clk: sunxi-ng: d1: Add CAN bus gates and resets

The D1 CCU contains gates and resets for two CAN buses. While the CAN
bus controllers are only documented for the T113 SoC, the CCU is the
same across all SoC variants.

Signed-off-by: Fabien Poussin <[email protected]>
Reviewed-by: Andre Przywara <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
Acked-by: Jernej Skrabec <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jernej Skrabec <[email protected]>

Author: fpoussin

drivers/clk/sunxi-ng/ccu-sun20i-d1.c

@@ -469,6 +469,11 @@ static SUNXI_CCU_GATE_HWS(bus_i2c2_clk, "bus-i2c2", apb1_hws,
 static SUNXI_CCU_GATE_HWS(bus_i2c3_clk, "bus-i2c3", apb1_hws,
 			  0x91c, BIT(3), 0);
 
+static SUNXI_CCU_GATE_HWS(bus_can0_clk, "bus-can0", apb1_hws,
+			  0x92c, BIT(0), 0);
+static SUNXI_CCU_GATE_HWS(bus_can1_clk, "bus-can1", apb1_hws,
+			  0x92c, BIT(1), 0);
+
 static const struct clk_parent_data spi_parents[] = {
 	{ .fw_name = "hosc" },
 	{ .hw = &pll_periph0_clk.hw },
@@ -997,6 +1002,8 @@ static struct ccu_common *sun20i_d1_ccu_clks[] = {
 	&bus_i2c1_clk.common,
 	&bus_i2c2_clk.common,
 	&bus_i2c3_clk.common,
+	&bus_can0_clk.common,
+	&bus_can1_clk.common,
 	&spi0_clk.common,
 	&spi1_clk.common,
 	&bus_spi0_clk.common,
@@ -1147,6 +1154,8 @@ static struct clk_hw_onecell_data sun20i_d1_hw_clks = {
 		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
 		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
 		[CLK_BUS_I2C3]		= &bus_i2c3_clk.common.hw,
+		[CLK_BUS_CAN0]		= &bus_can0_clk.common.hw,
+		[CLK_BUS_CAN1]		= &bus_can1_clk.common.hw,
 		[CLK_SPI0]		= &spi0_clk.common.hw,
 		[CLK_SPI1]		= &spi1_clk.common.hw,
 		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
@@ -1252,6 +1261,8 @@ static struct ccu_reset_map sun20i_d1_ccu_resets[] = {
 	[RST_BUS_I2C1]		= { 0x91c, BIT(17) },
 	[RST_BUS_I2C2]		= { 0x91c, BIT(18) },
 	[RST_BUS_I2C3]		= { 0x91c, BIT(19) },
+	[RST_BUS_CAN0]		= { 0x92c, BIT(16) },
+	[RST_BUS_CAN1]		= { 0x92c, BIT(17) },
 	[RST_BUS_SPI0]		= { 0x96c, BIT(16) },
 	[RST_BUS_SPI1]		= { 0x96c, BIT(17) },
 	[RST_BUS_EMAC]		= { 0x97c, BIT(16) },

drivers/clk/sunxi-ng/ccu-sun20i-d1.h

@@ -10,6 +10,6 @@
 #include <dt-bindings/clock/sun20i-d1-ccu.h>
 #include <dt-bindings/reset/sun20i-d1-ccu.h>
 
-#define CLK_NUMBER		(CLK_FANOUT2 + 1)
+#define CLK_NUMBER		(CLK_BUS_CAN1 + 1)
 
 #endif /* _CCU_SUN20I_D1_H_ */