edac: add support for Calxeda highbank memory controller

Add support for memory controller on Calxeda Highbank platforms. Highbank
platforms support a single 4GB mini-DIMM with 1-bit correction and 2-bit
detection.

Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>

Author: Rob Herring

Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt

@@ -0,0 +1,14 @@
+Calxeda DDR memory controller
+
+Properties:
+- compatible : Should be "calxeda,hb-ddr-ctrl"
+- reg : Address and size for DDR controller registers.
+- interrupts : Interrupt for DDR controller.
+
+Example:
+
+	memory-controller@fff00000 {
+		compatible = "calxeda,hb-ddr-ctrl";
+		reg = <0xfff00000 0x1000>;
+		interrupts = <0 91 4>;
+	};

arch/arm/boot/dts/highbank.dts

@@ -118,6 +118,12 @@
 			interrupts = <0 90 4>;
 		};
 
+		memory-controller@fff00000 {
+			compatible = "calxeda,hb-ddr-ctrl";
+			reg = <0xfff00000 0x1000>;
+			interrupts = <0 91 4>;
+		};
+
 		ipc@fff20000 {
 			compatible = "arm,pl320", "arm,primecell";
 			reg = <0xfff20000 0x1000>;

drivers/edac/Kconfig

@@ -7,7 +7,7 @@
 menuconfig EDAC
 	bool "EDAC (Error Detection And Correction) reporting"
 	depends on HAS_IOMEM
-	depends on X86 || PPC || TILE
+	depends on X86 || PPC || TILE || ARM
 	help
 	  EDAC is designed to report errors in the core system.
 	  These are low-level errors that are reported in the CPU or
@@ -302,4 +302,11 @@ config EDAC_TILE
 	  Support for error detection and correction on the
 	  Tilera memory controller.
 
+config EDAC_HIGHBANK_MC
+	tristate "Highbank Memory Controller"
+	depends on EDAC_MM_EDAC && ARCH_HIGHBANK
+	help
+	  Support for error detection and correction on the
+	  Calxeda Highbank memory controller.
+
 endif # EDAC

drivers/edac/Makefile

@@ -55,3 +55,5 @@ obj-$(CONFIG_EDAC_AMD8111)		+= amd8111_edac.o
 obj-$(CONFIG_EDAC_AMD8131)		+= amd8131_edac.o
 
 obj-$(CONFIG_EDAC_TILE)			+= tile_edac.o
+
+obj-$(CONFIG_EDAC_HIGHBANK_MC)	+= highbank_mc_edac.o

drivers/edac/highbank_mc_edac.c

@@ -0,0 +1,264 @@
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/edac.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/uaccess.h>
+
+#include "edac_core.h"
+#include "edac_module.h"
+
+/* DDR Ctrlr Error Registers */
+#define HB_DDR_ECC_OPT			0x128
+#define HB_DDR_ECC_U_ERR_ADDR		0x130
+#define HB_DDR_ECC_U_ERR_STAT		0x134
+#define HB_DDR_ECC_U_ERR_DATAL		0x138
+#define HB_DDR_ECC_U_ERR_DATAH		0x13c
+#define HB_DDR_ECC_C_ERR_ADDR		0x140
+#define HB_DDR_ECC_C_ERR_STAT		0x144
+#define HB_DDR_ECC_C_ERR_DATAL		0x148
+#define HB_DDR_ECC_C_ERR_DATAH		0x14c
+#define HB_DDR_ECC_INT_STATUS		0x180
+#define HB_DDR_ECC_INT_ACK		0x184
+#define HB_DDR_ECC_U_ERR_ID		0x424
+#define HB_DDR_ECC_C_ERR_ID		0x428
+
+#define HB_DDR_ECC_INT_STAT_CE		0x8
+#define HB_DDR_ECC_INT_STAT_DOUBLE_CE	0x10
+#define HB_DDR_ECC_INT_STAT_UE		0x20
+#define HB_DDR_ECC_INT_STAT_DOUBLE_UE	0x40
+
+#define HB_DDR_ECC_OPT_MODE_MASK	0x3
+#define HB_DDR_ECC_OPT_FWC		0x100
+#define HB_DDR_ECC_OPT_XOR_SHIFT	16
+
+struct hb_mc_drvdata {
+	void __iomem *mc_vbase;
+};
+
+static irqreturn_t highbank_mc_err_handler(int irq, void *dev_id)
+{
+	struct mem_ctl_info *mci = dev_id;
+	struct hb_mc_drvdata *drvdata = mci->pvt_info;
+	u32 status, err_addr;
+
+	/* Read the interrupt status register */
+	status = readl(drvdata->mc_vbase + HB_DDR_ECC_INT_STATUS);
+
+	if (status & HB_DDR_ECC_INT_STAT_UE) {
+		err_addr = readl(drvdata->mc_vbase + HB_DDR_ECC_U_ERR_ADDR);
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+				     err_addr >> PAGE_SHIFT,
+				     err_addr & ~PAGE_MASK, 0,
+				     0, 0, -1,
+				     mci->ctl_name, "");
+	}
+	if (status & HB_DDR_ECC_INT_STAT_CE) {
+		u32 syndrome = readl(drvdata->mc_vbase + HB_DDR_ECC_C_ERR_STAT);
+		syndrome = (syndrome >> 8) & 0xff;
+		err_addr = readl(drvdata->mc_vbase + HB_DDR_ECC_C_ERR_ADDR);
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+				     err_addr >> PAGE_SHIFT,
+				     err_addr & ~PAGE_MASK, syndrome,
+				     0, 0, -1,
+				     mci->ctl_name, "");
+	}
+
+	/* clear the error, clears the interrupt */
+	writel(status, drvdata->mc_vbase + HB_DDR_ECC_INT_ACK);
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_EDAC_DEBUG
+static ssize_t highbank_mc_err_inject_write(struct file *file,
+				      const char __user *data,
+				      size_t count, loff_t *ppos)
+{
+	struct mem_ctl_info *mci = file->private_data;
+	struct hb_mc_drvdata *pdata = mci->pvt_info;
+	char buf[32];
+	size_t buf_size;
+	u32 reg;
+	u8 synd;
+
+	buf_size = min(count, (sizeof(buf)-1));
+	if (copy_from_user(buf, data, buf_size))
+		return -EFAULT;
+	buf[buf_size] = 0;
+
+	if (!kstrtou8(buf, 16, &synd)) {
+		reg = readl(pdata->mc_vbase + HB_DDR_ECC_OPT);
+		reg &= HB_DDR_ECC_OPT_MODE_MASK;
+		reg |= (synd << HB_DDR_ECC_OPT_XOR_SHIFT) | HB_DDR_ECC_OPT_FWC;
+		writel(reg, pdata->mc_vbase + HB_DDR_ECC_OPT);
+	}
+
+	return count;
+}
+
+static int debugfs_open(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+static const struct file_operations highbank_mc_debug_inject_fops = {
+	.open = debugfs_open,
+	.write = highbank_mc_err_inject_write,
+	.llseek = generic_file_llseek,
+};
+
+static void __devinit highbank_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
+{
+	if (mci->debugfs)
+		debugfs_create_file("inject_ctrl", S_IWUSR, mci->debugfs, mci,
+				    &highbank_mc_debug_inject_fops);
+;
+}
+#else
+static void __devinit highbank_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
+{}
+#endif
+
+static int __devinit highbank_mc_probe(struct platform_device *pdev)
+{
+	struct edac_mc_layer layers[2];
+	struct mem_ctl_info *mci;
+	struct hb_mc_drvdata *drvdata;
+	struct dimm_info *dimm;
+	struct resource *r;
+	u32 control;
+	int irq;
+	int res = 0;
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = 1;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = 1;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
+			    sizeof(struct hb_mc_drvdata));
+	if (!mci)
+		return -ENOMEM;
+
+	mci->pdev = &pdev->dev;
+	drvdata = mci->pvt_info;
+	platform_set_drvdata(pdev, mci);
+
+	if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL))
+		return -ENOMEM;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "Unable to get mem resource\n");
+		res = -ENODEV;
+		goto err;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev, r->start,
+				     resource_size(r), dev_name(&pdev->dev))) {
+		dev_err(&pdev->dev, "Error while requesting mem region\n");
+		res = -EBUSY;
+		goto err;
+	}
+
+	drvdata->mc_vbase = devm_ioremap(&pdev->dev,
+					  r->start, resource_size(r));
+	if (!drvdata->mc_vbase) {
+		dev_err(&pdev->dev, "Unable to map regs\n");
+		res = -ENOMEM;
+		goto err;
+	}
+
+	control = readl(drvdata->mc_vbase + HB_DDR_ECC_OPT) & 0x3;
+	if (!control || (control == 0x2)) {
+		dev_err(&pdev->dev, "No ECC present, or ECC disabled\n");
+		res = -ENODEV;
+		goto err;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	res = devm_request_irq(&pdev->dev, irq, highbank_mc_err_handler,
+			       0, dev_name(&pdev->dev), mci);
+	if (res < 0) {
+		dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
+		goto err;
+	}
+
+	mci->mtype_cap = MEM_FLAG_DDR3;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = dev_name(&pdev->dev);
+	mci->mod_ver = "1";
+	mci->ctl_name = dev_name(&pdev->dev);
+	mci->scrub_mode = SCRUB_SW_SRC;
+
+	/* Only a single 4GB DIMM is supported */
+	dimm = *mci->dimms;
+	dimm->nr_pages = (~0UL >> PAGE_SHIFT) + 1;
+	dimm->grain = 8;
+	dimm->dtype = DEV_X8;
+	dimm->mtype = MEM_DDR3;
+	dimm->edac_mode = EDAC_SECDED;
+
+	res = edac_mc_add_mc(mci);
+	if (res < 0)
+		goto err;
+
+	highbank_mc_create_debugfs_nodes(mci);
+
+	devres_close_group(&pdev->dev, NULL);
+	return 0;
+err:
+	devres_release_group(&pdev->dev, NULL);
+	edac_mc_free(mci);
+	return res;
+}
+
+static int highbank_mc_remove(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+	edac_mc_del_mc(&pdev->dev);
+	edac_mc_free(mci);
+	return 0;
+}
+
+static const struct of_device_id hb_ddr_ctrl_of_match[] = {
+	{ .compatible = "calxeda,hb-ddr-ctrl", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hb_ddr_ctrl_of_match);
+
+static struct platform_driver highbank_mc_edac_driver = {
+	.probe = highbank_mc_probe,
+	.remove = highbank_mc_remove,
+	.driver = {
+		.name = "hb_mc_edac",
+		.of_match_table = hb_ddr_ctrl_of_match,
+	},
+};
+
+module_platform_driver(highbank_mc_edac_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Calxeda, Inc.");
+MODULE_DESCRIPTION("EDAC Driver for Calxeda Highbank");