change reset pin for portenta c33 to 0

Author: fabik111

README.md

@@ -35,6 +35,7 @@ The procedure:
 * `Arduino GIGA R1 WiFi`: short the pin 7 to GND until the led turns off
 * `Arduino Nano RP2040 Connect`: short the pin 2 to 3.3V until the led turns off
 * `Arduino Portenta H7`: short the pin 0 to GND until the led turns off
+* `Arduino Portenta C33`: short the pin 0 to GND until the led turns off
 * Other boards: short the pin 2 to GND until the led turns off
 * `Portenta Machine Control`: currently the reset procedure is not available
 

examples/NetworkConfiguratorDemo/NetworkConfiguratorDemo.ino

@@ -22,6 +22,7 @@
  * - Arduino GIGA R1 WiFi: short the pin 7 to GND until the led turns off
  * - Arduino Nano RP2040 Connect: short the pin 2 to 3.3V until the led turns off
  * - Portenta H7: short the pin 0 to GND until the led turns off
+ * - Portenta C33: short the pin 0 to GND until the led turns off
  * - Portenta Machine Control: the reset is not available
  * - Other boards: short the pin 2 to GND until the led turns off
  *

src/ANetworkConfigurator_Config.h

@@ -110,7 +110,7 @@
 #if defined(ARDUINO_PORTENTA_C33)
   #define NETWORK_CONFIGURATOR_COMPATIBLE 1
   #define ZERO_TOUCH_ENABLED 1
-  #define PIN_RECONFIGURE 2
+  #define PIN_RECONFIGURE 0
   #define LED_RECONFIGURE LEDG
   #define BOARD_HAS_RGB
   #define GREEN_LED LEDG

src/Arduino_NetworkConfigurator.cpp

@@ -123,6 +123,7 @@ NetworkConfiguratorStates NetworkConfiguratorClass::update() {
    * - Arduino GIGA R1 WiFi: short the pin 7 to GND until the led turns off
    * - Arduino Nano RP2040 Connect: short the pin 2 to 3.3V until the led turns off
    * - Portenta H7: short the pin 0 to GND until the led turns off
+   * - Portenta C33: short the pin 0 to GND until the led turns off
    * - Portenta Machine Control: the reset is not available
    * - Other boards: short the pin 2 to GND until the led turns off
    */

src/Arduino_NetworkConfigurator.h

@@ -59,6 +59,7 @@ enum class NetworkConfiguratorStates { ZERO_TOUCH_CONFIG,
  * - Arduino GIGA R1 WiFi: short the pin 7 to GND until the led turns off
  * - Arduino Nano RP2040 Connect: short the pin 2 to 3.3V until the led turns off
  * - Portenta H7: short the pin 0 to GND until the led turns off
+ * - Portenta C33: short the pin 0 to GND until the led turns off
  * - Portenta Machine Control: the reset is not available
  * - Other boards: short the pin 2 to GND until the led turns off
  *