Merge tag 'irqchip-4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip updates for 4.16-rc2 from Marc Zyngier

 - A MIPS GIC fix for spurious, masked interrupts
 - A fix for a subtle IPI bug in GICv3
 - Do not probe GICv3 ITSs that are marked as disabled
 - Multi-MSI support for GICv2m
 - Various cleanups

Author: KAGA-KOKO

.gitignore

@@ -65,6 +65,11 @@ modules.builtin
 #
 /debian/
 
+#
+# Snap directory (make snap-pkg)
+#
+/snap/
+
 #
 # tar directory (make tar*-pkg)
 #

Documentation/00-INDEX

@@ -228,8 +228,6 @@ isdn/
 	- directory with info on the Linux ISDN support, and supported cards.
 kbuild/
 	- directory with info about the kernel build process.
-kernel-doc-nano-HOWTO.txt
-	- outdated info about kernel-doc documentation.
 kdump/
 	- directory with mini HowTo on getting the crash dump code to work.
 doc-guide/
@@ -346,8 +344,6 @@ prctl/
 	- directory with info on the priveledge control subsystem
 preempt-locking.txt
 	- info on locking under a preemptive kernel.
-printk-formats.txt
-	- how to get printk format specifiers right
 process/
 	- how to work with the mainline kernel development process.
 pps/

Documentation/ABI/stable/sysfs-bus-vmbus

@@ -42,72 +42,93 @@ Contact:	K. Y. Srinivasan <[email protected]>
 Description:	The 16 bit vendor ID of the device
 Users:		tools/hv/lsvmbus and user level RDMA libraries
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <[email protected]>
+Description:	Directory for per-channel information
+		NN is the VMBUS relid associtated with the channel.
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/cpu
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <[email protected]>
 Description:	VCPU (sub)channel is affinitized to
-Users:		tools/hv/lsvmbus and other debuggig tools
+Users:		tools/hv/lsvmbus and other debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/cpu
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <[email protected]>
 Description:	VCPU (sub)channel is affinitized to
-Users:		tools/hv/lsvmbus and other debuggig tools
+Users:		tools/hv/lsvmbus and other debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/in_mask
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/in_mask
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <[email protected]>
-Description:	Inbound channel signaling state
+Description:	Host to guest channel interrupt mask
 Users:		Debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/latency
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/latency
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <[email protected]>
 Description:	Channel signaling latency
 Users:		Debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/out_mask
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/out_mask
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <[email protected]>
-Description:	Outbound channel signaling state
+Description:	Guest to host channel interrupt mask
 Users:		Debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/pending
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/pending
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <[email protected]>
 Description:	Channel interrupt pending state
 Users:		Debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/read_avail
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/read_avail
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <[email protected]>
-Description:	Bytes availabble to read
+Description:	Bytes available to read
 Users:		Debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/write_avail
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/write_avail
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <[email protected]>
-Description:	Bytes availabble to write
+Description:	Bytes available to write
 Users:		Debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/events
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/events
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <[email protected]>
 Description:	Number of times we have signaled the host
 Users:		Debugging tools
 
-What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/interrupts
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/interrupts
 Date:		September. 2017
 KernelVersion:	4.14
 Contact:	Stephen Hemminger <[email protected]>
 Description:	Number of times we have taken an interrupt (incoming)
 Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/subchannel_id
+Date:		January. 2018
+KernelVersion:	4.16
+Contact:	Stephen Hemminger <[email protected]>
+Description:	Subchannel ID associated with VMBUS channel
+Users:		Debugging tools and userspace drivers
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/NN/monitor_id
+Date:		January. 2018
+KernelVersion:	4.16
+Contact:	Stephen Hemminger <[email protected]>
+Description:	Monitor bit associated with channel
+Users:		Debugging tools and userspace drivers

Documentation/ABI/testing/devlink-resource-mlxsw

@@ -0,0 +1,33 @@
+What: 		/kvd/
+Date:		08-Jan-2018
+KernelVersion:	v4.16
+Contact:	[email protected]
+Description:	The main database in the Spectrum device is a centralized
+		KVD database used for many of the tables used to configure
+		the chip including L2 FDB, L3 LPM, ECMP and more. The KVD
+		is divided into two sections, the first is hash-based table
+		and the second is a linear access table. The division
+		between the linear and hash-based sections is static and
+		require reload before the changes take effect.
+
+What: 		/kvd/linear
+Date:		08-Jan-2018
+KernelVersion:	v4.16
+Contact:	[email protected]
+Description:	The linear section of the KVD is managed by software as a
+		flat memory accessed using an index.
+
+What: 		/kvd/hash_single
+Date:		08-Jan-2018
+KernelVersion:	v4.16
+Contact:	[email protected]
+Description:	The hash based section of the KVD is managed by the switch
+		device. Used in case the key size is smaller or equal to
+		64bit.
+
+What: 		/kvd/hash_double
+Date:		08-Jan-2018
+KernelVersion:	v4.16
+Contact:	[email protected]
+Description:	The hash based section of the KVD is managed by the switch
+		device. Used in case the key is larger than 64 bit.

Documentation/ABI/testing/evm

@@ -14,30 +14,46 @@ Description:
 		generated either locally or remotely using an
 		asymmetric key. These keys are loaded onto root's
 		keyring using keyctl, and EVM is then enabled by
-		echoing a value to <securityfs>/evm:
+		echoing a value to <securityfs>/evm made up of the
+		following bits:
 
-		1: enable HMAC validation and creation
-		2: enable digital signature validation
-		3: enable HMAC and digital signature validation and HMAC
-		   creation
+		Bit	  Effect
+		0	  Enable HMAC validation and creation
+		1	  Enable digital signature validation
+		2	  Permit modification of EVM-protected metadata at
+			  runtime. Not supported if HMAC validation and
+			  creation is enabled.
+		31	  Disable further runtime modification of EVM policy
 
-		Further writes will be blocked if HMAC support is enabled or
-		if bit 32 is set:
+		For example:
 
-		echo 0x80000002 ><securityfs>/evm
+		echo 1 ><securityfs>/evm
 
-		will enable digital signature validation and block
-		further writes to <securityfs>/evm.
+		will enable HMAC validation and creation
 
-		Until this is done, EVM can not create or validate the
-		'security.evm' xattr, but returns INTEGRITY_UNKNOWN.
-		Loading keys and signaling EVM should be done as early
-		as possible.  Normally this is done in the initramfs,
-		which has already been measured as part of the trusted
-		boot.  For more information on creating and loading
-		existing trusted/encrypted keys, refer to:
+		echo 0x80000003 ><securityfs>/evm
 
-		Documentation/security/keys/trusted-encrypted.rst. Both dracut
-		(via 97masterkey and 98integrity) and systemd (via
+		will enable HMAC and digital signature validation and
+		HMAC creation and disable all further modification of policy.
+
+		echo 0x80000006 ><securityfs>/evm
+
+		will enable digital signature validation, permit
+		modification of EVM-protected metadata and
+		disable all further modification of policy
+
+		Note that once a key has been loaded, it will no longer be
+		possible to enable metadata modification.
+
+		Until key loading has been signaled EVM can not create
+		or validate the 'security.evm' xattr, but returns
+		INTEGRITY_UNKNOWN.  Loading keys and signaling EVM
+		should be done as early as possible.  Normally this is
+		done in the initramfs, which has already been measured
+		as part of the trusted boot.  For more information on
+		creating and loading existing trusted/encrypted keys,
+		refer to:
+		Documentation/security/keys/trusted-encrypted.rst. Both
+		dracut (via 97masterkey and 98integrity) and systemd (via
 		core/ima-setup) have support for loading keys at boot
 		time.

Documentation/ABI/testing/ima_policy

@@ -17,7 +17,8 @@ Description:
 
 		rule format: action [condition ...]
 
-		action: measure | dont_measure | appraise | dont_appraise | audit
+		action: measure | dont_measure | appraise | dont_appraise |
+			audit | hash | dont_hash
 		condition:= base | lsm  [option]
 			base:	[[func=] [mask=] [fsmagic=] [fsuuid=] [uid=]
 				[euid=] [fowner=]]

Documentation/ABI/testing/rtc-cdev

@@ -0,0 +1,42 @@
+What:		/dev/rtcX
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	[email protected]
+Description:
+		The ioctl interface to drivers for real-time clocks (RTCs).
+		Following actions are supported:
+
+		* RTC_RD_TIME, RTC_SET_TIME: Read or set the RTC time. Time
+		  format is a Gregorian calendar date and 24 hour wall clock
+		  time.
+
+		* RTC_AIE_ON, RTC_AIE_OFF: Enable or disable the alarm interrupt
+		  for RTCs that support alarms
+
+		* RTC_ALM_READ, RTC_ALM_SET: Read or set the alarm time for
+		  RTCs that support alarms. Can be set upto 24 hours in the
+		  future. Requires a separate RTC_AIE_ON call to enable the
+		  alarm interrupt. (Prefer to use RTC_WKALM_*)
+
+		* RTC_WKALM_RD, RTC_WKALM_SET: For RTCs that support a more
+		  powerful interface, which can issue alarms beyond 24 hours and
+		  enable IRQs in the same request.
+
+		* RTC_PIE_ON, RTC_PIE_OFF: Enable or disable the periodic
+		  interrupt for RTCs that support periodic interrupts.
+
+		* RTC_UIE_ON, RTC_UIE_OFF: Enable or disable the update
+		  interrupt for RTCs that support it.
+
+		* RTC_IRQP_READ, RTC_IRQP_SET: Read or set the frequency for
+		  periodic interrupts for RTCs that support periodic interrupts.
+		  Requires a separate RTC_PIE_ON call to enable the periodic
+		  interrupts.
+
+		The ioctl() calls supported by the older /dev/rtc interface are
+		also supported by the newer RTC class framework. However,
+		because the chips and systems are not standardized, some PC/AT
+		functionality might not be provided. And in the same way, some
+		newer features -- including those enabled by ACPI -- are exposed
+		by the RTC class framework, but can't be supported by the older
+		driver.

Documentation/ABI/testing/sysfs-bus-iio

@@ -32,7 +32,7 @@ Description:
 		Description of the physical chip / device for device X.
 		Typically a part number.
 
-What:		/sys/bus/iio/devices/iio:deviceX/timestamp_clock
+What:		/sys/bus/iio/devices/iio:deviceX/current_timestamp_clock
 KernelVersion:	4.5
 Contact:	[email protected]
 Description:
@@ -1290,7 +1290,7 @@ KernelVersion:	3.4
 Contact:	[email protected]
 Description:
 		Unit-less light intensity. Modifiers both and ir indicate
-		that measurements contains visible and infrared light
+		that measurements contain visible and infrared light
 		components or just infrared light, respectively. Modifier uv indicates
 		that measurements contain ultraviolet light components.
 
@@ -1413,6 +1413,16 @@ Description:
 		the available samples after the timeout expires and thus have a
 		maximum delay guarantee.
 
+What:		/sys/bus/iio/devices/iio:deviceX/buffer/data_available
+KernelVersion: 4.16
+Contact:	[email protected]
+Description:
+		A read-only value indicating the bytes of data available in the
+		buffer. In the case of an output buffer, this indicates the
+		amount of empty space available to write data to. In the case of
+		an input buffer, this indicates the amount of data available for
+		reading.
+
 What:		/sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_enabled
 KernelVersion: 4.2
 Contact:	[email protected]

Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32

@@ -0,0 +1,16 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_spi_clk_freq
+KernelVersion:	4.14
+Contact:	[email protected]
+Description:
+		For audio purpose only.
+		Used by audio driver to set/get the spi input frequency.
+		This is mandatory if DFSDM is slave on SPI bus, to
+		provide information on the SPI clock frequency during runtime
+		Notice that the SPI frequency should be a multiple of sample
+		frequency to ensure the precision.
+		if DFSDM input is SPI master
+			Reading  SPI clkout frequency,
+			error on writing
+		If DFSDM input is SPI Slave:
+			Reading returns value previously set.
+			Writing value before starting conversions.

Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd

@@ -0,0 +1,25 @@
+What:		/sys/bus/pci/drivers/xhci_hcd/.../dbc
+Date:		June 2017
+Contact:	Lu Baolu <[email protected]>
+Description:
+		xHCI compatible USB host controllers (i.e. super-speed
+		USB3 controllers) are often implemented with the Debug
+		Capability (DbC). It can present a debug device which
+		is fully compliant with the USB framework and provides
+		the equivalent of a very high performance full-duplex
+		serial link for debug purpose.
+
+		The DbC debug device shares a root port with xHCI host.
+		When the DbC is enabled, the root port will be assigned
+		to the Debug Capability. Otherwise, it will be assigned
+		to xHCI.
+
+		Writing "enable" to this attribute will enable the DbC
+		functionality and the shared root port will be assigned
+		to the DbC device. Writing "disable" to this attribute
+		will disable the DbC functionality and the shared root
+		port will roll back to the xHCI.
+
+		Reading this attribute gives the state of the DbC. It
+		can be one of the following states: disabled, enabled,
+		initialized, connected, configured and stalled.