Merge tag 'usb-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of USB driver fixes for 3.12-rc3.

  These are all for host controller issues that have been reported, and
  there's a fix for an annoying error message that gets printed every
  time you remove a USB 3 device from the system that's been bugging me
  for a while"

* tag 'usb-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: dwc3: add support for Merrifield
  USB: fsl/ehci: fix failure of checking PHY_CLK_VALID during reinitialization
  USB: Fix breakage in ffs_fs_mount()
  fsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phy
  usb/core/devio.c: Don't reject control message to endpoint with wrong direction bit
  usb: chipidea: USB_CHIPIDEA should depend on HAS_DMA
  usb: chipidea: udc: free pending TD at removal procedure
  usb: chipidea: imx: Add usb_phy_shutdown at probe's error path
  usb: chipidea: Fix memleak for ci->hw_bank.regmap when removal
  usb: chipidea: udc: fix the oops after rmmod gadget
  USB: fix PM config symbol in uhci-hcd, ehci-hcd, and xhci-hcd
  USB: OHCI: accept very late isochronous URBs
  USB: UHCI: accept very late isochronous URBs
  USB: iMX21: accept very late isochronous URBs
  usbcore: check usb device's state before sending a Set SEL control transfer
  xhci: Fix race between ep halt and URB cancellation
  usb: Fix xHCI host issues on remote wakeup.
  xhci: Ensure a command structure points to the correct trb on the command ring
  xhci: Fix oops happening after address device timeout

Author: torvalds

drivers/usb/chipidea/Kconfig

@@ -1,6 +1,6 @@
 config USB_CHIPIDEA
 	tristate "ChipIdea Highspeed Dual Role Controller"
-	depends on (USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)
+	depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA
 	help
 	  Say Y here if your system has a dual role high speed USB
 	  controller based on ChipIdea silicon IP. Currently, only the

drivers/usb/chipidea/ci_hdrc_imx.c

@@ -131,7 +131,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 		if (ret) {
 			dev_err(&pdev->dev, "usbmisc init failed, ret=%d\n",
 					ret);
-			goto err_clk;
+			goto err_phy;
 		}
 	}
 
@@ -143,7 +143,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev,
 			"Can't register ci_hdrc platform device, err=%d\n",
 			ret);
-		goto err_clk;
+		goto err_phy;
 	}
 
 	if (data->usbmisc_data) {
@@ -164,6 +164,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 
 disable_device:
 	ci_hdrc_remove_device(data->ci_pdev);
+err_phy:
+	if (data->phy)
+		usb_phy_shutdown(data->phy);
 err_clk:
 	clk_disable_unprepare(data->clk);
 	return ret;

drivers/usb/chipidea/core.c

@@ -605,6 +605,7 @@ static int ci_hdrc_remove(struct platform_device *pdev)
 	dbg_remove_files(ci);
 	free_irq(ci->irq, ci);
 	ci_role_destroy(ci);
+	kfree(ci->hw_bank.regmap);
 
 	return 0;
 }

drivers/usb/chipidea/udc.c

@@ -1600,6 +1600,8 @@ static void destroy_eps(struct ci_hdrc *ci)
 	for (i = 0; i < ci->hw_ep_max; i++) {
 		struct ci_hw_ep *hwep = &ci->ci_hw_ep[i];
 
+		if (hwep->pending_td)
+			free_pending_td(hwep);
 		dma_pool_free(ci->qh_pool, hwep->qh.ptr, hwep->qh.dma);
 	}
 }
@@ -1667,13 +1669,13 @@ static int ci_udc_stop(struct usb_gadget *gadget,
 		if (ci->platdata->notify_event)
 			ci->platdata->notify_event(ci,
 			CI_HDRC_CONTROLLER_STOPPED_EVENT);
-		ci->driver = NULL;
 		spin_unlock_irqrestore(&ci->lock, flags);
 		_gadget_stop_activity(&ci->gadget);
 		spin_lock_irqsave(&ci->lock, flags);
 		pm_runtime_put(&ci->gadget.dev);
 	}
 
+	ci->driver = NULL;
 	spin_unlock_irqrestore(&ci->lock, flags);
 
 	return 0;

drivers/usb/core/devio.c

@@ -742,6 +742,22 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype,
 		if ((index & ~USB_DIR_IN) == 0)
 			return 0;
 		ret = findintfep(ps->dev, index);
+		if (ret < 0) {
+			/*
+			 * Some not fully compliant Win apps seem to get
+			 * index wrong and have the endpoint number here
+			 * rather than the endpoint address (with the
+			 * correct direction). Win does let this through,
+			 * so we'll not reject it here but leave it to
+			 * the device to not break KVM. But we warn.
+			 */
+			ret = findintfep(ps->dev, index ^ 0x80);
+			if (ret >= 0)
+				dev_info(&ps->dev->dev,
+					"%s: process %i (%s) requesting ep %02x but needs %02x\n",
+					__func__, task_pid_nr(current),
+					current->comm, index, index ^ 0x80);
+		}
 		if (ret >= 0)
 			ret = checkintf(ps, ret);
 		break;

drivers/usb/core/hub.c

@@ -3426,6 +3426,9 @@ static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state)
 	unsigned long long u2_pel;
 	int ret;
 
+	if (udev->state != USB_STATE_CONFIGURED)
+		return 0;
+
 	/* Convert SEL and PEL stored in ns to us */
 	u1_sel = DIV_ROUND_UP(udev->u1_params.sel, 1000);
 	u1_pel = DIV_ROUND_UP(udev->u1_params.pel, 1000);

drivers/usb/dwc3/dwc3-pci.c

@@ -29,6 +29,7 @@
 #define PCI_VENDOR_ID_SYNOPSYS		0x16c3
 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3	0xabcd
 #define PCI_DEVICE_ID_INTEL_BYT		0x0f37
+#define PCI_DEVICE_ID_INTEL_MRFLD	0x119e
 
 struct dwc3_pci {
 	struct device		*dev;
@@ -189,6 +190,7 @@ static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = {
 				PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
 	},
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), },
 	{  }	/* Terminating Entry */
 };
 MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);

drivers/usb/gadget/f_fs.c

@@ -1034,37 +1034,19 @@ struct ffs_sb_fill_data {
 	struct ffs_file_perms perms;
 	umode_t root_mode;
 	const char *dev_name;
-	union {
-		/* set by ffs_fs_mount(), read by ffs_sb_fill() */
-		void *private_data;
-		/* set by ffs_sb_fill(), read by ffs_fs_mount */
-		struct ffs_data *ffs_data;
-	};
+	struct ffs_data *ffs_data;
 };
 
 static int ffs_sb_fill(struct super_block *sb, void *_data, int silent)
 {
 	struct ffs_sb_fill_data *data = _data;
 	struct inode	*inode;
-	struct ffs_data	*ffs;
+	struct ffs_data	*ffs = data->ffs_data;
 
 	ENTER();
 
-	/* Initialise data */
-	ffs = ffs_data_new();
-	if (unlikely(!ffs))
-		goto Enomem;
-
 	ffs->sb              = sb;
-	ffs->dev_name        = kstrdup(data->dev_name, GFP_KERNEL);
-	if (unlikely(!ffs->dev_name))
-		goto Enomem;
-	ffs->file_perms      = data->perms;
-	ffs->private_data    = data->private_data;
-
-	/* used by the caller of this function */
-	data->ffs_data       = ffs;
-
+	data->ffs_data       = NULL;
 	sb->s_fs_info        = ffs;
 	sb->s_blocksize      = PAGE_CACHE_SIZE;
 	sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
@@ -1080,17 +1062,14 @@ static int ffs_sb_fill(struct super_block *sb, void *_data, int silent)
 				  &data->perms);
 	sb->s_root = d_make_root(inode);
 	if (unlikely(!sb->s_root))
-		goto Enomem;
+		return -ENOMEM;
 
 	/* EP0 file */
 	if (unlikely(!ffs_sb_create_file(sb, "ep0", ffs,
 					 &ffs_ep0_operations, NULL)))
-		goto Enomem;
+		return -ENOMEM;
 
 	return 0;
-
-Enomem:
-	return -ENOMEM;
 }
 
 static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts)
@@ -1193,25 +1172,38 @@ ffs_fs_mount(struct file_system_type *t, int flags,
 	struct dentry *rv;
 	int ret;
 	void *ffs_dev;
+	struct ffs_data	*ffs;
 
 	ENTER();
 
 	ret = ffs_fs_parse_opts(&data, opts);
 	if (unlikely(ret < 0))
 		return ERR_PTR(ret);
 
+	ffs = ffs_data_new();
+	if (unlikely(!ffs))
+		return ERR_PTR(-ENOMEM);
+	ffs->file_perms = data.perms;
+
+	ffs->dev_name = kstrdup(dev_name, GFP_KERNEL);
+	if (unlikely(!ffs->dev_name)) {
+		ffs_data_put(ffs);
+		return ERR_PTR(-ENOMEM);
+	}
+
 	ffs_dev = functionfs_acquire_dev_callback(dev_name);
-	if (IS_ERR(ffs_dev))
-		return ffs_dev;
+	if (IS_ERR(ffs_dev)) {
+		ffs_data_put(ffs);
+		return ERR_CAST(ffs_dev);
+	}
+	ffs->private_data = ffs_dev;
+	data.ffs_data = ffs;
 
-	data.dev_name = dev_name;
-	data.private_data = ffs_dev;
 	rv = mount_nodev(t, flags, &data, ffs_sb_fill);
-
-	/* data.ffs_data is set by ffs_sb_fill */
-	if (IS_ERR(rv))
+	if (IS_ERR(rv) && data.ffs_data) {
 		functionfs_release_dev_callback(data.ffs_data);
-
+		ffs_data_put(data.ffs_data);
+	}
 	return rv;
 }
 

drivers/usb/host/ehci-fsl.c

@@ -130,7 +130,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	}
 
 	/* Enable USB controller, 83xx or 8536 */
-	if (pdata->have_sysif_regs)
+	if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6)
 		setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);
 
 	/* Don't need to set host mode here. It will be done by tdi_reset() */
@@ -232,15 +232,9 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
 	case FSL_USB2_PHY_ULPI:
 		if (pdata->have_sysif_regs && pdata->controller_ver) {
 			/* controller version 1.6 or above */
+			clrbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
 			setbits32(non_ehci + FSL_SOC_USB_CTRL,
-					ULPI_PHY_CLK_SEL);
-			/*
-			 * Due to controller issue of PHY_CLK_VALID in ULPI
-			 * mode, we set USB_CTRL_USB_EN before checking
-			 * PHY_CLK_VALID, otherwise PHY_CLK_VALID doesn't work.
-			 */
-			clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
-					UTMI_PHY_EN, USB_CTRL_USB_EN);
+				ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN);
 		}
 		portsc |= PORT_PTS_ULPI;
 		break;
@@ -270,8 +264,9 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
 	if (pdata->have_sysif_regs && pdata->controller_ver &&
 	    (phy_mode == FSL_USB2_PHY_ULPI)) {
 		/* check PHY_CLK_VALID to get phy clk valid */
-		if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
-				PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) {
+		if (!(spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
+				PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0) ||
+				in_be32(non_ehci + FSL_SOC_USB_PRICTRL))) {
 			printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n");
 			return -EINVAL;
 		}

drivers/usb/host/ehci-pci.c

@@ -361,7 +361,7 @@ static struct pci_driver ehci_pci_driver = {
 	.remove =	usb_hcd_pci_remove,
 	.shutdown = 	usb_hcd_pci_shutdown,
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
 	.driver =	{
 		.pm =	&usb_hcd_pci_pm_ops
 	},