tty: vt: use _IO() to define ioctl numbers

_IO*() is the proper way of defining ioctl numbers. All these vt numbers
were synthetically built up the same way the _IO() macro does.

So instead of implicit hex numbers, use _IO() properly.

To not change the pre-existing numbers, use only _IO() (and not _IOR()
or _IOW()). The latter would change the numbers indeed.

Objdump of vt_ioctl.o reveals no difference with this patch.

Again, VT_GETCONSIZECSRPOS already uses _IOR(), so everything is paved
for this patch.

Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]>
Cc: Nicolas Pitre <[email protected]>
Reviewed-by: Nicolas Pitre <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Author: Jiri Slaby (SUSE)

include/uapi/linux/vt.h

@@ -14,9 +14,9 @@
 		/* Note: the ioctl VT_GETSTATE does not work for
 		   consoles 16 and higher (since it returns a short) */
 
-/* 0x56 is 'V', to avoid collision with termios and kd */
+/* 'V' to avoid collision with termios and kd */
 
-#define VT_OPENQRY	0x5600	/* find available vt */
+#define VT_OPENQRY		_IO('V', 0x00)	/* find available vt */
 
 struct vt_mode {
 	__u8 mode;		/* vt mode */
@@ -25,8 +25,8 @@ struct vt_mode {
 	__s16 acqsig;		/* signal to raise on acquisition */
 	__s16 frsig;		/* unused (set to 0) */
 };
-#define VT_GETMODE	0x5601	/* get mode of active vt */
-#define VT_SETMODE	0x5602	/* set mode of active vt */
+#define VT_GETMODE		_IO('V', 0x01)	/* get mode of active vt */
+#define VT_SETMODE		_IO('V', 0x02)	/* set mode of active vt */
 #define		VT_AUTO		0x00	/* auto vt switching */
 #define		VT_PROCESS	0x01	/* process controls switching */
 #define		VT_ACKACQ	0x02	/* acknowledge switch */
@@ -36,21 +36,21 @@ struct vt_stat {
 	__u16 v_signal;	/* signal to send */
 	__u16 v_state;		/* vt bitmask */
 };
-#define VT_GETSTATE	0x5603	/* get global vt state info */
-#define VT_SENDSIG	0x5604	/* signal to send to bitmask of vts */
+#define VT_GETSTATE		_IO('V', 0x03)	/* get global vt state info */
+#define VT_SENDSIG		_IO('V', 0x04)	/* signal to send to bitmask of vts */
 
-#define VT_RELDISP	0x5605	/* release display */
+#define VT_RELDISP		_IO('V', 0x05)	/* release display */
 
-#define VT_ACTIVATE	0x5606	/* make vt active */
-#define VT_WAITACTIVE	0x5607	/* wait for vt active */
-#define VT_DISALLOCATE	0x5608  /* free memory associated to vt */
+#define VT_ACTIVATE		_IO('V', 0x06)	/* make vt active */
+#define VT_WAITACTIVE		_IO('V', 0x07)	/* wait for vt active */
+#define VT_DISALLOCATE		_IO('V', 0x08)  /* free memory associated to vt */
 
 struct vt_sizes {
 	__u16 v_rows;		/* number of rows */
 	__u16 v_cols;		/* number of columns */
 	__u16 v_scrollsize;	/* number of lines of scrollback */
 };
-#define VT_RESIZE	0x5609	/* set kernel's idea of screensize */
+#define VT_RESIZE		_IO('V', 0x09)	/* set kernel's idea of screensize */
 
 struct vt_consize {
 	__u16 v_rows;	/* number of rows */
@@ -60,10 +60,10 @@ struct vt_consize {
 	__u16 v_vcol;	/* number of pixel columns on screen */
 	__u16 v_ccol;	/* number of pixel columns per character */
 };
-#define VT_RESIZEX      0x560A  /* set kernel's idea of screensize + more */
-#define VT_LOCKSWITCH   0x560B  /* disallow vt switching */
-#define VT_UNLOCKSWITCH 0x560C  /* allow vt switching */
-#define VT_GETHIFONTMASK 0x560D  /* return hi font mask */
+#define VT_RESIZEX		_IO('V', 0x0A)  /* set kernel's idea of screensize + more */
+#define VT_LOCKSWITCH		_IO('V', 0x0B)  /* disallow vt switching */
+#define VT_UNLOCKSWITCH		_IO('V', 0x0C)  /* allow vt switching */
+#define VT_GETHIFONTMASK	_IO('V', 0x0D)  /* return hi font mask */
 
 struct vt_event {
 	__u32 event;
@@ -77,14 +77,14 @@ struct vt_event {
 	__u32 pad[4];		/* Padding for expansion */
 };
 
-#define VT_WAITEVENT	0x560E	/* Wait for an event */
+#define VT_WAITEVENT		_IO('V', 0x0E)	/* Wait for an event */
 
 struct vt_setactivate {
 	__u32 console;
 	struct vt_mode mode;
 };
 
-#define VT_SETACTIVATE	0x560F	/* Activate and set the mode of a console */
+#define VT_SETACTIVATE		_IO('V', 0x0F)	/* Activate and set the mode of a console */
 
 /* get console size and cursor position */
 struct vt_consizecsrpos {