUTDOWN.

This issue was discovered by stress testing soc_reset events on AIC100
via the sysfs node.

soc_reset is processed entirely in hardware.  When the register write
hits the endpoint hardware, it causes the soc to reset without firmware
involvement.  In stress testing, there is a rare race where soc_reset N
will cause the soc to reset and PBL to signal SYSERR (fatal error).  If
soc_reset N+1 is triggered before PBL can process the MHI_RESET from the
host, then the soc will reset again, and re-run PBL from the beginning.
This will cause PBL to lose all state.  PBL will be waiting for the host
to respond to the new syserr, but host will be stuck expecting the
previous MHI_RESET to be processed.

Additionally, the AMSS EE firmware (QSM) was hacked to synthetically
reproduce the issue by simulating a FW hang after the QSM issued a
SYSERR.  In this case, soc_reset would not recover the device.

For this failure case, to recover the device, we need a state similar to
PROCESS, but can transition to DETECT.  There is not a viable existing
state to use.  POR has the needed transitions, but assumes the device is
in a good state and could allow the host to attempt to use the device.
Allowing PROCESS to transition to DETECT invites the possibility of
parallel SYSERR processing which could get the host and device out of
sync.

Thus, invent a new state - MHI_PM_SYS_ERR_FAIL

This essentially a holding state.  It allows us to clean up the host
elements that are based on the old state of the device (channels), but
does not allow us to directly advance back to an operational state.  It
does allow the detection and processing of another SYSERR which may
recover the device, or allows the controller to do a clean shutdown.

Signed-off-by: Jeffrey Hugo <[email protected]>
Reviewed-by: Carl Vanderlip <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* kernfs: RCU protect kernfs_nodes and avoid kernfs_idr_lock in kernfs_find_and_get_node_by_id()

[ Upstream commit 4207b556e62f0a8915afc5da4c5d5ad915a253a5 ]

The BPF helper bpf_cgroup_from_id() calls kernfs_find_and_get_node_by_id()
which acquires kernfs_idr_lock, which is an non-raw non-IRQ-safe lock. This
can lead to deadlocks as bpf_cgroup_from_id() can be called from any BPF
programs including e.g. the ones that attach to functions which are holding
the scheduler rq lock.

Consider the following BPF program:

  SEC("fentry/__set_cpus_allowed_ptr_locked")
  int BPF_PROG(__set_cpus_allowed_ptr_locked, struct task_struct *p,
	       struct affinity_context *affn_ctx, struct rq *rq, struct rq_flags *rf)
  {
	  struct cgroup *cgrp = bpf_cgroup_from_id(p->cgroups->dfl_cgrp->kn->id);

	  if (cgrp) {
		  bpf_printk("%d[%s] in %s", p->pid, p->comm, cgrp->kn->name);
		  bpf_cgroup_release(cgrp);
	  }
	  return 0;
  }

__set_cpus_allowed_ptr_locked() is called with rq lock held and the above
BPF program calls bpf_cgroup_from_id() within leading to the following
lockdep warning:

  =====================================================
  WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
  6.7.0-rc3-work-00053-g07124366a1d7-dirty #147 Not tainted
  -----------------------------------------------------
  repro/1620 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
  ffffffff833b3688 (kernfs_idr_lock){+.+.}-{2:2}, at: kernfs_find_and_get_node_by_id+0x1e/0x70

		and this task is already holding:
  ffff888237ced698 (&rq->__lock){-.-.}-{2:2}, at: task_rq_lock+0x4e/0xf0
  which would create a new lock dependency:
   (&rq->__lock){-.-.}-{2:2} -> (kernfs_idr_lock){+.+.}-{2:2}
  ...
   Possible interrupt unsafe locking scenario:

	 CPU0                    CPU1
	 ----                    ----
    lock(kernfs_idr_lock);
				 local_irq_disable();
				 lock(&rq->__lock);
				 lock(kernfs_idr_lock);
    <Interrupt>
      lock(&rq->__lock);

		 *** DEADLOCK ***
  ...
  Call Trace:
   dump_stack_lvl+0x55/0x70
   dump_stack+0x10/0x20
   __lock_acquire+0x781/0x2a40
   lock_acquire+0xbf/0x1f0
   _raw_spin_lock+0x2f/0x40
   kernfs_find_and_get_node_by_id+0x1e/0x70
   cgroup_get_from_id+0x21/0x240
   bpf_cgroup_from_id+0xe/0x20
   bpf_prog_98652316e9337a5a___set_cpus_allowed_ptr_locked+0x96/0x11a
   bpf_trampoline_6442545632+0x4f/0x1000
   __set_cpus_allowed_ptr_locked+0x5/0x5a0
   sched_setaffinity+0x1b3/0x290
   __x64_sys_sched_setaffinity+0x4f/0x60
   do_syscall_64+0x40/0xe0
   entry_SYSCALL_64_after_hwframe+0x46/0x4e

Let's fix it by protecting kernfs_node and kernfs_root with RCU and making
kernfs_find_and_get_node_by_id() acquire rcu_read_lock() instead of
kernfs_idr_lock.

This adds an rcu_head to kernfs_node making it larger by 16 bytes on 64bit.
Combined with the preceding rearrange patch, the net increase is 8 bytes.

Signed-off-by: Tejun Heo <[email protected]>
Cc: Andrea Righi <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* usb: typec: ucsi: Add qcm6490-pmic-glink as needing PDOS quirk

[ Upstream commit 88bae831f3810e02c9c951233c7ee662aa13dc2c ]

The QCM6490 Linux Android firmware needs this workaround as well. Add it
to the list.

Acked-by: Heikki Krogerus <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* thunderbolt: Calculate DisplayPort tunnel bandwidth after DPRX capabilities read

[ Upstream commit ccd845021147dc8257a05ed8f5a7f9c61a9101e3 ]

According to USB4 Connection Manager guide, after DisplayPort tunnel was
setup, the DPRX capabilities read is performed by the DPTX. According to
VESA spec, this shall be completed within 5 seconds after the DisplayPort
tunnel was setup. Hence, if the bit: DPRX Capabilities Read Done, was
not set to '1' by this time, we timeout and fail calculating DisplayPort
tunnel consumed bandwidth.

Signed-off-by: Gil Fine <[email protected]>
Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* usb: gadget: uvc: refactor the check for a valid buffer in the pump worker

[ Upstream commit 5e7ea65daf13a95a6cc63d1377e4c500e4e1340f ]

By toggling the condition check for a valid buffer, the else path
can be completely avoided.

Signed-off-by: Michael Grzeschik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* usb: gadget: uvc: mark incomplete frames with UVC_STREAM_ERR

[ Upstream commit 2a3b7af120477d0571b815ccb8600cafd5ebf02f ]

If an frame was transmitted incomplete to the host, we set the
UVC_STREAM_ERR bit in the header for the last request that is going
to be queued. This way the host will know that it should drop the
frame instead of trying to display the corrupted content.

Signed-off-by: Michael Grzeschik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* usb: typec: ucsi: Limit read size on v1.2

[ Upstream commit b3db266fb031fba88c423d4bb8983a73a3db6527 ]

Between UCSI 1.2 and UCSI 2.0, the size of the MESSAGE_IN region was
increased from 16 to 256. In order to avoid overflowing reads for older
systems, add a mechanism to use the read UCSI version to truncate read
sizes on UCSI v1.2.

Tested-by: Neil Armstrong <[email protected]>
Reviewed-by: Prashant Malani <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Abhishek Pandit-Subedi <[email protected]>
Link: https://lore.kernel.org/r/20240209143723.v5.1.Iacf5570a66b82b73ef03daa6557e2fc0db10266a@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* serial: 8250_of: Drop quirk fot NPCM from 8250_port

[ Upstream commit cd0eb354d441488feed6685adbeb1acd45db1b8d ]

We are not supposed to spread quirks in 8250_port module especially
when we have a separate driver for the hardware in question.

Move quirk from generic module to the driver that uses it.

Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* thunderbolt: Keep the domain powered when USB4 port is in redrive mode

[ Upstream commit a75e0684efe567ae5f6a8e91a8360c4c1773cf3a ]

If a DiplayPort cable is directly connected to the host routers USB4
port, there is no tunnel involved but the port is in "redrive" mode
meaning that it is re-driving the DisplayPort signals from its
DisplayPort source. In this case we need to keep the domain powered on
otherwise once the domain enters D3cold the connected monitor blanks
too.

Since this happens only on Intel Barlow Ridge add a quirk that takes
runtime PM reference if we detect that the USB4 port entered redrive
mode (and release it once it exits the mode).

Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* usb: typec: tcpci: add generic tcpci fallback compatible

[ Upstream commit 8774ea7a553e2aec323170d49365b59af0a2b7e0 ]

The driver already support the tcpci binding for the i2c_device_id so
add the support for the of_device_id too.

Signed-off-by: Marco Felsch <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined

[ Upstream commit 12f371e2b6cb4b79c788f1f073992e115f4ca918 ]

Function checkdone is only required if QUIRK2 is defined, so add
appropriate #if / #endif around the function.

Cleans up clang scan build warning:
drivers/usb/host/sl811-hcd.c:588:18: warning: unused function
'checkdone' [-Wunused-function]

Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* ASoC: amd: yc: Fix non-functional mic on ASUS M7600RE

[ Upstream commit db185362fca554b201e2c62beb15a02bb39a064b ]

The ASUS M7600RE (Vivobook Pro 16X OLED) needs a quirks-table entry for the
internal microphone to function properly.

Signed-off-by: Mitch Cooley <[email protected]>

Link: https://msgid.link/r/CALijGznExWW4fujNWwMzmn_K=wo96sGzV_2VkT7NjvEUdkg7Gw@mail.gmail.com
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* thermal/of: Assume polling-delay(-passive) 0 when absent

[ Upstream commit 488164006a281986d95abbc4b26e340c19c4c85b ]

Currently, thermal zones associated with providers that have interrupts
for signaling hot/critical trips are required to set a polling-delay
of 0 to indicate no polling. This feels a bit backwards.

Change the code such that "no polling delay" also means "no polling".

Suggested-by: Bjorn Andersson <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>

* ASoC: soc-core.c: Skip dummy codec when adding platforms

[ Upstream commit 23fb6bc2696119391ec3a92ccaffe50e567c515e ]

When pcm_runtime is adding platform components it will scan all
registered components. In case of DPCM FE/BE some DAI links will
configure dummy platform. However both dummy codec and dummy platform
are using "snd-soc-dummy" as component->name. Dummy codec should be
skipped when adding platforms otherwise there'll be overflow and UBSAN
complains.

Reported-by: Zhipeng Wang <[email protected]>
Signed-off-by: Chancel Liu <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* x86/xen: attempt to inflate the memory balloon on PVH

[ Upstream commit 38620fc4e8934f1801c7811ef39a041914ac4c1d ]

When running as PVH or HVM Linux will use holes in the memory map as scratch
space to map grants, foreign domain pages and possibly miscellaneous other
stuff.  However the usage of such memory map holes for Xen purposes can be
problematic.  The request of holesby Xen happen quite early in the kernel boot
process (grant table setup already uses scratch map space), and it's possible
that by then not all devices have reclaimed their MMIO space.  It's not
unlikely for chunks of Xen scratch map space to end up using PCI bridge MMIO
window memory, which (as expected) causes quite a lot of issues in the system.

At least for PVH dom0 we have the possibility of using regions marked as
UNUSABLE in the e820 memory map.  Either if the region is UNUSABLE in the
native memory map, or it has been converted into UNUSABLE in order to hide RAM
regions from dom0, the second stage translation page-tables can populate those
areas without issues.

PV already has this kind of logic, where the balloon driver is inflated at
boot.  Re-use the current logic in order to also inflate it when running as
PVH.  onvert UNUSABLE regions up to the ratio specified in EXTRA_MEM_RATIO to
RAM, while reserving them using xen_add_extra_mem() (which is also moved so
it's no longer tied to CONFIG_PV).

[jgross: fixed build for CONFIG_PVH without CONFIG_XEN_PVH]

Signed-off-by: Roger Pau Monné <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* fbdev: viafb: fix typo in hw_bitblt_1 and hw_bitblt_2

[ Upstream commit bc87bb342f106a0402186bcb588fcbe945dced4b ]

There are some actions with value 'tmp' but 'dst_addr' is checked instead.
It is obvious that a copy-paste error was made here and the value
of variable 'tmp' should be checked here.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Aleksandr Burakov <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* io_uring: clear opcode specific data for an early failure

[ Upstream commit e21e1c45e1fe2e31732f40256b49c04e76a17cee ]

If failure happens before the opcode prep handler is called, ensure that
we clear the opcode specific area of the request, which holds data
specific to that request type. This prevents errors where opcode
handlers either don't get to clear per-request private data since prep
isn't even called.

Reported-and-tested-by: [email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* modpost: fix null pointer dereference

[ Upstream commit 23dfd914d2bfc4c9938b0084dffd7105de231d98 ]

If the find_fromsym() call fails and returns NULL, the warn() call
will dereference this NULL pointer and cause the program to crash.

This happened when I tried to build with "test_user_copy" module.
With this fix, it prints lots of warnings like this:

 WARNING: modpost: lib/test_user_copy: section mismatch in reference: (unknown)+0x4 (section: .text.fixup) -> (unknown) (section: .init.text)

[email protected]:
 The issue is reproduced with ARCH=arm allnoconfig + CONFIG_MODULES=y +
 CONFIG_RUNTIME_TESTING_MENU=y + CONFIG_TEST_USER_COPY=m

Signed-off-by: Max Kellermann <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* drivers/nvme: Add quirks for device 126f:2262

[ Upstream commit e89086c43f0500bc7c4ce225495b73b8ce234c1f ]

This commit adds NVME_QUIRK_NO_DEEPEST_PS and NVME_QUIRK_BOGUS_NID for
device [126f:2262], which appears to be a generic VID:PID pair used for
many SSDs based on the Silicon Motion SM2262/SM2262EN controller.

Two of my SSDs with this VID:PID pair exhibit the same behavior:

  * They frequently have trouble exiting the deepest power state (5),
    resulting in the entire disk unresponsive.
    Verified by setting nvme_core.default_ps_max_latency_us=10000 and
    observing them behaving normally.
  * They produce all-zero nguid and eui64 with `nvme id-ns` command.

The offending products are:

  * HP SSD EX950 1TB
  * HIKVISION C2000Pro 2TB

Signed-off-by: Jiawei Fu <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* fbmon: prevent division by zero in fb_videomode_from_videomode()

[ Upstream commit c2d953276b8b27459baed1277a4fdd5dd9bd4126 ]

The expression htotal * vtotal can have a zero value on
overflow. It is necessary to prevent division by zero like in
fb_var_to_videomode().

Found by Linux Verification Center (linuxtesting.org) with Svace.

Signed-off-by: Roman Smirnov <[email protected]>
Reviewed-by: Sergey Shtylyov <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* ALSA: hda/realtek: Add quirks for some Clevo laptops

[ Upstream commit 33affa7fb46c0c07f6c49d4ddac9dd436715064c ]

Add audio quirks to fix speaker output and headset detection on some new
Clevo models:

- L240TU (ALC245)
- PE60SNE-G (ALC1220)
- V350SNEQ (ALC245)

Co-authored-by: Jeremy Soller <[email protected]>
Signed-off-by: Tim Crawford <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* drm/amdgpu: Init zone device and drm client after mode-1 reset on reload

[ Upstream commit f679fd6057fbf5ab34aaee28d58b7f81af0cbf48 ]

In passthrough environment, when amdgpu is reloaded after unload, mode-1
is triggered after initializing the necessary IPs, That init does not
include KFD, and KFD init waits until the reset is completed. KFD init
is called in the reset handler, but in this case, the zone device and
drm client is not initialized, causing app to create kernel panic.

v2: Removing the init KFD condition from amdgpu_amdkfd_drm_client_create.
As the previous version has the potential of creating DRM client twice.

v3: v2 patch results in SDMA engine hung as DRM open causes VM clear to SDMA
before SDMA init. Adding the condition to in drm client creation, on top of v1,
to guard against drm client creation call multiple times.

Signed-off-by: Ahmad Rehman <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* gcc-plugins/stackleak: Avoid .head.text section

commit e7d24c0aa8e678f41457d1304e2091cac6fd1a2e upstream.

The .head.text section carries the startup code that runs with the MMU
off or with a translation of memory that deviates from the ordinary one.
So avoid instrumentation with the stackleak plugin, which already avoids
.init.text and .noinstr.text entirely.

Fixes: 48204aba801f1b51 ("x86/sme: Move early SME kernel encryption handling into .head.text")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-lkp/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

* media: mediatek: vcodec: Fix oops when HEVC init fails

[ Upstream commit 97c75ee5de060d271d80109b0c47cb6008439e5b ]

The stateless HEVC decoder saves the instance pointer in the context
regardless if the initialization worked or not. This caused a use after
free, when the pointer is freed in case of a failure in the deinit
function.
Only store the instance pointer when the initialization was successful,
to solve this issue.

 Hardware name: Acer Tomato (rev3 - 4) board (DT)
 pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec]
 lr : vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec]
 sp : ffff80008750bc20
 x29: ffff80008750bc20 x28: ffff1299f6d70000 x27: 0000000000000000
 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
 x23: ffff80008750bc98 x22: 000000000000a003 x21: ffffd45c4cfae000
 x20: 0000000000000010 x19: ffff1299fd668310 x18: 000000000000001a
 x17: 000000040044ffff x16: ffffd45cb15dc648 x15: 0000000000000000
 x14: ffff1299c08da1c0 x13: ffffd45cb1f87a10 x12: ffffd45cb2f5fe80
 x11: 0000000000000001 x10: 0000000000001b30 x9 : ffffd45c4d12b488
 x8 : 1fffe25339380d81 x7 : 0000000000000001 x6 : ffff1299c9c06c00
 x5 : 0000000000000132 x4 : 0000000000000000 x3 : 0000000000000000
 x2 : 0000000000000010 x1 : ffff80008750bc98 x0 : 0000000000000000
 Call trace:
  vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec]
  vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec]
  vpu_dec_deinit+0x1c/0x30 [mtk_vcodec_dec]
  vdec_hevc_slice_deinit+0x30/0x98 [mtk_vcodec_dec]
  vdec_if_deinit+0x38/0x68 [mtk_vcodec_dec]
  mtk_vcodec_dec_release+0x20/0x40 [mtk_vcodec_dec]
  fops_vcodec_release+0x64/0x118 [mtk_vcodec_dec]
  v4l2_release+0x7c/0x100
  __fput+0x80/0x2d8
  __fput_sync+0x58/0x70
  __arm64_sys_close+0x40/0x90
  invoke_syscall+0x50/0x128
  el0_svc_common.constprop.0+0x48/0xf0
  do_el0_svc+0x24/0x38
  el0_svc+0x38/0xd8
  el0t_64_sync_handler+0xc0/0xc8
  el0t_64_sync+0x1a8/0x1b0
 Code: d503201f f9401660 b900127f b900227f (f9400400)

Signed-off-by: Nicolas Dufresne <[email protected]>
Fixes: 2674486aac7d ("media: mediatek: vcodec: support stateless hevc decoder")
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Sebastian Fricke <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

* media: mediatek: vcodec: adding lock to protect decoder context list

[ Upstream commit 6467cda18c9f9b5f2f9a0aa1e2861c653e41f382 ]

Add a lock for the ctx_list, to avoid accessing a NULL pointer
within the 'vpu_dec_ipi_handler' function when the ctx_list has
been deleted due to an unexpected behavior on the SCP IP block.

Hardware name: Google juniper sku16 board (DT)
pstate: 20400005 (nzCv daif +PAN -UAO -TCO BTYPE=--)
pc : vpu_dec_ipi_handler+0x58/0x1f8 [mtk_vcodec_dec]
lr : scp_ipi_handler+0xd0/0x194 [mtk_scp]
sp : ffffffc0131dbbd0
x29: ffffffc0131dbbd0 x28: 0000000000000000
x27: ffffff9bb277f348 x26: ffffff9bb242ad00
x25: ffffffd2d440d3b8 x24: ffffffd2a13ff1d4
x23: ffffff9bb7fe85a0 x22: ffffffc0133fbdb0
x21: 0000000000000010 x20: ffffff9b050ea328
x19: ffffffc0131dbc08 x18: 0000000000001000
x17: 0000000000000000 x16: ffffffd2d461c6e0
x15: 0000000000000242 x14: 000000000000018f
x13: 000000000000004d x12: 0000000000000000
x11: 0000000000000001 x10: fffffffffffffff0
x9 : ffffff9bb6e793a8 x8 : 0000000000000000
x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : fffffffffffffff0
x3 : 0000000000000020 x2 : ffffff9bb6e79080
x1 : 0000000000000010 x0 : ffffffc0131dbc08
Call trace:
vpu_dec_ipi_handler+0x58/0x1f8 [mtk_vcodec_dec (HASH:6c3f 2)]
scp_ipi_handler+0xd0/0x194 [mtk_scp (HASH:7046 3)]
mt8183_scp_irq_handler+0x44/0x88 [mtk_scp (HASH:7046 3)]
scp_irq_handler+0x48/0x90 [mtk_scp (HASH:7046 3)]
irq_thread_fn+0x38/0x94
irq_thread+0x100/0x1c0
kthread+0x140/0x1fc
ret_from_fork+0x10/0x30
Code: 54000088 f94ca50a eb14015f 54000060 (f9400108)
---[ end trace ace43ce36cbd5c93 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: 0x12c4000000 from 0xffffffc010000000
PHYS_OFFSET: 0xffffffe580000000
CPU features: 0x08240002,2188200c
Memory Limit: none

Fixes: 655b86e52eac ("media: mediatek: vcodec: Fix possible invalid memory access for decoder")
Signed-off-by: Yunfei Dong <[email protected]>
Reviewed-by: Nicolas Dufresne <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <ang…
Avenger-285714 pushed a commit that referenced this pull request May 5, 2024
tun: limit printing rate when illegal packet received by tun dev
56d5997 
[ Upstream commit f8bbc07 ]

vhost_worker will call tun call backs to receive packets. If too many
illegal packets arrives, tun_do_read will keep dumping packet contents.
When console is enabled, it will costs much more cpu time to dump
packet and soft lockup will be detected.

net_ratelimit mechanism can be used to limit the dumping rate.

PID: 33036    TASK: ffff949da6f20000  CPU: 23   COMMAND: "vhost-32980"
 #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253
 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3
 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e
 #3 [fffffe00003fced0] do_nmi at ffffffff8922660d
 #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663
    [exception RIP: io_serial_in+20]
    RIP: ffffffff89792594  RSP: ffffa655314979e8  RFLAGS: 00000002
    RAX: ffffffff89792500  RBX: ffffffff8af428a0  RCX: 0000000000000000
    RDX: 00000000000003fd  RSI: 0000000000000005  RDI: ffffffff8af428a0
    RBP: 0000000000002710   R8: 0000000000000004   R9: 000000000000000f
    R10: 0000000000000000  R11: ffffffff8acbf64f  R12: 0000000000000020
    R13: ffffffff8acbf698  R14: 0000000000000058  R15: 0000000000000000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594
 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470
 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6
 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605
 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558
 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124
 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07
 #12 [ffffa65531497b68] printk at ffffffff89318306
 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765
 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun]
 #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun]
 #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net]
 #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost]
 #18 [ffffa65531497f10] kthread at ffffffff892d2e72
 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f

Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors")
Signed-off-by: Lei Chen <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Acked-by: Jason Wang <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Jun 10, 2025
@idosch @opsiff
vxlan: Annotate FDB data races
77dc88d 
[ Upstream commit f6205f8 ]

The 'used' and 'updated' fields in the FDB entry structure can be
accessed concurrently by multiple threads, leading to reports such as
[1]. Can be reproduced using [2].

Suppress these reports by annotating these accesses using
READ_ONCE() / WRITE_ONCE().

[1]
BUG: KCSAN: data-race in vxlan_xmit / vxlan_xmit

write to 0xffff942604d263a8 of 8 bytes by task 286 on cpu 0:
 vxlan_xmit+0xb29/0x2380
 dev_hard_start_xmit+0x84/0x2f0
 __dev_queue_xmit+0x45a/0x1650
 packet_xmit+0x100/0x150
 packet_sendmsg+0x2114/0x2ac0
 __sys_sendto+0x318/0x330
 __x64_sys_sendto+0x76/0x90
 x64_sys_call+0x14e8/0x1c00
 do_syscall_64+0x9e/0x1a0
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

read to 0xffff942604d263a8 of 8 bytes by task 287 on cpu 2:
 vxlan_xmit+0xadf/0x2380
 dev_hard_start_xmit+0x84/0x2f0
 __dev_queue_xmit+0x45a/0x1650
 packet_xmit+0x100/0x150
 packet_sendmsg+0x2114/0x2ac0
 __sys_sendto+0x318/0x330
 __x64_sys_sendto+0x76/0x90
 x64_sys_call+0x14e8/0x1c00
 do_syscall_64+0x9e/0x1a0
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

value changed: 0x00000000fffbac6e -> 0x00000000fffbac6f

Reported by Kernel Concurrency Sanitizer on:
CPU: 2 UID: 0 PID: 287 Comm: mausezahn Not tainted 6.13.0-rc7-01544-gb4b270f11a02 deepin-community#5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014

[2]
 #!/bin/bash

 set +H
 echo whitelist > /sys/kernel/debug/kcsan
 echo !vxlan_xmit > /sys/kernel/debug/kcsan

 ip link add name vx0 up type vxlan id 10010 dstport 4789 local 192.0.2.1
 bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 198.51.100.1
 taskset -c 0 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q &
 taskset -c 2 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q &

Reviewed-by: Petr Machata <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: Nikolay Aleksandrov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
(cherry picked from commit 13cba3f837903f7184d6e9b6137d5165ffe82a8f)
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Jun 10, 2025
@idosch @opsiff
vxlan: Annotate FDB data races
7b0583d 
[ Upstream commit f6205f8 ]

The 'used' and 'updated' fields in the FDB entry structure can be
accessed concurrently by multiple threads, leading to reports such as
[1]. Can be reproduced using [2].

Suppress these reports by annotating these accesses using
READ_ONCE() / WRITE_ONCE().

[1]
BUG: KCSAN: data-race in vxlan_xmit / vxlan_xmit

write to 0xffff942604d263a8 of 8 bytes by task 286 on cpu 0:
 vxlan_xmit+0xb29/0x2380
 dev_hard_start_xmit+0x84/0x2f0
 __dev_queue_xmit+0x45a/0x1650
 packet_xmit+0x100/0x150
 packet_sendmsg+0x2114/0x2ac0
 __sys_sendto+0x318/0x330
 __x64_sys_sendto+0x76/0x90
 x64_sys_call+0x14e8/0x1c00
 do_syscall_64+0x9e/0x1a0
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

read to 0xffff942604d263a8 of 8 bytes by task 287 on cpu 2:
 vxlan_xmit+0xadf/0x2380
 dev_hard_start_xmit+0x84/0x2f0
 __dev_queue_xmit+0x45a/0x1650
 packet_xmit+0x100/0x150
 packet_sendmsg+0x2114/0x2ac0
 __sys_sendto+0x318/0x330
 __x64_sys_sendto+0x76/0x90
 x64_sys_call+0x14e8/0x1c00
 do_syscall_64+0x9e/0x1a0
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

value changed: 0x00000000fffbac6e -> 0x00000000fffbac6f

Reported by Kernel Concurrency Sanitizer on:
CPU: 2 UID: 0 PID: 287 Comm: mausezahn Not tainted 6.13.0-rc7-01544-gb4b270f11a02 deepin-community#5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014

[2]
 #!/bin/bash

 set +H
 echo whitelist > /sys/kernel/debug/kcsan
 echo !vxlan_xmit > /sys/kernel/debug/kcsan

 ip link add name vx0 up type vxlan id 10010 dstport 4789 local 192.0.2.1
 bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 198.51.100.1
 taskset -c 0 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q &
 taskset -c 2 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 0 -q &

Reviewed-by: Petr Machata <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: Nikolay Aleksandrov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
(cherry picked from commit 13cba3f837903f7184d6e9b6137d5165ffe82a8f)
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Jun 20, 2025
@viktormalik @opsiff
libbpf: Fix buffer overflow in bpf_object__init_prog
60cf53d 
[ Upstream commit ee684de5c1b0ac01821320826baec7da93f3615b ]

As shown in [1], it is possible to corrupt a BPF ELF file such that
arbitrary BPF instructions are loaded by libbpf. This can be done by
setting a symbol (BPF program) section offset to a large (unsigned)
number such that <section start + symbol offset> overflows and points
before the section data in the memory.

Consider the situation below where:
- prog_start = sec_start + symbol_offset    <-- size_t overflow here
- prog_end   = prog_start + prog_size

    prog_start        sec_start        prog_end        sec_end
        |                |                 |              |
        v                v                 v              v
    .....................|################################|............

The report in [1] also provides a corrupted BPF ELF which can be used as
a reproducer:

    $ readelf -S crash
    Section Headers:
      [Nr] Name              Type             Address           Offset
           Size              EntSize          Flags  Link  Info  Align
    ...
      [ 2] uretprobe.mu[...] PROGBITS         0000000000000000  00000040
           0000000000000068  0000000000000000  AX       0     0     8

    $ readelf -s crash
    Symbol table '.symtab' contains 8 entries:
       Num:    Value          Size Type    Bind   Vis      Ndx Name
    ...
         6: ffffffffffffffb8   104 FUNC    GLOBAL DEFAULT    2 handle_tp

Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will
point before the actual memory where section 2 is allocated.

This is also reported by AddressSanitizer:

    =================================================================
    ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490
    READ of size 104 at 0x7c7302fe0000 thread T0
        #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76)
        #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856
        #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928
        #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930
        #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067
        deepin-community#5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090
        deepin-community#6 0x000000400c16 in main /poc/poc.c:8
        deepin-community#7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4)
        deepin-community#8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667)
        deepin-community#9 0x000000400b34 in _start (/poc/poc+0x400b34)

    0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8)
    allocated by thread T0 here:
        #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b)
        #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600)
        #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018)
        #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740

The problem here is that currently, libbpf only checks that the program
end is within the section bounds. There used to be a check
`while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was
removed by commit 6245947 ("libbpf: Allow gaps in BPF program
sections to support overriden weak functions").

Add a check for detecting the overflow of `sec_off + prog_sz` to
bpf_object__init_prog to fix this issue.

[1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md

Fixes: 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")
Reported-by: lmarch2 <[email protected]>
Signed-off-by: Viktor Malik <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Shung-Hsi Yu <[email protected]>
Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
(cherry picked from commit 18eb7b5f1e51fd2e03d1866a78c209b585f40254)
opsiff pushed a commit that referenced this pull request Jun 23, 2025
@viktormalik @opsiff
libbpf: Fix buffer overflow in bpf_object__init_prog
a95cab0 
[ Upstream commit ee684de5c1b0ac01821320826baec7da93f3615b ]

As shown in [1], it is possible to corrupt a BPF ELF file such that
arbitrary BPF instructions are loaded by libbpf. This can be done by
setting a symbol (BPF program) section offset to a large (unsigned)
number such that <section start + symbol offset> overflows and points
before the section data in the memory.

Consider the situation below where:
- prog_start = sec_start + symbol_offset    <-- size_t overflow here
- prog_end   = prog_start + prog_size

    prog_start        sec_start        prog_end        sec_end
        |                |                 |              |
        v                v                 v              v
    .....................|################################|............

The report in [1] also provides a corrupted BPF ELF which can be used as
a reproducer:

    $ readelf -S crash
    Section Headers:
      [Nr] Name              Type             Address           Offset
           Size              EntSize          Flags  Link  Info  Align
    ...
      [ 2] uretprobe.mu[...] PROGBITS         0000000000000000  00000040
           0000000000000068  0000000000000000  AX       0     0     8

    $ readelf -s crash
    Symbol table '.symtab' contains 8 entries:
       Num:    Value          Size Type    Bind   Vis      Ndx Name
    ...
         6: ffffffffffffffb8   104 FUNC    GLOBAL DEFAULT    2 handle_tp

Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will
point before the actual memory where section 2 is allocated.

This is also reported by AddressSanitizer:

    =================================================================
    ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490
    READ of size 104 at 0x7c7302fe0000 thread T0
        #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76)
        #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856
        #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928
        #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930
        #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067
        #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090
        #6 0x000000400c16 in main /poc/poc.c:8
        #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4)
        #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667)
        #9 0x000000400b34 in _start (/poc/poc+0x400b34)

    0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8)
    allocated by thread T0 here:
        #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b)
        #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600)
        #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018)
        #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740

The problem here is that currently, libbpf only checks that the program
end is within the section bounds. There used to be a check
`while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was
removed by commit 6245947 ("libbpf: Allow gaps in BPF program
sections to support overriden weak functions").

Add a check for detecting the overflow of `sec_off + prog_sz` to
bpf_object__init_prog to fix this issue.

[1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md

Fixes: 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")
Reported-by: lmarch2 <[email protected]>
Signed-off-by: Viktor Malik <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Reviewed-by: Shung-Hsi Yu <[email protected]>
Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
(cherry picked from commit 9d57de88d940b23ddb93b7f6ae670fb3369455ae)
opsiff pushed a commit that referenced this pull request Jun 23, 2025
@rostedt @opsiff
ring-buffer: Move cpus_read_lock() outside of buffer->mutex
ef9534a 
commit c98cc9797b7009308fff73d41bc1d08642dab77a upstream.

Running a modified trace-cmd record --nosplice where it does a mmap of the
ring buffer when '--nosplice' is set, caused the following lockdep splat:

 ======================================================
 WARNING: possible circular locking dependency detected
 6.15.0-rc7-test-00002-gfb7d03d8a82f #551 Not tainted
 ------------------------------------------------------
 trace-cmd/1113 is trying to acquire lock:
 ffff888100062888 (&buffer->mutex){+.+.}-{4:4}, at: ring_buffer_map+0x11c/0xe70

 but task is already holding lock:
 ffff888100a5f9f8 (&cpu_buffer->mapping_lock){+.+.}-{4:4}, at: ring_buffer_map+0xcf/0xe70

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #5 (&cpu_buffer->mapping_lock){+.+.}-{4:4}:
        __mutex_lock+0x192/0x18c0
        ring_buffer_map+0xcf/0xe70
        tracing_buffers_mmap+0x1c4/0x3b0
        __mmap_region+0xd8d/0x1f70
        do_mmap+0x9d7/0x1010
        vm_mmap_pgoff+0x20b/0x390
        ksys_mmap_pgoff+0x2e9/0x440
        do_syscall_64+0x79/0x1c0
        entry_SYSCALL_64_after_hwframe+0x76/0x7e

 -> #4 (&mm->mmap_lock){++++}-{4:4}:
        __might_fault+0xa5/0x110
        _copy_to_user+0x22/0x80
        _perf_ioctl+0x61b/0x1b70
        perf_ioctl+0x62/0x90
        __x64_sys_ioctl+0x134/0x190
        do_syscall_64+0x79/0x1c0
        entry_SYSCALL_64_after_hwframe+0x76/0x7e

 -> #3 (&cpuctx_mutex){+.+.}-{4:4}:
        __mutex_lock+0x192/0x18c0
        perf_event_init_cpu+0x325/0x7c0
        perf_event_init+0x52a/0x5b0
        start_kernel+0x263/0x3e0
        x86_64_start_reservations+0x24/0x30
        x86_64_start_kernel+0x95/0xa0
        common_startup_64+0x13e/0x141

 -> #2 (pmus_lock){+.+.}-{4:4}:
        __mutex_lock+0x192/0x18c0
        perf_event_init_cpu+0xb7/0x7c0
        cpuhp_invoke_callback+0x2c0/0x1030
        __cpuhp_invoke_callback_range+0xbf/0x1f0
        _cpu_up+0x2e7/0x690
        cpu_up+0x117/0x170
        cpuhp_bringup_mask+0xd5/0x120
        bringup_nonboot_cpus+0x13d/0x170
        smp_init+0x2b/0xf0
        kernel_init_freeable+0x441/0x6d0
        kernel_init+0x1e/0x160
        ret_from_fork+0x34/0x70
        ret_from_fork_asm+0x1a/0x30

 -> #1 (cpu_hotplug_lock){++++}-{0:0}:
        cpus_read_lock+0x2a/0xd0
        ring_buffer_resize+0x610/0x14e0
        __tracing_resize_ring_buffer.part.0+0x42/0x120
        tracing_set_tracer+0x7bd/0xa80
        tracing_set_trace_write+0x132/0x1e0
        vfs_write+0x21c/0xe80
        ksys_write+0xf9/0x1c0
        do_syscall_64+0x79/0x1c0
        entry_SYSCALL_64_after_hwframe+0x76/0x7e

 -> #0 (&buffer->mutex){+.+.}-{4:4}:
        __lock_acquire+0x1405/0x2210
        lock_acquire+0x174/0x310
        __mutex_lock+0x192/0x18c0
        ring_buffer_map+0x11c/0xe70
        tracing_buffers_mmap+0x1c4/0x3b0
        __mmap_region+0xd8d/0x1f70
        do_mmap+0x9d7/0x1010
        vm_mmap_pgoff+0x20b/0x390
        ksys_mmap_pgoff+0x2e9/0x440
        do_syscall_64+0x79/0x1c0
        entry_SYSCALL_64_after_hwframe+0x76/0x7e

 other info that might help us debug this:

 Chain exists of:
   &buffer->mutex --> &mm->mmap_lock --> &cpu_buffer->mapping_lock

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&cpu_buffer->mapping_lock);
                                lock(&mm->mmap_lock);
                                lock(&cpu_buffer->mapping_lock);
   lock(&buffer->mutex);

  *** DEADLOCK ***

 2 locks held by trace-cmd/1113:
  #0: ffff888106b847e0 (&mm->mmap_lock){++++}-{4:4}, at: vm_mmap_pgoff+0x192/0x390
  #1: ffff888100a5f9f8 (&cpu_buffer->mapping_lock){+.+.}-{4:4}, at: ring_buffer_map+0xcf/0xe70

 stack backtrace:
 CPU: 5 UID: 0 PID: 1113 Comm: trace-cmd Not tainted 6.15.0-rc7-test-00002-gfb7d03d8a82f #551 PREEMPT
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
 Call Trace:
  <TASK>
  dump_stack_lvl+0x6e/0xa0
  print_circular_bug.cold+0x178/0x1be
  check_noncircular+0x146/0x160
  __lock_acquire+0x1405/0x2210
  lock_acquire+0x174/0x310
  ? ring_buffer_map+0x11c/0xe70
  ? ring_buffer_map+0x11c/0xe70
  ? __mutex_lock+0x169/0x18c0
  __mutex_lock+0x192/0x18c0
  ? ring_buffer_map+0x11c/0xe70
  ? ring_buffer_map+0x11c/0xe70
  ? function_trace_call+0x296/0x370
  ? __pfx___mutex_lock+0x10/0x10
  ? __pfx_function_trace_call+0x10/0x10
  ? __pfx___mutex_lock+0x10/0x10
  ? _raw_spin_unlock+0x2d/0x50
  ? ring_buffer_map+0x11c/0xe70
  ? ring_buffer_map+0x11c/0xe70
  ? __mutex_lock+0x5/0x18c0
  ring_buffer_map+0x11c/0xe70
  ? do_raw_spin_lock+0x12d/0x270
  ? find_held_lock+0x2b/0x80
  ? _raw_spin_unlock+0x2d/0x50
  ? rcu_is_watching+0x15/0xb0
  ? _raw_spin_unlock+0x2d/0x50
  ? trace_preempt_on+0xd0/0x110
  tracing_buffers_mmap+0x1c4/0x3b0
  __mmap_region+0xd8d/0x1f70
  ? ring_buffer_lock_reserve+0x99/0xff0
  ? __pfx___mmap_region+0x10/0x10
  ? ring_buffer_lock_reserve+0x99/0xff0
  ? __pfx_ring_buffer_lock_reserve+0x10/0x10
  ? __pfx_ring_buffer_lock_reserve+0x10/0x10
  ? bpf_lsm_mmap_addr+0x4/0x10
  ? security_mmap_addr+0x46/0xd0
  ? lock_is_held_type+0xd9/0x130
  do_mmap+0x9d7/0x1010
  ? 0xffffffffc0370095
  ? __pfx_do_mmap+0x10/0x10
  vm_mmap_pgoff+0x20b/0x390
  ? __pfx_vm_mmap_pgoff+0x10/0x10
  ? 0xffffffffc0370095
  ksys_mmap_pgoff+0x2e9/0x440
  do_syscall_64+0x79/0x1c0
  entry_SYSCALL_64_after_hwframe+0x76/0x7e
 RIP: 0033:0x7fb0963a7de2
 Code: 00 00 00 0f 1f 44 00 00 41 f7 c1 ff 0f 00 00 75 27 55 89 cd 53 48 89 fb 48 85 ff 74 3b 41 89 ea 48 89 df b8 09 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 5b 5d c3 0f 1f 00 48 8b 05 e1 9f 0d 00 64
 RSP: 002b:00007ffdcc8fb878 EFLAGS: 00000246 ORIG_RAX: 0000000000000009
 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb0963a7de2
 RDX: 0000000000000001 RSI: 0000000000001000 RDI: 0000000000000000
 RBP: 0000000000000001 R08: 0000000000000006 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000
 R13: 00007ffdcc8fbe68 R14: 00007fb096628000 R15: 00005633e01a5c90
  </TASK>

The issue is that cpus_read_lock() is taken within buffer->mutex. The
memory mapped pages are taken with the mmap_lock held. The buffer->mutex
is taken within the cpu_buffer->mapping_lock. There's quite a chain with
all these locks, where the deadlock can be fixed by moving the
cpus_read_lock() outside the taking of the buffer->mutex.

Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Vincent Donnefort <[email protected]>
Link: https://lore.kernel.org/[email protected]
Fixes: 117c392 ("ring-buffer: Introducing ring-buffer mapping functions")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
(cherry picked from commit 2d6a6cfe969f246c616b0b0f65253060838d58a8)
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Jul 2, 2025
@tamird @opsiff
ACPICA: Apply pack(1) to union aml_resource
6d25b6a 
[ Upstream commit eedf3e3c2f2af55dca42b0ea81dffb808211d269 ]

ACPICA commit 1c28da2242783579d59767617121035dafba18c3

This was originally done in NetBSD:
NetBSD/src@b69d1ac
and is the correct alternative to the smattering of `memcpy`s I
previously contributed to this repository.

This also sidesteps the newly strict checks added in UBSAN:
llvm/llvm-project@7926744

Before this change we see the following UBSAN stack trace in Fuchsia:

  #0    0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e
  #1.2  0x000021982bc4af3c in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x41f3c
  #1.1  0x000021982bc4af3c in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x41f3c
  #1    0x000021982bc4af3c in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:395 <libclang_rt.asan.so>+0x41f3c
  #2    0x000021982bc4bb6f in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x42b6f
  #3    0x000021982bc4b723 in __ubsan_handle_type_mismatch_v1 compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x42723
  #4    0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e
  deepin-community#5    0x000021afcfdf2089 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:355 <platform-bus-x86.so>+0x6b2089
  deepin-community#6    0x000021afcfded169 in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:137 <platform-bus-x86.so>+0x6ad169
  deepin-community#7    0x000021afcfe2d24a in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:237 <platform-bus-x86.so>+0x6ed24a
  deepin-community#8    0x000021afcfde66b7 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x6a66b7
  deepin-community#9    0x000021afcfdf6979 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x6b6979
  deepin-community#10   0x000021afcfdf708f in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x6b708f
  deepin-community#11   0x000021afcfa95dcf in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0x355dcf
  deepin-community#12   0x000021afcfaa8278 in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:84 <platform-bus-x86.so>+0x368278
  deepin-community#13   0x000021afcfbddb87 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x49db87
  deepin-community#14   0x000021afcf99091d in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:95 <platform-bus-x86.so>+0x25091d
  deepin-community#15   0x000021afcf9c1d4e in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:60 <platform-bus-x86.so>+0x281d4e
  deepin-community#16   0x000021afcf9e33ad in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:77 <platform-bus-x86.so>+0x2a33ad
  deepin-community#17   0x000021afcf9e313e in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:76:19), false, false, std::__2::allocator<std::byte>, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:183 <platform-bus-x86.so>+0x2a313e
  deepin-community#18   0x000021afcfbab4c7 in fit::internal::function_base<16UL, false, void(), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <platform-bus-x86.so>+0x46b4c7
  deepin-community#19   0x000021afcfbab342 in fit::function_impl<16UL, false, void(), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/function.h:315 <platform-bus-x86.so>+0x46b342
  deepin-community#20   0x000021afcfcd98c3 in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../sdk/lib/async/task.cc:24 <platform-bus-x86.so>+0x5998c3
  deepin-community#21   0x00002290f9924616 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:789 <libdriver_runtime.so>+0x10a616
  deepin-community#22   0x00002290f9924323 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:788:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x10a323
  deepin-community#23   0x00002290f9904b76 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xeab76
  deepin-community#24   0x00002290f9904831 in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:471 <libdriver_runtime.so>+0xea831
  deepin-community#25   0x00002290f98d5adc in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:74 <libdriver_runtime.so>+0xbbadc
  deepin-community#26   0x00002290f98e1e58 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1248 <libdriver_runtime.so>+0xc7e58
  deepin-community#27   0x00002290f98e4159 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1308 <libdriver_runtime.so>+0xca159
  deepin-community#28   0x00002290f9918414 in λ(const driver_runtime::Dispatcher::create_with_adder::(anon class)*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:353 <libdriver_runtime.so>+0xfe414
  deepin-community#29   0x00002290f991812d in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:351:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xfe12d
  deepin-community#30   0x00002290f9906fc7 in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xecfc7
  deepin-community#31   0x00002290f9906c66 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:315 <libdriver_runtime.so>+0xecc66
  deepin-community#32   0x00002290f98e73d9 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:543 <libdriver_runtime.so>+0xcd3d9
  deepin-community#33   0x00002290f98e700d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1442 <libdriver_runtime.so>+0xcd00d
  deepin-community#34   0x00002290f9918983 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0xfe983
  deepin-community#35   0x00002290f9918b9e in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0xfeb9e
  deepin-community#36   0x00002290f99bf509 in async_loop_dispatch_wait(async_loop_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async-loop/loop.c:394 <libdriver_runtime.so>+0x1a5509
  deepin-community#37   0x00002290f99b9958 in async_loop_run_once(async_loop_t*, zx_time_t) ../../sdk/lib/async-loop/loop.c:343 <libdriver_runtime.so>+0x19f958
  deepin-community#38   0x00002290f99b9247 in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../sdk/lib/async-loop/loop.c:301 <libdriver_runtime.so>+0x19f247
  deepin-community#39   0x00002290f99ba962 in async_loop_run_thread(void*) ../../sdk/lib/async-loop/loop.c:860 <libdriver_runtime.so>+0x1a0962
  deepin-community#40   0x000041afd176ef30 in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:63 <libc.so>+0x84f30
  deepin-community#41   0x000041afd18a448d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x1ba48d

Link: acpica/acpica@1c28da22
Signed-off-by: Rafael J. Wysocki <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Tamir Duberstein <[email protected]>
[ rjw: Pick up the tag from Tamir ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
(cherry picked from commit 7efa7856f460a5e8c63cb891212c6d5f4eafbc46)
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Jul 2, 2025
@tamird @opsiff
ACPICA: Apply pack(1) to union aml_resource
41dc990 
[ Upstream commit eedf3e3c2f2af55dca42b0ea81dffb808211d269 ]

ACPICA commit 1c28da2242783579d59767617121035dafba18c3

This was originally done in NetBSD:
NetBSD/src@b69d1ac
and is the correct alternative to the smattering of `memcpy`s I
previously contributed to this repository.

This also sidesteps the newly strict checks added in UBSAN:
llvm/llvm-project@7926744

Before this change we see the following UBSAN stack trace in Fuchsia:

  #0    0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e
  #1.2  0x000021982bc4af3c in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x41f3c
  #1.1  0x000021982bc4af3c in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x41f3c
  #1    0x000021982bc4af3c in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:395 <libclang_rt.asan.so>+0x41f3c
  #2    0x000021982bc4bb6f in handletype_mismatch_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:137 <libclang_rt.asan.so>+0x42b6f
  #3    0x000021982bc4b723 in __ubsan_handle_type_mismatch_v1 compiler-rt/lib/ubsan/ubsan_handlers.cpp:142 <libclang_rt.asan.so>+0x42723
  #4    0x000021afcfdeca5e in acpi_rs_get_address_common(struct acpi_resource*, union aml_resource*) ../../third_party/acpica/source/components/resources/rsaddr.c:329 <platform-bus-x86.so>+0x6aca5e
  deepin-community#5    0x000021afcfdf2089 in acpi_rs_convert_aml_to_resource(struct acpi_resource*, union aml_resource*, struct acpi_rsconvert_info*) ../../third_party/acpica/source/components/resources/rsmisc.c:355 <platform-bus-x86.so>+0x6b2089
  deepin-community#6    0x000021afcfded169 in acpi_rs_convert_aml_to_resources(u8*, u32, u32, u8, void**) ../../third_party/acpica/source/components/resources/rslist.c:137 <platform-bus-x86.so>+0x6ad169
  deepin-community#7    0x000021afcfe2d24a in acpi_ut_walk_aml_resources(struct acpi_walk_state*, u8*, acpi_size, acpi_walk_aml_callback, void**) ../../third_party/acpica/source/components/utilities/utresrc.c:237 <platform-bus-x86.so>+0x6ed24a
  deepin-community#8    0x000021afcfde66b7 in acpi_rs_create_resource_list(union acpi_operand_object*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rscreate.c:199 <platform-bus-x86.so>+0x6a66b7
  deepin-community#9    0x000021afcfdf6979 in acpi_rs_get_method_data(acpi_handle, const char*, struct acpi_buffer*) ../../third_party/acpica/source/components/resources/rsutils.c:770 <platform-bus-x86.so>+0x6b6979
  deepin-community#10   0x000021afcfdf708f in acpi_walk_resources(acpi_handle, char*, acpi_walk_resource_callback, void*) ../../third_party/acpica/source/components/resources/rsxface.c:731 <platform-bus-x86.so>+0x6b708f
  deepin-community#11   0x000021afcfa95dcf in acpi::acpi_impl::walk_resources(acpi::acpi_impl*, acpi_handle, const char*, acpi::Acpi::resources_callable) ../../src/devices/board/lib/acpi/acpi-impl.cc:41 <platform-bus-x86.so>+0x355dcf
  deepin-community#12   0x000021afcfaa8278 in acpi::device_builder::gather_resources(acpi::device_builder*, acpi::Acpi*, fidl::any_arena&, acpi::Manager*, acpi::device_builder::gather_resources_callback) ../../src/devices/board/lib/acpi/device-builder.cc:84 <platform-bus-x86.so>+0x368278
  deepin-community#13   0x000021afcfbddb87 in acpi::Manager::configure_discovered_devices(acpi::Manager*) ../../src/devices/board/lib/acpi/manager.cc:75 <platform-bus-x86.so>+0x49db87
  deepin-community#14   0x000021afcf99091d in publish_acpi_devices(acpi::Manager*, zx_device_t*, zx_device_t*) ../../src/devices/board/drivers/x86/acpi-nswalk.cc:95 <platform-bus-x86.so>+0x25091d
  deepin-community#15   0x000021afcf9c1d4e in x86::X86::do_init(x86::X86*) ../../src/devices/board/drivers/x86/x86.cc:60 <platform-bus-x86.so>+0x281d4e
  deepin-community#16   0x000021afcf9e33ad in λ(x86::X86::ddk_init::(anon class)*) ../../src/devices/board/drivers/x86/x86.cc:77 <platform-bus-x86.so>+0x2a33ad
  deepin-community#17   0x000021afcf9e313e in fit::internal::target<(lambda at../../src/devices/board/drivers/x86/x86.cc:76:19), false, false, std::__2::allocator<std::byte>, void>::invoke(void*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:183 <platform-bus-x86.so>+0x2a313e
  deepin-community#18   0x000021afcfbab4c7 in fit::internal::function_base<16UL, false, void(), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <platform-bus-x86.so>+0x46b4c7
  deepin-community#19   0x000021afcfbab342 in fit::function_impl<16UL, false, void(), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<16UL, false, void (), std::__2::allocator<std::byte> >*) ../../sdk/lib/fit/include/lib/fit/function.h:315 <platform-bus-x86.so>+0x46b342
  deepin-community#20   0x000021afcfcd98c3 in async::internal::retained_task::Handler(async_dispatcher_t*, async_task_t*, zx_status_t) ../../sdk/lib/async/task.cc:24 <platform-bus-x86.so>+0x5998c3
  deepin-community#21   0x00002290f9924616 in λ(const driver_runtime::Dispatcher::post_task::(anon class)*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/dispatcher.cc:789 <libdriver_runtime.so>+0x10a616
  deepin-community#22   0x00002290f9924323 in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:788:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int>::invoke(void*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0x10a323
  deepin-community#23   0x00002290f9904b76 in fit::internal::function_base<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xeab76
  deepin-community#24   0x00002290f9904831 in fit::callback_impl<24UL, true, void(std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request>>, int), std::__2::allocator<std::byte>>::operator()(fit::callback_impl<24UL, true, void (std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, int) ../../sdk/lib/fit/include/lib/fit/function.h:471 <libdriver_runtime.so>+0xea831
  deepin-community#25   0x00002290f98d5adc in driver_runtime::callback_request::Call(driver_runtime::callback_request*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >, zx_status_t) ../../src/devices/bin/driver_runtime/callback_request.h:74 <libdriver_runtime.so>+0xbbadc
  deepin-community#26   0x00002290f98e1e58 in driver_runtime::Dispatcher::dispatch_callback(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::callback_request, std::__2::default_delete<driver_runtime::callback_request> >) ../../src/devices/bin/driver_runtime/dispatcher.cc:1248 <libdriver_runtime.so>+0xc7e58
  deepin-community#27   0x00002290f98e4159 in driver_runtime::Dispatcher::dispatch_callbacks(driver_runtime::Dispatcher*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:1308 <libdriver_runtime.so>+0xca159
  deepin-community#28   0x00002290f9918414 in λ(const driver_runtime::Dispatcher::create_with_adder::(anon class)*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.cc:353 <libdriver_runtime.so>+0xfe414
  deepin-community#29   0x00002290f991812d in fit::internal::target<(lambda at../../src/devices/bin/driver_runtime/dispatcher.cc:351:7), true, false, std::__2::allocator<std::byte>, void, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>>::invoke(void*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:128 <libdriver_runtime.so>+0xfe12d
  deepin-community#30   0x00002290f9906fc7 in fit::internal::function_base<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::invoke(const fit::internal::function_base<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/internal/function.h:522 <libdriver_runtime.so>+0xecfc7
  deepin-community#31   0x00002290f9906c66 in fit::function_impl<8UL, true, void(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter>>, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte>>::operator()(const fit::function_impl<8UL, true, void (std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>), std::__2::allocator<std::byte> >*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../sdk/lib/fit/include/lib/fit/function.h:315 <libdriver_runtime.so>+0xecc66
  deepin-community#32   0x00002290f98e73d9 in driver_runtime::Dispatcher::event_waiter::invoke_callback(driver_runtime::Dispatcher::event_waiter*, std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, fbl::ref_ptr<driver_runtime::Dispatcher>) ../../src/devices/bin/driver_runtime/dispatcher.h:543 <libdriver_runtime.so>+0xcd3d9
  deepin-community#33   0x00002290f98e700d in driver_runtime::Dispatcher::event_waiter::handle_event(std::__2::unique_ptr<driver_runtime::Dispatcher::event_waiter, std::__2::default_delete<driver_runtime::Dispatcher::event_waiter> >, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/dispatcher.cc:1442 <libdriver_runtime.so>+0xcd00d
  deepin-community#34   0x00002290f9918983 in async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event(async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>*, async_dispatcher_t*, async::wait_base*, zx_status_t, zx_packet_signal_t const*) ../../src/devices/bin/driver_runtime/async_loop_owned_event_handler.h:59 <libdriver_runtime.so>+0xfe983
  deepin-community#35   0x00002290f9918b9e in async::wait_method<async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>, &async_loop_owned_event_handler<driver_runtime::Dispatcher::event_waiter>::handle_event>::call_handler(async_dispatcher_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async/include/lib/async/cpp/wait.h:201 <libdriver_runtime.so>+0xfeb9e
  deepin-community#36   0x00002290f99bf509 in async_loop_dispatch_wait(async_loop_t*, async_wait_t*, zx_status_t, zx_packet_signal_t const*) ../../sdk/lib/async-loop/loop.c:394 <libdriver_runtime.so>+0x1a5509
  deepin-community#37   0x00002290f99b9958 in async_loop_run_once(async_loop_t*, zx_time_t) ../../sdk/lib/async-loop/loop.c:343 <libdriver_runtime.so>+0x19f958
  deepin-community#38   0x00002290f99b9247 in async_loop_run(async_loop_t*, zx_time_t, _Bool) ../../sdk/lib/async-loop/loop.c:301 <libdriver_runtime.so>+0x19f247
  deepin-community#39   0x00002290f99ba962 in async_loop_run_thread(void*) ../../sdk/lib/async-loop/loop.c:860 <libdriver_runtime.so>+0x1a0962
  deepin-community#40   0x000041afd176ef30 in start_c11(void*) ../../zircon/third_party/ulib/musl/pthread/pthread_create.c:63 <libc.so>+0x84f30
  deepin-community#41   0x000041afd18a448d in thread_trampoline(uintptr_t, uintptr_t) ../../zircon/system/ulib/runtime/thread.cc:100 <libc.so>+0x1ba48d

Link: acpica/acpica@1c28da22
Signed-off-by: Rafael J. Wysocki <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Tamir Duberstein <[email protected]>
[ rjw: Pick up the tag from Tamir ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
(cherry picked from commit 7efa7856f460a5e8c63cb891212c6d5f4eafbc46)
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Jul 11, 2025
@pcacjr @opsiff
smb: client: fix warning when reconnecting channel
696e67d 
[ Upstream commit 3bbe46716092d8ef6b0df4b956f585c5cd0fc78e ]

When reconnecting a channel in smb2_reconnect_server(), a dummy tcon
is passed down to smb2_reconnect() with ->query_interface
uninitialized, so we can't call queue_delayed_work() on it.

Fix the following warning by ensuring that we're queueing the delayed
worker from correct tcon.

WARNING: CPU: 4 PID: 1126 at kernel/workqueue.c:2498 __queue_delayed_work+0x1d2/0x200
Modules linked in: cifs cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CPU: 4 UID: 0 PID: 1126 Comm: kworker/4:0 Not tainted 6.16.0-rc3 deepin-community#5 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-4.fc42 04/01/2014
Workqueue: cifsiod smb2_reconnect_server [cifs]
RIP: 0010:__queue_delayed_work+0x1d2/0x200
Code: 41 5e 41 5f e9 7f ee ff ff 90 0f 0b 90 e9 5d ff ff ff bf 02 00
00 00 e8 6c f3 07 00 89 c3 eb bd 90 0f 0b 90 e9 57 f> 0b 90 e9 65 fe
ff ff 90 0f 0b 90 e9 72 fe ff ff 90 0f 0b 90 e9
RSP: 0018:ffffc900014afad8 EFLAGS: 00010003
RAX: 0000000000000000 RBX: ffff888124d99988 RCX: ffffffff81399cc1
RDX: dffffc0000000000 RSI: ffff888114326e00 RDI: ffff888124d999f0
RBP: 000000000000ea60 R08: 0000000000000001 R09: ffffed10249b3331
R10: ffff888124d9998f R11: 0000000000000004 R12: 0000000000000040
R13: ffff888114326e00 R14: ffff888124d999d8 R15: ffff888114939020
FS:  0000000000000000(0000) GS:ffff88829f7fe000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe7a2b4038 CR3: 0000000120a6f000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
 <TASK>
 queue_delayed_work_on+0xb4/0xc0
 smb2_reconnect+0xb22/0xf50 [cifs]
 smb2_reconnect_server+0x413/0xd40 [cifs]
 ? __pfx_smb2_reconnect_server+0x10/0x10 [cifs]
 ? local_clock_noinstr+0xd/0xd0
 ? local_clock+0x15/0x30
 ? lock_release+0x29b/0x390
 process_one_work+0x4c5/0xa10
 ? __pfx_process_one_work+0x10/0x10
 ? __list_add_valid_or_report+0x37/0x120
 worker_thread+0x2f1/0x5a0
 ? __kthread_parkme+0xde/0x100
 ? __pfx_worker_thread+0x10/0x10
 kthread+0x1fe/0x380
 ? kthread+0x10f/0x380
 ? __pfx_kthread+0x10/0x10
 ? local_clock_noinstr+0xd/0xd0
 ? ret_from_fork+0x1b/0x1f0
 ? local_clock+0x15/0x30
 ? lock_release+0x29b/0x390
 ? rcu_is_watching+0x20/0x50
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x15b/0x1f0
 ? __pfx_kthread+0x10/0x10
 ret_from_fork_asm+0x1a/0x30
 </TASK>
irq event stamp: 1116206
hardirqs last  enabled at (1116205): [<ffffffff8143af42>] __up_console_sem+0x52/0x60
hardirqs last disabled at (1116206): [<ffffffff81399f0e>] queue_delayed_work_on+0x6e/0xc0
softirqs last  enabled at (1116138): [<ffffffffc04562fd>] __smb_send_rqst+0x42d/0x950 [cifs]
softirqs last disabled at (1116136): [<ffffffff823d35e1>] release_sock+0x21/0xf0

Cc: [email protected]
Reported-by: David Howells <[email protected]>
Fixes: 42ca547b13a2 ("cifs: do not disable interface polling on failure")
Reviewed-by: David Howells <[email protected]>
Tested-by: David Howells <[email protected]>
Reviewed-by: Shyam Prasad N <[email protected]>
Signed-off-by: Paulo Alcantara (Red Hat) <[email protected]>
Signed-off-by: David Howells <[email protected]>
Tested-by: Steve French <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
(cherry picked from commit 0cee638d92ac898d73eccc4e4bab70e9fc95946a)
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Jul 11, 2025
@pcacjr @opsiff
smb: client: fix warning when reconnecting channel
3414585 
[ Upstream commit 3bbe46716092d8ef6b0df4b956f585c5cd0fc78e ]

When reconnecting a channel in smb2_reconnect_server(), a dummy tcon
is passed down to smb2_reconnect() with ->query_interface
uninitialized, so we can't call queue_delayed_work() on it.

Fix the following warning by ensuring that we're queueing the delayed
worker from correct tcon.

WARNING: CPU: 4 PID: 1126 at kernel/workqueue.c:2498 __queue_delayed_work+0x1d2/0x200
Modules linked in: cifs cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CPU: 4 UID: 0 PID: 1126 Comm: kworker/4:0 Not tainted 6.16.0-rc3 deepin-community#5 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-4.fc42 04/01/2014
Workqueue: cifsiod smb2_reconnect_server [cifs]
RIP: 0010:__queue_delayed_work+0x1d2/0x200
Code: 41 5e 41 5f e9 7f ee ff ff 90 0f 0b 90 e9 5d ff ff ff bf 02 00
00 00 e8 6c f3 07 00 89 c3 eb bd 90 0f 0b 90 e9 57 f> 0b 90 e9 65 fe
ff ff 90 0f 0b 90 e9 72 fe ff ff 90 0f 0b 90 e9
RSP: 0018:ffffc900014afad8 EFLAGS: 00010003
RAX: 0000000000000000 RBX: ffff888124d99988 RCX: ffffffff81399cc1
RDX: dffffc0000000000 RSI: ffff888114326e00 RDI: ffff888124d999f0
RBP: 000000000000ea60 R08: 0000000000000001 R09: ffffed10249b3331
R10: ffff888124d9998f R11: 0000000000000004 R12: 0000000000000040
R13: ffff888114326e00 R14: ffff888124d999d8 R15: ffff888114939020
FS:  0000000000000000(0000) GS:ffff88829f7fe000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe7a2b4038 CR3: 0000000120a6f000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
 <TASK>
 queue_delayed_work_on+0xb4/0xc0
 smb2_reconnect+0xb22/0xf50 [cifs]
 smb2_reconnect_server+0x413/0xd40 [cifs]
 ? __pfx_smb2_reconnect_server+0x10/0x10 [cifs]
 ? local_clock_noinstr+0xd/0xd0
 ? local_clock+0x15/0x30
 ? lock_release+0x29b/0x390
 process_one_work+0x4c5/0xa10
 ? __pfx_process_one_work+0x10/0x10
 ? __list_add_valid_or_report+0x37/0x120
 worker_thread+0x2f1/0x5a0
 ? __kthread_parkme+0xde/0x100
 ? __pfx_worker_thread+0x10/0x10
 kthread+0x1fe/0x380
 ? kthread+0x10f/0x380
 ? __pfx_kthread+0x10/0x10
 ? local_clock_noinstr+0xd/0xd0
 ? ret_from_fork+0x1b/0x1f0
 ? local_clock+0x15/0x30
 ? lock_release+0x29b/0x390
 ? rcu_is_watching+0x20/0x50
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x15b/0x1f0
 ? __pfx_kthread+0x10/0x10
 ret_from_fork_asm+0x1a/0x30
 </TASK>
irq event stamp: 1116206
hardirqs last  enabled at (1116205): [<ffffffff8143af42>] __up_console_sem+0x52/0x60
hardirqs last disabled at (1116206): [<ffffffff81399f0e>] queue_delayed_work_on+0x6e/0xc0
softirqs last  enabled at (1116138): [<ffffffffc04562fd>] __smb_send_rqst+0x42d/0x950 [cifs]
softirqs last disabled at (1116136): [<ffffffff823d35e1>] release_sock+0x21/0xf0

Cc: [email protected]
Reported-by: David Howells <[email protected]>
Fixes: 42ca547b13a2 ("cifs: do not disable interface polling on failure")
Reviewed-by: David Howells <[email protected]>
Tested-by: David Howells <[email protected]>
Reviewed-by: Shyam Prasad N <[email protected]>
Signed-off-by: Paulo Alcantara (Red Hat) <[email protected]>
Signed-off-by: David Howells <[email protected]>
Tested-by: Steve French <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
(cherry picked from commit 3f6932ef25378794894c3c1024092ad14da2d330)
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Jul 11, 2025
@wqyoung @gregkh
asm-generic: sections: refactor memory_intersects
c60ae87 
commit 0c7d7cc upstream.

There are two problems with the current code of memory_intersects:

First, it doesn't check whether the region (begin, end) falls inside the
region (virt, vend), that is (virt < begin && vend > end).

The second problem is if vend is equal to begin, it will return true but
this is wrong since vend (virt + size) is not the last address of the
memory region but (virt + size -1) is.  The wrong determination will
trigger the misreporting when the function check_for_illegal_area calls
memory_intersects to check if the dma region intersects with stext region.

The misreporting is as below (stext is at 0x80100000):
 WARNING: CPU: 0 PID: 77 at kernel/dma/debug.c:1073 check_for_illegal_area+0x130/0x168
 DMA-API: chipidea-usb2 e0002000.usb: device driver maps memory from kernel text or rodata [addr=800f0000] [len=65536]
 Modules linked in:
 CPU: 1 PID: 77 Comm: usb-storage Not tainted 5.19.0-yocto-standard deepin-community#5
 Hardware name: Xilinx Zynq Platform
  unwind_backtrace from show_stack+0x18/0x1c
  show_stack from dump_stack_lvl+0x58/0x70
  dump_stack_lvl from __warn+0xb0/0x198
  __warn from warn_slowpath_fmt+0x80/0xb4
  warn_slowpath_fmt from check_for_illegal_area+0x130/0x168
  check_for_illegal_area from debug_dma_map_sg+0x94/0x368
  debug_dma_map_sg from __dma_map_sg_attrs+0x114/0x128
  __dma_map_sg_attrs from dma_map_sg_attrs+0x18/0x24
  dma_map_sg_attrs from usb_hcd_map_urb_for_dma+0x250/0x3b4
  usb_hcd_map_urb_for_dma from usb_hcd_submit_urb+0x194/0x214
  usb_hcd_submit_urb from usb_sg_wait+0xa4/0x118
  usb_sg_wait from usb_stor_bulk_transfer_sglist+0xa0/0xec
  usb_stor_bulk_transfer_sglist from usb_stor_bulk_srb+0x38/0x70
  usb_stor_bulk_srb from usb_stor_Bulk_transport+0x150/0x360
  usb_stor_Bulk_transport from usb_stor_invoke_transport+0x38/0x440
  usb_stor_invoke_transport from usb_stor_control_thread+0x1e0/0x238
  usb_stor_control_thread from kthread+0xf8/0x104
  kthread from ret_from_fork+0x14/0x2c

Refactor memory_intersects to fix the two problems above.

Before the 1d7db83 ("dma-debug: use memory_intersects()
directly"), memory_intersects is called only by printk_late_init:

printk_late_init -> init_section_intersects ->memory_intersects.

There were few places where memory_intersects was called.

When commit 1d7db83 ("dma-debug: use memory_intersects()
directly") was merged and CONFIG_DMA_API_DEBUG is enabled, the DMA
subsystem uses it to check for an illegal area and the calltrace above
is triggered.

[[email protected]: fix nearby comment typo]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 9795593 ("asm/sections: add helpers to check for section data")
Signed-off-by: Quanyang Wang <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Jul 11, 2025
@gregkh
ipv6: sr: fix out-of-bounds read when setting HMAC data.
076f247 
[ Upstream commit 84a5358 ]

The SRv6 layer allows defining HMAC data that can later be used to sign IPv6
Segment Routing Headers. This configuration is realised via netlink through
four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and
SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual
length of the SECRET attribute, it is possible to provide invalid combinations
(e.g., secret = "", secretlen = 64). This case is not checked in the code and
with an appropriately crafted netlink message, an out-of-bounds read of up
to 64 bytes (max secret length) can occur past the skb end pointer and into
skb_shared_info:

Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208
208		memcpy(hinfo->secret, secret, slen);
(gdb) bt
 #0  seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208
 #1  0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600,
    extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>,
    family=<optimized out>) at net/netlink/genetlink.c:731
 #2  0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00,
    family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775
 #3  genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792
 #4  0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>)
    at net/netlink/af_netlink.c:2501
 deepin-community#5  0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803
 deepin-community#6  0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000)
    at net/netlink/af_netlink.c:1319
 deepin-community#7  netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>)
    at net/netlink/af_netlink.c:1345
 deepin-community#8  0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921
...
(gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end
$1 = 0xffff88800b1b76c0
(gdb) p/x secret
$2 = 0xffff88800b1b76c0
(gdb) p slen
$3 = 64 '@'

The OOB data can then be read back from userspace by dumping HMAC state. This
commit fixes this by ensuring SECRETLEN cannot exceed the actual length of
SECRET.

Reported-by: Lucas Leong <[email protected]>
Tested: verified that EINVAL is correctly returned when secretlen > len(secret)
Fixes: 4f4853d ("ipv6: sr: implement API to control SR HMAC structure")
Signed-off-by: David Lebrun <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Jul 11, 2025
@gregkh
ntfs: fix BUG_ON in ntfs_lookup_inode_by_name()
a48daec 
commit 1b513f6 upstream.

Syzkaller reported BUG_ON as follows:

------------[ cut here ]------------
kernel BUG at fs/ntfs/dir.c:86!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 3 PID: 758 Comm: a.out Not tainted 5.19.0-next-20220808 deepin-community#5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:ntfs_lookup_inode_by_name+0xd11/0x2d10
Code: ff e9 b9 01 00 00 e8 1e fe d6 fe 48 8b 7d 98 49 8d 5d 07 e8 91 85 29 ff 48 c7 45 98 00 00 00 00 e9 5a fb ff ff e8 ff fd d6 fe <0f> 0b e8 f8 fd d6 fe 0f 0b e8 f1 fd d6 fe 48 8b b5 50 ff ff ff 4c
RSP: 0018:ffff888079607978 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000008000 RCX: 0000000000000000
RDX: ffff88807cf10000 RSI: ffffffff82a4a081 RDI: 0000000000000003
RBP: ffff888079607a70 R08: 0000000000000001 R09: ffff88807a6d01d7
R10: ffffed100f4da03a R11: 0000000000000000 R12: ffff88800f0fb110
R13: ffff88800f0ee000 R14: ffff88800f0fb000 R15: 0000000000000001
FS:  00007f33b63c7540(0000) GS:ffff888108580000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f33b635c090 CR3: 000000000f39e005 CR4: 0000000000770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 load_system_files+0x1f7f/0x3620
 ntfs_fill_super+0xa01/0x1be0
 mount_bdev+0x36a/0x440
 ntfs_mount+0x3a/0x50
 legacy_get_tree+0xfb/0x210
 vfs_get_tree+0x8f/0x2f0
 do_new_mount+0x30a/0x760
 path_mount+0x4de/0x1880
 __x64_sys_mount+0x2b3/0x340
 do_syscall_64+0x38/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f33b62ff9ea
Code: 48 8b 0d a9 f4 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 76 f4 0b 00 f7 d8 64 89 01 48
RSP: 002b:00007ffd0c471aa8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f33b62ff9ea
RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007ffd0c471be0
RBP: 00007ffd0c471c60 R08: 00007ffd0c471ae0 R09: 00007ffd0c471c24
R10: 0000000000000000 R11: 0000000000000202 R12: 000055bac5afc160
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 </TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---

Fix this by adding sanity check on extended system files' directory inode
to ensure that it is directory, just like ntfs_extend_init() when mounting
ntfs3.

Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: ChenXiaoSong <[email protected]>
Cc: Anton Altaparmakov <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Jul 14, 2025
@pcacjr @opsiff
smb: client: fix warning when reconnecting channel
f7c5d3b 
[ Upstream commit 3bbe46716092d8ef6b0df4b956f585c5cd0fc78e ]

When reconnecting a channel in smb2_reconnect_server(), a dummy tcon
is passed down to smb2_reconnect() with ->query_interface
uninitialized, so we can't call queue_delayed_work() on it.

Fix the following warning by ensuring that we're queueing the delayed
worker from correct tcon.

WARNING: CPU: 4 PID: 1126 at kernel/workqueue.c:2498 __queue_delayed_work+0x1d2/0x200
Modules linked in: cifs cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs]
CPU: 4 UID: 0 PID: 1126 Comm: kworker/4:0 Not tainted 6.16.0-rc3 deepin-community#5 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-4.fc42 04/01/2014
Workqueue: cifsiod smb2_reconnect_server [cifs]
RIP: 0010:__queue_delayed_work+0x1d2/0x200
Code: 41 5e 41 5f e9 7f ee ff ff 90 0f 0b 90 e9 5d ff ff ff bf 02 00
00 00 e8 6c f3 07 00 89 c3 eb bd 90 0f 0b 90 e9 57 f> 0b 90 e9 65 fe
ff ff 90 0f 0b 90 e9 72 fe ff ff 90 0f 0b 90 e9
RSP: 0018:ffffc900014afad8 EFLAGS: 00010003
RAX: 0000000000000000 RBX: ffff888124d99988 RCX: ffffffff81399cc1
RDX: dffffc0000000000 RSI: ffff888114326e00 RDI: ffff888124d999f0
RBP: 000000000000ea60 R08: 0000000000000001 R09: ffffed10249b3331
R10: ffff888124d9998f R11: 0000000000000004 R12: 0000000000000040
R13: ffff888114326e00 R14: ffff888124d999d8 R15: ffff888114939020
FS:  0000000000000000(0000) GS:ffff88829f7fe000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe7a2b4038 CR3: 0000000120a6f000 CR4: 0000000000750ef0
PKRU: 55555554
Call Trace:
 <TASK>
 queue_delayed_work_on+0xb4/0xc0
 smb2_reconnect+0xb22/0xf50 [cifs]
 smb2_reconnect_server+0x413/0xd40 [cifs]
 ? __pfx_smb2_reconnect_server+0x10/0x10 [cifs]
 ? local_clock_noinstr+0xd/0xd0
 ? local_clock+0x15/0x30
 ? lock_release+0x29b/0x390
 process_one_work+0x4c5/0xa10
 ? __pfx_process_one_work+0x10/0x10
 ? __list_add_valid_or_report+0x37/0x120
 worker_thread+0x2f1/0x5a0
 ? __kthread_parkme+0xde/0x100
 ? __pfx_worker_thread+0x10/0x10
 kthread+0x1fe/0x380
 ? kthread+0x10f/0x380
 ? __pfx_kthread+0x10/0x10
 ? local_clock_noinstr+0xd/0xd0
 ? ret_from_fork+0x1b/0x1f0
 ? local_clock+0x15/0x30
 ? lock_release+0x29b/0x390
 ? rcu_is_watching+0x20/0x50
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x15b/0x1f0
 ? __pfx_kthread+0x10/0x10
 ret_from_fork_asm+0x1a/0x30
 </TASK>
irq event stamp: 1116206
hardirqs last  enabled at (1116205): [<ffffffff8143af42>] __up_console_sem+0x52/0x60
hardirqs last disabled at (1116206): [<ffffffff81399f0e>] queue_delayed_work_on+0x6e/0xc0
softirqs last  enabled at (1116138): [<ffffffffc04562fd>] __smb_send_rqst+0x42d/0x950 [cifs]
softirqs last disabled at (1116136): [<ffffffff823d35e1>] release_sock+0x21/0xf0

Cc: [email protected]
Reported-by: David Howells <[email protected]>
Fixes: 42ca547b13a2 ("cifs: do not disable interface polling on failure")
Reviewed-by: David Howells <[email protected]>
Tested-by: David Howells <[email protected]>
Reviewed-by: Shyam Prasad N <[email protected]>
Signed-off-by: Paulo Alcantara (Red Hat) <[email protected]>
Signed-off-by: David Howells <[email protected]>
Tested-by: Steve French <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
(cherry picked from commit 0cee638d92ac898d73eccc4e4bab70e9fc95946a)
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Aug 3, 2025
@ebirger @opsiff
xfrm: interface: fix use-after-free after changing collect_md xfrm in…
3da34d2 
…terface

[ Upstream commit a90b2a1aaacbcf0f91d7e4868ad6c51c5dee814b ]

collect_md property on xfrm interfaces can only be set on device creation,
thus xfrmi_changelink() should fail when called on such interfaces.

The check to enforce this was done only in the case where the xi was
returned from xfrmi_locate() which doesn't look for the collect_md
interface, and thus the validation was never reached.

Calling changelink would thus errornously place the special interface xi
in the xfrmi_net->xfrmi hash, but since it also exists in the
xfrmi_net->collect_md_xfrmi pointer it would lead to a double free when
the net namespace was taken down [1].

Change the check to use the xi from netdev_priv which is available earlier
in the function to prevent changes in xfrm collect_md interfaces.

[1] resulting oops:
[    8.516540] kernel BUG at net/core/dev.c:12029!
[    8.516552] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[    8.516559] CPU: 0 UID: 0 PID: 12 Comm: kworker/u80:0 Not tainted 6.15.0-virtme deepin-community#5 PREEMPT(voluntary)
[    8.516565] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[    8.516569] Workqueue: netns cleanup_net
[    8.516579] RIP: 0010:unregister_netdevice_many_notify+0x101/0xab0
[    8.516590] Code: 90 0f 0b 90 48 8b b0 78 01 00 00 48 8b 90 80 01 00 00 48 89 56 08 48 89 32 4c 89 80 78 01 00 00 48 89 b8 80 01 00 00 eb ac 90 <0f> 0b 48 8b 45 00 4c 8d a0 88 fe ff ff 48 39 c5 74 5c 41 80 bc 24
[    8.516593] RSP: 0018:ffffa93b8006bd30 EFLAGS: 00010206
[    8.516598] RAX: ffff98fe4226e000 RBX: ffffa93b8006bd58 RCX: ffffa93b8006bc60
[    8.516601] RDX: 0000000000000004 RSI: 0000000000000000 RDI: dead000000000122
[    8.516603] RBP: ffffa93b8006bdd8 R08: dead000000000100 R09: ffff98fe4133c100
[    8.516605] R10: 0000000000000000 R11: 00000000000003d2 R12: ffffa93b8006be00
[    8.516608] R13: ffffffff96c1a510 R14: ffffffff96c1a510 R15: ffffa93b8006be00
[    8.516615] FS:  0000000000000000(0000) GS:ffff98fee73b7000(0000) knlGS:0000000000000000
[    8.516619] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    8.516622] CR2: 00007fcd2abd0700 CR3: 000000003aa40000 CR4: 0000000000752ef0
[    8.516625] PKRU: 55555554
[    8.516627] Call Trace:
[    8.516632]  <TASK>
[    8.516635]  ? rtnl_is_locked+0x15/0x20
[    8.516641]  ? unregister_netdevice_queue+0x29/0xf0
[    8.516650]  ops_undo_list+0x1f2/0x220
[    8.516659]  cleanup_net+0x1ad/0x2e0
[    8.516664]  process_one_work+0x160/0x380
[    8.516673]  worker_thread+0x2aa/0x3c0
[    8.516679]  ? __pfx_worker_thread+0x10/0x10
[    8.516686]  kthread+0xfb/0x200
[    8.516690]  ? __pfx_kthread+0x10/0x10
[    8.516693]  ? __pfx_kthread+0x10/0x10
[    8.516697]  ret_from_fork+0x82/0xf0
[    8.516705]  ? __pfx_kthread+0x10/0x10
[    8.516709]  ret_from_fork_asm+0x1a/0x30
[    8.516718]  </TASK>

Fixes: abc340b ("xfrm: interface: support collect metadata mode")
Reported-by: Lonial Con <[email protected]>
Signed-off-by: Eyal Birger <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
(cherry picked from commit 5918c3f4800a3aef2173865e5903370f21e24f47)
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Aug 4, 2025
@ebirger @opsiff
xfrm: interface: fix use-after-free after changing collect_md xfrm in…
661d382 
…terface

[ Upstream commit a90b2a1aaacbcf0f91d7e4868ad6c51c5dee814b ]

collect_md property on xfrm interfaces can only be set on device creation,
thus xfrmi_changelink() should fail when called on such interfaces.

The check to enforce this was done only in the case where the xi was
returned from xfrmi_locate() which doesn't look for the collect_md
interface, and thus the validation was never reached.

Calling changelink would thus errornously place the special interface xi
in the xfrmi_net->xfrmi hash, but since it also exists in the
xfrmi_net->collect_md_xfrmi pointer it would lead to a double free when
the net namespace was taken down [1].

Change the check to use the xi from netdev_priv which is available earlier
in the function to prevent changes in xfrm collect_md interfaces.

[1] resulting oops:
[    8.516540] kernel BUG at net/core/dev.c:12029!
[    8.516552] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[    8.516559] CPU: 0 UID: 0 PID: 12 Comm: kworker/u80:0 Not tainted 6.15.0-virtme deepin-community#5 PREEMPT(voluntary)
[    8.516565] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[    8.516569] Workqueue: netns cleanup_net
[    8.516579] RIP: 0010:unregister_netdevice_many_notify+0x101/0xab0
[    8.516590] Code: 90 0f 0b 90 48 8b b0 78 01 00 00 48 8b 90 80 01 00 00 48 89 56 08 48 89 32 4c 89 80 78 01 00 00 48 89 b8 80 01 00 00 eb ac 90 <0f> 0b 48 8b 45 00 4c 8d a0 88 fe ff ff 48 39 c5 74 5c 41 80 bc 24
[    8.516593] RSP: 0018:ffffa93b8006bd30 EFLAGS: 00010206
[    8.516598] RAX: ffff98fe4226e000 RBX: ffffa93b8006bd58 RCX: ffffa93b8006bc60
[    8.516601] RDX: 0000000000000004 RSI: 0000000000000000 RDI: dead000000000122
[    8.516603] RBP: ffffa93b8006bdd8 R08: dead000000000100 R09: ffff98fe4133c100
[    8.516605] R10: 0000000000000000 R11: 00000000000003d2 R12: ffffa93b8006be00
[    8.516608] R13: ffffffff96c1a510 R14: ffffffff96c1a510 R15: ffffa93b8006be00
[    8.516615] FS:  0000000000000000(0000) GS:ffff98fee73b7000(0000) knlGS:0000000000000000
[    8.516619] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    8.516622] CR2: 00007fcd2abd0700 CR3: 000000003aa40000 CR4: 0000000000752ef0
[    8.516625] PKRU: 55555554
[    8.516627] Call Trace:
[    8.516632]  <TASK>
[    8.516635]  ? rtnl_is_locked+0x15/0x20
[    8.516641]  ? unregister_netdevice_queue+0x29/0xf0
[    8.516650]  ops_undo_list+0x1f2/0x220
[    8.516659]  cleanup_net+0x1ad/0x2e0
[    8.516664]  process_one_work+0x160/0x380
[    8.516673]  worker_thread+0x2aa/0x3c0
[    8.516679]  ? __pfx_worker_thread+0x10/0x10
[    8.516686]  kthread+0xfb/0x200
[    8.516690]  ? __pfx_kthread+0x10/0x10
[    8.516693]  ? __pfx_kthread+0x10/0x10
[    8.516697]  ret_from_fork+0x82/0xf0
[    8.516705]  ? __pfx_kthread+0x10/0x10
[    8.516709]  ret_from_fork_asm+0x1a/0x30
[    8.516718]  </TASK>

Fixes: abc340b ("xfrm: interface: support collect metadata mode")
Reported-by: Lonial Con <[email protected]>
Signed-off-by: Eyal Birger <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
(cherry picked from commit bfebdb85496e1da21d3cf05de099210915c3e706)
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Aug 4, 2025
@ebirger @opsiff
xfrm: interface: fix use-after-free after changing collect_md xfrm in…
68d35f7 
…terface

[ Upstream commit a90b2a1aaacbcf0f91d7e4868ad6c51c5dee814b ]

collect_md property on xfrm interfaces can only be set on device creation,
thus xfrmi_changelink() should fail when called on such interfaces.

The check to enforce this was done only in the case where the xi was
returned from xfrmi_locate() which doesn't look for the collect_md
interface, and thus the validation was never reached.

Calling changelink would thus errornously place the special interface xi
in the xfrmi_net->xfrmi hash, but since it also exists in the
xfrmi_net->collect_md_xfrmi pointer it would lead to a double free when
the net namespace was taken down [1].

Change the check to use the xi from netdev_priv which is available earlier
in the function to prevent changes in xfrm collect_md interfaces.

[1] resulting oops:
[    8.516540] kernel BUG at net/core/dev.c:12029!
[    8.516552] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[    8.516559] CPU: 0 UID: 0 PID: 12 Comm: kworker/u80:0 Not tainted 6.15.0-virtme deepin-community#5 PREEMPT(voluntary)
[    8.516565] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[    8.516569] Workqueue: netns cleanup_net
[    8.516579] RIP: 0010:unregister_netdevice_many_notify+0x101/0xab0
[    8.516590] Code: 90 0f 0b 90 48 8b b0 78 01 00 00 48 8b 90 80 01 00 00 48 89 56 08 48 89 32 4c 89 80 78 01 00 00 48 89 b8 80 01 00 00 eb ac 90 <0f> 0b 48 8b 45 00 4c 8d a0 88 fe ff ff 48 39 c5 74 5c 41 80 bc 24
[    8.516593] RSP: 0018:ffffa93b8006bd30 EFLAGS: 00010206
[    8.516598] RAX: ffff98fe4226e000 RBX: ffffa93b8006bd58 RCX: ffffa93b8006bc60
[    8.516601] RDX: 0000000000000004 RSI: 0000000000000000 RDI: dead000000000122
[    8.516603] RBP: ffffa93b8006bdd8 R08: dead000000000100 R09: ffff98fe4133c100
[    8.516605] R10: 0000000000000000 R11: 00000000000003d2 R12: ffffa93b8006be00
[    8.516608] R13: ffffffff96c1a510 R14: ffffffff96c1a510 R15: ffffa93b8006be00
[    8.516615] FS:  0000000000000000(0000) GS:ffff98fee73b7000(0000) knlGS:0000000000000000
[    8.516619] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    8.516622] CR2: 00007fcd2abd0700 CR3: 000000003aa40000 CR4: 0000000000752ef0
[    8.516625] PKRU: 55555554
[    8.516627] Call Trace:
[    8.516632]  <TASK>
[    8.516635]  ? rtnl_is_locked+0x15/0x20
[    8.516641]  ? unregister_netdevice_queue+0x29/0xf0
[    8.516650]  ops_undo_list+0x1f2/0x220
[    8.516659]  cleanup_net+0x1ad/0x2e0
[    8.516664]  process_one_work+0x160/0x380
[    8.516673]  worker_thread+0x2aa/0x3c0
[    8.516679]  ? __pfx_worker_thread+0x10/0x10
[    8.516686]  kthread+0xfb/0x200
[    8.516690]  ? __pfx_kthread+0x10/0x10
[    8.516693]  ? __pfx_kthread+0x10/0x10
[    8.516697]  ret_from_fork+0x82/0xf0
[    8.516705]  ? __pfx_kthread+0x10/0x10
[    8.516709]  ret_from_fork_asm+0x1a/0x30
[    8.516718]  </TASK>

Fixes: abc340b ("xfrm: interface: support collect metadata mode")
Reported-by: Lonial Con <[email protected]>
Signed-off-by: Eyal Birger <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
(cherry picked from commit 5918c3f4800a3aef2173865e5903370f21e24f47)
Cryolitia pushed a commit to Cryolitia-Forks/kernel that referenced this pull request Aug 5, 2025
@anakryiko @Cryolitia
bpf: Validate global subprogs lazily
c1b653e 
commit 2afae08 upstream.

Slightly change BPF verifier logic around eagerness and order of global
subprog validation. Instead of going over every global subprog eagerly
and validating it before main (entry) BPF program is verified, turn it
around. Validate main program first, mark subprogs that were called from
main program for later verification, but otherwise assume it is valid.
Afterwards, go over marked global subprogs and validate those,
potentially marking some more global functions as being called. Continue
this process until all (transitively) callable global subprogs are
validated. It's a BFS traversal at its heart and will always converge.

This is an important change because it allows to feature-gate some
subprograms that might not be verifiable on some older kernel, depending
on supported set of features.

E.g., at some point, global functions were allowed to accept a pointer
to memory, which size is identified by user-provided type.
Unfortunately, older kernels don't support this feature. With BPF CO-RE
approach, the natural way would be to still compile BPF object file once
and guard calls to this global subprog with some CO-RE check or using
.rodata variables. That's what people do to guard usage of new helpers
or kfuncs, and any other new BPF-side feature that might be missing on
old kernels.

That's currently impossible to do with global subprogs, unfortunately,
because they are eagerly and unconditionally validated. This patch set
aims to change this, so that in the future when global funcs gain new
features, those can be guarded using BPF CO-RE techniques in the same
fashion as any other new kernel feature.

Two selftests had to be adjusted in sync with these changes.

test_global_func12 relied on eager global subprog validation failing
before main program failure is detected (unknown return value). Fix by
making sure that main program is always valid.

verifier_subprog_precision's parent_stack_slot_precise subtest relied on
verifier checkpointing heuristic to do a checkpoint at instruction deepin-community#5,
but that's no longer true because we don't have enough jumps validated
before reaching insn deepin-community#5 due to global subprogs being validated later.

Other than that, no changes, as one would expect.

Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
[dtcccc: Drop exception callback check because we do not introduce
commit f18b03f ("bpf: Implement BPF exceptions").]
Signed-off-by: Tianchen Ding <[email protected]>
Cryolitia pushed a commit to Cryolitia-Forks/kernel that referenced this pull request Aug 7, 2025
@anakryiko @Cryolitia
bpf: Validate global subprogs lazily
99ad117 
commit 2afae08 upstream.

Slightly change BPF verifier logic around eagerness and order of global
subprog validation. Instead of going over every global subprog eagerly
and validating it before main (entry) BPF program is verified, turn it
around. Validate main program first, mark subprogs that were called from
main program for later verification, but otherwise assume it is valid.
Afterwards, go over marked global subprogs and validate those,
potentially marking some more global functions as being called. Continue
this process until all (transitively) callable global subprogs are
validated. It's a BFS traversal at its heart and will always converge.

This is an important change because it allows to feature-gate some
subprograms that might not be verifiable on some older kernel, depending
on supported set of features.

E.g., at some point, global functions were allowed to accept a pointer
to memory, which size is identified by user-provided type.
Unfortunately, older kernels don't support this feature. With BPF CO-RE
approach, the natural way would be to still compile BPF object file once
and guard calls to this global subprog with some CO-RE check or using
.rodata variables. That's what people do to guard usage of new helpers
or kfuncs, and any other new BPF-side feature that might be missing on
old kernels.

That's currently impossible to do with global subprogs, unfortunately,
because they are eagerly and unconditionally validated. This patch set
aims to change this, so that in the future when global funcs gain new
features, those can be guarded using BPF CO-RE techniques in the same
fashion as any other new kernel feature.

Two selftests had to be adjusted in sync with these changes.

test_global_func12 relied on eager global subprog validation failing
before main program failure is detected (unknown return value). Fix by
making sure that main program is always valid.

verifier_subprog_precision's parent_stack_slot_precise subtest relied on
verifier checkpointing heuristic to do a checkpoint at instruction deepin-community#5,
but that's no longer true because we don't have enough jumps validated
before reaching insn deepin-community#5 due to global subprogs being validated later.

Other than that, no changes, as one would expect.

Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
[dtcccc: Drop exception callback check because we do not introduce
commit f18b03f ("bpf: Implement BPF exceptions").]
Signed-off-by: Tianchen Ding <[email protected]>
Cryolitia pushed a commit to Cryolitia-Forks/kernel that referenced this pull request Aug 12, 2025
@anakryiko @Cryolitia
bpf: Validate global subprogs lazily
0293dad 
commit 2afae08 upstream.

Slightly change BPF verifier logic around eagerness and order of global
subprog validation. Instead of going over every global subprog eagerly
and validating it before main (entry) BPF program is verified, turn it
around. Validate main program first, mark subprogs that were called from
main program for later verification, but otherwise assume it is valid.
Afterwards, go over marked global subprogs and validate those,
potentially marking some more global functions as being called. Continue
this process until all (transitively) callable global subprogs are
validated. It's a BFS traversal at its heart and will always converge.

This is an important change because it allows to feature-gate some
subprograms that might not be verifiable on some older kernel, depending
on supported set of features.

E.g., at some point, global functions were allowed to accept a pointer
to memory, which size is identified by user-provided type.
Unfortunately, older kernels don't support this feature. With BPF CO-RE
approach, the natural way would be to still compile BPF object file once
and guard calls to this global subprog with some CO-RE check or using
.rodata variables. That's what people do to guard usage of new helpers
or kfuncs, and any other new BPF-side feature that might be missing on
old kernels.

That's currently impossible to do with global subprogs, unfortunately,
because they are eagerly and unconditionally validated. This patch set
aims to change this, so that in the future when global funcs gain new
features, those can be guarded using BPF CO-RE techniques in the same
fashion as any other new kernel feature.

Two selftests had to be adjusted in sync with these changes.

test_global_func12 relied on eager global subprog validation failing
before main program failure is detected (unknown return value). Fix by
making sure that main program is always valid.

verifier_subprog_precision's parent_stack_slot_precise subtest relied on
verifier checkpointing heuristic to do a checkpoint at instruction deepin-community#5,
but that's no longer true because we don't have enough jumps validated
before reaching insn deepin-community#5 due to global subprogs being validated later.

Other than that, no changes, as one would expect.

Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
[dtcccc: Drop exception callback check because we do not introduce
commit f18b03f ("bpf: Implement BPF exceptions").]
Signed-off-by: Tianchen Ding <[email protected]>
Cryolitia pushed a commit to Cryolitia-Forks/kernel that referenced this pull request Aug 12, 2025
@anakryiko @Cryolitia
bpf: Validate global subprogs lazily
3fc23e7 
commit 2afae08 upstream.

Slightly change BPF verifier logic around eagerness and order of global
subprog validation. Instead of going over every global subprog eagerly
and validating it before main (entry) BPF program is verified, turn it
around. Validate main program first, mark subprogs that were called from
main program for later verification, but otherwise assume it is valid.
Afterwards, go over marked global subprogs and validate those,
potentially marking some more global functions as being called. Continue
this process until all (transitively) callable global subprogs are
validated. It's a BFS traversal at its heart and will always converge.

This is an important change because it allows to feature-gate some
subprograms that might not be verifiable on some older kernel, depending
on supported set of features.

E.g., at some point, global functions were allowed to accept a pointer
to memory, which size is identified by user-provided type.
Unfortunately, older kernels don't support this feature. With BPF CO-RE
approach, the natural way would be to still compile BPF object file once
and guard calls to this global subprog with some CO-RE check or using
.rodata variables. That's what people do to guard usage of new helpers
or kfuncs, and any other new BPF-side feature that might be missing on
old kernels.

That's currently impossible to do with global subprogs, unfortunately,
because they are eagerly and unconditionally validated. This patch set
aims to change this, so that in the future when global funcs gain new
features, those can be guarded using BPF CO-RE techniques in the same
fashion as any other new kernel feature.

Two selftests had to be adjusted in sync with these changes.

test_global_func12 relied on eager global subprog validation failing
before main program failure is detected (unknown return value). Fix by
making sure that main program is always valid.

verifier_subprog_precision's parent_stack_slot_precise subtest relied on
verifier checkpointing heuristic to do a checkpoint at instruction deepin-community#5,
but that's no longer true because we don't have enough jumps validated
before reaching insn deepin-community#5 due to global subprogs being validated later.

Other than that, no changes, as one would expect.

Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
[dtcccc: Drop exception callback check because we do not introduce
commit f18b03f ("bpf: Implement BPF exceptions").]
Signed-off-by: Tianchen Ding <[email protected]>
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Oct 13, 2025
@opsiff
binder: fix double-free in dbitmap
cd9f5f1 
commit 3ebcd3460cad351f198c39c6edb4af519a0ed934 upstream.

A process might fail to allocate a new bitmap when trying to expand its
proc->dmap. In that case, dbitmap_grow() fails and frees the old bitmap
via dbitmap_free(). However, the driver calls dbitmap_free() again when
the same process terminates, leading to a double-free error:

  ==================================================================
  BUG: KASAN: double-free in binder_proc_dec_tmpref+0x2e0/0x55c
  Free of addr ffff00000b7c1420 by task kworker/9:1/209

  CPU: 9 UID: 0 PID: 209 Comm: kworker/9:1 Not tainted 6.17.0-rc6-dirty deepin-community#5 PREEMPT
  Hardware name: linux,dummy-virt (DT)
  Workqueue: events binder_deferred_func
  Call trace:
   kfree+0x164/0x31c
   binder_proc_dec_tmpref+0x2e0/0x55c
   binder_deferred_func+0xc24/0x1120
   process_one_work+0x520/0xba4
  [...]

  Allocated by task 448:
   __kmalloc_noprof+0x178/0x3c0
   bitmap_zalloc+0x24/0x30
   binder_open+0x14c/0xc10
  [...]

  Freed by task 449:
   kfree+0x184/0x31c
   binder_inc_ref_for_node+0xb44/0xe44
   binder_transaction+0x29b4/0x7fbc
   binder_thread_write+0x1708/0x442c
   binder_ioctl+0x1b50/0x2900
  [...]
  ==================================================================

Fix this issue by marking proc->map NULL in dbitmap_free().

Cc: [email protected]
Fixes: 15d9da3 ("binder: use bitmap for faster descriptor lookup")
Signed-off-by: Carlos Llamas <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Reviewed-by: Tiffany Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
(cherry picked from commit c301ec61ce6f16e21a36b99225ca8a20c1591e10)
opsiff pushed a commit that referenced this pull request Oct 14, 2025
@opsiff
binder: fix double-free in dbitmap
b0a19c9 
commit 3ebcd3460cad351f198c39c6edb4af519a0ed934 upstream.

A process might fail to allocate a new bitmap when trying to expand its
proc->dmap. In that case, dbitmap_grow() fails and frees the old bitmap
via dbitmap_free(). However, the driver calls dbitmap_free() again when
the same process terminates, leading to a double-free error:

  ==================================================================
  BUG: KASAN: double-free in binder_proc_dec_tmpref+0x2e0/0x55c
  Free of addr ffff00000b7c1420 by task kworker/9:1/209

  CPU: 9 UID: 0 PID: 209 Comm: kworker/9:1 Not tainted 6.17.0-rc6-dirty #5 PREEMPT
  Hardware name: linux,dummy-virt (DT)
  Workqueue: events binder_deferred_func
  Call trace:
   kfree+0x164/0x31c
   binder_proc_dec_tmpref+0x2e0/0x55c
   binder_deferred_func+0xc24/0x1120
   process_one_work+0x520/0xba4
  [...]

  Allocated by task 448:
   __kmalloc_noprof+0x178/0x3c0
   bitmap_zalloc+0x24/0x30
   binder_open+0x14c/0xc10
  [...]

  Freed by task 449:
   kfree+0x184/0x31c
   binder_inc_ref_for_node+0xb44/0xe44
   binder_transaction+0x29b4/0x7fbc
   binder_thread_write+0x1708/0x442c
   binder_ioctl+0x1b50/0x2900
  [...]
  ==================================================================

Fix this issue by marking proc->map NULL in dbitmap_free().

Cc: [email protected]
Fixes: 15d9da3 ("binder: use bitmap for faster descriptor lookup")
Signed-off-by: Carlos Llamas <[email protected]>
Reviewed-by: Alice Ryhl <[email protected]>
Reviewed-by: Tiffany Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
(cherry picked from commit c301ec61ce6f16e21a36b99225ca8a20c1591e10)
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Oct 20, 2025
@captain5050 @opsiff
perf test: Don't leak workload gopipe in PERF_RECORD_*
377b58c 
[ Upstream commit 48918cacefd226af44373e914e63304927c0e7dc ]

The test starts a workload and then opens events. If the events fail
to open, for example because of perf_event_paranoid, the gopipe of the
workload is leaked and the file descriptor leak check fails when the
test exits. To avoid this cancel the workload when opening the events
fails.

Before:
```
$ perf test -vv 7
  7: PERF_RECORD_* events & perf_sample fields:
 --- start ---
test child forked, pid 1189568
Using CPUID GenuineIntel-6-B7-1
 ------------------------------------------------------------
perf_event_attr:
  type                    	   0 (PERF_TYPE_HARDWARE)
  config                  	   0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/)
  disabled                	   1
 ------------------------------------------------------------
sys_perf_event_open: pid 0  cpu -1  group_fd -1  flags 0x8
sys_perf_event_open failed, error -13
 ------------------------------------------------------------
perf_event_attr:
  type                             0 (PERF_TYPE_HARDWARE)
  config                           0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/)
  disabled                         1
  exclude_kernel                   1
 ------------------------------------------------------------
sys_perf_event_open: pid 0  cpu -1  group_fd -1  flags 0x8 = 3
 ------------------------------------------------------------
perf_event_attr:
  type                             0 (PERF_TYPE_HARDWARE)
  config                           0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/)
  disabled                         1
 ------------------------------------------------------------
sys_perf_event_open: pid 0  cpu -1  group_fd -1  flags 0x8
sys_perf_event_open failed, error -13
 ------------------------------------------------------------
perf_event_attr:
  type                             0 (PERF_TYPE_HARDWARE)
  config                           0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/)
  disabled                         1
  exclude_kernel                   1
 ------------------------------------------------------------
sys_perf_event_open: pid 0  cpu -1  group_fd -1  flags 0x8 = 3
Attempt to add: software/cpu-clock/
..after resolving event: software/config=0/
cpu-clock -> software/cpu-clock/
 ------------------------------------------------------------
perf_event_attr:
  type                             1 (PERF_TYPE_SOFTWARE)
  size                             136
  config                           0x9 (PERF_COUNT_SW_DUMMY)
  sample_type                      IP|TID|TIME|CPU
  read_format                      ID|LOST
  disabled                         1
  inherit                          1
  mmap                             1
  comm                             1
  enable_on_exec                   1
  task                             1
  sample_id_all                    1
  mmap2                            1
  comm_exec                        1
  ksymbol                          1
  bpf_event                        1
  { wakeup_events, wakeup_watermark } 1
 ------------------------------------------------------------
sys_perf_event_open: pid 1189569  cpu 0  group_fd -1  flags 0x8
sys_perf_event_open failed, error -13
perf_evlist__open: Permission denied
 ---- end(-2) ----
Leak of file descriptor 6 that opened: 'pipe:[14200347]'
 ---- unexpected signal (6) ----
iFailed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
    #0 0x565358f6666e in child_test_sig_handler builtin-test.c:311
    #1 0x7f29ce849df0 in __restore_rt libc_sigaction.c:0
    #2 0x7f29ce89e95c in __pthread_kill_implementation pthread_kill.c:44
    #3 0x7f29ce849cc2 in raise raise.c:27
    #4 0x7f29ce8324ac in abort abort.c:81
    deepin-community#5 0x565358f662d4 in check_leaks builtin-test.c:226
    deepin-community#6 0x565358f6682e in run_test_child builtin-test.c:344
    deepin-community#7 0x565358ef7121 in start_command run-command.c:128
    deepin-community#8 0x565358f67273 in start_test builtin-test.c:545
    deepin-community#9 0x565358f6771d in __cmd_test builtin-test.c:647
    deepin-community#10 0x565358f682bd in cmd_test builtin-test.c:849
    deepin-community#11 0x565358ee5ded in run_builtin perf.c:349
    deepin-community#12 0x565358ee6085 in handle_internal_command perf.c:401
    deepin-community#13 0x565358ee61de in run_argv perf.c:448
    deepin-community#14 0x565358ee6527 in main perf.c:555
    deepin-community#15 0x7f29ce833ca8 in __libc_start_call_main libc_start_call_main.h:74
    deepin-community#16 0x7f29ce833d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128
    deepin-community#17 0x565358e391c1 in _start perf[851c1]
  7: PERF_RECORD_* events & perf_sample fields                       : FAILED!
```

After:
```
$ perf test 7
  7: PERF_RECORD_* events & perf_sample fields                       : Skip (permissions)
```

Fixes: 16d00fe ("perf tests: Move test__PERF_RECORD into separate object")
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Chun-Tse Shao <[email protected]>
Cc: Howard Chu <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
(cherry picked from commit 8e67c35a64252fed4a0af9d7125e260a8b517297)
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Oct 20, 2025
@niklas88 @opsiff
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
80f1d87 
commit 05703271c3cdcc0f2a8cf6ebdc45892b8ca83520 upstream.

Before disabling SR-IOV via config space accesses to the parent PF,
sriov_disable() first removes the PCI devices representing the VFs.

Since commit 9d16947 ("PCI: Add global pci_lock_rescan_remove()")
such removal operations are serialized against concurrent remove and
rescan using the pci_rescan_remove_lock. No such locking was ever added
in sriov_disable() however. In particular when commit 18f9e9d
("PCI/IOV: Factor out sriov_add_vfs()") factored out the PCI device
removal into sriov_del_vfs() there was still no locking around the
pci_iov_remove_virtfn() calls.

On s390 the lack of serialization in sriov_disable() may cause double
remove and list corruption with the below (amended) trace being observed:

  PSW:  0704c00180000000 0000000c914e4b38 (klist_put+56)
  GPRS: 000003800313fb48 0000000000000000 0000000100000001 0000000000000001
	00000000f9b520a8 0000000000000000 0000000000002fbd 00000000f4cc9480
	0000000000000001 0000000000000000 0000000000000000 0000000180692828
	00000000818e8000 000003800313fe2c 000003800313fb20 000003800313fad8
  #0 [3800313fb20] device_del at c9158ad5c
  #1 [3800313fb88] pci_remove_bus_device at c915105ba
  #2 [3800313fbd0] pci_iov_remove_virtfn at c9152f198
  #3 [3800313fc28] zpci_iov_remove_virtfn at c90fb67c0
  #4 [3800313fc60] zpci_bus_remove_device at c90fb6104
  deepin-community#5 [3800313fca0] __zpci_event_availability at c90fb3dca
  deepin-community#6 [3800313fd08] chsc_process_sei_nt0 at c918fe4a2
  deepin-community#7 [3800313fd60] crw_collect_info at c91905822
  deepin-community#8 [3800313fe10] kthread at c90feb390
  deepin-community#9 [3800313fe68] __ret_from_fork at c90f6aa64
  deepin-community#10 [3800313fe98] ret_from_fork at c9194f3f2.

This is because in addition to sriov_disable() removing the VFs, the
platform also generates hot-unplug events for the VFs. This being the
reverse operation to the hotplug events generated by sriov_enable() and
handled via pdev->no_vf_scan. And while the event processing takes
pci_rescan_remove_lock and checks whether the struct pci_dev still exists,
the lack of synchronization makes this checking racy.

Other races may also be possible of course though given that this lack of
locking persisted so long observable races seem very rare. Even on s390 the
list corruption was only observed with certain devices since the platform
events are only triggered by config accesses after the removal, so as long
as the removal finished synchronously they would not race. Either way the
locking is missing so fix this by adding it to the sriov_del_vfs() helper.

Just like PCI rescan-remove, locking is also missing in sriov_add_vfs()
including for the error case where pci_stop_and_remove_bus_device() is
called without the PCI rescan-remove lock being held. Even in the non-error
case, adding new PCI devices and buses should be serialized via the PCI
rescan-remove lock. Add the necessary locking.

Fixes: 18f9e9d ("PCI/IOV: Factor out sriov_add_vfs()")
Signed-off-by: Niklas Schnelle <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Benjamin Block <[email protected]>
Reviewed-by: Farhan Ali <[email protected]>
Reviewed-by: Julian Ruess <[email protected]>
Cc: [email protected]
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
(cherry picked from commit 53154cd40ccf285f1d1c24367824082061d155bd)
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Oct 20, 2025
@captain5050 @opsiff
perf test: Don't leak workload gopipe in PERF_RECORD_*
35f0865 
[ Upstream commit 48918cacefd226af44373e914e63304927c0e7dc ]

The test starts a workload and then opens events. If the events fail
to open, for example because of perf_event_paranoid, the gopipe of the
workload is leaked and the file descriptor leak check fails when the
test exits. To avoid this cancel the workload when opening the events
fails.

Before:
```
$ perf test -vv 7
  7: PERF_RECORD_* events & perf_sample fields:
 --- start ---
test child forked, pid 1189568
Using CPUID GenuineIntel-6-B7-1
 ------------------------------------------------------------
perf_event_attr:
  type                    	   0 (PERF_TYPE_HARDWARE)
  config                  	   0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/)
  disabled                	   1
 ------------------------------------------------------------
sys_perf_event_open: pid 0  cpu -1  group_fd -1  flags 0x8
sys_perf_event_open failed, error -13
 ------------------------------------------------------------
perf_event_attr:
  type                             0 (PERF_TYPE_HARDWARE)
  config                           0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/)
  disabled                         1
  exclude_kernel                   1
 ------------------------------------------------------------
sys_perf_event_open: pid 0  cpu -1  group_fd -1  flags 0x8 = 3
 ------------------------------------------------------------
perf_event_attr:
  type                             0 (PERF_TYPE_HARDWARE)
  config                           0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/)
  disabled                         1
 ------------------------------------------------------------
sys_perf_event_open: pid 0  cpu -1  group_fd -1  flags 0x8
sys_perf_event_open failed, error -13
 ------------------------------------------------------------
perf_event_attr:
  type                             0 (PERF_TYPE_HARDWARE)
  config                           0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/)
  disabled                         1
  exclude_kernel                   1
 ------------------------------------------------------------
sys_perf_event_open: pid 0  cpu -1  group_fd -1  flags 0x8 = 3
Attempt to add: software/cpu-clock/
..after resolving event: software/config=0/
cpu-clock -> software/cpu-clock/
 ------------------------------------------------------------
perf_event_attr:
  type                             1 (PERF_TYPE_SOFTWARE)
  size                             136
  config                           0x9 (PERF_COUNT_SW_DUMMY)
  sample_type                      IP|TID|TIME|CPU
  read_format                      ID|LOST
  disabled                         1
  inherit                          1
  mmap                             1
  comm                             1
  enable_on_exec                   1
  task                             1
  sample_id_all                    1
  mmap2                            1
  comm_exec                        1
  ksymbol                          1
  bpf_event                        1
  { wakeup_events, wakeup_watermark } 1
 ------------------------------------------------------------
sys_perf_event_open: pid 1189569  cpu 0  group_fd -1  flags 0x8
sys_perf_event_open failed, error -13
perf_evlist__open: Permission denied
 ---- end(-2) ----
Leak of file descriptor 6 that opened: 'pipe:[14200347]'
 ---- unexpected signal (6) ----
iFailed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
    #0 0x565358f6666e in child_test_sig_handler builtin-test.c:311
    #1 0x7f29ce849df0 in __restore_rt libc_sigaction.c:0
    #2 0x7f29ce89e95c in __pthread_kill_implementation pthread_kill.c:44
    #3 0x7f29ce849cc2 in raise raise.c:27
    #4 0x7f29ce8324ac in abort abort.c:81
    deepin-community#5 0x565358f662d4 in check_leaks builtin-test.c:226
    deepin-community#6 0x565358f6682e in run_test_child builtin-test.c:344
    deepin-community#7 0x565358ef7121 in start_command run-command.c:128
    deepin-community#8 0x565358f67273 in start_test builtin-test.c:545
    deepin-community#9 0x565358f6771d in __cmd_test builtin-test.c:647
    deepin-community#10 0x565358f682bd in cmd_test builtin-test.c:849
    deepin-community#11 0x565358ee5ded in run_builtin perf.c:349
    deepin-community#12 0x565358ee6085 in handle_internal_command perf.c:401
    deepin-community#13 0x565358ee61de in run_argv perf.c:448
    deepin-community#14 0x565358ee6527 in main perf.c:555
    deepin-community#15 0x7f29ce833ca8 in __libc_start_call_main libc_start_call_main.h:74
    deepin-community#16 0x7f29ce833d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128
    deepin-community#17 0x565358e391c1 in _start perf[851c1]
  7: PERF_RECORD_* events & perf_sample fields                       : FAILED!
```

After:
```
$ perf test 7
  7: PERF_RECORD_* events & perf_sample fields                       : Skip (permissions)
```

Fixes: 16d00fe ("perf tests: Move test__PERF_RECORD into separate object")
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Chun-Tse Shao <[email protected]>
Cc: Howard Chu <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
(cherry picked from commit 8e67c35a64252fed4a0af9d7125e260a8b517297)
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Oct 20, 2025
@niklas88 @opsiff
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
acaddd0 
commit 05703271c3cdcc0f2a8cf6ebdc45892b8ca83520 upstream.

Before disabling SR-IOV via config space accesses to the parent PF,
sriov_disable() first removes the PCI devices representing the VFs.

Since commit 9d16947 ("PCI: Add global pci_lock_rescan_remove()")
such removal operations are serialized against concurrent remove and
rescan using the pci_rescan_remove_lock. No such locking was ever added
in sriov_disable() however. In particular when commit 18f9e9d
("PCI/IOV: Factor out sriov_add_vfs()") factored out the PCI device
removal into sriov_del_vfs() there was still no locking around the
pci_iov_remove_virtfn() calls.

On s390 the lack of serialization in sriov_disable() may cause double
remove and list corruption with the below (amended) trace being observed:

  PSW:  0704c00180000000 0000000c914e4b38 (klist_put+56)
  GPRS: 000003800313fb48 0000000000000000 0000000100000001 0000000000000001
	00000000f9b520a8 0000000000000000 0000000000002fbd 00000000f4cc9480
	0000000000000001 0000000000000000 0000000000000000 0000000180692828
	00000000818e8000 000003800313fe2c 000003800313fb20 000003800313fad8
  #0 [3800313fb20] device_del at c9158ad5c
  #1 [3800313fb88] pci_remove_bus_device at c915105ba
  #2 [3800313fbd0] pci_iov_remove_virtfn at c9152f198
  #3 [3800313fc28] zpci_iov_remove_virtfn at c90fb67c0
  #4 [3800313fc60] zpci_bus_remove_device at c90fb6104
  deepin-community#5 [3800313fca0] __zpci_event_availability at c90fb3dca
  deepin-community#6 [3800313fd08] chsc_process_sei_nt0 at c918fe4a2
  deepin-community#7 [3800313fd60] crw_collect_info at c91905822
  deepin-community#8 [3800313fe10] kthread at c90feb390
  deepin-community#9 [3800313fe68] __ret_from_fork at c90f6aa64
  deepin-community#10 [3800313fe98] ret_from_fork at c9194f3f2.

This is because in addition to sriov_disable() removing the VFs, the
platform also generates hot-unplug events for the VFs. This being the
reverse operation to the hotplug events generated by sriov_enable() and
handled via pdev->no_vf_scan. And while the event processing takes
pci_rescan_remove_lock and checks whether the struct pci_dev still exists,
the lack of synchronization makes this checking racy.

Other races may also be possible of course though given that this lack of
locking persisted so long observable races seem very rare. Even on s390 the
list corruption was only observed with certain devices since the platform
events are only triggered by config accesses after the removal, so as long
as the removal finished synchronously they would not race. Either way the
locking is missing so fix this by adding it to the sriov_del_vfs() helper.

Just like PCI rescan-remove, locking is also missing in sriov_add_vfs()
including for the error case where pci_stop_and_remove_bus_device() is
called without the PCI rescan-remove lock being held. Even in the non-error
case, adding new PCI devices and buses should be serialized via the PCI
rescan-remove lock. Add the necessary locking.

Fixes: 18f9e9d ("PCI/IOV: Factor out sriov_add_vfs()")
Signed-off-by: Niklas Schnelle <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Benjamin Block <[email protected]>
Reviewed-by: Farhan Ali <[email protected]>
Reviewed-by: Julian Ruess <[email protected]>
Cc: [email protected]
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
(cherry picked from commit 53154cd40ccf285f1d1c24367824082061d155bd)
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Oct 21, 2025
@captain5050 @opsiff
perf test: Don't leak workload gopipe in PERF_RECORD_*
a7d9075 
[ Upstream commit 48918cacefd226af44373e914e63304927c0e7dc ]

The test starts a workload and then opens events. If the events fail
to open, for example because of perf_event_paranoid, the gopipe of the
workload is leaked and the file descriptor leak check fails when the
test exits. To avoid this cancel the workload when opening the events
fails.

Before:
```
$ perf test -vv 7
  7: PERF_RECORD_* events & perf_sample fields:
 --- start ---
test child forked, pid 1189568
Using CPUID GenuineIntel-6-B7-1
 ------------------------------------------------------------
perf_event_attr:
  type                    	   0 (PERF_TYPE_HARDWARE)
  config                  	   0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/)
  disabled                	   1
 ------------------------------------------------------------
sys_perf_event_open: pid 0  cpu -1  group_fd -1  flags 0x8
sys_perf_event_open failed, error -13
 ------------------------------------------------------------
perf_event_attr:
  type                             0 (PERF_TYPE_HARDWARE)
  config                           0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/)
  disabled                         1
  exclude_kernel                   1
 ------------------------------------------------------------
sys_perf_event_open: pid 0  cpu -1  group_fd -1  flags 0x8 = 3
 ------------------------------------------------------------
perf_event_attr:
  type                             0 (PERF_TYPE_HARDWARE)
  config                           0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/)
  disabled                         1
 ------------------------------------------------------------
sys_perf_event_open: pid 0  cpu -1  group_fd -1  flags 0x8
sys_perf_event_open failed, error -13
 ------------------------------------------------------------
perf_event_attr:
  type                             0 (PERF_TYPE_HARDWARE)
  config                           0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/)
  disabled                         1
  exclude_kernel                   1
 ------------------------------------------------------------
sys_perf_event_open: pid 0  cpu -1  group_fd -1  flags 0x8 = 3
Attempt to add: software/cpu-clock/
..after resolving event: software/config=0/
cpu-clock -> software/cpu-clock/
 ------------------------------------------------------------
perf_event_attr:
  type                             1 (PERF_TYPE_SOFTWARE)
  size                             136
  config                           0x9 (PERF_COUNT_SW_DUMMY)
  sample_type                      IP|TID|TIME|CPU
  read_format                      ID|LOST
  disabled                         1
  inherit                          1
  mmap                             1
  comm                             1
  enable_on_exec                   1
  task                             1
  sample_id_all                    1
  mmap2                            1
  comm_exec                        1
  ksymbol                          1
  bpf_event                        1
  { wakeup_events, wakeup_watermark } 1
 ------------------------------------------------------------
sys_perf_event_open: pid 1189569  cpu 0  group_fd -1  flags 0x8
sys_perf_event_open failed, error -13
perf_evlist__open: Permission denied
 ---- end(-2) ----
Leak of file descriptor 6 that opened: 'pipe:[14200347]'
 ---- unexpected signal (6) ----
iFailed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
    #0 0x565358f6666e in child_test_sig_handler builtin-test.c:311
    #1 0x7f29ce849df0 in __restore_rt libc_sigaction.c:0
    #2 0x7f29ce89e95c in __pthread_kill_implementation pthread_kill.c:44
    #3 0x7f29ce849cc2 in raise raise.c:27
    #4 0x7f29ce8324ac in abort abort.c:81
    deepin-community#5 0x565358f662d4 in check_leaks builtin-test.c:226
    deepin-community#6 0x565358f6682e in run_test_child builtin-test.c:344
    deepin-community#7 0x565358ef7121 in start_command run-command.c:128
    deepin-community#8 0x565358f67273 in start_test builtin-test.c:545
    deepin-community#9 0x565358f6771d in __cmd_test builtin-test.c:647
    deepin-community#10 0x565358f682bd in cmd_test builtin-test.c:849
    deepin-community#11 0x565358ee5ded in run_builtin perf.c:349
    deepin-community#12 0x565358ee6085 in handle_internal_command perf.c:401
    deepin-community#13 0x565358ee61de in run_argv perf.c:448
    deepin-community#14 0x565358ee6527 in main perf.c:555
    deepin-community#15 0x7f29ce833ca8 in __libc_start_call_main libc_start_call_main.h:74
    deepin-community#16 0x7f29ce833d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128
    deepin-community#17 0x565358e391c1 in _start perf[851c1]
  7: PERF_RECORD_* events & perf_sample fields                       : FAILED!
```

After:
```
$ perf test 7
  7: PERF_RECORD_* events & perf_sample fields                       : Skip (permissions)
```

Fixes: 16d00fe ("perf tests: Move test__PERF_RECORD into separate object")
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Chun-Tse Shao <[email protected]>
Cc: Howard Chu <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
(cherry picked from commit 4163822f8c034d5990edefd451bd76c402708326)
opsiff pushed a commit to opsiff/UOS-kernel that referenced this pull request Oct 21, 2025
@niklas88 @opsiff
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
edc04aa 
commit 05703271c3cdcc0f2a8cf6ebdc45892b8ca83520 upstream.

Before disabling SR-IOV via config space accesses to the parent PF,
sriov_disable() first removes the PCI devices representing the VFs.

Since commit 9d16947 ("PCI: Add global pci_lock_rescan_remove()")
such removal operations are serialized against concurrent remove and
rescan using the pci_rescan_remove_lock. No such locking was ever added
in sriov_disable() however. In particular when commit 18f9e9d
("PCI/IOV: Factor out sriov_add_vfs()") factored out the PCI device
removal into sriov_del_vfs() there was still no locking around the
pci_iov_remove_virtfn() calls.

On s390 the lack of serialization in sriov_disable() may cause double
remove and list corruption with the below (amended) trace being observed:

  PSW:  0704c00180000000 0000000c914e4b38 (klist_put+56)
  GPRS: 000003800313fb48 0000000000000000 0000000100000001 0000000000000001
	00000000f9b520a8 0000000000000000 0000000000002fbd 00000000f4cc9480
	0000000000000001 0000000000000000 0000000000000000 0000000180692828
	00000000818e8000 000003800313fe2c 000003800313fb20 000003800313fad8
  #0 [3800313fb20] device_del at c9158ad5c
  #1 [3800313fb88] pci_remove_bus_device at c915105ba
  #2 [3800313fbd0] pci_iov_remove_virtfn at c9152f198
  #3 [3800313fc28] zpci_iov_remove_virtfn at c90fb67c0
  #4 [3800313fc60] zpci_bus_remove_device at c90fb6104
  deepin-community#5 [3800313fca0] __zpci_event_availability at c90fb3dca
  deepin-community#6 [3800313fd08] chsc_process_sei_nt0 at c918fe4a2
  deepin-community#7 [3800313fd60] crw_collect_info at c91905822
  deepin-community#8 [3800313fe10] kthread at c90feb390
  deepin-community#9 [3800313fe68] __ret_from_fork at c90f6aa64
  deepin-community#10 [3800313fe98] ret_from_fork at c9194f3f2.

This is because in addition to sriov_disable() removing the VFs, the
platform also generates hot-unplug events for the VFs. This being the
reverse operation to the hotplug events generated by sriov_enable() and
handled via pdev->no_vf_scan. And while the event processing takes
pci_rescan_remove_lock and checks whether the struct pci_dev still exists,
the lack of synchronization makes this checking racy.

Other races may also be possible of course though given that this lack of
locking persisted so long observable races seem very rare. Even on s390 the
list corruption was only observed with certain devices since the platform
events are only triggered by config accesses after the removal, so as long
as the removal finished synchronously they would not race. Either way the
locking is missing so fix this by adding it to the sriov_del_vfs() helper.

Just like PCI rescan-remove, locking is also missing in sriov_add_vfs()
including for the error case where pci_stop_and_remove_bus_device() is
called without the PCI rescan-remove lock being held. Even in the non-error
case, adding new PCI devices and buses should be serialized via the PCI
rescan-remove lock. Add the necessary locking.

Fixes: 18f9e9d ("PCI/IOV: Factor out sriov_add_vfs()")
Signed-off-by: Niklas Schnelle <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Benjamin Block <[email protected]>
Reviewed-by: Farhan Ali <[email protected]>
Reviewed-by: Julian Ruess <[email protected]>
Cc: [email protected]
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
(cherry picked from commit 36039348bca77828bf06eae41b8f76e38cd15847)
opsiff pushed a commit that referenced this pull request Oct 21, 2025
@captain5050 @opsiff
perf test: Don't leak workload gopipe in PERF_RECORD_*
d171f63 
[ Upstream commit 48918cacefd226af44373e914e63304927c0e7dc ]

The test starts a workload and then opens events. If the events fail
to open, for example because of perf_event_paranoid, the gopipe of the
workload is leaked and the file descriptor leak check fails when the
test exits. To avoid this cancel the workload when opening the events
fails.

Before:
```
$ perf test -vv 7
  7: PERF_RECORD_* events & perf_sample fields:
 --- start ---
test child forked, pid 1189568
Using CPUID GenuineIntel-6-B7-1
 ------------------------------------------------------------
perf_event_attr:
  type                    	   0 (PERF_TYPE_HARDWARE)
  config                  	   0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/)
  disabled                	   1
 ------------------------------------------------------------
sys_perf_event_open: pid 0  cpu -1  group_fd -1  flags 0x8
sys_perf_event_open failed, error -13
 ------------------------------------------------------------
perf_event_attr:
  type                             0 (PERF_TYPE_HARDWARE)
  config                           0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/)
  disabled                         1
  exclude_kernel                   1
 ------------------------------------------------------------
sys_perf_event_open: pid 0  cpu -1  group_fd -1  flags 0x8 = 3
 ------------------------------------------------------------
perf_event_attr:
  type                             0 (PERF_TYPE_HARDWARE)
  config                           0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/)
  disabled                         1
 ------------------------------------------------------------
sys_perf_event_open: pid 0  cpu -1  group_fd -1  flags 0x8
sys_perf_event_open failed, error -13
 ------------------------------------------------------------
perf_event_attr:
  type                             0 (PERF_TYPE_HARDWARE)
  config                           0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/)
  disabled                         1
  exclude_kernel                   1
 ------------------------------------------------------------
sys_perf_event_open: pid 0  cpu -1  group_fd -1  flags 0x8 = 3
Attempt to add: software/cpu-clock/
..after resolving event: software/config=0/
cpu-clock -> software/cpu-clock/
 ------------------------------------------------------------
perf_event_attr:
  type                             1 (PERF_TYPE_SOFTWARE)
  size                             136
  config                           0x9 (PERF_COUNT_SW_DUMMY)
  sample_type                      IP|TID|TIME|CPU
  read_format                      ID|LOST
  disabled                         1
  inherit                          1
  mmap                             1
  comm                             1
  enable_on_exec                   1
  task                             1
  sample_id_all                    1
  mmap2                            1
  comm_exec                        1
  ksymbol                          1
  bpf_event                        1
  { wakeup_events, wakeup_watermark } 1
 ------------------------------------------------------------
sys_perf_event_open: pid 1189569  cpu 0  group_fd -1  flags 0x8
sys_perf_event_open failed, error -13
perf_evlist__open: Permission denied
 ---- end(-2) ----
Leak of file descriptor 6 that opened: 'pipe:[14200347]'
 ---- unexpected signal (6) ----
iFailed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
    #0 0x565358f6666e in child_test_sig_handler builtin-test.c:311
    #1 0x7f29ce849df0 in __restore_rt libc_sigaction.c:0
    #2 0x7f29ce89e95c in __pthread_kill_implementation pthread_kill.c:44
    #3 0x7f29ce849cc2 in raise raise.c:27
    #4 0x7f29ce8324ac in abort abort.c:81
    #5 0x565358f662d4 in check_leaks builtin-test.c:226
    #6 0x565358f6682e in run_test_child builtin-test.c:344
    #7 0x565358ef7121 in start_command run-command.c:128
    #8 0x565358f67273 in start_test builtin-test.c:545
    #9 0x565358f6771d in __cmd_test builtin-test.c:647
    #10 0x565358f682bd in cmd_test builtin-test.c:849
    #11 0x565358ee5ded in run_builtin perf.c:349
    #12 0x565358ee6085 in handle_internal_command perf.c:401
    #13 0x565358ee61de in run_argv perf.c:448
    #14 0x565358ee6527 in main perf.c:555
    #15 0x7f29ce833ca8 in __libc_start_call_main libc_start_call_main.h:74
    #16 0x7f29ce833d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128
    #17 0x565358e391c1 in _start perf[851c1]
  7: PERF_RECORD_* events & perf_sample fields                       : FAILED!
```

After:
```
$ perf test 7
  7: PERF_RECORD_* events & perf_sample fields                       : Skip (permissions)
```

Fixes: 16d00fe ("perf tests: Move test__PERF_RECORD into separate object")
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Athira Rajeev <[email protected]>
Cc: Chun-Tse Shao <[email protected]>
Cc: Howard Chu <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
(cherry picked from commit 4163822f8c034d5990edefd451bd76c402708326)
opsiff pushed a commit that referenced this pull request Oct 21, 2025
@niklas88 @opsiff
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
6cf1531 
commit 05703271c3cdcc0f2a8cf6ebdc45892b8ca83520 upstream.

Before disabling SR-IOV via config space accesses to the parent PF,
sriov_disable() first removes the PCI devices representing the VFs.

Since commit 9d16947 ("PCI: Add global pci_lock_rescan_remove()")
such removal operations are serialized against concurrent remove and
rescan using the pci_rescan_remove_lock. No such locking was ever added
in sriov_disable() however. In particular when commit 18f9e9d
("PCI/IOV: Factor out sriov_add_vfs()") factored out the PCI device
removal into sriov_del_vfs() there was still no locking around the
pci_iov_remove_virtfn() calls.

On s390 the lack of serialization in sriov_disable() may cause double
remove and list corruption with the below (amended) trace being observed:

  PSW:  0704c00180000000 0000000c914e4b38 (klist_put+56)
  GPRS: 000003800313fb48 0000000000000000 0000000100000001 0000000000000001
	00000000f9b520a8 0000000000000000 0000000000002fbd 00000000f4cc9480
	0000000000000001 0000000000000000 0000000000000000 0000000180692828
	00000000818e8000 000003800313fe2c 000003800313fb20 000003800313fad8
  #0 [3800313fb20] device_del at c9158ad5c
  #1 [3800313fb88] pci_remove_bus_device at c915105ba
  #2 [3800313fbd0] pci_iov_remove_virtfn at c9152f198
  #3 [3800313fc28] zpci_iov_remove_virtfn at c90fb67c0
  #4 [3800313fc60] zpci_bus_remove_device at c90fb6104
  #5 [3800313fca0] __zpci_event_availability at c90fb3dca
  #6 [3800313fd08] chsc_process_sei_nt0 at c918fe4a2
  #7 [3800313fd60] crw_collect_info at c91905822
  #8 [3800313fe10] kthread at c90feb390
  #9 [3800313fe68] __ret_from_fork at c90f6aa64
  #10 [3800313fe98] ret_from_fork at c9194f3f2.

This is because in addition to sriov_disable() removing the VFs, the
platform also generates hot-unplug events for the VFs. This being the
reverse operation to the hotplug events generated by sriov_enable() and
handled via pdev->no_vf_scan. And while the event processing takes
pci_rescan_remove_lock and checks whether the struct pci_dev still exists,
the lack of synchronization makes this checking racy.

Other races may also be possible of course though given that this lack of
locking persisted so long observable races seem very rare. Even on s390 the
list corruption was only observed with certain devices since the platform
events are only triggered by config accesses after the removal, so as long
as the removal finished synchronously they would not race. Either way the
locking is missing so fix this by adding it to the sriov_del_vfs() helper.

Just like PCI rescan-remove, locking is also missing in sriov_add_vfs()
including for the error case where pci_stop_and_remove_bus_device() is
called without the PCI rescan-remove lock being held. Even in the non-error
case, adding new PCI devices and buses should be serialized via the PCI
rescan-remove lock. Add the necessary locking.

Fixes: 18f9e9d ("PCI/IOV: Factor out sriov_add_vfs()")
Signed-off-by: Niklas Schnelle <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Benjamin Block <[email protected]>
Reviewed-by: Farhan Ali <[email protected]>
Reviewed-by: Julian Ruess <[email protected]>
Cc: [email protected]
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
(cherry picked from commit 36039348bca77828bf06eae41b8f76e38cd15847)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Reviewers

@zccrs zccrs zccrs approved these changes

Assignees

No one assigned

Labels

None yet

Projects

None yet

Milestone

No milestone

Development

Successfully merging this pull request may close these issues.

2 participants

@huangbibo @zccrs