Merge branches 'clk-microchip', 'clk-allwinner', 'clk-mediatek', 'clk-imx' and 'clk-core' into clk-next

 - Various cleanups and improvements to Mediatek clk drivers to reduce
   code size and modernize the drivers
 - Support for Mediatek MT7891 SoC clks

* clk-microchip:
  clk: at91: do not compile dt-compat.c for sama7g5 and sam9x60
  clk: at91: mark ddr clocks as critical

* clk-allwinner:
  clk: sunxi-ng: d1: Add CAN bus gates and resets
  dt-bindings: clock: Add D1 CAN bus gates and resets
  clk: sunxi-ng: d1: Mark cpux clock as critical
  clk: sunxi-ng: d1: Allow building for R528/T113
  clk: sunxi-ng: Move SoC driver conditions to dependencies
  clk: sunxi-ng: Remove duplicate ARCH_SUNXI dependencies
  clk: sunxi-ng: Avoid computing the rate twice
  clk: sunxi-ng: h3/h5: Model H3 CLK_DRAM as a fixed clock
  clk: sunxi-ng: fix ccu_mmc_timing.c kernel-doc issues

* clk-mediatek: (29 commits)
  clk: mediatek: clk-mtk: Remove unneeded semicolon
  clk: mediatek: remove MT8195 vppsys/0/1 simple_probe
  dt-bindings: arm: mediatek: migrate MT8195 vppsys0/1 to mtk-mmsys driver
  clk: mediatek: add MT7981 clock support
  dt-bindings: clock: mediatek: add mt7981 clock IDs
  dt-bindings: clock: Add compatibles for MT7981
  clk: mediatek: clk-mt7986-topckgen: Migrate to mtk_clk_simple_probe()
  clk: mediatek: clk-mt7986-topckgen: Properly keep some clocks enabled
  clk: mediatek: clk-mt6795-topckgen: Migrate to mtk_clk_simple_probe()
  clk: mediatek: clk-mt8186-topckgen: Migrate to mtk_clk_simple_probe()
  clk: mediatek: clk-mt8192: Migrate topckgen to mtk_clk_simple_probe()
  clk: mediatek: clk-mtk: Register MFG notifier in mtk_clk_simple_probe()
  clk: mediatek: clk-mt8183: Join top_aud_muxes and top_aud_divs
  clk: mediatek: mt8186: Join top_adj_div and top_muxes
  clk: mediatek: mt8192: Join top_adj_divs and top_muxes
  clk: mediatek: clk-mt8192: Move CLK_TOP_CSW_F26M_D2 in top_divs
  clk: mediatek: mt8173: Migrate pericfg/topckgen to mtk_clk_simple_probe()
  clk: mediatek: clk-mtk: Extend mtk_clk_simple_probe()
  clk: mediatek: Switch to mtk_clk_simple_probe() where possible
  clk: mediatek: mt8173: Break down clock drivers and allow module build
  ...

* clk-imx:
  clk: imx: pll14xx: fix recalc_rate for negative kdiv
  MAINTAINERS: clk: imx: Add Peng Fan as reviewer
  clk: imx: fix compile testing imxrt1050
  clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
  clk: imx6ul: add ethernet refclock mux support
  clk: imx6ul: fix enet1 gate configuration
  clk: imx: add imx_obtain_fixed_of_clock()
  clk: imx6q: add ethernet refclock mux support
  clk: imx: add clk-gpr-mux driver
  dt-bindings: imx8ulp: clock: no spaces before tabs
  clk: imx6sll: add proper spdx license identifier
  clk: imx: imx93: invoke imx_register_uart_clocks
  clk: imx: remove clk_count of imx_register_uart_clocks
  clk: imx: get stdout clk count from device tree
  clk: imx: avoid memory leak

* clk-core:
  clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()

Author: bebarino

Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt

@@ -10,6 +10,7 @@ Required Properties:
 	- "mediatek,mt7622-ethsys", "syscon"
 	- "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
 	- "mediatek,mt7629-ethsys", "syscon"
+	- "mediatek,mt7981-ethsys", "syscon"
 	- "mediatek,mt7986-ethsys", "syscon"
 - #clock-cells: Must be 1
 - #reset-cells: Must be 1

Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml

@@ -28,6 +28,7 @@ properties:
               - mediatek,mt6797-infracfg
               - mediatek,mt7622-infracfg
               - mediatek,mt7629-infracfg
+              - mediatek,mt7981-infracfg
               - mediatek,mt7986-infracfg
               - mediatek,mt8135-infracfg
               - mediatek,mt8167-infracfg

Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-clock.yaml

@@ -28,11 +28,9 @@ properties:
           - mediatek,mt8195-imp_iic_wrap_s
           - mediatek,mt8195-imp_iic_wrap_w
           - mediatek,mt8195-mfgcfg
-          - mediatek,mt8195-vppsys0
           - mediatek,mt8195-wpesys
           - mediatek,mt8195-wpesys_vpp0
           - mediatek,mt8195-wpesys_vpp1
-          - mediatek,mt8195-vppsys1
           - mediatek,mt8195-imgsys
           - mediatek,mt8195-imgsys1_dip_top
           - mediatek,mt8195-imgsys1_dip_nr
@@ -92,13 +90,6 @@ examples:
         #clock-cells = <1>;
     };
 
-  - |
-    vppsys0: clock-controller@14000000 {
-        compatible = "mediatek,mt8195-vppsys0";
-        reg = <0x14000000 0x1000>;
-        #clock-cells = <1>;
-    };
-
   - |
     wpesys: clock-controller@14e00000 {
         compatible = "mediatek,mt8195-wpesys";
@@ -120,13 +111,6 @@ examples:
         #clock-cells = <1>;
     };
 
-  - |
-    vppsys1: clock-controller@14f00000 {
-        compatible = "mediatek,mt8195-vppsys1";
-        reg = <0x14f00000 0x1000>;
-        #clock-cells = <1>;
-    };
-
   - |
     imgsys: clock-controller@15000000 {
         compatible = "mediatek,mt8195-imgsys";

Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt

@@ -8,6 +8,8 @@ Required Properties:
 - compatible: Should be:
 	- "mediatek,mt7622-sgmiisys", "syscon"
 	- "mediatek,mt7629-sgmiisys", "syscon"
+	- "mediatek,mt7981-sgmiisys_0", "syscon"
+	- "mediatek,mt7981-sgmiisys_1", "syscon"
 	- "mediatek,mt7986-sgmiisys_0", "syscon"
 	- "mediatek,mt7986-sgmiisys_1", "syscon"
 - #clock-cells: Must be 1

Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml

@@ -20,6 +20,7 @@ properties:
       - enum:
           - mediatek,mt6797-apmixedsys
           - mediatek,mt7622-apmixedsys
+          - mediatek,mt7981-apmixedsys
           - mediatek,mt7986-apmixedsys
           - mediatek,mt8135-apmixedsys
           - mediatek,mt8173-apmixedsys

Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml

@@ -35,6 +35,7 @@ properties:
               - mediatek,mt6779-topckgen
               - mediatek,mt6795-topckgen
               - mediatek,mt7629-topckgen
+              - mediatek,mt7981-topckgen
               - mediatek,mt7986-topckgen
               - mediatek,mt8167-topckgen
               - mediatek,mt8183-topckgen

MAINTAINERS

@@ -14993,6 +14993,7 @@ F:	drivers/iio/gyro/fxas21002c_spi.c
 
 NXP i.MX CLOCK DRIVERS
 M:	Abel Vesa <[email protected]>
+R:	Peng Fan <[email protected]>
 L:	[email protected]
 L:	[email protected]
 S:	Maintained

drivers/clk/at91/Makefile

@@ -3,7 +3,7 @@
 # Makefile for at91 specific clk
 #
 
-obj-y += pmc.o sckc.o dt-compat.o
+obj-y += pmc.o sckc.o
 obj-y += clk-slow.o clk-main.o clk-pll.o clk-plldiv.o clk-master.o
 obj-y += clk-system.o clk-peripheral.o clk-programmable.o
 
@@ -15,12 +15,12 @@ obj-$(CONFIG_HAVE_AT91_H32MX)		+= clk-h32mx.o
 obj-$(CONFIG_HAVE_AT91_GENERATED_CLK)	+= clk-generated.o
 obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK)	+= clk-i2s-mux.o
 obj-$(CONFIG_HAVE_AT91_SAM9X60_PLL)	+= clk-sam9x60-pll.o
-obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
-obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o
-obj-$(CONFIG_SOC_AT91SAM9) += at91sam9g45.o
-obj-$(CONFIG_SOC_AT91SAM9) += at91sam9n12.o at91sam9x5.o
+obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o dt-compat.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o dt-compat.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam9g45.o dt-compat.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam9n12.o at91sam9x5.o dt-compat.o
 obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o
-obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o
-obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
-obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o
+obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o dt-compat.o
+obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o dt-compat.o
+obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o dt-compat.o
 obj-$(CONFIG_SOC_SAMA7G5) += sama7g5.o

drivers/clk/at91/at91rm9200.c

@@ -183,7 +183,7 @@ static void __init at91rm9200_pmc_setup(struct device_node *np)
 	for (i = 0; i < ARRAY_SIZE(at91rm9200_systemck); i++) {
 		hw = at91_clk_register_system(regmap, at91rm9200_systemck[i].n,
 					      at91rm9200_systemck[i].p,
-					      at91rm9200_systemck[i].id);
+					      at91rm9200_systemck[i].id, 0);
 		if (IS_ERR(hw))
 			goto err_free;
 

drivers/clk/at91/at91sam9260.c

@@ -460,7 +460,7 @@ static void __init at91sam926x_pmc_setup(struct device_node *np,
 	for (i = 0; i < data->num_sck; i++) {
 		hw = at91_clk_register_system(regmap, data->sck[i].n,
 					      data->sck[i].p,
-					      data->sck[i].id);
+					      data->sck[i].id, 0);
 		if (IS_ERR(hw))
 			goto err_free;