ARM: pxa: use pdev resource for palmld mmio

The palmld header is almost unused in drivers, the only
remaining thing now is the PATA device address, which should
really be passed as a resource.

Cc: [email protected]
Acked-by: Robert Jarzmik <[email protected]>
Acked-by: Bartlomiej Zolnierkiewicz <[email protected]>
Acked-by: Damien Le Moal <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>

Author: arndb

arch/arm/mach-pxa/palmld-pcmcia.c

@@ -13,9 +13,10 @@
 #include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-#include <mach/palmld.h>
 #include <pcmcia/soc_common.h>
 
+#include "palmld.h"
+
 static struct gpio palmld_pcmcia_gpios[] = {
 	{ GPIO_NR_PALMLD_PCMCIA_POWER,	GPIOF_INIT_LOW,	"PCMCIA Power" },
 	{ GPIO_NR_PALMLD_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },

arch/arm/mach-pxa/palmld.c

@@ -29,8 +29,8 @@
 #include <asm/mach/map.h>
 
 #include "pxa27x.h"
+#include "palmld.h"
 #include <linux/platform_data/asoc-pxa.h>
-#include <mach/palmld.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
@@ -279,9 +279,15 @@ static inline void palmld_leds_init(void) {}
  * HDD
  ******************************************************************************/
 #if defined(CONFIG_PATA_PALMLD) || defined(CONFIG_PATA_PALMLD_MODULE)
+static struct resource palmld_ide_resources[] = {
+	DEFINE_RES_MEM(PALMLD_IDE_PHYS, 0x1000),
+};
+
 static struct platform_device palmld_ide_device = {
-	.name	= "pata_palmld",
-	.id	= -1,
+	.name		= "pata_palmld",
+	.id		= -1,
+	.resource	= palmld_ide_resources,
+	.num_resources	= ARRAY_SIZE(palmld_ide_resources),
 };
 
 static struct gpiod_lookup_table palmld_ide_gpio_table = {

arch/arm/mach-pxa/include/mach/palmld.h renamed to arch/arm/mach-pxa/palmld.h

@@ -9,7 +9,7 @@
 #ifndef _INCLUDE_PALMLD_H_
 #define _INCLUDE_PALMLD_H_
 
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 /** HERE ARE GPIOs **/
 

drivers/ata/pata_palmld.c

@@ -25,7 +25,6 @@
 #include <linux/gpio/consumer.h>
 
 #include <scsi/scsi_host.h>
-#include <mach/palmld.h>
 
 #define DRV_NAME "pata_palmld"
 
@@ -63,7 +62,7 @@ static int palmld_pata_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	/* remap drive's physical memory address */
-	mem = devm_ioremap(dev, PALMLD_IDE_PHYS, 0x1000);
+	mem = devm_platform_ioremap_resource(pdev, 0);
 	if (!mem)
 		return -ENOMEM;