Merge tag 'usb-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of USB driver fixes for 5.7-rc3.

  Nothing huge, just the usual collection of:

   - xhci fixes

   - gadget driver fixes

   - syzkaller fuzzing fixes

   - new device ids and DT bindings

   - new quirks added for broken devices

  A few of the gadget driver fixes show up twice here as they were
  applied to my branch, and also by Felipe to his branch which I then
  pulled in as we got out of sync a bit.

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
  USB: sisusbvga: Change port variable from signed to unsigned
  usb-storage: Add unusual_devs entry for JMicron JMS566
  USB: hub: Revert commit bd0e6c9 ("usb: hub: try old enumeration scheme first for high speed devices")
  USB: hub: Fix handling of connect changes during sleep
  usb: typec: altmode: Fix typec_altmode_get_partner sometimes returning an invalid pointer
  xhci: Don't clear hub TT buffer on ep0 protocol stall
  xhci: prevent bus suspend if a roothub port detected a over-current condition
  xhci: Fix handling halted endpoint even if endpoint ring appears empty
  usb: raw-gadget: Fix copy_to/from_user() checks
  usb: raw-gadget: fix raw_event_queue_fetch locking
  usb: gadget: udc: atmel: Fix vbus disconnect handling
  usb: dwc3: gadget: Fix request completion check
  USB: Add USB_QUIRK_DELAY_CTRL_MSG and USB_QUIRK_DELAY_INIT for Corsair K70 RGB RAPIDFIRE
  phy: tegra: Select USB_COMMON for usb_get_maximum_speed()
  usb: typec: tcpm: Ignore CC and vbus changes in PORT_RESET change
  usb: f_fs: Clear OS Extended descriptor counts to zero in ffs_data_reset()
  cdc-acm: introduce a cool down
  cdc-acm: close race betrween suspend() and acm_softint
  UAS: fix deadlock in error handling and PM flushing work
  UAS: no use logging any details in case of ENODEV
  ...

Author: torvalds

Documentation/admin-guide/kernel-parameters.txt

@@ -5187,8 +5187,7 @@
 
 	usbcore.old_scheme_first=
 			[USB] Start with the old device initialization
-			scheme,  applies only to low and full-speed devices
-			 (default 0 = off).
+			scheme (default 0 = off).
 
 	usbcore.usbfs_memory_mb=
 			[USB] Memory limit (in MB) for buffers allocated by

Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml

@@ -18,6 +18,7 @@ properties:
           - renesas,r8a774c0-usb3-peri # RZ/G2E
           - renesas,r8a7795-usb3-peri  # R-Car H3
           - renesas,r8a7796-usb3-peri  # R-Car M3-W
+          - renesas,r8a77961-usb3-peri # R-Car M3-W+
           - renesas,r8a77965-usb3-peri # R-Car M3-N
           - renesas,r8a77990-usb3-peri # R-Car E3
       - const: renesas,rcar-gen3-usb3-peri

Documentation/devicetree/bindings/usb/renesas,usbhs.yaml

@@ -40,6 +40,7 @@ properties:
               - renesas,usbhs-r8a774c0 # RZ/G2E
               - renesas,usbhs-r8a7795  # R-Car H3
               - renesas,usbhs-r8a7796  # R-Car M3-W
+              - renesas,usbhs-r8a77961 # R-Car M3-W+
               - renesas,usbhs-r8a77965 # R-Car M3-N
               - renesas,usbhs-r8a77990 # R-Car E3
               - renesas,usbhs-r8a77995 # R-Car D3

Documentation/devicetree/bindings/usb/usb-xhci.txt

@@ -16,7 +16,8 @@ Required properties:
     - "renesas,xhci-r8a7791" for r8a7791 SoC
     - "renesas,xhci-r8a7793" for r8a7793 SoC
     - "renesas,xhci-r8a7795" for r8a7795 SoC
-    - "renesas,xhci-r8a7796" for r8a7796 SoC
+    - "renesas,xhci-r8a7796" for r8a77960 SoC
+    - "renesas,xhci-r8a77961" for r8a77961 SoC
     - "renesas,xhci-r8a77965" for r8a77965 SoC
     - "renesas,xhci-r8a77990" for r8a77990 SoC
     - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible

drivers/phy/tegra/Kconfig

@@ -1,7 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config PHY_TEGRA_XUSB
 	tristate "NVIDIA Tegra XUSB pad controller driver"
-	depends on ARCH_TEGRA
+	depends on ARCH_TEGRA && USB_SUPPORT
+	select USB_COMMON
 	select USB_CONN_GPIO
 	select USB_PHY
 	help

drivers/usb/class/cdc-acm.c

@@ -412,9 +412,12 @@ static void acm_ctrl_irq(struct urb *urb)
 
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
-	if (retval && retval != -EPERM)
+	if (retval && retval != -EPERM && retval != -ENODEV)
 		dev_err(&acm->control->dev,
 			"%s - usb_submit_urb failed: %d\n", __func__, retval);
+	else
+		dev_vdbg(&acm->control->dev,
+			"control resubmission terminated %d\n", retval);
 }
 
 static int acm_submit_read_urb(struct acm *acm, int index, gfp_t mem_flags)
@@ -430,6 +433,8 @@ static int acm_submit_read_urb(struct acm *acm, int index, gfp_t mem_flags)
 			dev_err(&acm->data->dev,
 				"urb %d failed submission with %d\n",
 				index, res);
+		} else {
+			dev_vdbg(&acm->data->dev, "intended failure %d\n", res);
 		}
 		set_bit(index, &acm->read_urbs_free);
 		return res;
@@ -471,6 +476,7 @@ static void acm_read_bulk_callback(struct urb *urb)
 	int status = urb->status;
 	bool stopped = false;
 	bool stalled = false;
+	bool cooldown = false;
 
 	dev_vdbg(&acm->data->dev, "got urb %d, len %d, status %d\n",
 		rb->index, urb->actual_length, status);
@@ -497,6 +503,14 @@ static void acm_read_bulk_callback(struct urb *urb)
 			__func__, status);
 		stopped = true;
 		break;
+	case -EOVERFLOW:
+	case -EPROTO:
+		dev_dbg(&acm->data->dev,
+			"%s - cooling babbling device\n", __func__);
+		usb_mark_last_busy(acm->dev);
+		set_bit(rb->index, &acm->urbs_in_error_delay);
+		cooldown = true;
+		break;
 	default:
 		dev_dbg(&acm->data->dev,
 			"%s - nonzero urb status received: %d\n",
@@ -518,9 +532,11 @@ static void acm_read_bulk_callback(struct urb *urb)
 	 */
 	smp_mb__after_atomic();
 
-	if (stopped || stalled) {
+	if (stopped || stalled || cooldown) {
 		if (stalled)
 			schedule_work(&acm->work);
+		else if (cooldown)
+			schedule_delayed_work(&acm->dwork, HZ / 2);
 		return;
 	}
 
@@ -557,14 +573,20 @@ static void acm_softint(struct work_struct *work)
 	struct acm *acm = container_of(work, struct acm, work);
 
 	if (test_bit(EVENT_RX_STALL, &acm->flags)) {
-		if (!(usb_autopm_get_interface(acm->data))) {
+		smp_mb(); /* against acm_suspend() */
+		if (!acm->susp_count) {
 			for (i = 0; i < acm->rx_buflimit; i++)
 				usb_kill_urb(acm->read_urbs[i]);
 			usb_clear_halt(acm->dev, acm->in);
 			acm_submit_read_urbs(acm, GFP_KERNEL);
-			usb_autopm_put_interface(acm->data);
+			clear_bit(EVENT_RX_STALL, &acm->flags);
 		}
-		clear_bit(EVENT_RX_STALL, &acm->flags);
+	}
+
+	if (test_and_clear_bit(ACM_ERROR_DELAY, &acm->flags)) {
+		for (i = 0; i < ACM_NR; i++) 
+			if (test_and_clear_bit(i, &acm->urbs_in_error_delay))
+					acm_submit_read_urb(acm, i, GFP_NOIO);
 	}
 
 	if (test_and_clear_bit(EVENT_TTY_WAKEUP, &acm->flags))
@@ -1333,6 +1355,7 @@ static int acm_probe(struct usb_interface *intf,
 	acm->readsize = readsize;
 	acm->rx_buflimit = num_rx_buf;
 	INIT_WORK(&acm->work, acm_softint);
+	INIT_DELAYED_WORK(&acm->dwork, acm_softint);
 	init_waitqueue_head(&acm->wioctl);
 	spin_lock_init(&acm->write_lock);
 	spin_lock_init(&acm->read_lock);
@@ -1542,6 +1565,7 @@ static void acm_disconnect(struct usb_interface *intf)
 
 	acm_kill_urbs(acm);
 	cancel_work_sync(&acm->work);
+	cancel_delayed_work_sync(&acm->dwork);
 
 	tty_unregister_device(acm_tty_driver, acm->minor);
 
@@ -1584,6 +1608,8 @@ static int acm_suspend(struct usb_interface *intf, pm_message_t message)
 
 	acm_kill_urbs(acm);
 	cancel_work_sync(&acm->work);
+	cancel_delayed_work_sync(&acm->dwork);
+	acm->urbs_in_error_delay = 0;
 
 	return 0;
 }

drivers/usb/class/cdc-acm.h

@@ -109,8 +109,11 @@ struct acm {
 #		define EVENT_TTY_WAKEUP	0
 #		define EVENT_RX_STALL	1
 #		define ACM_THROTTLED	2
+#		define ACM_ERROR_DELAY	3
+	unsigned long urbs_in_error_delay;		/* these need to be restarted after a delay */
 	struct usb_cdc_line_coding line;		/* bits, stop, parity */
-	struct work_struct work;			/* work queue entry for line discipline waking up */
+	struct work_struct work;			/* work queue entry for various purposes*/
+	struct delayed_work dwork;			/* for cool downs needed in error recovery */
 	unsigned int ctrlin;				/* input control lines (DCD, DSR, RI, break, overruns) */
 	unsigned int ctrlout;				/* output control lines (DTR, RTS) */
 	struct async_icount iocount;			/* counters for control line changes */

drivers/usb/core/hub.c

@@ -1223,6 +1223,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 #ifdef CONFIG_PM
 			udev->reset_resume = 1;
 #endif
+			/* Don't set the change_bits when the device
+			 * was powered off.
+			 */
+			if (test_bit(port1, hub->power_bits))
+				set_bit(port1, hub->change_bits);
 
 		} else {
 			/* The power session is gone; tell hub_wq */
@@ -2723,13 +2728,11 @@ static bool use_new_scheme(struct usb_device *udev, int retry,
 {
 	int old_scheme_first_port =
 		port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME;
-	int quick_enumeration = (udev->speed == USB_SPEED_HIGH);
 
 	if (udev->speed >= USB_SPEED_SUPER)
 		return false;
 
-	return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first
-			      || quick_enumeration);
+	return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first);
 }
 
 /* Is a USB 3.0 port in the Inactive or Compliance Mode state?
@@ -3088,6 +3091,15 @@ static int check_port_resume_type(struct usb_device *udev,
 		if (portchange & USB_PORT_STAT_C_ENABLE)
 			usb_clear_port_feature(hub->hdev, port1,
 					USB_PORT_FEAT_C_ENABLE);
+
+		/*
+		 * Whatever made this reset-resume necessary may have
+		 * turned on the port1 bit in hub->change_bits.  But after
+		 * a successful reset-resume we want the bit to be clear;
+		 * if it was on it would indicate that something happened
+		 * following the reset-resume.
+		 */
+		clear_bit(port1, hub->change_bits);
 	}
 
 	return status;

drivers/usb/core/message.c

@@ -589,12 +589,13 @@ void usb_sg_cancel(struct usb_sg_request *io)
 	int i, retval;
 
 	spin_lock_irqsave(&io->lock, flags);
-	if (io->status) {
+	if (io->status || io->count == 0) {
 		spin_unlock_irqrestore(&io->lock, flags);
 		return;
 	}
 	/* shut everything down */
 	io->status = -ECONNRESET;
+	io->count++;		/* Keep the request alive until we're done */
 	spin_unlock_irqrestore(&io->lock, flags);
 
 	for (i = io->entries - 1; i >= 0; --i) {
@@ -608,6 +609,12 @@ void usb_sg_cancel(struct usb_sg_request *io)
 			dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
 				 __func__, retval);
 	}
+
+	spin_lock_irqsave(&io->lock, flags);
+	io->count--;
+	if (!io->count)
+		complete(&io->complete);
+	spin_unlock_irqrestore(&io->lock, flags);
 }
 EXPORT_SYMBOL_GPL(usb_sg_cancel);
 

drivers/usb/core/quirks.c

@@ -430,6 +430,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Corsair K70 LUX */
 	{ USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT },
 
+	/* Corsair K70 RGB RAPDIFIRE */
+	{ USB_DEVICE(0x1b1c, 0x1b38), .driver_info = USB_QUIRK_DELAY_INIT |
+	  USB_QUIRK_DELAY_CTRL_MSG },
+
 	/* MIDI keyboard WORLDE MINI */
 	{ USB_DEVICE(0x1c75, 0x0204), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },