perf bpf-filter: Enable events manually

On s390, and, in general, on all platforms where the respective event
supports auxiliary data gathering, the command:

   # ./perf record -u 0 -aB --synth=no -- ./perf test -w thloop
   [ perf record: Woken up 1 times to write data ]
   [ perf record: Captured and wrote 0.011 MB perf.data ]
   # ./perf report --stats | grep SAMPLE
   #

does not generate samples in the perf.data file. On x86 the command:

  # sudo perf record -e intel_pt// -u 0 ls

is broken too.

Looking at the sequence of calls in 'perf record' reveals this
behavior:

1. The event 'cycles' is created and enabled:

   record__open()
   +-> evlist__apply_filters()
       +-> perf_bpf_filter__prepare()
	   +-> bpf_program.attach_perf_event()
	       +-> bpf_program.attach_perf_event_opts()
	           +-> __GI___ioctl(..., PERF_EVENT_IOC_ENABLE, ...)

   The event 'cycles' is enabled and active now. However the event's
   ring-buffer to store the samples generated by hardware is not
   allocated yet.

2. The event's fd is mmap()ed to create the ring buffer:

   record__open()
   +-> record__mmap()
       +-> record__mmap_evlist()
	   +-> evlist__mmap_ex()
	       +-> perf_evlist__mmap_ops()
	           +-> mmap_per_cpu()
	               +-> mmap_per_evsel()
	                   +-> mmap__mmap()
	                       +-> perf_mmap__mmap()
	                           +-> mmap()

   This allocates the ring buffer for the event 'cycles'. With mmap()
   the kernel creates the ring buffer:

   perf_mmap(): kernel function to create the event's ring
   |            buffer to save the sampled data.
   |
   +-> ring_buffer_attach(): Allocates memory for ring buffer.
       |        The PMU has auxiliary data setup function. The
       |        has_aux(event) condition is true and the PMU's
       |        stop() is called to stop sampling. It is not
       |        restarted:
       |
       |        if (has_aux(event))
       |                perf_event_stop(event, 0);
       |
       +-> cpumsf_pmu_stop():

   Hardware sampling is stopped. No samples are generated and saved
   anymore.

3. After the event 'cycles' has been mapped, the event is enabled a
   second time in:

   __cmd_record()
   +-> evlist__enable()
       +-> __evlist__enable()
	   +-> evsel__enable_cpu()
	       +-> perf_evsel__enable_cpu()
	           +-> perf_evsel__run_ioctl()
	               +-> perf_evsel__ioctl()
	                   +-> __GI___ioctl(., PERF_EVENT_IOC_ENABLE, .)

   The second

      ioctl(fd, PERF_EVENT_IOC_ENABLE, 0);

   is just a NOP in this case. The first invocation in (1.) sets the
   event::state to PERF_EVENT_STATE_ACTIVE. The kernel functions

   perf_ioctl()
   +-> _perf_ioctl()
       +-> _perf_event_enable()
           +-> __perf_event_enable()

   return immediately because event::state is already set to
   PERF_EVENT_STATE_ACTIVE.

This happens on s390, because the event 'cycles' offers the possibility
to save auxilary data. The PMU callbacks setup_aux() and free_aux() are
defined. Without both callback functions, cpumsf_pmu_stop() is not
invoked and sampling continues.

To remedy this, remove the first invocation of

   ioctl(..., PERF_EVENT_IOC_ENABLE, ...).

in step (1.) Create the event in step (1.) and enable it in step (3.)
after the ring buffer has been mapped.

Output after:

 # ./perf record -aB --synth=no -u 0 -- ./perf test -w thloop 2
 [ perf record: Woken up 3 times to write data ]
 [ perf record: Captured and wrote 0.876 MB perf.data ]
 # ./perf  report --stats | grep SAMPLE
              SAMPLE events:      16200  (99.5%)
              SAMPLE events:      16200
 #

The software event succeeded both before and after the patch:

 # ./perf record -e cpu-clock -aB --synth=no -u 0 -- \
					  ./perf test -w thloop 2
 [ perf record: Woken up 7 times to write data ]
 [ perf record: Captured and wrote 2.870 MB perf.data ]
 # ./perf  report --stats | grep SAMPLE
              SAMPLE events:      53506  (99.8%)
              SAMPLE events:      53506
 #

Fixes: b4c658d ("perf target: Remove uid from target")
Suggested-by: Jiri Olsa <[email protected]>
Tested-by: Thomas Richter <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Co-developed-by: Thomas Richter <[email protected]>
Signed-off-by: Thomas Richter <[email protected]>
Signed-off-by: Ilya Leoshkevich <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>

Author: iii-i

tools/perf/util/bpf-filter.c

@@ -451,6 +451,8 @@ int perf_bpf_filter__prepare(struct evsel *evsel, struct target *target)
 	struct bpf_link *link;
 	struct perf_bpf_filter_entry *entry;
 	bool needs_idx_hash = !target__has_cpu(target);
+	DECLARE_LIBBPF_OPTS(bpf_perf_event_opts, pe_opts,
+			    .dont_enable = true);
 
 	entry = calloc(MAX_FILTERS, sizeof(*entry));
 	if (entry == NULL)
@@ -522,7 +524,8 @@ int perf_bpf_filter__prepare(struct evsel *evsel, struct target *target)
 	prog = skel->progs.perf_sample_filter;
 	for (x = 0; x < xyarray__max_x(evsel->core.fd); x++) {
 		for (y = 0; y < xyarray__max_y(evsel->core.fd); y++) {
-			link = bpf_program__attach_perf_event(prog, FD(evsel, x, y));
+			link = bpf_program__attach_perf_event_opts(prog, FD(evsel, x, y),
+								   &pe_opts);
 			if (IS_ERR(link)) {
 				pr_err("Failed to attach perf sample-filter program\n");
 				ret = PTR_ERR(link);