Merge tag 'mtd/for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Miquel Raynal:
 "MTD changes:
   - blkdevs:
       - Simplify the refcounting in blktrans_{open, release}
       - Simplify blktrans_getgeo
       - Remove blktrans_ref_mutex
       - Simplify blktrans_dev_get
       - Use lockdep_assert_held
       - Don't hold del_mtd_blktrans_dev in blktrans_{open, release}
   - ftl:
       - Don't cast away the type when calling add_mtd_blktrans_dev
       - Don't cast away the type when calling add_mtd_blktrans_dev
       - Use container_of() rather than cast
       - Fix use-after-free
       - Add discard support
       - Allow use of MTD_RAM for testing purposes
   - concat:
       - Check _read, _write callbacks existence before assignment
       - Judge callback existence based on the master
   - maps:
       - Maps: remove dead MTD map driver for PMC-Sierra MSP boards
   - mtdblock:
       - Warn if added for a NAND device
       - Add comment about UBI block devices
       - Update old JFFS2 mention in Kconfig
   - partitions:
       - Redboot: convert to YAML

  NAND core changes:
   - Repair Miquel Raynal's email address in MAINTAINERS
   - Fix a couple of spelling mistakes in Kconfig
   - bbt: Skip bad blocks when searching for the BBT in NAND
   - Remove never changed ret variable

  Raw NAND changes:
   - cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
   - intel: Fix error handling in probe
   - omap: Fix kernel doc warning on 'calcuate' typo
   - gpmc: Fix the ECC bytes vs. OOB bytes equation

  SPI-NAND core changes:
   - Properly fill the OOB area.
   - Fix comment

  SPI-NAND drivers changes:
   - macronix: Add Quad support for serial NAND flash"

* tag 'mtd/for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (30 commits)
  mtd: rawnand: cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()'
  mtd_blkdevs: simplify the refcounting in blktrans_{open, release}
  mtd_blkdevs: simplify blktrans_getgeo
  mtd_blkdevs: remove blktrans_ref_mutex
  mtd_blkdevs: simplify blktrans_dev_get
  mtd/rfd_ftl: don't cast away the type when calling add_mtd_blktrans_dev
  mtd/ftl: don't cast away the type when calling add_mtd_blktrans_dev
  mtd_blkdevs: use lockdep_assert_held
  mtd_blkdevs: don't hold del_mtd_blktrans_dev in blktrans_{open, release}
  mtd: rawnand: intel: Fix error handling in probe
  mtd: mtdconcat: Check _read, _write callbacks existence before assignment
  mtd: mtdconcat: Judge callback existence based on the master
  mtd: maps: remove dead MTD map driver for PMC-Sierra MSP boards
  mtd: rfd_ftl: use container_of() rather than cast
  mtd: rfd_ftl: fix use-after-free
  mtd: rfd_ftl: add discard support
  mtd: rfd_ftl: allow use of MTD_RAM for testing purposes
  mtdblock: Warn if added for a NAND device
  mtd: spinand: macronix: Add Quad support for serial NAND flash
  mtdblock: Add comment about UBI block devices
  ...

Author: torvalds

Documentation/devicetree/bindings/mtd/gpmc-nand.txt

@@ -122,7 +122,7 @@ on various other factors also like;
 	so the device should have enough free bytes available its OOB/Spare
 	area to accommodate ECC for entire page. In general following expression
 	helps in determining if given device can accommodate ECC syndrome:
-	"2 + (PAGESIZE / 512) * ECC_BYTES" >= OOBSIZE"
+	"2 + (PAGESIZE / 512) * ECC_BYTES" <= OOBSIZE"
 	where
 		OOBSIZE		number of bytes in OOB/spare area
 		PAGESIZE	number of bytes in main-area of device page

Documentation/devicetree/bindings/mtd/partitions/redboot-fis.txt

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/redboot-fis.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RedBoot FLASH Image System (FIS) Partitions
+
+description: The FLASH Image System (FIS) directory is a flash description
+    format closely associated with the RedBoot boot loader.
+    It uses one single flash eraseblock in the flash to store an index of
+    all images in the flash.
+    This block size will vary depending on flash but is typically
+    32 KB in size.
+
+maintainers:
+  - Linus Walleij <[email protected]>
+
+properties:
+  compatible:
+    const: redboot-fis
+
+  fis-index-block:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: a index to the eraseblock containing the FIS directory on this
+      device. On a flash memory with 32KB eraseblocks, 0 means the first
+      eraseblock at 0x00000000, 1 means the second eraseblock at 0x00008000 and so on.
+
+required:
+  - compatible
+  - fis-index-block
+
+additionalProperties: false
+
+examples:
+  - |
+    flash {
+      partitions {
+        compatible = "redboot-fis";
+        fis-index-block = <0>;
+      };
+    };

Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml

@@ -1496,15 +1496,15 @@ F:	drivers/amba/
 F:	include/linux/amba/bus.h
 
 ARM PRIMECELL PL35X NAND CONTROLLER DRIVER
-M:	Miquel Raynal <[email protected]@bootlin.com>
+M:	Miquel Raynal <[email protected]>
 M:	Naga Sureshkumar Relli <[email protected]>
 L:	[email protected]
 S:	Maintained
 F:	Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
 F:	drivers/mtd/nand/raw/pl35x-nand-controller.c
 
 ARM PRIMECELL PL35X SMC DRIVER
-M:	Miquel Raynal <[email protected]@bootlin.com>
+M:	Miquel Raynal <[email protected]>
 M:	Naga Sureshkumar Relli <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
 S:	Maintained

MAINTAINERS

@@ -45,10 +45,9 @@ config MTD_BLOCK
 	  on RAM chips in this manner. This block device is a user of MTD
 	  devices performing that function.
 
-	  At the moment, it is also required for the Journalling Flash File
-	  System(s) to obtain a handle on the MTD device when it's mounted
-	  (although JFFS and JFFS2 don't actually use any of the functionality
-	  of the mtdblock device).
+	  Note that mounting a JFFS2 filesystem doesn't require using mtdblock.
+	  It's possible to mount a rootfs using the MTD device on the "root="
+	  bootargs as "root=mtd2" or "root=mtd:name_of_device".
 
 	  Later, it may be extended to perform read/erase/modify/write cycles
 	  on flash chips to emulate a smaller block size. Needless to say,
@@ -70,6 +69,9 @@ config MTD_BLOCK_RO
 	  You do not need this option for use with the DiskOnChip devices. For
 	  those, enable NFTL support (CONFIG_NFTL) instead.
 
+comment "Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK."
+	depends on MTD_BLOCK || MTD_BLOCK_RO
+
 config FTL
 	tristate "FTL (Flash Translation Layer) support"
 	depends on BLOCK

drivers/mtd/Kconfig

@@ -1029,7 +1029,7 @@ static void ftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
 
 		partition->mbd.tr = tr;
 		partition->mbd.devnum = -1;
-		if (!add_mtd_blktrans_dev((void *)partition))
+		if (!add_mtd_blktrans_dev(&partition->mbd))
 			return;
 	}
 

drivers/mtd/ftl.c

@@ -127,29 +127,6 @@ config MTD_PHYSMAP_GPIO_ADDR
 	  Extend the physmap driver to allow flashes to be partially
 	  physically addressed and assisted by GPIOs.
 
-config MTD_PMC_MSP_EVM
-	tristate "CFI Flash device mapped on PMC-Sierra MSP"
-	depends on PMC_MSP && MTD_CFI
-	help
-	  This provides a 'mapping' driver which supports the way
-	  in which user-programmable flash chips are connected on the
-	  PMC-Sierra MSP eval/demo boards.
-
-choice
-	prompt "Maximum mappable memory available for flash IO"
-	depends on MTD_PMC_MSP_EVM
-	default MSP_FLASH_MAP_LIMIT_32M
-
-config MSP_FLASH_MAP_LIMIT_32M
-	bool "32M"
-
-endchoice
-
-config MSP_FLASH_MAP_LIMIT
-	hex
-	default "0x02000000"
-	depends on MSP_FLASH_MAP_LIMIT_32M
-
 config MTD_SUN_UFLASH
 	tristate "Sun Microsystems userflash support"
 	depends on SPARC && MTD_CFI && PCI

drivers/mtd/maps/Kconfig

@@ -25,7 +25,6 @@ physmap-objs-$(CONFIG_MTD_PHYSMAP_IXP4XX) += physmap-ixp4xx.o
 physmap-objs			:= $(physmap-objs-y)
 obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o
 obj-$(CONFIG_MTD_PISMO)		+= pismo.o
-obj-$(CONFIG_MTD_PMC_MSP_EVM)   += pmcmsp-flash.o
 obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
 obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
 obj-$(CONFIG_MTD_SBC_GXX)	+= sbc_gxx.o