Merge tag 'net-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Happy Wear a Dress Day.

  Fairly standard-sized batch of fixes, accounting for the lack of
  sub-tree submissions this week. The mlx5 IRQ fixes are notable, people
  were complaining about that. No fires burning.

  Current release - regressions:

   - eth: mlx5e:
      - multiple fixes for dynamic IRQ allocation
      - prevent encap offload when neigh update is running

   - eth: mana: fix perf regression: remove rx_cqes, tx_cqes counters

  Current release - new code bugs:

   - eth: mlx5e: DR, add missing mutex init/destroy in pattern manager

  Previous releases - always broken:

   - tcp: deny tcp_disconnect() when threads are waiting

   - sched: prevent ingress Qdiscs from getting installed in random
     locations in the hierarchy and moving around

   - sched: flower: fix possible OOB write in fl_set_geneve_opt()

   - netlink: fix NETLINK_LIST_MEMBERSHIPS length report

   - udp6: fix race condition in udp6_sendmsg & connect

   - tcp: fix mishandling when the sack compression is deferred

   - rtnetlink: validate link attributes set at creation time

   - mptcp: fix connect timeout handling

   - eth: stmmac: fix call trace when stmmac_xdp_xmit() is invoked

   - eth: amd-xgbe: fix the false linkup in xgbe_phy_status

   - eth: mlx5e:
      - fix corner cases in internal buffer configuration
      - drain health before unregistering devlink

   - usb: qmi_wwan: set DTR quirk for BroadMobi BM818

  Misc:

   - tcp: return user_mss for TCP_MAXSEG in CLOSE/LISTEN state if
     user_mss set"

* tag 'net-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits)
  mptcp: fix active subflow finalization
  mptcp: add annotations around sk->sk_shutdown accesses
  mptcp: fix data race around msk->first access
  mptcp: consolidate passive msk socket initialization
  mptcp: add annotations around msk->subflow accesses
  mptcp: fix connect timeout handling
  rtnetlink: add the missing IFLA_GRO_ tb check in validate_linkmsg
  rtnetlink: move IFLA_GSO_ tb check to validate_linkmsg
  rtnetlink: call validate_linkmsg in rtnl_create_link
  ice: recycle/free all of the fragments from multi-buffer frame
  net: phy: mxl-gpy: extend interrupt fix to all impacted variants
  net: renesas: rswitch: Fix return value in error path of xmit
  net: dsa: mv88e6xxx: Increase wait after reset deactivation
  net: ipa: Use correct value for IPA_STATUS_SIZE
  tcp: fix mishandling when the sack compression is deferred.
  net/sched: flower: fix possible OOB write in fl_set_geneve_opt()
  sfc: fix error unwinds in TC offload
  net/mlx5: Read embedded cpu after init bit cleared
  net/mlx5e: Fix error handling in mlx5e_refresh_tirs
  net/mlx5: Ensure af_desc.mask is properly initialized
  ...

Author: torvalds

Documentation/netlink/specs/ethtool.yaml

@@ -60,22 +60,6 @@ attribute-sets:
         type: nest
         nested-attributes: bitset-bits
 
-  -
-    name: u64-array
-    attributes:
-      -
-        name: u64
-        type: nest
-        multi-attr: true
-        nested-attributes: u64
-  -
-    name: s32-array
-    attributes:
-      -
-        name: s32
-        type: nest
-        multi-attr: true
-        nested-attributes: s32
   -
     name: string
     attributes:
@@ -705,16 +689,16 @@ attribute-sets:
         type: u8
       -
         name: corrected
-        type: nest
-        nested-attributes: u64-array
+        type: binary
+        sub-type: u64
       -
         name: uncorr
-        type: nest
-        nested-attributes: u64-array
+        type: binary
+        sub-type: u64
       -
         name: corr-bits
-        type: nest
-        nested-attributes: u64-array
+        type: binary
+        sub-type: u64
   -
     name: fec
     attributes:
@@ -827,8 +811,8 @@ attribute-sets:
         type: u32
       -
         name: index
-        type: nest
-        nested-attributes: s32-array
+        type: binary
+        sub-type: s32
   -
     name: module
     attributes:

Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst

@@ -40,6 +40,7 @@ flow_steering_mode: Device flow steering mode
 ---------------------------------------------
 The flow steering mode parameter controls the flow steering mode of the driver.
 Two modes are supported:
+
 1. 'dmfs' - Device managed flow steering.
 2. 'smfs' - Software/Driver managed flow steering.
 
@@ -99,6 +100,7 @@ between representors and stacked devices.
 By default metadata is enabled on the supported devices in E-switch.
 Metadata is applicable only for E-switch in switchdev mode and
 users may disable it when NONE of the below use cases will be in use:
+
 1. HCA is in Dual/multi-port RoCE mode.
 2. VF/SF representor bonding (Usually used for Live migration)
 3. Stacked devices
@@ -180,7 +182,8 @@ User commands examples:
 
     $ devlink health diagnose pci/0000:82:00.0 reporter tx
 
-NOTE: This command has valid output only when interface is up, otherwise the command has empty output.
+.. note::
+   This command has valid output only when interface is up, otherwise the command has empty output.
 
 - Show number of tx errors indicated, number of recover flows ended successfully,
   is autorecover enabled and graceful period from last recover::
@@ -232,8 +235,9 @@ User commands examples:
 
     $ devlink health dump show pci/0000:82:00.0 reporter fw
 
-NOTE: This command can run only on the PF which has fw tracer ownership,
-running it on other PF or any VF will return "Operation not permitted".
+.. note::
+   This command can run only on the PF which has fw tracer ownership,
+   running it on other PF or any VF will return "Operation not permitted".
 
 fw fatal reporter
 -----------------
@@ -256,7 +260,8 @@ User commands examples:
 
     $ devlink health dump show pci/0000:82:00.1 reporter fw_fatal
 
-NOTE: This command can run only on PF.
+.. note::
+   This command can run only on PF.
 
 vnic reporter
 -------------
@@ -265,28 +270,37 @@ It is responsible for querying the vnic diagnostic counters from fw and displayi
 them in realtime.
 
 Description of the vnic counters:
-total_q_under_processor_handle: number of queues in an error state due to
-an async error or errored command.
-send_queue_priority_update_flow: number of QP/SQ priority/SL update
-events.
-cq_overrun: number of times CQ entered an error state due to an
-overflow.
-async_eq_overrun: number of times an EQ mapped to async events was
-overrun.
-comp_eq_overrun: number of times an EQ mapped to completion events was
-overrun.
-quota_exceeded_command: number of commands issued and failed due to quota
-exceeded.
-invalid_command: number of commands issued and failed dues to any reason
-other than quota exceeded.
-nic_receive_steering_discard: number of packets that completed RX flow
-steering but were discarded due to a mismatch in flow table.
+
+- total_q_under_processor_handle
+        number of queues in an error state due to
+        an async error or errored command.
+- send_queue_priority_update_flow
+        number of QP/SQ priority/SL update events.
+- cq_overrun
+        number of times CQ entered an error state due to an overflow.
+- async_eq_overrun
+        number of times an EQ mapped to async events was overrun.
+        comp_eq_overrun number of times an EQ mapped to completion events was
+        overrun.
+- quota_exceeded_command
+        number of commands issued and failed due to quota exceeded.
+- invalid_command
+        number of commands issued and failed dues to any reason other than quota
+        exceeded.
+- nic_receive_steering_discard
+        number of packets that completed RX flow
+        steering but were discarded due to a mismatch in flow table.
 
 User commands examples:
-- Diagnose PF/VF vnic counters
+
+- Diagnose PF/VF vnic counters::
+
         $ devlink health diagnose pci/0000:82:00.1 reporter vnic
+
 - Diagnose representor vnic counters (performed by supplying devlink port of the
-  representor, which can be obtained via devlink port command)
+  representor, which can be obtained via devlink port command)::
+
         $ devlink health diagnose pci/0000:82:00.1/65537 reporter vnic
 
-NOTE: This command can run over all interfaces such as PF/VF and representor ports.
+.. note::
+   This command can run over all interfaces such as PF/VF and representor ports.

drivers/net/dsa/mv88e6xxx/chip.c

@@ -7170,7 +7170,7 @@ static int mv88e6xxx_probe(struct mdio_device *mdiodev)
 		goto out;
 	}
 	if (chip->reset)
-		usleep_range(1000, 2000);
+		usleep_range(10000, 20000);
 
 	/* Detect if the device is configured in single chip addressing mode,
 	 * otherwise continue with address specific smi init/detection.

drivers/net/ethernet/amd/xgbe/xgbe-mdio.c

@@ -1329,7 +1329,7 @@ static enum xgbe_mode xgbe_phy_status_aneg(struct xgbe_prv_data *pdata)
 	return pdata->phy_if.phy_impl.an_outcome(pdata);
 }
 
-static void xgbe_phy_status_result(struct xgbe_prv_data *pdata)
+static bool xgbe_phy_status_result(struct xgbe_prv_data *pdata)
 {
 	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
 	enum xgbe_mode mode;
@@ -1367,8 +1367,13 @@ static void xgbe_phy_status_result(struct xgbe_prv_data *pdata)
 
 	pdata->phy.duplex = DUPLEX_FULL;
 
-	if (xgbe_set_mode(pdata, mode) && pdata->an_again)
+	if (!xgbe_set_mode(pdata, mode))
+		return false;
+
+	if (pdata->an_again)
 		xgbe_phy_reconfig_aneg(pdata);
+
+	return true;
 }
 
 static void xgbe_phy_status(struct xgbe_prv_data *pdata)
@@ -1398,7 +1403,8 @@ static void xgbe_phy_status(struct xgbe_prv_data *pdata)
 			return;
 		}
 
-		xgbe_phy_status_result(pdata);
+		if (xgbe_phy_status_result(pdata))
+			return;
 
 		if (test_bit(XGBE_LINK_INIT, &pdata->dev_state))
 			clear_bit(XGBE_LINK_INIT, &pdata->dev_state);

drivers/net/ethernet/intel/ice/ice_txrx.c

@@ -1152,11 +1152,11 @@ int ice_clean_rx_irq(struct ice_rx_ring *rx_ring, int budget)
 	unsigned int total_rx_bytes = 0, total_rx_pkts = 0;
 	unsigned int offset = rx_ring->rx_offset;
 	struct xdp_buff *xdp = &rx_ring->xdp;
+	u32 cached_ntc = rx_ring->first_desc;
 	struct ice_tx_ring *xdp_ring = NULL;
 	struct bpf_prog *xdp_prog = NULL;
 	u32 ntc = rx_ring->next_to_clean;
 	u32 cnt = rx_ring->count;
-	u32 cached_ntc = ntc;
 	u32 xdp_xmit = 0;
 	u32 cached_ntu;
 	bool failure;

drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c

@@ -490,7 +490,7 @@ static void poll_trace(struct mlx5_fw_tracer *tracer,
 				(u64)timestamp_low;
 		break;
 	default:
-		if (tracer_event->event_id >= tracer->str_db.first_string_trace ||
+		if (tracer_event->event_id >= tracer->str_db.first_string_trace &&
 		    tracer_event->event_id <= tracer->str_db.first_string_trace +
 					      tracer->str_db.num_string_trace) {
 			tracer_event->type = TRACER_EVENT_TYPE_STRING;

drivers/net/ethernet/mellanox/mlx5/core/en.h

@@ -327,6 +327,7 @@ struct mlx5e_params {
 	unsigned int sw_mtu;
 	int hard_mtu;
 	bool ptp_rx;
+	__be32 terminate_lkey_be;
 };
 
 static inline u8 mlx5e_get_dcb_num_tc(struct mlx5e_params *params)

drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c

@@ -51,7 +51,7 @@ int mlx5e_port_query_buffer(struct mlx5e_priv *priv,
 	if (err)
 		goto out;
 
-	for (i = 0; i < MLX5E_MAX_BUFFER; i++) {
+	for (i = 0; i < MLX5E_MAX_NETWORK_BUFFER; i++) {
 		buffer = MLX5_ADDR_OF(pbmc_reg, out, buffer[i]);
 		port_buffer->buffer[i].lossy =
 			MLX5_GET(bufferx_reg, buffer, lossy);
@@ -73,14 +73,24 @@ int mlx5e_port_query_buffer(struct mlx5e_priv *priv,
 			  port_buffer->buffer[i].lossy);
 	}
 
-	port_buffer->headroom_size = total_used;
+	port_buffer->internal_buffers_size = 0;
+	for (i = MLX5E_MAX_NETWORK_BUFFER; i < MLX5E_TOTAL_BUFFERS; i++) {
+		buffer = MLX5_ADDR_OF(pbmc_reg, out, buffer[i]);
+		port_buffer->internal_buffers_size +=
+			MLX5_GET(bufferx_reg, buffer, size) * port_buff_cell_sz;
+	}
+
 	port_buffer->port_buffer_size =
 		MLX5_GET(pbmc_reg, out, port_buffer_size) * port_buff_cell_sz;
-	port_buffer->spare_buffer_size =
-		port_buffer->port_buffer_size - total_used;
-
-	mlx5e_dbg(HW, priv, "total buffer size=%d, spare buffer size=%d\n",
-		  port_buffer->port_buffer_size,
+	port_buffer->headroom_size = total_used;
+	port_buffer->spare_buffer_size = port_buffer->port_buffer_size -
+					 port_buffer->internal_buffers_size -
+					 port_buffer->headroom_size;
+
+	mlx5e_dbg(HW, priv,
+		  "total buffer size=%u, headroom buffer size=%u, internal buffers size=%u, spare buffer size=%u\n",
+		  port_buffer->port_buffer_size, port_buffer->headroom_size,
+		  port_buffer->internal_buffers_size,
 		  port_buffer->spare_buffer_size);
 out:
 	kfree(out);
@@ -206,11 +216,11 @@ static int port_update_pool_cfg(struct mlx5_core_dev *mdev,
 	if (!MLX5_CAP_GEN(mdev, sbcam_reg))
 		return 0;
 
-	for (i = 0; i < MLX5E_MAX_BUFFER; i++)
+	for (i = 0; i < MLX5E_MAX_NETWORK_BUFFER; i++)
 		lossless_buff_count += ((port_buffer->buffer[i].size) &&
 				       (!(port_buffer->buffer[i].lossy)));
 
-	for (i = 0; i < MLX5E_MAX_BUFFER; i++) {
+	for (i = 0; i < MLX5E_MAX_NETWORK_BUFFER; i++) {
 		p = select_sbcm_params(&port_buffer->buffer[i], lossless_buff_count);
 		err = mlx5e_port_set_sbcm(mdev, 0, i,
 					  MLX5_INGRESS_DIR,
@@ -293,7 +303,7 @@ static int port_set_buffer(struct mlx5e_priv *priv,
 	if (err)
 		goto out;
 
-	for (i = 0; i < MLX5E_MAX_BUFFER; i++) {
+	for (i = 0; i < MLX5E_MAX_NETWORK_BUFFER; i++) {
 		void *buffer = MLX5_ADDR_OF(pbmc_reg, in, buffer[i]);
 		u64 size = port_buffer->buffer[i].size;
 		u64 xoff = port_buffer->buffer[i].xoff;
@@ -351,7 +361,7 @@ static int update_xoff_threshold(struct mlx5e_port_buffer *port_buffer,
 {
 	int i;
 
-	for (i = 0; i < MLX5E_MAX_BUFFER; i++) {
+	for (i = 0; i < MLX5E_MAX_NETWORK_BUFFER; i++) {
 		if (port_buffer->buffer[i].lossy) {
 			port_buffer->buffer[i].xoff = 0;
 			port_buffer->buffer[i].xon  = 0;
@@ -408,7 +418,7 @@ static int update_buffer_lossy(struct mlx5_core_dev *mdev,
 	int err;
 	int i;
 
-	for (i = 0; i < MLX5E_MAX_BUFFER; i++) {
+	for (i = 0; i < MLX5E_MAX_NETWORK_BUFFER; i++) {
 		prio_count = 0;
 		lossy_count = 0;
 
@@ -432,11 +442,11 @@ static int update_buffer_lossy(struct mlx5_core_dev *mdev,
 	}
 
 	if (changed) {
-		err = port_update_pool_cfg(mdev, port_buffer);
+		err = update_xoff_threshold(port_buffer, xoff, max_mtu, port_buff_cell_sz);
 		if (err)
 			return err;
 
-		err = update_xoff_threshold(port_buffer, xoff, max_mtu, port_buff_cell_sz);
+		err = port_update_pool_cfg(mdev, port_buffer);
 		if (err)
 			return err;
 
@@ -515,7 +525,7 @@ int mlx5e_port_manual_buffer_config(struct mlx5e_priv *priv,
 
 	if (change & MLX5E_PORT_BUFFER_PRIO2BUFFER) {
 		update_prio2buffer = true;
-		for (i = 0; i < MLX5E_MAX_BUFFER; i++)
+		for (i = 0; i < MLX5E_MAX_NETWORK_BUFFER; i++)
 			mlx5e_dbg(HW, priv, "%s: requested to map prio[%d] to buffer %d\n",
 				  __func__, i, prio2buffer[i]);
 
@@ -530,7 +540,7 @@ int mlx5e_port_manual_buffer_config(struct mlx5e_priv *priv,
 	}
 
 	if (change & MLX5E_PORT_BUFFER_SIZE) {
-		for (i = 0; i < MLX5E_MAX_BUFFER; i++) {
+		for (i = 0; i < MLX5E_MAX_NETWORK_BUFFER; i++) {
 			mlx5e_dbg(HW, priv, "%s: buffer[%d]=%d\n", __func__, i, buffer_size[i]);
 			if (!port_buffer.buffer[i].lossy && !buffer_size[i]) {
 				mlx5e_dbg(HW, priv, "%s: lossless buffer[%d] size cannot be zero\n",
@@ -544,7 +554,9 @@ int mlx5e_port_manual_buffer_config(struct mlx5e_priv *priv,
 
 		mlx5e_dbg(HW, priv, "%s: total buffer requested=%d\n", __func__, total_used);
 
-		if (total_used > port_buffer.port_buffer_size)
+		if (total_used > port_buffer.headroom_size &&
+		    (total_used - port_buffer.headroom_size) >
+			    port_buffer.spare_buffer_size)
 			return -EINVAL;
 
 		update_buffer = true;

drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.h

@@ -35,7 +35,8 @@
 #include "en.h"
 #include "port.h"
 
-#define MLX5E_MAX_BUFFER 8
+#define MLX5E_MAX_NETWORK_BUFFER 8
+#define MLX5E_TOTAL_BUFFERS 10
 #define MLX5E_DEFAULT_CABLE_LEN 7 /* 7 meters */
 
 #define MLX5_BUFFER_SUPPORTED(mdev) (MLX5_CAP_GEN(mdev, pcam_reg) && \
@@ -60,8 +61,9 @@ struct mlx5e_bufferx_reg {
 struct mlx5e_port_buffer {
 	u32                       port_buffer_size;
 	u32                       spare_buffer_size;
-	u32                       headroom_size;
-	struct mlx5e_bufferx_reg  buffer[MLX5E_MAX_BUFFER];
+	u32                       headroom_size;	  /* Buffers 0-7 */
+	u32                       internal_buffers_size;  /* Buffers 8-9 */
+	struct mlx5e_bufferx_reg  buffer[MLX5E_MAX_NETWORK_BUFFER];
 };
 
 int mlx5e_port_manual_buffer_config(struct mlx5e_priv *priv,