gpio: 74x164: Add SPI device ID table

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI device ID table.

Fixes: 96c8395 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>

Author: broonie

drivers/gpio/gpio-74x164.c

@@ -174,6 +174,13 @@ static int gen_74x164_remove(struct spi_device *spi)
 	return 0;
 }
 
+static const struct spi_device_id gen_74x164_spi_ids[] = {
+	{ .name = "74hc595" },
+	{ .name = "74lvc594" },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, gen_74x164_spi_ids);
+
 static const struct of_device_id gen_74x164_dt_ids[] = {
 	{ .compatible = "fairchild,74hc595" },
 	{ .compatible = "nxp,74lvc594" },
@@ -188,6 +195,7 @@ static struct spi_driver gen_74x164_driver = {
 	},
 	.probe		= gen_74x164_probe,
 	.remove		= gen_74x164_remove,
+	.id_table	= gen_74x164_spi_ids,
 };
 module_spi_driver(gen_74x164_driver);