[CAN]: Add PF_CAN core module

This patch adds the CAN core functionality but no protocols or drivers.
No protocol implementations are included here.  They come as separate
patches.  Protocol numbers are already in include/linux/can.h.

Signed-off-by: Oliver Hartkopp <[email protected]>
Signed-off-by: Urs Thuermann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Author: Oliver Hartkopp

include/linux/can.h

@@ -0,0 +1,111 @@
+/*
+ * linux/can.h
+ *
+ * Definitions for CAN network layer (socket addr / CAN frame / CAN filter)
+ *
+ * Authors: Oliver Hartkopp <[email protected]>
+ *          Urs Thuermann   <[email protected]>
+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ * Send feedback to <[email protected]>
+ *
+ */
+
+#ifndef CAN_H
+#define CAN_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/* controller area network (CAN) kernel definitions */
+
+/* special address description flags for the CAN_ID */
+#define CAN_EFF_FLAG 0x80000000U /* EFF/SFF is set in the MSB */
+#define CAN_RTR_FLAG 0x40000000U /* remote transmission request */
+#define CAN_ERR_FLAG 0x20000000U /* error frame */
+
+/* valid bits in CAN ID for frame formats */
+#define CAN_SFF_MASK 0x000007FFU /* standard frame format (SFF) */
+#define CAN_EFF_MASK 0x1FFFFFFFU /* extended frame format (EFF) */
+#define CAN_ERR_MASK 0x1FFFFFFFU /* omit EFF, RTR, ERR flags */
+
+/*
+ * Controller Area Network Identifier structure
+ *
+ * bit 0-28	: CAN identifier (11/29 bit)
+ * bit 29	: error frame flag (0 = data frame, 1 = error frame)
+ * bit 30	: remote transmission request flag (1 = rtr frame)
+ * bit 31	: frame format flag (0 = standard 11 bit, 1 = extended 29 bit)
+ */
+typedef __u32 canid_t;
+
+/*
+ * Controller Area Network Error Frame Mask structure
+ *
+ * bit 0-28	: error class mask (see include/linux/can/error.h)
+ * bit 29-31	: set to zero
+ */
+typedef __u32 can_err_mask_t;
+
+/**
+ * struct can_frame - basic CAN frame structure
+ * @can_id:  the CAN ID of the frame and CAN_*_FLAG flags, see above.
+ * @can_dlc: the data length field of the CAN frame
+ * @data:    the CAN frame payload.
+ */
+struct can_frame {
+	canid_t can_id;  /* 32 bit CAN_ID + EFF/RTR/ERR flags */
+	__u8    can_dlc; /* data length code: 0 .. 8 */
+	__u8    data[8] __attribute__((aligned(8)));
+};
+
+/* particular protocols of the protocol family PF_CAN */
+#define CAN_RAW		1 /* RAW sockets */
+#define CAN_BCM		2 /* Broadcast Manager */
+#define CAN_TP16	3 /* VAG Transport Protocol v1.6 */
+#define CAN_TP20	4 /* VAG Transport Protocol v2.0 */
+#define CAN_MCNET	5 /* Bosch MCNet */
+#define CAN_ISOTP	6 /* ISO 15765-2 Transport Protocol */
+#define CAN_NPROTO	7
+
+#define SOL_CAN_BASE 100
+
+/**
+ * struct sockaddr_can - the sockaddr structure for CAN sockets
+ * @can_family:  address family number AF_CAN.
+ * @can_ifindex: CAN network interface index.
+ * @can_addr:    protocol specific address information
+ */
+struct sockaddr_can {
+	sa_family_t can_family;
+	int         can_ifindex;
+	union {
+		/* transport protocol class address information (e.g. ISOTP) */
+		struct { canid_t rx_id, tx_id; } tp;
+
+		/* reserved for future CAN protocols address information */
+	} can_addr;
+};
+
+/**
+ * struct can_filter - CAN ID based filter in can_register().
+ * @can_id:   relevant bits of CAN ID which are not masked out.
+ * @can_mask: CAN mask (see description)
+ *
+ * Description:
+ * A filter matches, when
+ *
+ *          <received_can_id> & mask == can_id & mask
+ *
+ * The filter can be inverted (CAN_INV_FILTER bit set in can_id) or it can
+ * filter for error frames (CAN_ERR_FLAG bit set in mask).
+ */
+struct can_filter {
+	canid_t can_id;
+	canid_t can_mask;
+};
+
+#define CAN_INV_FILTER 0x20000000U /* to be set in can_filter.can_id */
+
+#endif /* CAN_H */

include/linux/can/core.h

@@ -0,0 +1,64 @@
+/*
+ * linux/can/core.h
+ *
+ * Protoypes and definitions for CAN protocol modules using the PF_CAN core
+ *
+ * Authors: Oliver Hartkopp <[email protected]>
+ *          Urs Thuermann   <[email protected]>
+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ * Send feedback to <[email protected]>
+ *
+ */
+
+#ifndef CAN_CORE_H
+#define CAN_CORE_H
+
+#include <linux/can.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+
+#define CAN_VERSION "20071116"
+
+/* increment this number each time you change some user-space interface */
+#define CAN_ABI_VERSION "8"
+
+#define CAN_VERSION_STRING "rev " CAN_VERSION " abi " CAN_ABI_VERSION
+
+#define DNAME(dev) ((dev) ? (dev)->name : "any")
+
+/**
+ * struct can_proto - CAN protocol structure
+ * @type:       type argument in socket() syscall, e.g. SOCK_DGRAM.
+ * @protocol:   protocol number in socket() syscall.
+ * @capability: capability needed to open the socket, or -1 for no restriction.
+ * @ops:        pointer to struct proto_ops for sock->ops.
+ * @prot:       pointer to struct proto structure.
+ */
+struct can_proto {
+	int              type;
+	int              protocol;
+	int              capability;
+	struct proto_ops *ops;
+	struct proto     *prot;
+};
+
+/* function prototypes for the CAN networklayer core (af_can.c) */
+
+extern int  can_proto_register(struct can_proto *cp);
+extern void can_proto_unregister(struct can_proto *cp);
+
+extern int  can_rx_register(struct net_device *dev, canid_t can_id,
+			    canid_t mask,
+			    void (*func)(struct sk_buff *, void *),
+			    void *data, char *ident);
+
+extern void can_rx_unregister(struct net_device *dev, canid_t can_id,
+			      canid_t mask,
+			      void (*func)(struct sk_buff *, void *),
+			      void *data);
+
+extern int can_send(struct sk_buff *skb, int loop);
+
+#endif /* CAN_CORE_H */

include/linux/can/error.h

@@ -0,0 +1,93 @@
+/*
+ * linux/can/error.h
+ *
+ * Definitions of the CAN error frame to be filtered and passed to the user.
+ *
+ * Author: Oliver Hartkopp <[email protected]>
+ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ * Send feedback to <[email protected]>
+ *
+ */
+
+#ifndef CAN_ERROR_H
+#define CAN_ERROR_H
+
+#define CAN_ERR_DLC 8 /* dlc for error frames */
+
+/* error class (mask) in can_id */
+#define CAN_ERR_TX_TIMEOUT   0x00000001U /* TX timeout (by netdevice driver) */
+#define CAN_ERR_LOSTARB      0x00000002U /* lost arbitration    / data[0]    */
+#define CAN_ERR_CRTL         0x00000004U /* controller problems / data[1]    */
+#define CAN_ERR_PROT         0x00000008U /* protocol violations / data[2..3] */
+#define CAN_ERR_TRX          0x00000010U /* transceiver status  / data[4]    */
+#define CAN_ERR_ACK          0x00000020U /* received no ACK on transmission */
+#define CAN_ERR_BUSOFF       0x00000040U /* bus off */
+#define CAN_ERR_BUSERROR     0x00000080U /* bus error (may flood!) */
+#define CAN_ERR_RESTARTED    0x00000100U /* controller restarted */
+
+/* arbitration lost in bit ... / data[0] */
+#define CAN_ERR_LOSTARB_UNSPEC   0x00 /* unspecified */
+				      /* else bit number in bitstream */
+
+/* error status of CAN-controller / data[1] */
+#define CAN_ERR_CRTL_UNSPEC      0x00 /* unspecified */
+#define CAN_ERR_CRTL_RX_OVERFLOW 0x01 /* RX buffer overflow */
+#define CAN_ERR_CRTL_TX_OVERFLOW 0x02 /* TX buffer overflow */
+#define CAN_ERR_CRTL_RX_WARNING  0x04 /* reached warning level for RX errors */
+#define CAN_ERR_CRTL_TX_WARNING  0x08 /* reached warning level for TX errors */
+#define CAN_ERR_CRTL_RX_PASSIVE  0x10 /* reached error passive status RX */
+#define CAN_ERR_CRTL_TX_PASSIVE  0x20 /* reached error passive status TX */
+				      /* (at least one error counter exceeds */
+				      /* the protocol-defined level of 127)  */
+
+/* error in CAN protocol (type) / data[2] */
+#define CAN_ERR_PROT_UNSPEC      0x00 /* unspecified */
+#define CAN_ERR_PROT_BIT         0x01 /* single bit error */
+#define CAN_ERR_PROT_FORM        0x02 /* frame format error */
+#define CAN_ERR_PROT_STUFF       0x04 /* bit stuffing error */
+#define CAN_ERR_PROT_BIT0        0x08 /* unable to send dominant bit */
+#define CAN_ERR_PROT_BIT1        0x10 /* unable to send recessive bit */
+#define CAN_ERR_PROT_OVERLOAD    0x20 /* bus overload */
+#define CAN_ERR_PROT_ACTIVE      0x40 /* active error announcement */
+#define CAN_ERR_PROT_TX          0x80 /* error occured on transmission */
+
+/* error in CAN protocol (location) / data[3] */
+#define CAN_ERR_PROT_LOC_UNSPEC  0x00 /* unspecified */
+#define CAN_ERR_PROT_LOC_SOF     0x03 /* start of frame */
+#define CAN_ERR_PROT_LOC_ID28_21 0x02 /* ID bits 28 - 21 (SFF: 10 - 3) */
+#define CAN_ERR_PROT_LOC_ID20_18 0x06 /* ID bits 20 - 18 (SFF: 2 - 0 )*/
+#define CAN_ERR_PROT_LOC_SRTR    0x04 /* substitute RTR (SFF: RTR) */
+#define CAN_ERR_PROT_LOC_IDE     0x05 /* identifier extension */
+#define CAN_ERR_PROT_LOC_ID17_13 0x07 /* ID bits 17-13 */
+#define CAN_ERR_PROT_LOC_ID12_05 0x0F /* ID bits 12-5 */
+#define CAN_ERR_PROT_LOC_ID04_00 0x0E /* ID bits 4-0 */
+#define CAN_ERR_PROT_LOC_RTR     0x0C /* RTR */
+#define CAN_ERR_PROT_LOC_RES1    0x0D /* reserved bit 1 */
+#define CAN_ERR_PROT_LOC_RES0    0x09 /* reserved bit 0 */
+#define CAN_ERR_PROT_LOC_DLC     0x0B /* data length code */
+#define CAN_ERR_PROT_LOC_DATA    0x0A /* data section */
+#define CAN_ERR_PROT_LOC_CRC_SEQ 0x08 /* CRC sequence */
+#define CAN_ERR_PROT_LOC_CRC_DEL 0x18 /* CRC delimiter */
+#define CAN_ERR_PROT_LOC_ACK     0x19 /* ACK slot */
+#define CAN_ERR_PROT_LOC_ACK_DEL 0x1B /* ACK delimiter */
+#define CAN_ERR_PROT_LOC_EOF     0x1A /* end of frame */
+#define CAN_ERR_PROT_LOC_INTERM  0x12 /* intermission */
+
+/* error status of CAN-transceiver / data[4] */
+/*                                             CANH CANL */
+#define CAN_ERR_TRX_UNSPEC             0x00 /* 0000 0000 */
+#define CAN_ERR_TRX_CANH_NO_WIRE       0x04 /* 0000 0100 */
+#define CAN_ERR_TRX_CANH_SHORT_TO_BAT  0x05 /* 0000 0101 */
+#define CAN_ERR_TRX_CANH_SHORT_TO_VCC  0x06 /* 0000 0110 */
+#define CAN_ERR_TRX_CANH_SHORT_TO_GND  0x07 /* 0000 0111 */
+#define CAN_ERR_TRX_CANL_NO_WIRE       0x40 /* 0100 0000 */
+#define CAN_ERR_TRX_CANL_SHORT_TO_BAT  0x50 /* 0101 0000 */
+#define CAN_ERR_TRX_CANL_SHORT_TO_VCC  0x60 /* 0110 0000 */
+#define CAN_ERR_TRX_CANL_SHORT_TO_GND  0x70 /* 0111 0000 */
+#define CAN_ERR_TRX_CANL_SHORT_TO_CANH 0x80 /* 1000 0000 */
+
+/* controller specific additional information / data[5..7] */
+
+#endif /* CAN_ERROR_H */

net/Kconfig

@@ -218,6 +218,7 @@ endmenu
 endmenu
 
 source "net/ax25/Kconfig"
+source "net/can/Kconfig"
 source "net/irda/Kconfig"
 source "net/bluetooth/Kconfig"
 source "net/rxrpc/Kconfig"

net/Makefile

@@ -34,6 +34,7 @@ obj-$(CONFIG_LAPB)		+= lapb/
 obj-$(CONFIG_NETROM)		+= netrom/
 obj-$(CONFIG_ROSE)		+= rose/
 obj-$(CONFIG_AX25)		+= ax25/
+obj-$(CONFIG_CAN)		+= can/
 obj-$(CONFIG_IRDA)		+= irda/
 obj-$(CONFIG_BT)		+= bluetooth/
 obj-$(CONFIG_SUNRPC)		+= sunrpc/

net/can/Kconfig

@@ -0,0 +1,17 @@
+#
+# Controller Area Network (CAN) network layer core configuration
+#
+
+menuconfig CAN
+	depends on NET
+	tristate "CAN bus subsystem support"
+	---help---
+	  Controller Area Network (CAN) is a slow (up to 1Mbit/s) serial
+	  communications protocol which was developed by Bosch in
+	  1991, mainly for automotive, but now widely used in marine
+	  (NMEA2000), industrial, and medical applications.
+	  More information on the CAN network protocol family PF_CAN
+	  is contained in <Documentation/networking/can.txt>.
+
+	  If you want CAN support you should say Y here and also to the
+	  specific driver for your controller(s) below.

net/can/Makefile

@@ -0,0 +1,6 @@
+#
+#  Makefile for the Linux Controller Area Network core.
+#
+
+obj-$(CONFIG_CAN)	+= can.o
+can-objs		:= af_can.o proc.o