Merge tag 'usb-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt fixes from Greg KH:
 "Here are some small USB and Thunderbolt driver fixes for 5.9-rc5.

  Nothing huge, just a number of bugfixes and new device ids for
  problems reported:

   - new USB serial driver ids

   - bug fixes for syzbot reported problems

   - typec driver fixes

   - thunderbolt driver fixes

   - revert of reported broken commit

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes
  usb: typec: intel_pmc_mux: Do not configure Altmode HPD High
  usb: core: fix slab-out-of-bounds Read in read_descriptors
  Revert "usb: dwc3: meson-g12a: fix shared reset control use"
  usb: typec: ucsi: acpi: Check the _DEP dependencies
  usb: typec: intel_pmc_mux: Un-register the USB role switch
  usb: Fix out of sync data toggle if a configured device is reconfigured
  USB: serial: option: support dynamic Quectel USB compositions
  USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules
  thunderbolt: Use maximum USB3 link rate when reclaiming if link is not up
  thunderbolt: Disable ports that are not implemented
  USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter

Author: torvalds

drivers/thunderbolt/switch.c

@@ -684,6 +684,7 @@ static int tb_init_port(struct tb_port *port)
 		if (res == -ENODEV) {
 			tb_dbg(port->sw->tb, " Port %d: not implemented\n",
 			       port->port);
+			port->disabled = true;
 			return 0;
 		}
 		return res;

drivers/thunderbolt/tb.h

@@ -186,7 +186,7 @@ struct tb_switch {
  * @cap_adap: Offset of the adapter specific capability (%0 if not present)
  * @cap_usb4: Offset to the USB4 port capability (%0 if not present)
  * @port: Port number on switch
- * @disabled: Disabled by eeprom
+ * @disabled: Disabled by eeprom or enabled but not implemented
  * @bonded: true if the port is bonded (two lanes combined as one)
  * @dual_link_port: If the switch is connected using two ports, points
  *		    to the other port.

drivers/thunderbolt/tunnel.c

@@ -951,10 +951,18 @@ static void tb_usb3_reclaim_available_bandwidth(struct tb_tunnel *tunnel,
 	int ret, max_rate, allocate_up, allocate_down;
 
 	ret = usb4_usb3_port_actual_link_rate(tunnel->src_port);
-	if (ret <= 0) {
-		tb_tunnel_warn(tunnel, "tunnel is not up\n");
+	if (ret < 0) {
+		tb_tunnel_warn(tunnel, "failed to read actual link rate\n");
 		return;
+	} else if (!ret) {
+		/* Use maximum link rate if the link valid is not set */
+		ret = usb4_usb3_port_max_link_rate(tunnel->src_port);
+		if (ret < 0) {
+			tb_tunnel_warn(tunnel, "failed to read maximum link rate\n");
+			return;
+		}
 	}
+
 	/*
 	 * 90% of the max rate can be allocated for isochronous
 	 * transfers.

drivers/usb/core/message.c

@@ -1205,6 +1205,34 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
 	}
 }
 
+/*
+ * usb_disable_device_endpoints -- Disable all endpoints for a device
+ * @dev: the device whose endpoints are being disabled
+ * @skip_ep0: 0 to disable endpoint 0, 1 to skip it.
+ */
+static void usb_disable_device_endpoints(struct usb_device *dev, int skip_ep0)
+{
+	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
+	int i;
+
+	if (hcd->driver->check_bandwidth) {
+		/* First pass: Cancel URBs, leave endpoint pointers intact. */
+		for (i = skip_ep0; i < 16; ++i) {
+			usb_disable_endpoint(dev, i, false);
+			usb_disable_endpoint(dev, i + USB_DIR_IN, false);
+		}
+		/* Remove endpoints from the host controller internal state */
+		mutex_lock(hcd->bandwidth_mutex);
+		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		mutex_unlock(hcd->bandwidth_mutex);
+	}
+	/* Second pass: remove endpoint pointers */
+	for (i = skip_ep0; i < 16; ++i) {
+		usb_disable_endpoint(dev, i, true);
+		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
+	}
+}
+
 /**
  * usb_disable_device - Disable all the endpoints for a USB device
  * @dev: the device whose endpoints are being disabled
@@ -1218,7 +1246,6 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
 void usb_disable_device(struct usb_device *dev, int skip_ep0)
 {
 	int i;
-	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
 
 	/* getting rid of interfaces will disconnect
 	 * any drivers bound to them (a key side effect)
@@ -1264,22 +1291,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
 
 	dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
 		skip_ep0 ? "non-ep0" : "all");
-	if (hcd->driver->check_bandwidth) {
-		/* First pass: Cancel URBs, leave endpoint pointers intact. */
-		for (i = skip_ep0; i < 16; ++i) {
-			usb_disable_endpoint(dev, i, false);
-			usb_disable_endpoint(dev, i + USB_DIR_IN, false);
-		}
-		/* Remove endpoints from the host controller internal state */
-		mutex_lock(hcd->bandwidth_mutex);
-		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
-		mutex_unlock(hcd->bandwidth_mutex);
-		/* Second pass: remove endpoint pointers */
-	}
-	for (i = skip_ep0; i < 16; ++i) {
-		usb_disable_endpoint(dev, i, true);
-		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
-	}
+
+	usb_disable_device_endpoints(dev, skip_ep0);
 }
 
 /**
@@ -1522,6 +1535,9 @@ EXPORT_SYMBOL_GPL(usb_set_interface);
  * The caller must own the device lock.
  *
  * Return: Zero on success, else a negative error code.
+ *
+ * If this routine fails the device will probably be in an unusable state
+ * with endpoints disabled, and interfaces only partially enabled.
  */
 int usb_reset_configuration(struct usb_device *dev)
 {
@@ -1537,10 +1553,7 @@ int usb_reset_configuration(struct usb_device *dev)
 	 * calls during probe() are fine
 	 */
 
-	for (i = 1; i < 16; ++i) {
-		usb_disable_endpoint(dev, i, true);
-		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
-	}
+	usb_disable_device_endpoints(dev, 1); /* skip ep0*/
 
 	config = dev->actconfig;
 	retval = 0;
@@ -1553,34 +1566,10 @@ int usb_reset_configuration(struct usb_device *dev)
 		mutex_unlock(hcd->bandwidth_mutex);
 		return -ENOMEM;
 	}
-	/* Make sure we have enough bandwidth for each alternate setting 0 */
-	for (i = 0; i < config->desc.bNumInterfaces; i++) {
-		struct usb_interface *intf = config->interface[i];
-		struct usb_host_interface *alt;
 
-		alt = usb_altnum_to_altsetting(intf, 0);
-		if (!alt)
-			alt = &intf->altsetting[0];
-		if (alt != intf->cur_altsetting)
-			retval = usb_hcd_alloc_bandwidth(dev, NULL,
-					intf->cur_altsetting, alt);
-		if (retval < 0)
-			break;
-	}
-	/* If not, reinstate the old alternate settings */
+	/* xHCI adds all endpoints in usb_hcd_alloc_bandwidth */
+	retval = usb_hcd_alloc_bandwidth(dev, config, NULL, NULL);
 	if (retval < 0) {
-reset_old_alts:
-		for (i--; i >= 0; i--) {
-			struct usb_interface *intf = config->interface[i];
-			struct usb_host_interface *alt;
-
-			alt = usb_altnum_to_altsetting(intf, 0);
-			if (!alt)
-				alt = &intf->altsetting[0];
-			if (alt != intf->cur_altsetting)
-				usb_hcd_alloc_bandwidth(dev, NULL,
-						alt, intf->cur_altsetting);
-		}
 		usb_enable_lpm(dev);
 		mutex_unlock(hcd->bandwidth_mutex);
 		return retval;
@@ -1589,8 +1578,12 @@ int usb_reset_configuration(struct usb_device *dev)
 			USB_REQ_SET_CONFIGURATION, 0,
 			config->desc.bConfigurationValue, 0,
 			NULL, 0, USB_CTRL_SET_TIMEOUT);
-	if (retval < 0)
-		goto reset_old_alts;
+	if (retval < 0) {
+		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		usb_enable_lpm(dev);
+		mutex_unlock(hcd->bandwidth_mutex);
+		return retval;
+	}
 	mutex_unlock(hcd->bandwidth_mutex);
 
 	/* re-init hc/hcd interface/endpoint state */

drivers/usb/core/sysfs.c

@@ -889,7 +889,11 @@ read_descriptors(struct file *filp, struct kobject *kobj,
 	size_t srclen, n;
 	int cfgno;
 	void *src;
+	int retval;
 
+	retval = usb_lock_device_interruptible(udev);
+	if (retval < 0)
+		return -EINTR;
 	/* The binary attribute begins with the device descriptor.
 	 * Following that are the raw descriptor entries for all the
 	 * configurations (config plus subsidiary descriptors).
@@ -914,6 +918,7 @@ read_descriptors(struct file *filp, struct kobject *kobj,
 			off -= srclen;
 		}
 	}
+	usb_unlock_device(udev);
 	return count - nleft;
 }
 

drivers/usb/dwc3/dwc3-meson-g12a.c

@@ -737,13 +737,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 		goto err_disable_clks;
 	}
 
-	ret = reset_control_deassert(priv->reset);
+	ret = reset_control_reset(priv->reset);
 	if (ret)
-		goto err_assert_reset;
+		goto err_disable_clks;
 
 	ret = dwc3_meson_g12a_get_phys(priv);
 	if (ret)
-		goto err_assert_reset;
+		goto err_disable_clks;
 
 	ret = priv->drvdata->setup_regmaps(priv, base);
 	if (ret)
@@ -752,7 +752,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	if (priv->vbus) {
 		ret = regulator_enable(priv->vbus);
 		if (ret)
-			goto err_assert_reset;
+			goto err_disable_clks;
 	}
 
 	/* Get dr_mode */
@@ -765,13 +765,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 
 	ret = priv->drvdata->usb_init(priv);
 	if (ret)
-		goto err_assert_reset;
+		goto err_disable_clks;
 
 	/* Init PHYs */
 	for (i = 0 ; i < PHY_COUNT ; ++i) {
 		ret = phy_init(priv->phys[i]);
 		if (ret)
-			goto err_assert_reset;
+			goto err_disable_clks;
 	}
 
 	/* Set PHY Power */
@@ -809,9 +809,6 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
 	for (i = 0 ; i < PHY_COUNT ; ++i)
 		phy_exit(priv->phys[i]);
 
-err_assert_reset:
-	reset_control_assert(priv->reset);
-
 err_disable_clks:
 	clk_bulk_disable_unprepare(priv->drvdata->num_clks,
 				   priv->drvdata->clks);

drivers/usb/serial/ftdi_sio.c

@@ -713,6 +713,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_MTIUSBCONVERTER_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
 	{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },

drivers/usb/serial/ftdi_sio_ids.h

@@ -160,6 +160,7 @@
 #define XSENS_AWINDA_DONGLE_PID 0x0102
 #define XSENS_MTW_PID		0x0200	/* Xsens MTw */
 #define XSENS_MTDEVBOARD_PID	0x0300	/* Motion Tracker Development Board */
+#define XSENS_MTIUSBCONVERTER_PID	0x0301	/* MTi USB converter */
 #define XSENS_CONVERTER_PID	0xD00D	/* Xsens USB-serial converter */
 
 /* Xsens devices using FTDI VID */

drivers/usb/serial/option.c

@@ -1094,14 +1094,18 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M),
 	  .driver_info = RSVD(1) | RSVD(3) },
 	/* Quectel products using Quectel vendor ID */
-	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21),
-	  .driver_info = RSVD(4) },
-	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25),
-	  .driver_info = RSVD(4) },
-	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95),
-	  .driver_info = RSVD(4) },
-	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
-	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff),
+	  .driver_info = NUMEP2 },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0xff, 0xff),
+	  .driver_info = NUMEP2 },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff),
+	  .driver_info = NUMEP2 },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96, 0xff, 0xff, 0xff),
+	  .driver_info = NUMEP2 },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
@@ -1819,6 +1823,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) },	/* Simcom SIM7500/SIM7600 MBIM mode */
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff),	/* Simcom SIM7500/SIM7600 RNDIS mode */
 	  .driver_info = RSVD(7) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9205, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT+ECM mode */
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9206, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT-only mode */
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
 	  .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),

drivers/usb/typec/mux/intel_pmc_mux.c

@@ -61,14 +61,11 @@ enum {
 
 #define PMC_USB_ALTMODE_ORI_SHIFT	1
 #define PMC_USB_ALTMODE_UFP_SHIFT	3
-#define PMC_USB_ALTMODE_ORI_AUX_SHIFT	4
-#define PMC_USB_ALTMODE_ORI_HSL_SHIFT	5
 
 /* DP specific Mode Data bits */
 #define PMC_USB_ALTMODE_DP_MODE_SHIFT	8
 
 /* TBT specific Mode Data bits */
-#define PMC_USB_ALTMODE_HPD_HIGH	BIT(14)
 #define PMC_USB_ALTMODE_TBT_TYPE	BIT(17)
 #define PMC_USB_ALTMODE_CABLE_TYPE	BIT(18)
 #define PMC_USB_ALTMODE_ACTIVE_LINK	BIT(20)
@@ -179,15 +176,9 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
 	req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT;
 	req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT;
 
-	req.mode_data |= sbu_orientation(port) << PMC_USB_ALTMODE_ORI_AUX_SHIFT;
-	req.mode_data |= hsl_orientation(port) << PMC_USB_ALTMODE_ORI_HSL_SHIFT;
-
 	req.mode_data |= (state->mode - TYPEC_STATE_MODAL) <<
 			 PMC_USB_ALTMODE_DP_MODE_SHIFT;
 
-	if (data->status & DP_STATUS_HPD_STATE)
-		req.mode_data |= PMC_USB_ALTMODE_HPD_HIGH;
-
 	ret = pmc_usb_command(port, (void *)&req, sizeof(req));
 	if (ret)
 		return ret;
@@ -212,9 +203,6 @@ pmc_usb_mux_tbt(struct pmc_usb_port *port, struct typec_mux_state *state)
 	req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT;
 	req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT;
 
-	req.mode_data |= sbu_orientation(port) << PMC_USB_ALTMODE_ORI_AUX_SHIFT;
-	req.mode_data |= hsl_orientation(port) << PMC_USB_ALTMODE_ORI_HSL_SHIFT;
-
 	if (TBT_ADAPTER(data->device_mode) == TBT_ADAPTER_TBT3)
 		req.mode_data |= PMC_USB_ALTMODE_TBT_TYPE;
 
@@ -497,6 +485,7 @@ static int pmc_usb_probe(struct platform_device *pdev)
 	for (i = 0; i < pmc->num_ports; i++) {
 		typec_switch_unregister(pmc->port[i].typec_sw);
 		typec_mux_unregister(pmc->port[i].typec_mux);
+		usb_role_switch_unregister(pmc->port[i].usb_sw);
 	}
 
 	return ret;
@@ -510,6 +499,7 @@ static int pmc_usb_remove(struct platform_device *pdev)
 	for (i = 0; i < pmc->num_ports; i++) {
 		typec_switch_unregister(pmc->port[i].typec_sw);
 		typec_mux_unregister(pmc->port[i].typec_mux);
+		usb_role_switch_unregister(pmc->port[i].usb_sw);
 	}
 
 	return 0;